Extraction-spectrophotometric determination of trace iron (II) in sea water with 2-[2-(3,5-dibromopyridyl)azo]-5-diethylaminobenzoic acid

An extraction-spectrophotometric method is described for the determination of traces of iron(II) with 2-[2-(3,5-dibromopyridyl)azo]-5-diethyl-aminobenzoic acid. The reagent forms a stable and blue 12 iron/reagent complex that can be extracted into chloroform. The apparent molar absorptivity of the iron(II) complex is 1.09 × 10⁵ 1 mol^–1 cm^–1 at 624 nm in chloroform. The reagent is relatively selective; interferences from cobalt, copper, nickel and vanadium can be removed by using dimethylglyoxime and EDTA. The method is applied to the determination of iron (II) in sea water and aluminium alloys with good precision and accuracy.     

2-[2-(5-Bromopyridyl)azo]-5-dimethylaminophenol; a new sensitive reagent for cadmium

Cadmium(II) reacts with 2-[2-(5-bromopyridyl)azo]-5-dimethyl-aminophenol (5-Br-DMPAP) in aqueous solution; the complex can be extracted with organic solvents such as chloroform, 3-methyl-l-butanol and methyl isobutyl ketone at pH 8–10.5 to give a red solution which absorbs at 525–555 nm. The absorbance in organic solvents is stable and the system conforms to Beer's law; the optimal range in 3-methyl-1-butanol for measurement in 1.00-cm cells is 0.01–l p.p.m. cadmium. Moderate amounts of many cations and anions do not interfere, and interfering cations such as zinc, copper, manganese and nickel can be separated by extraction with dithizone. The 5-Br-DMPAP method is one of the most sensitive procedures available for the determination of cadmium; the molar absorptivity in a 3-methyl-1-butanol extract is 1.41·10⁵ 1 mol^?1 cm^?1 at 555 nm.     

Isonitroso-4-Methyl-2-Pentanone for Solvent Extraction and Spectrophotometric Determination of Palladium (II) at Trace Level

Abstract

Isonitroso-4-methyl-2-pentanone (HIMP) is proposed as a new reagent for extraction and photometric determination of Pd(II). The reagent forms a yellow complex with palladium in the pH range 4.0-5.0. The complex extracted into chloroform was measured at 330 nm. The molar absorptivity was found to be 5.37 × 10³ 1 mol^?1 cm^?1 and Sandell's sensitivity 20 ng cm^?2 Beer's law was obeyed over the concentration range 0.1-10.0 μg/ml of palladium. The method is applicable for palladium estimation in Ores and catalysts.     

Spectrophotometic Determination Of Tin In Steels With2-(5-Nltro-2-Pyridylazo)-5-[N-n-Propyl-N-(3-Sulfopropyl)Amino]phenol

ABSTRACT

A highly sensitive azo dye, 2-(5-nitro-2-pyridylazo)-5-[N-n-propyl-N-(3-sulfopropyl)amino]phenol (Nitro-PAPS), is used as a colorimetric reagent for the determination of tin(IV) content. Nitro-PAPS reacts with tin(IV) to form a water-soluble complex in 1.0 M acetic acid. Full color development is attained within 5 minutes, and maintains constant absorbance for at least 24 hours. The apparent molar absorptivity is 7.7 x 10⁴ dm³ mol^?1 cm^?1 at a maximum wavelength of 580 ran. Beer's law is obeyed for tin(IV) in the range of 0-1.2 μg ml^?1. The proposed method is successfully applied to the determination of trace amounts of tin in steels.     

Field determination of fluoride in drinking water using a polymeric aluminium complex of 5-(2-carboxyphenylazo)-8-hydroxyquinoline impregnated paper

A simple field method which allows the determination of fluoride in drinking water with a small handheld instrument called Arsenator was developed. Arsenator is a commercially available instrument which was used successfully for reliable determination of arsenic. In the proposed method the functionality of the Arsenator which is based on a photometric measurement of a spot on the reagent paper is expanded to analyse fluoride. A polymeric aluminium complex of 5-(2-carboxyphenylazo)-8-hydroxyquinoline (LH₂) has been prepared as a new specific reagent for fluoride. Job's method of continuous variation was adopted for the determination of the composition of the coloured complex, which was further characterized by UV-VIS spectroscopic studies. The molar absorptivity of the complex formation is 8.48?×?10³?L?mol^?1?cm^?1 at 410?nm. The coloured complex reacts with fluoride on an impregnated paper where its colour changes are dependent on the concentration of fluoride in water samples. The change in the colour was measured using the Arsenator. The method allows a reliable determination of fluoride in the range 0.3 to 2.0?mg?L^?1. Further spectophotometric determinations of fluoride in drinking water were also studied. The determination is based on the reaction of aluminium complex with fluoride in the examined samples. Beer's law is obeyed in the range 0.3 to 2.0?mg?L^?1 of fluoride at 495?nm. Sensitivity, detection limit and quantitation limit of the method were found to be 0.251?±?0.007?µg^?1?mL, 0.1?mg?L^?1 and 0.3?mg?L^?1, respectively. The optimum reaction conditions and other analytical conditions were evaluated. The effect of interfering ions on the determination is described. There is no interference by nitrate or chloride. Sulphate interfered only at high concentrations which are not expected in drinking water.     

Extraction—spectrophotometric and fluorimetric determination of thallium with 2-(4-methoxyphenyl)-5,7-diphenyl-4h-l,3,4-thiadiazolo[3,2-α] pyridinium chloride

The synthesis, characteristics and applications of 2-(4-methoxyphenyl)-5,7-diphenyl-4H⁺-1, 3,4-thiadiazolo[3,2-α]pyridinium chloride (TDZP) as a reagent for the formation of ion-pair complexes is described. Tetrachlorothatllate(III) can be extracted into isoamyl acetate as an ion-pair with TDZP. Thallium can be determined spectrophotometrically and fluorimetrically in the range 1–25 and 0.1–2 μg of thallium per 5 ml of organic layer, respectively. The molar absorptivity is 3.9 × 10⁴ l mol^-1 cm^-1. The quantum efficiency of the reagent is 0.42. The method is applicable to the determination of thallium in sphalerites and zinc or cadmium concentrates.     

2-(8-quinolylazo)-4,5-diphenylimidazole — a sensitive extraction spectrophotometric reagent for mercury

Mercury(II) reacts with 2-(8-quinolylazo)-4,5-diphenylimidazole in aqueous solution; the complex can be extracted with chloroform or 1,2-dichloroethane at pH 4.5–9.5 to give a stable reddish-purple solution. The system conforms to Beer's law; the optimal range in chloroform is 0.05–2 ppm mercury (1-cm cells). Of 25 metal ions investigated, only copper and vanadium interfere seriously. The proposed method is exceptionally sensitive; the molar absorptivity in the chloroform extract is 7.3 × 10⁴ l mol^?1 cm^?1 at 580 nm; the Sandell sensitivity is 0.0027μg Hg cm^?2.     

Extraction—spectrophotometric determination of boron with 2,6-dihydroxybenzoic acid and 4-(4-diethyl-aminophenylazo)-n-methylpyridinium iodide,with application to steels

The sensitive and selective method reported is based on the reaction of boric acid with 2,6-dihydroxybenzoic acid in acidic aqueous solution to form a 1:2 complex anion which can be extracted into chloroform as an ion-pair with 4-(4-diethylaminophenylazo)-N-methylpyridinium ion. The ion-pair formed by the excess of reagents and co-extracted into chloroform, is removed by washing the organic phase with phosphate buffer solution (pH 7.0) and 0.025 M sulfuric acid solution. The absorbance of azo dye in chloroform is measured at 570 nm. Calibration graphs are linear in the range 0–1.5 × 10^-5 M of boron. The molar absorptivity is 6.6 × 10⁴ l mol^-1 cm^-1 and the absorbance of the reagent blank is 0.030. The method was applied to the determination of boron at the 0.001% level in steels.     

Synthesis and spectrophotometric study of 2-[2-(3,5-dibromopyridyl,)azo] -5-dimethylaminobenzoic acid as an analytical reagent: Determination of nickel

2-[2-(3,5-Dibrornopyridyl)azo]-5-dimethyIam;nobenzoic acid (3,5-diBr-PAMB) has been synthesized and its potential for the spectrophotometric determination of metals studied. It reacts sensitively with nickel, cobalt, iron and copper, and is particularly useful for nickel. The apparent molar absorptivity in chloroform is 1.50 × 10⁵ l mol^-1 cm^-1 and the Sandell sensitivity is 0.4 ng Ni cm^-2. Nickel reacts with 3.5-diBr-PAMB at pH 4–10; at pH 4–7 the complex can be extracted into chloroform to give a stable purple solution. The optimal calibration range is 0.04–0.4 ppm Ni. Only Cu, Co, Fe, Pd and V interfere seriously but Pd, Cu and V can be masked by thiourea.     

Solvent Extraction of Vanadium(V) as a Ternary Complex with N-Hydroxy-N-p-Chlorophenyl-N′-(2-Methyl-5-Chloro)-Phenyl-p-Toluamidine Hydrochloride and p-Chlorophenol

N-Hydroxy-N-p-chlorophenyl-N′-(2-methyl-5-chloro)-phenyl-p-toluamidine hydrochloride (HCPMCPTH) reacts with vanadium(V) to form a 1:2 (metal:reagent) blue-violet complex which can be quantitatively extracted into chloroform from acetic acid solutions. The deep blue adduct having 1:2:1 (V:HCPMCPTH:PCP) stoichiometry gets quantitatively extracted into chloroform from 0–2.5 M acetic acid media. The formation of the ternary complex has been made the basis for the development of a simple, rapid, sensitive and selective extractive-photometric method for the determination of microamounts of vanadium(V). The method has been applied to the determination of vanadium in steels.     

Direct and Second Order Analogue Derivative Extraction-Spectrophotometric Determination of Iron with 2 (4, 5-Dimethyl-2-Thiazolylazo)-4, 6-Dimethylphenol

Abstract

An extraction-spectrophotometric method for the determination of trace amounts of iron based on its extraction into chloroform with 2-(4, 5-dimethyl-2-thiazolylazo)-4, 6-dimethylphenol has been developed, which allows the determination of 5–28 μg Fe (?₇₇₃ = 1.38×10⁴ 1. mol^?1. cm^?1). The use of second order analogue derivative spectrophotometry allows the determination of down to 0.2–5 μg, Fe. The methods are quite selective and have been applied to the determination of iron in mineral waters.     

Extraction and Spectrophotometric Determination of Arsenic in the Environment

Abstract

A simple, sensitive and selective method for the determination of microamounts of arsenic (III) in the environment is described. Arsenic forms a yellow coloured complex with N-phenylbenzo-hydroxamic acid (PBHA) at pH 4.5-5.2 which can be extracted from chloroform. The effective molar absorptivity of As-PBHA extract is 1.1 × 1mol^?1cm^?1 at 410 nm. Many common ions associated with arsenic do not interfere. The effect of pH, reagent concentration and solvent is described. The arsenic in trace quantities is estimated in the industrial effluents, soil and glass samples.     

Rapid and Sensitive Spectrophotometric Determination of Hafuium(IV) With 2-(5-Bromo-2-Pyridylazo)-5-Diethylaminophenol

Abstract

Hafnium(IV) reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol in the pH range 3.3–11.0 to yield a sparingly soluble red-coloured chelate that can be dissolved with Triton X-100. Effect of initial pH of metal ion and order of addition of reagents was studied in detail. The 1:3 complex adheres to Beer's law over the concentration range 0.02–1.12 μg/ml of Hf(IV), has a molar absorptivity 1.33x10⁵ 1 mol^?1cm^?1, Sandell sensitivity 1.3 ng cm^?2, formation constant (log K) 11.94 and the method had a relative standard deviation of ± 1.5%. Effect of 60 diverse ions on the determination of hafnium(IV) was studied. This fairly selective method is the most sensitive so far reported for the spectrophotometric determination of hafnium(IV).     

Selective Spectrophotometric Determination of Palladium (II) With 2-(5-Bromo-2-Pyridylazo)-5-(Diethylamino)-Phenol

Abstract

A spectrophotometric study of the Pd(II) complex of a reagent 2-(5-Bromo-2-Pyridylazo)-5-(diethylamino)-Phenol (5-Br-PADAP) is presented. A violet complex is formed at pH 3.53, and shows maximal absorbance at 585 nm with molar absorptivity of 3.86 × 10⁴ 1. mol^?1 cm^?1. Beer's law is obeyed up to 50 μ of Pd(II). The method offers the advantages of simplicity, high precision, requires no extraction and is very selective, where 5.0 mg Pt(VI) and 0.3 mg Au(III) ions do not interfere.     

Extraction—Spectrophotometric determination of nickel with 2-hydroxy-1-naphthaldoxime

A method for the solvent extraction—spectrophotometric determination of nickel with 2-hydroxyl-1-naphthaldoxime (HNA) has been studied. The method is based upon the formation of a nickel—HNA complex which is extracted into chloroform from an aqueous solution of pH 5.8. The nickel—HNA complex in chloroform exhibits an absorption maximum at 410 nm with molar absorptivity of 8.1 × 10³ liters mol^?1 cm^?1. Beer's law is applicable in the range from 5 to 50 μg of nickel. The mole ratio of the complex and effect of interfering ions are described.     

Extraction—spectrophotometric determination of trace amounts of iron in waters with pyrogallol red and zephiramine

The simple removal of excess of co-extracted reagent in the solvent extraction of metal complex anions with a quaternary ammonium salt greatly improves the determination of iron(II) with pyrogallol red and zephiramine. The method with pyrogallol red is suitable for the determination of trace amounts of iron in natural waters. The apparent molar absorptivities of the iron(II) complex in chloroform are 7.5×10⁴ and 10.3×10⁴ 1 mol^-1 cm^-1 at 560 and 298 nm, respectively. A large excess of reagent can be added, and the ternary complex can be completely extracted over the pH range 8.5–10. Masking agents allow most interferences to be suppressed. The method is suitable for the analysis of potable, river and sea waters.     

Extraction-spectrophotometric determination of nickel as Ni-(PAR)2-(CTAB)2 complex in polymetallic sea-bed nodules and steels

A red, water-soluble complex of nickel with PAR can be extracted into chloroform with CTAB at pH 7.0. The system obeys Beer's law upto 0.5 μg/ml with a molar absorptivity of 45 200 L·mol^?1·cm^?1 at 540 nm. Job's method of continuous variations revealed that the composition of the extracting species is 1:2:2 for nickel:PAR:CTAB. Based on this extraction, a highly sensitive and selective spectrophotometric method for the determination of nickel in polymetallic sea-bed nodules and in steels, after prior separation of iron and manganese, was developed. The standard deviation was 0.04–0.127 μg for 5–25 μg of nickel.     

Extraction spectrophotometric investigation of mixed ligand complex of molybdenum(V) with thiocyanate and 4-acetyl-2-(acetylamino)-5-dimethyl-Δ2-1,3,4-thiadiazole

A sensitive spectrophotometric method is developed for the determination of small amounts of molybdenum based on the extraction of molybdenum-thiocyanate-4-acetyl-2-(acetylamino)-5-dimethyl- ²-1,3,4-thiadiazole complex into chloroform from hydrochloric acid medium which is orange red in colour. The complex has an absorption maximum at 470 nm with a molar absorptivity of 2.01×10⁴l·mole^–1·cm^–1. Beer's law is valid over the concentration range 0.06–2.5 ppm of molybdenum with an optimum concentration range of 0.15–2.2 ppm. The ternary complex is stable for over one week at room temperature. Equilibrium shift method indicates 142 composition for molybdenum-thio-cyanate-4-acetyl-2-(acetylamino)-5-dimethyl- ²-1,3,4-thiadiazole complex. The effects of acidity, reagent concentrations, time, temperature and diverse ions upon the absorbance of the complex are critically assessed. This method has been used successfully for the determination of molybdenum in molybdenum steels.     

Synergistic Spectrophotometric and Atomic Absorption Spectrometric Analysis of Zinc in Alloys and Environmental Samples with N-p-MEthoxyphenyl-2-Furylacrylohydroxamic Acid and Pyridylazo Reagents

Abstract

Zinc (II) was selectively extracted from aqueous solutions of pH 7.8–8.5 into chloroform with N-p-methoxyphenyl-2-furylacrylohydroxamic acid (MFHA). 1-(2-pyridylazo)-2-naphthol (PAN) or 2-[(5-nitro-2-pyridyl)azo]-1-naphthol (NPAN) were added to the extract to form intensely coloured ternary complexes measurable spectrophotometrically at 550 nm (? = 6.03 × 10⁴ 1 mol^?1 cm^?1) and 625 nm (? = 8.15 × 10⁴ mol^?1 cm^?1) respectively. For atomic absorption spectrometric analysis, methyl isobutyl ketone (MIBK) was used as extracting solvent instead of chloroform and the zinc-MFHA-MIBK extract was aspirated directly into an air-acetylene flame. The absorbance was measured at the 213.9 nm resonance line with a detection limit of 0.05 ppb, which was significantly better than the limit of 1.0 ppb achieved for zinc previously with flame AAS. The method tolerated a large number of anions and cations normally occurring with zinc in environmental samples, and was applied to the trace analysis of zinc in alloys, coal, plant tissues, animal tissues and natural waters. The combinations of MFHA and PAN/NPAN were chosen from eleven hydroxamic acids and nine pyridylazo reagents as detailed in the paper.     

Selective determination of selenium(IV) from environmental samples by UV-visible spectrophotometry using O-methoxyphenyl thiourea as a chelating ligand

A selective extraction–spectrophotometric method has been developed for determination of selenium(IV) using O-methoxyphenyl thiourea (OMePT) as a chelating agent. The basis of the proposed method is the spectrophotometric determination of selenium(IV)–OMePT complex obtained after extraction of selenium(IV) from 3.5 M hydrochloric acid media using OMePT in chloroform solvent. The complex shows maximum absorbance at 350 nm against the reagent blank. The Beer’s law was obeyed over the concentration range 5–60 µg mL^?1 of selenium(IV). The optimum concentration range was 20–50 µg mL^?1 as evaluated from Ringbom’s plot. The molar absorptivity and Sandell’s sensitivity of the selenium(IV)–OMePT complex in chloroform were 3.312 × 10² L mol^?1cm^?1 and 0.2384 µg cm^?2, respectively. The composition of selenium(IV)–OMePT complex was 1:2 established from slope ratio method, mole ratio method and Job’s continuous variation method. The complex was stable for more than 72 h. The interfering effect of various foreign ions was studied and suitable masking agents were used wherever necessary to enhance the selectivity of the developed method. The proposed method was successfully applied for the determination of selenium(IV) from real samples, viz. pharmaceutical formulations, shampoo, vegetable sample, synthetic mixtures and environmental samples. Repetition of the method was checked by finding the relative standard deviation (RSD) for 10 determinations which was 0.35%.