水溶性荧光聚合物用于测定聚赖氨酸

合成了一种水溶性荧光聚合物聚[5-甲氧基-2-(3-磺酰化丙氧基)-1,4-苯撑乙烯](MPS-PPV),对该聚合物进行了元素分析、红外光谱及透射电子显微镜表征.实验结果表明,聚赖氨酸(PLL)对该聚合物荧光具有明显的猝灭作用,据此建立了一种快速灵敏测定聚赖氨酸的新方法,检出限为5.0×10^-10mol/L.探讨了聚赖氨酸猝灭MPS-PPV荧光的机理.     

水溶性荧光共轭聚合物MPS-PPV的聚合新方法及其荧光波长调控研究

在NaOH/C_2H_5OH/DMF液中,实现了水溶性阴离子荧光共轭聚合物聚-[5-甲氧基-2-(3-磺酰化丙氧基)-1,4-苯撑乙烯](MPS-PPV)单体的快速聚合并提高了聚合产率.通过改变溶液中NaOH的浓度,实现了聚合物荧光发射波长的调控.对聚合物进行了元素分析、红外光谱以及分子量的表征,并探讨了不同聚合条件下得到的MPS-PPV的荧光和紫外光谱变化.研究了过氧化氢对MPS-PPV荧光发射波长及强度的影响,据此可测定过氧化氢.与单纯依赖荧光强度变化的过氧化氢检测法比,此法具有更高的选择性,为基于荧光聚合物的新型传感器研制提供了新思路.     

Ionic strength and solvent control over the physical structure, electronic properties and superquenching of conjugated polyelectrolytes

In this paper, we investigate the photophysical properties of the conjugated poly electrolyte poly(2-methoxy-5-propyloxy sulfonate phenylene vinylene) (MPS-PPV), dissolved in both water and DMSO as a function of the solution ionic strength. Dynamic light scattering indicates that MPS-PPV chains exist in a highly agglomerated conformation in both solvents, and that the size of the agglomerates depends on both the ionic strength and the charge of the counter-ion. Even though the degree of agglomeration is similar in the two solvents, we find that the fluorescence quantum yield of MPS-PPV in DMSO is nearly 100-times greater than that in water. Moreover, intensity-dependent femtosecond pump-probe experiments show that there is a significant degree of exciton-exciton annihilation in water but not in DMSO, suggesting that the MPS-PPV chromophores interact to form interchain electronic species that quench the emission in water. Given that the emission quenching properties depend sensitively on the chain conformation and degree of chromophore contact, we also explore the superquenching may be either enhanced or diminished in either of the solvents via addition of simple salts, and we present a molecular picture to rationalize how the conformational properties of conjugated polyelectrolytes can be tuned to enhance their emissive behavior for sensing applications.     

水溶性荧光共轭聚合物MPS-PPV的聚合新方法及其荧光波长调控的研究

在NaOH/C2H5OH/DMF溶液中,实现了水溶性阴离子荧光共轭聚合物聚-[5-甲氧基-2-(3-磺酰化丙氧基)-1,4-苯撑乙烯](MPS-PPV)单体的快速聚合并提高了聚合产率。通过改变溶液中NaOH的浓度,实现了对聚合物荧光发射波长的调控。对聚合物进行了元素分析、红外光谱以及分子量的表征,并探讨了不同聚合条件下得到的MPS-PPV的荧光和紫外光谱变化。研究了过氧化氢对MPS-PPV荧光的影响,为基于荧光聚合物的新型传感器的研制提供了新思路。     

表面活性剂对共轭聚合物荧光性质及电荷转移的影响

探讨了表面活性剂存在下, 水溶性阴离子共轭聚合物聚[5-甲氧基-2-(3-磺酰化丙氧基)-1,4-苯撑乙烯](简写为MPS-PPV)的微环境变化对荧光性质及电荷转移的影响. 结果表明, 阳离子表面活性剂及非离子表面活性剂使MPS-PPV荧光增强, 阴离子表面活性剂使其荧光先增强后减弱; 在MPS-PPV/表面活性剂体系中加入电子接受体Pd^2＋, 发现非离子表面活性剂体系的荧光猝灭效率提高, 阴离子及阳离子表面活性剂体系荧光猝灭效率下降. 此研究对研制基于阴离子共聚物的新型生物化学传感器具有一定的指导意义.     

Relative size selection of a conjugated polyelectrolyte in virus-like protein structures

A conjugated polyelectrolyte poly[(2-methoxy-5-propyloxy sulfonate)-phenyl-ene vinylene] (MPS-PPV) drives the assembly of virus capsid proteins to form single virus-like particles (VLPs) and aggregates with more than two VLPs, with a relative selection of high molecular weight polymer in the latter.     

Enhancing the emissive properties of poly(p-phenylenevinylene)-conjugated polyelectrolyte-coated SiO2 nanoparticles

Here we describe single-particle imaging studies conducted on the conjugated polyelecrolyte poly[5-methoxy-2-(3-sulfopropoxy)-1,4-phenylenevinylene] (MPS-PPV) supported on SiO(2) nanoparticles. The particles are subjected to a time-programmed sequence involving addition and removal of different additives, including excited-triplet-state quenchers and scavengers of singlet oxygen as well as ground-state oxygen. Our studies show that these additives enhance the emission intensity and photostability of the nanoparticles and may further repair photodamaged conjugated polymer. The ability to monitor the emission from individual particles along multiple cycles under a range of conditions provides a mechanistic insight into the action of these additives.     

Enhanced conjugated polymer fluorescence quenching by dipyridinium-based quenchers in the presence of surfactant

Poly[(2-methoxy-5-propyloxysulfonate)phenylene vinylene] (MPS-PPV) was synthesized directly from its bischloromethylated monomer, considerably reducing the total number of steps involved in the polymer preparation. For the first time, a simple technique of ultracentrifugation was employed for final purification of the polymer. The interactions among the polymer, surfactant, and quencher molecules, as well as amplified fluorescence quenching and fluorescence enhancement associated with the interactions, were investigated and discussed. When compared with methyl viologen [MV]2+, higher values of Stern-Volmer constant K(SV) values on the order of > or =10(7) M(-1) were observed for the newly synthesized N-(2-carboxyhexadecanoyl)-N'-methyl-4,4'-bipyridinium iodide bromide ([CHMB]2+) quencher in the presence of 1,2-dioleoyl-3- trimethylammonium propane (DOTAP) surfactant. Comparisons of surfactants demonstrated that the K(SV) of [CHMB]2+ was 10-fold higher in the presence of dodecyltrimethylammonium bromide (DTAB) surfactant than with DOTAP. Polymer fluorescence was totally recovered upon addition of DOTAP surfactant to a MV-quenched polymer system, whereas only 50% of fluorescence was recovered upon addition of DOTAP surfactant to the CHMB-quenched polymer solution. In contrast, no fluorescence was recovered when DTAB was added to either the MV- or CHMB-quenched polymer systems. Thus, fluorescence enhancement was observed for the polymer complex with DOTAP, whereas fluorescence quenching was predominant in the polymer complex with DTAB. Such studies will not only help to better understand the intrinsic properties of the ionic conjugated polymer and amplified fluorescence quenching and enhancement but also provide guidelines to develop the next generation of ionic conjugated-polymer-based biosensors.     

Transfer of amido groups from isolated rhodium(I) amides to alkenes and vinylarenes

The reaction of monomeric and dimeric rhodium(I) amido complexes with unactivated olefins to generate imines is reported. Transamination of {(PEt(3))(2)RhN(SiMePh(2))(2)} (1a) or its -N(SiMe(3))(2) analogue 1b with p-toluidine gave the dimeric [(PEt(3))(2)Rh(mu-NHAr)](2) (Ar = p-tolyl) (2a) in 80% isolated yield. Reaction of 2a with PEt(3) generated the monomeric (PEt(3))(3)Rh(NHAr) (Ar = p-tolyl) (3a). PEt(3)-ligated arylamides 2a and 3a reacted with styrene to transfer the amido group to the olefin and to form the ketimine Ph(Me)C=N(p-tol) (4a) in 48-95% yields. The dinuclear amido hydride (PEt(3))(4)Rh(2)(mu-NHAr)(mu-H) (Ar = p-tolyl) (5a) was formed from reaction of 2a in 95% yield, and a mixture of this dimeric species and the (PEt(3))(n)RhH complexes with n = 3 and 4 was formed from reaction of 3a in a combined 75% yield. Propene reacted with 2a to give Me(2)C=N(p-tol) (4b) and 5a in 90 and 57% yields. Propene also reacted with 3a to give 4b and 5a in 65 and 94% yields. Analogues of 2a and 3a with varied electronic properties also reacted with styrene to form the corresponding imines, and moderately faster rates were observed for reactions of electron-rich arylamides. Kinetic studies of the reaction of 3a with styrene were most consistent with formation of the imine by migratory insertion of olefin into the rhodium-amide bond to generate an aminoalkyl intermediate that undergoes beta-hydrogen elimination to generate a rhodium hydride and an enamine that tautomerizes to the imine.     

Adsorption and dissociation of NH3 on clean and hydroxylated TiO2 rutile (110) surfaces: a computational study

The adsorption and dissociation of NH(3) on the clean and hydroxylated TiO(2) rutile (110) surfaces have been investigated by the first-principles calculations. The monodentate adsorbates such as H(3)N-Ti(a), H(2)N-Ti(a), N-Ti(a), H(2)N-O(a), HN-O(a), N-O(a) and H-O(a), as well as the bidentate adsorbate, Ti-N-Ti(a) can be formed on the clean surface. It is found that the hydroxyl group enhances the adsorption of certain adsorbates on the five-fold-coordinated Ti atoms (5c-Ti), namely H(2)N-Ti(a), HN-Ti(a), N-Ti(a) and Ti-N-Ti(a). In addition, the adsorption energy increases as the number of hydroxyl groups increases. On the contrary, the opposite effect is found for those on the two-fold-coordinated O atoms (2c-O). The enhanced adsorption of NH(x) (x = 1-2) on the 5c-Ti is due to the large electronegativity of the OH group, increasing the acidity of the Ti center. This also contributes to diminish the adsorption of NH(x) (x = 1-2) on the two-fold-coordinated O atoms (2c-O) decreasing its basicity. According to potential energy profile, the NH(3) dissociation on the TiO(2) surface is endothermic and the hydroxyl group is found to lower the energetics of H(2)N-Ti(a)+H-O(a) and HN-Ti(a)+2{H-O(a)}, but slightly raise the energetic of Ti-N-Ti(a)+3{H-O(a)} compare to those on the clean surface. However, the dissociation of NH(3) is found to occur on the hydroxylated surface with an overall endothermic by 31.8 kcal/mol and requires a barrier of 37.5 kcal/mol. A comparison of NH(3) on anatase surface has been discussed. The detailed electronic analysis is also carried out to gain insights into the interaction nature between adsorbate and surface.     

Mechanisms for NH3 decomposition on Si(100)-(2 x 1) surface: a quantum chemical cluster model study

In this paper, we present a detailed mechanism for the complete decomposition of NH3 to NHx(a) (x = 0-2). Our calculations show that the initial decomposition of NH3 to NH2(a) and H(a) is facile, with a transition-state energy 7.4 kcal mol-1 below the vacuum level. Further decomposition to N(a) or recombination-desorption to NH3(g) is hindered by a large barrier of approximately 46 kcal mol-1. There are two plausible NH2 decomposition pathways: 1) NH2(a) insertion into the surface Si-Si dimer bond, and 2) NH2(a) insertion into the Si-Si backbond. We find that pathway (1) leads to the formation of a surface Si = N unit, similar to a terminal Si = Nt pair in silicon nitride, Si3N4, while pathway (2) leads to the formation of a near-planar, subsurface Si3N unit, in analogy to a central nitrogen atom (Nc) bounded to three silicon atoms in the Si3N4 environment. Based on these results, a plausible microscopic mechanism for the nitridation of the Si(100)-(2 x 1) surface by NH3 is proposed.     

Facially coordinating triamine ligands with a cyclic backbone: some structure-stability correlations

Metal complex formation of the two cyclic triamines 6-methyl-1,4-diazepan-6-amine (MeL(a)) and all-cis-2,4,6-trimethylcyclohexane-1,3,5-triamine (Me(3)tach) was studied. The structure of the free ligands (H(x)MeL(a))(x+) and H(x)Me(3)tach(x+) (0 ≤ x ≤ 3) was investigated by pH-dependent NMR spectroscopy and X-ray diffraction experiments. The crystal structure of (H(2)Me(3)tach)(p-O(3)S-C(6)H(4)-CH(3))(2) showed a chair conformation with axial nitrogen atoms for the doubly protonated species. In contrast to a previous report, Me(3)tach was found to be a stronger base than the parent cis-cyclohexane-1,3,5-triamine (tach); pK(a)-values of H(3)Me(3)tach(3+) (25 °C, 0.1 M KCl): 5.2, 7.4, 11.2. The crystal structures of (H(3)MeL(a))(BiCl(6))·2H(2)O and (H(3)MeL(a))(ClO(4))Cl(2) exhibited two distinct twisted chair conformations of the seven membered diazepane ring. [Co(MeL(a))(2)](3+) (cis: 1(3+), trans: 2(3+)), trans-[Fe(MeL(a))(2)](3+) (3(3+)), [(MeL(a))ClCd(μ(2)-Cl)](2) (4), trans-[Cu(MeL(a))(2)](2+) (5(2+)), and [Cu(HMeL(a))Br(3)] (6) were characterized by single crystal X-ray analysis of 1(ClO(4))(3)·H(2)O, 2Br(3)·H(2)O, 3(ClO(4))(3)·0.8MeCN·0.2MeOH, 4, 5Br(2)·0.5MeOH, and 6·H(2)O. Formation constants and redox potentials of MeL(a) complexes were determined by potentiometric, spectrophotometric, and cyclovoltammetric measurements. The stability of [M(II)(MeL(a))](2+)-complexes is low. In comparison to the parent 1,4-diazepan-6-amine (L(a)), it is only slightly enhanced. In analogy to L(a), MeL(a) exhibited a pronounced tendency for forming protonated species such as [M(II)(HMeL(a))](3+) or [M(II)(MeL(a))(HMeL(a))](3+) (see 6 as an example). In contrast to MeL(a), Me(3)tach forms [M(II)L](2+) complexes (M = Cu, Zn) of very high stability, and the coordination behavior corresponds mainly to an "all-or-nothing" process. Molecular mechanics calculations showed that the low stability of L(a) and MeL(a) complexes is mainly due to a large amount of torsional strain within the pure chair conformation of the diazepane ring, required for tridentate coordination. This behavior is quite contrary to Me(3)tach and tacn (tacn =1,4,7-triazacyclononane), where the main portion of strain is already preformed in the free ligand, and the amount, generated upon complex formation, is comparably low.     

Evidence of CH2O (a3A2) and C2H4 (a3B1u) produced from photodissociation of 1,3-trimethylene oxide at 193 nm

We investigated the dissociative ionization of formaldehyde (CH(2)O) and ethene (C(2)H(4)) produced from photolysis of 1,3-trimethylene oxide at 193 nm using a molecular-beam apparatus and vacuum-ultraviolet radiation from an undulator for direct ionization. The CH(2)O (C(2)H(4)) product suffers from severe dissociative ionization to HCO(+) (C(2)H(3) (+) and C(2)H(2) (+)) even though photoionization energy is as small as 9.8 eV. Branching ratios of fragmentation of CH(2)O and C(2)H(4) following ionization are revealed as a function of kinetic energy of products using ionizing photons from 9.8 to 14.8 eV. Except several exceptions, branching ratios of daughter ions increase with increasing photon energy but decrease with increasing kinetic energy. The title reaction produces CH(2)O and C(2)H(4) mostly on electronic ground states but a few likely on triplet states; C(2)H(4) (a(3)B(1u)) seems to have a yield greater than CH(2)O (a(3)A(2)). The distinct features observed at small kinetic energies of daughter ions are attributed to dissociative ionization of photoproducts CH(2)O (a(3)A(2)) and C(2)H(4) (a(3)B(1u)). The observation of triplet products indicates that intersystem crossing occurs prior to fragmentation of 1,3-trimethylene oxide.     

Collection of iron(III) from homogeneous aqueous solutions on membrane filters using Chromazurol B with Triton X-100.

A membrane filtration method was examined concerning the effective collection of iron(III) from a homogeneous aqueous solution with Chromazurol B (CAB), one of the triphenylmethane dyes, as a precipitating reagent in the presence of a non-ionic surfactant, polyethylene glycol mono[4-(1,1,3,3-tetramethylbutyl)phenyl]ether (Triton X-100). A formed blue Fe(III)-CAB complex was collected as a precipitate on a membrane filter by filtration under suction from a homogeneous aqueous solution in the pH range over about 2. The original solution was prepared at a concentration ratio of CAB to Fe(III) of to 10, and that of Triton X-100 to CAB of 10 to 100. It was then adjusted to a pH value of between 1.0 and 6.5. A linear relationship (r = 0.999) was obtained between the initial concentration and the found one of Fe(III) in the range of 2.0 x 10(-5) to 4.0 x 10(-4) mol dm(-3) at a fixed concentration ratio of CAB to Fe(III) of 3 and that of Triton X-100 to CAB of 20. This membrane filtration with CAB and Triton X-100 may be utilized for the separation of Fe(III) as a background species.     

Lactonisation--a degradation pathway for active pharmaceutical compounds: an in silico study in amorphous trehalose

The lactonisation of a CCR1 inhibitor (CC chemokine receptor 1, involved in autoimmune diseases) featuring a hydroxyl group in a gamma-position (gamma-OH) with respect to an amide group has been investigated in silico. The two key steps of the lactonisation reaction are (i) rearrangement to an optimal conformation and (ii) the formation of the lactone (ring closure) and expulsion of NH3. Quantum chemical calculations in the gas phase were employed to identify conformers of the molecule with favorable starting geometries for a lactonisation reaction. In total, calculations of 1296 conformers revealed that it is energetically feasible for an inhibitor molecule to adopt a conformation where the carbon atom of the amide group (C(amide)) is suitably close to the oxygen atom of the gamma-OH (O(gamma)) to facilitate a successful lactonisation reaction. Additionally, molecular dynamics methods were used to show that rearrangement to a suitable conformer for lactonisation to occur happens to a lesser extent when the CCR1 inhibitor was embedded in an amorphous trehalose matrix (a model carbohydrate excipient). The mechanism of the actual lactonisation was investigated using the complete Linear Synchronous Transit/Quadratic Synchronous Transit (LST/QST) method. This was performed in both the gas phase and in water and was found to be a concerted reaction.     

Structure-Reactivity Correlations in the Dissociative Hydrolysis of 2',4'-Dinitrophenyl 4-Hydroxy-X-benzenesulfonates

The hydrolysis reactions of several title esters in water at 60 degrees C follow the rate law k(obs) = (k(a) + k(b)[OH(-)])/(1 + a(H)/K(a)), where K(a) is the ionization constant of the hydroxy group of the ester and k(b) is the second-order rate constant for the S(N)2(S) attack of hydroxide ion on the ionized ester. Hammett and Br?nsted correlations are consistent with a previous proposal that the mechanism related to k(a) is dissociative. An unusual relationship between k(a) values and redox equilibrium constants for substituted quinones is found to hold: this finding further supports the dissociative nature of the pathway related to k(a).     

Anionic Roussin's red esters (RREs) syn-/anti-[Fe(mu-SEt)(NO)2]2(-): the critical role of thiolate ligands in regulating the transformation of RREs into dinitrosyl iron complexes and the anionic RREs

The anionic syn-/ anti-[Fe(mu-SEt)(NO) 2] 2 (-) ( 2a) were synthesized and characterized by IR, UV-vis, EPR, and X-ray diffraction. The geometry of the [Fe(mu-S) 2Fe] core is rearranged in going from [{Fe(NO) 2} (9)-{Fe(NO) 2} (9)] Roussin's red ester [Fe(mu-SEt)(NO) 2] 2 ( 1a) (Fe...Fe distance of 2.7080(5) A) to the [{Fe(NO) 2} (9)-{Fe(NO) 2} (10)] complex 2a (Fe...Fe distance of 2.8413(6) A) to minimize the degree of Fe...Fe interaction to stabilize complex 2a. On the basis of X-ray absorption (Fe K- and L-edge), EPR and SQUID, complex 2a is best described as the anionic [{Fe(NO) 2} (9)-{Fe(NO) 2} (10)] Roussin's red ester with the fully delocalized mixed-valence core. The complete bridged-thiolate cleavage yielded DNIC [(EtS) 2Fe(NO) 2] (-) ( 3a) in the reaction of 2 equiv of [EtS] (-) and complex 1a, whereas reaction of 2 equiv of [(t)BuS] (-) with [Fe(micro-S (t)Bu)(NO) 2] 2 (1b) gave DNIC [((t)BuS) 2Fe(NO) 2] (-) (3b) and the anionic Roussin's red ester [Fe(mu-S (t)Bu)(NO) 2] 2 (-) (2b) through bridged-thiolate cleavage in combination with reduction. In contrast to the inertness of DNIC 3b toward complex 1b, nucleophile DNIC 3a induces the reduction of complex 1a to produce the anionic Roussin's red ester 2a. Interestingly, dissolution of complex 3a in MeOH at 298 K finally led to the formation of a mixture of complexes 2a and 3a, in contrast to the dynamic equilibrium of complexes 3b and 1b observed in dissolution of complex 3b in MeOH. These results illustrate the aspect of how the steric structures of nucleophiles ([EtS] (-) vs [ (t)BuS] (-) and [(EtS) 2Fe(NO)2](-) vs [((t)BuS) 2Fe(NO)2] (-)) function to determine the reaction products.     

Metal-assisted in situ formation of a tridentate acetylacetone ligand for complexation of fac-Re(CO)3+ for radiopharmaceutical applications

Reaction of [NEt4]2[ReBr3(CO)3] with 2,4-pentanedione (acac) yields a complex of the type fac-Re(acac)(OH2)(CO)3 (1) under aqueous conditions. 1 was further reacted with a monodentate ligand (pyridine) to yield a fac-Re(acac)(pyridine)(CO)3 complex (2). Complex 1 was found to react with primary amines to generate a Schiff base (imine) in aqueous solutions. When a mixed-nitrogen donor bidentate ligand, 2-(2-aminoethyl)pyridine, that has different coordination affinities for fac-Re(acac)(OH2)(CO)3 was utilized, a unique tridentate ligand was formed in situ utilizing a metal-assisted Schiff base formation to yield a complex fac-Re(CO)3(3[(2-phenylethyl)imino]-2-pentanone) (3). Tridentate ligand formation was found to occur only with the Re-coordinated acac ligand. Reactions of acac with fac-Re(CO)3Br(2-(2-aminoethyl)pyridine) (4) or a mixture of [NEt4]2[ReBr3(CO)3], acac, and 2-(2-aminoethyl)pyridine did not yield the formation of complex 3 in water.     

Insertion of CO2, CS2, and COS into iron(II)-hydride bonds

The reactions between cis-Fe(dmpe)2H2 (dmpe = Me2PCH2CH2PMe2) (1) or cis-Fe(PP3)H2 (PP3 = P(CH2CH2PMe2)3) (2) and carbon dioxide (CO2), carbon disulfide (CS2), and carbonyl sulfide (COS) are investigated. At 300 K, additions of CO2 (1 atm), CS2 (2 equiv), and COS (1 atm) to 1 result in the formation of a stable transformato hydride, trans-Fe(dmpe)2(OCHO)H (3a), a trans-dithioformato hydride, trans-Fe(dmpe)2(SCHS)H (4a), and a trans-thioformato hydride, trans-Fe(dmpe)2(SCHO)H (5a), respectively. When CS2 and COS are added to cis-Fe(dmpe)2H2 at 195 K, a cis-dithioformato hydride, 4b, and a cis-thioformato hydride, 5b, respectively, are observed as the initially formed products, but there is no evidence of the corresponding cis-formato hydride upon addition of CO2 to cis-Fe(dmpe)2H2. Additions of excess CO2, CS2, and COS to 1 at lower temperatures (195-240 K) result in the formation of a trans-bis(formate), trans-Fe(dmpe)2(OCHO)2 (3b), a trans-bis(dithioformate), trans-Fe(dmpe)2(SCHS)2 (4c), and a cis-bis(thioformate), cis-Fe(dmpe)2(SCHO)2 (5c), respectively. trans-Fe(dmpe)2(SCHO)2 (5d) is prepared by the addition of excess COS at 300 K. Additions of CO2 (1 atm), CS2 (0.75 equiv), and COS (1 atm) to 2 at 300 K result in the formation of a thermally stable, geometrically constrained cis-formato hydride, cis-Fe(PP3)(OCHO)H (6a), a cis-dithioformato hydride, cis-Fe(PP3)(SCHS)H (7a), and a cis-thioformato hydride, cis-Fe(PP3)(SCHO)H (8a), respectively. Additions of excess CO2 and COS to 2 yield a cis-bis(formate), cis-Fe(PP3)(OCHO)2 (6b), and a thermally stable cis-bis(thioformate), cis-Fe(PP3)(SCHO)2 (8b), respectively. All complexes are characterized by multinuclear NMR spectroscopy, with IR spectroscopy and elemental analyses confirming structures of thermally stable complexes where possible. Complexes 3b and 5a are also characterized by X-ray crystallography.     

Highly selective phosphorescent chemosensor for fluoride based on an iridium(III) complex containing arylborane units

A new phosphorescent iridium(III) complex [Ir(Bpq)2(bpy)](+)PF6(-) based on cyclometalated ligands (Bpq) containing a dimesitylboryl group was synthesized and characterized by photophysical and electrochemical studies. The excited-state properties of Bpq and [Ir(Bpq)2(bpy)](+)PF6(-) were investigated using molecular orbital calculations. Importantly, both Bpq and [Ir(Bpq)2(bpy)](+)PF6(-) could be used as highly selective chemosensors for a fluoride anion (F(-)) detected by the naked eye, owing to the interaction of the dimesitylboryl group (BMes2) with F(-). For the Bpq ligand, a red shift of the emission spectrum was observed upon the addition of F(-), which could be attributed to an excited-state switch from a pi-pi* transition to a charge-transfer transition upon complexation with F(-). The addition of F(-) to a solution of [Ir(Bpq)2(bpy)](+)PF6(-) induced a change in the solution color from yellow to orange-red and phosphorescent quenching, indicating that [Ir(Bpq)2(bpy)](+)PF6(-) could act as an excellent ON-OFF-type phosphorescent chemosensor for F(-).