A new method for the determination of mobile phase volume in normal and reversed-phase liquid chromatography

Summary A new method for the determination of the mobile phase volume (V _m) in liquid chromatography is presented based on the model regarding the retention of ionic solutes in the presence of eluent electrolytes. TheV _m value can be determined by measuring the retention volumes of two ions that have the same charge in two eluent electrolyte systems. Compared with the methods using isotopically labelled eluent components or inorganic salts asV _m markers, the method presented is proved to give more reasonableV _m values for both normal and reversed-phase liquid chromatography. As well as in binary mixed solvent systems, theV _m values in single solvent systems can be determined by this method.     

Separation of styrene-methacrylate copolymers by composition using normal and reversed-phase high-performance liquid chromatography

The separation of styrene-methacrylate copolymers by chemical composition was studied using high-performance liquid chromatography (HPLC). With the combination of acrylonitrile (polar) gel and nonpolar eluent or of styrene (nonpolar) gel and polar eluent, poly(styrene-co-methylmethacrylate) was separated by the adsorption mechanism. The former is designated as normal and the latter as reversed phase. With other combinations, the copolymer was separated mainly by fractional dissolution mechanism. The sample eluted slightly earlier as molecular weight decreased. The molecular weight effect on the reversed-phase HPLC was smaller than that on the normal phase. A gel with an exclusion limit of 3 × 10³ exhibited greater molecular weight dependence and worse resolution than a gel with an exclusion limit of 50 × 10⁴. Poly(styrene-co-n-butyl methacrylate) also was separated on the basis of chemical composition by normal and reverse-phase HPLC. However, poly(styrene-co-t-butyl methacrylate) was separated only by reverse-phase HPLC. When octadecyl methacrylate gel was used instead of styrene gel in reverse-phase HPLC, a good separation was not obtained. This indicates a specific interaction between the phenyl group of the styrene gel and the sample.     

Retention behavior of dipeptide isomers in reversed-phase high-performance liquid chromatography

Summary The effects of eluent pH and organic modifier concentration on the capacity factor (k) and selectivity of dipeptide isomers were investigated. It has been observed that the variation in the logarithm of the capacity factor of the dipeptide isomers is linearly dependent on the organic modifier concentration (C_b), however, the selectivity is almost independent of it. Both capacity factor and selectivity were seriously affected by the pH of the eluent. Both the capacity factor and the intercept of the ln k vs. C_b plot increased with increasing van der Waals volume of the non-polar amino acid subunit of the dipeptides.     

Determination of phenyltin compounds by reversed-phase liquid chromatography

An analytical procedure for the determination of phenyltin compounds in environmental sample waters was studied. Chromatography of mono-, di- tri-phenyltin (MPT, DPT and TPT) was performed on a reversed-phase C₁₈ column with the mobile phase comprising methanol/10⁻² M H₃PO₄ (80:20 v/v) at pH 3 and UV detection at 214 nm. To enhance the sensitivity of the detection system, the post-column reaction between morin or 3-hydroxyflavone and phenyltin compounds was formed before fluorescence detection. Several parameters affecting the fluorescence intensity were studied systematically, including the optimum condition for the post-column reagent that was also compatible with the eluent. The parameters concerned in this study were the pH, the percentage of Triton X-100, the ratio of fluorigenic reagent to phenyltin compounds and the amount of methanol in the eluent. Detection limits before the preconcentration process were in the region of 1.5 ppb for TPT and 150–250 ppb for MPT and DPT, respectively. Utilizing solid-phase extraction on a C₁₈ cartridge for sample clean-up as well as preconcentration successfully reduced the detection limit of TPT to the level of ng dm⁻³ and can be applied to seawater analysis. Recovery in the range 95.0–98.0% was obtained by developing the optimum elution profile in the preconcentration step. © 1998 John Wiley & Sons, Ltd.     

Analyses of tetracyline antibiotics by reversed-phase high-performance liquid chromatography

Summary A high-performance liquid chromatographic (HPLC) separation was developed that is generally applicable to nine commercially important tetracyline antibiotics. The general method uses an isocratic system and mobile phase consisting of 0.001MEDTA, pH 6.6, and methanol and a Vydac C₁₈ reversed-phase column. Quantitation of the particular tetracyline in some commercial preparations is accomplished by adjusting the mobile phase composition. Quantitative assays were developed for small amounts of 4-epitetracycline in tetracycline (TC) preparations, demeclocycline in minocycline preparations and TC in chlortetracycline (chlor-TC) preparations. A fast HPLC assay for potency was also developed for chlor-TC and minocycline in these commercial preparations.     

Retention behaviour of an homologous series of oligodeoxythymidilic acids using reversed-phase ion-pair chromatography

Summary The retention behaviour of an homologous series of phosphorylated oligodeoxythymidylic acid (pd(T)_5–18) oligonucleotides was studied using reversed-phase ion-pair chromatography with isocratic elution conditions. The effects of temperature, pH, eluent ionic strength, percentage organic modifier, concentration and alkyl chain length of the ion-pairing reagent were investigated. The retention behaviour was generally explicable by current theoretical models of ion-pair chromatography. However, the marked effect of mobile phase pH on the retention of the oligonucleotides was unexpected, and this was ascribed to the presence of ionisable residual silanols on the surface of the reversed-phase packing material.     

Study of pH dependence using molecular modeling in reversed-phase liquid chromatography of 1-phenyl-3-methyl-5-pyrazolone derivatives of aldose

A series of 1-phenyl-3-methyl-5-pyrazolone (PMP) aldose was eluted on a C₁₈ column with an acetonitrile-phosphate buffer over the range of pH 2-10 in reversed phase liquid chromatography. The relationship between the retention factor, k, and the eluent pH was expressed by an equilibrium scheme representing the probable retention process. The experimental data were fitted to the correlation curve drawn according to the equation containing the formation of the hydrogen bond with a hydroxonium ion in the eluent and the ionization of the oxygen atoms in the pyrazolone rings of the solute.The conformational changes of PMP-aldose according with the eluent pH were corroborated by computer-aided molecular modeling using quantum chemical calculations. The retention behavior was elucidated as a function of the geometrical feature of the PMP-aldose.     

On-column endcapping and derivatization in reversed-phase high-performance liquid chromatography

Summary On-column endcapping and derivatization or regeneration of C₈ and C₁₈ reversed-phase HPLC columns with newly introduced reagents were studied. These treatments can increase column life expectancy by restoring retention times and original chromatographic characteristics of the columns. This is illustrated by examples. Presented at the 15th International Symposium on Chromatography, Nürnberg, October 1984     

Buffered superheated water as an eluent for reversed-phase high performance liquid chromatography

Summary Inorganic buffers have been used to control the pH of a superheated water eluent for reversed-phase liquid chromatography. Using a temperature gradient from 70–190 °C, the relative order of elution of a series of sulfonamides on a polystyrene-divinyl benzene column was determined at pH 3, 7 and 11. The separations were compared with conventional reversed-phase separations on polymer and ODS-bonded silica columns. The apparent pK _a values of selected sulfonamides at elevated temperatures were determined from their retention factors across in a range of superheated buffers and the values were compared to those reported at room temperature.     

Influence of the eluent composition on column efficiency in reversed-phase high-performance liquid chromatography

Summary The dependence of column efficiency on the eluent (MeOH/H₂O) composition in a reversed-phase liquid chromatography system within a wide concentration range has been systematically examined. It is shown that when the intracolumn effect of mass transfer and diffusion is the main factor controlling band broadening the column efficiency decreases with the increase of the viscosity of the MeOH/H₂O mixture; on the other hand, when the extra-column effect is the main factor an increase in the viscosity of the eluents will help in improving column efficiency. The column efficiency is also related to the properties of the sample.     

A refined physico-chemical model of solute retention in reversed-phase high-performance liquid chromatography with ternary mobile phases

Summary In our previous publication we have introduced a new model of solute retention in RP-HPLC systems with ternary mobile phases of the B+AB₁+AB₂ type (B: acetonitrile or tetrahydrofuran; AB₁: methanol; AB₂: water). That model proposed no stoichiometric differentiation between acetonitrile and tetrahydrofuran, alternatively present in the solvent system; moreover, it made some very rough assumptions only as to the intermolecular interactions among the mobile phase constituents.This paper introduces a significant refinement to the already established retention model, which is based on the simple quantitative relationships between acetonitrile and tetrahydrofuran, and the remaining components of the ternary liquid system. The refined model is tested with same experimental data.     

Ion-pair reversed-phase high-performance liquid chromatography for trace metal preconcentration followed by ion-interaction chromatography

Ion-interaction chromatography of Plasmocorinth B (a disulphonated azo dye) complexes of Co(III), Cu(II), Fe(III), Ga(III), In(III), Ni(II), V(V) and Zr(IV) was studied. The behaviour of two different reversed-phase C₁₈ columns (5 and 10 μm) was compared and an on-line enrichment procedure was developed following the optimization of eluent (pH, ligand concentration, ionic strength and organic modifier). The described technique, applied to the analysis of metal ions at μg/1 levels in natural waters, gave satisfactory precision and accuracy in comparison with inductively coupled plasma atomic emission spectroscopic results.     

Chromatographic behaviour of low molar-mass polyesters in normal-phase high-performance liquid chromatography

Summary The normal-phase chromatographic retention behaviour of polyesters on bare silica and on a polymer-based polyamine (PA) column has been studied with a variely of binary mobile phases under isocratic conditions. The dependence of experimental retention data on the degree of polymerization (p) and on mobile phase composition (φ) was characterized by to an approach developed by Jandera et al. The bulky repeating unit and the relatively highly polar end groups of the polyesters both had a large influence on retention behaviour. The two effects in combination explain the molar-mass-independent retention observed experimentally at a particular mobile phase composition for all the mobile phase—stationary phase combinations investigated. These conditions were found to be independent of the type of end group. End group separation on a silica column improves when the polarity of the less polar solvent is increased. End group separation is better on the PA column because of a greater difference between the adsorption energy of the alcohol and acid end groups. Better prediction of retention data on the PA column was achieved by use of an approach which assumes two different types of adsorption site. Results enabled further understanding of retention behaviour in normalphase gradient polymer-elution chromatography (NPGPEC) and explained both the dependence of the order of elution onp and differences between the end-group selectivity of different systems.     

Monitoring of the synthesis ofcis andtrans ruthenium macrocyclic complexes by reversed-phase high-performance liquid chromatography

Summary The synthesis of the complex [Ru(cyclam)Cl₂]Cl (cyclam=1,4,8,11-tetraazacyclotetradecane) has been monitored by reversed-phase high-performance liquid chromatography. The analytical results obtained during the reaction have shown that it is feasible to identify and isolate the two isomerscis- andtrans- [Ru(cyclam)-Cl₂]Cl. The use of an octadecylsiloxy preparative column enabled the separation and purification of these two isomers and the compounds have been obtained in high purity. The use of reversed-phase high-performance liquid chromatography has afforded complete analytical control of the syntheses of saturated nitrogendonor macrocyclic complexes of ruthenium, enabling identification of thecis andtrans isomers of the complex [Ru(cyclam)Cl₂]Cl.     

Monitoring of the synthesis ofcis andtrans ruthenium macrocyclic complexes by reversed-phase high-performance liquid chromatography

Summary The synthesis of the complex [Ru(cyclam)Cl₂]Cl (cyclam=1,4,8,11-tetraazacyclotetradecane) has been monitored by reversed-phase high-performance liquid chromatography. The analytical results obtained during the reaction have shown that it is feasible to identify and isolate the two isomerscis- andtrans- [Ru(cyclam)Cl₂]Cl. The use of an octadecylsiloxy preparative column enabled the separation and purification of these two isomers and the compounds have been obtained in high purity. The use of reversed-phase high-performance liquid chromatography has afforded complete analytical control of the syntheses of saturated nitrogendonor macrocyclic complexes of ruthenium, enabling identification of thecis andtrans isomers of the complex [Ru(cyclam)Cl₂]Cl.