Effect of FeO x on the electrocatalytic properties of NiCo2O4 for O2 evolution from alkaline solutions

Mixtures of NiCo₂O₄ and FeO _x were obtained by thermal decomposition of the nitrates of Ni, Co, and Fe in appropriate proportions. Two series of electrodes were prepared: (1) at constant composition (20 mol% FeO _x ) and various calcination temperatures in the range 200 to 480 °C and (2) at constant calcination temperature (300 °C) and various compositions in the whole composition range 0 to 100 mol% FeO _x . The oxide layers were characterized by thermogravimetric analysis, X-ray diffraction, scanning electron microscopy, and cyclic voltammetry. Experimental data showed that the layers consist of a mixture of phases in which Fe oxide is present as Fe₂O₃. The electrocatalytic properties were assessed by means of quasi-stationary potentiostatic current-potential curves for the O₂ evolution reaction from alkaline solution. Results have shown that the mechanism of O₂ evolution depends on composition moderately. The electrocatalytic activity appears to depend on composition only slightly. Dedicated to Professor Oleg Petrii on the occasion of his 70th birthday on August 24th, 2007.     

MgF2 Xerogels

MgF₂ protective and antireflective coatings have been conventionally produced by sputtering or chemical vapour deposition CVD [1, 2], but here sol-gel routes to MgF₂ are explored. MgF_2(M) and MgF_2(E) were prepared using an alkoxide:HF:ROH mole ratio of 1:2:200 with methanol and ethanol respectively. All sols were stable for over a year. X-ray diffraction confirmed the presence of MgF₂ in samples (but also traces of MgO), and X-ray photoelectron spectroscopy suggested some F deficiency in the surface. Nevertheless, the MgF₂ xerogels had surface areas and porosities that were very high and this may be used to advantage in coatings or sensors.     

Sol-gel coatings of BaO-TiO2-SiO2 compositions

New alkali resistant BaO-TiO₂-SiO₂ coatings have been developed via the sol-gel process. In the solutions and in the gels (T<300°C) an infrared absorption band at 930 cm^–1 gives the possible evidence of mixed Si-O-Ti bonds, which have not been found in the system SiO₂-TiO₂-ZrO₂. Baking the films at about 500°C for less than 1 h leads to stable layers with negligible residual carbon contents. Compositions near 20 BaO-40 TiO₂-40 SiO₂ showed the best performance.     

Investigation of Solid-Solid Interactions between Pure and Li2O-Doped Magnesium and Ferric Oxides

The results obtained showed that the addition of small amounts of LiNO₃ to the reacting mixed solids, consisting of equimolar proportion of Fe₂O₃ and basic MgCO₃ much enhanced the thermal decomposition of magnesium carbonate. The addition of 12 mol% LiNO₃ (6 mol% Li₂O) decreased the decomposition temperature of MgCO₃ from 525.5 to362°C. MgO underwent solid–solid interaction with Fe2O3 at temperatures starting from800°C yielding MgFe₂O₄. The amount of ferrite produced increased by increasing the precalcination temperature of the mixed solids. However, the completion of this reaction required prolonged heating at elevated temperature above 1100°C. Doping with Li₂O much enhanced the solid–solid interaction between the mixed oxides leading to the formation of MgFe₂O₄ phase at temperatures starting from 700°C. The addition of 6 mol% Li₂O to the mixed solids followed by precalcination at 1050°C for 4 h resulted in complete conversion of the reacting oxides into magnesium ferrite. The heat treatment of pure and doped solids at 900–1050°C effected the disappearance of most of IR transmission bands of the free oxides with subsequent appearance of new bands characteristic for MgFe₂O₄ structure. The promotion effect of Li2O towards the ferrite formation was attributed to an effective increase in the mobility of the various reacting cations. The activation energy of formation (ΔE) of magnesium ferrite was determined for pure and variously doped solids and the values obtained were 203, 126, 95 and 61 kJ mol⁻¹ for pure mixed solids and those treated with 1.5, 3.0 and 6.0 mol% Li₂O, respectively. This revised version was published online in August 2006 with corrections to the Cover Date.     

Formation and Crystallization Behavior of Gels in the Na2O-SiO2-TiO2-ZrO2 System

SiO₂-TiO₂-ZrO₂ and 5Na₂O·95(SiO₂ + TiO₂ + ZrO₂) gels were synthesized and role of Na₂O in gel formation and crystallization behavior of gels were studied. From Si(OC₂H₅)₄, Ti(iso-OC₃H₇)₄, Zr(n-OC₃H₇)₄ and NaOCH₃ solutions in EtOH without H₂O, transparent and opaque gels were obtained. Opaque bulk gels, rich in TiO₂ or ZrO₂ composition in Na₂O containing SiO₂-TiO₂-ZrO₂ system, contain agglomerated spherical particles of diameter small <10 m, in contrast with opaque gels having large particles <30 m in alkali-free SiO₂-TiO₂-ZrO₂ system. Crystallization temperature (Tc) was measured by DTA on dried gels. Compared with the alkali-free SiO₂-TiO₂-ZrO₂ gels, 5 mol% Na₂O containing gels gave lower Tc in SiO₂ rich compositions and higher in TiO₂ rich or ZrO₂ rich compositions.     

Solid-solid interactions in pure and Li2O-doped manganese and magnesium mixed oxides system

The solid-solid interactions between manganese and magnesium oxides in absence and in presence of small amounts of Li₂O have been investigated. The molar ratios between manganese and magnesium oxides in the form of Mn₂O₃ and MgO were varied between 0.05:1 to 0.5:1. The mixed solids were calcined in air at 400-1000°C. The techniques employed were DTA, XRD and H₂O₂ decomposition at 20-40°C.The results obtained revealed that solid-solid interactions took place between the reacting solids at 600-1000°C yielding magnesium manganates (Mg₂MnO₄, Mg₆MnO₈, MgMnO₄ besides unreacted portions of MgO, Mn₂O₃ and Mn₃O₄). Li₂O-doping (0.75-6 mol%) of the investigated system followed by calcination at 600 and 800°C decreased progressively the intensity of the diffraction lines of Mn₂O₃ (Bixbyite) with subsequent increase in the lattice parameter 'a' of MgO to an extent proportional to the amount of Li₂O added. This finding might suggest that the doping process enhanced the dissolution of Mn₂O₃ in MgO forming solid solution. This treatment led also to the formation of Li₂MnO₃. Furthermore, the doping with 3 and 6 mol% Li₂O conducted at 800°C resulted in the conversion of Mn₂O₃ into Mn₃O₄, a process that took place at 1000°C in absence of Li₂O. The produced Li₂MnO₃ phase remained stable by heating at up to 1000°C. Furthermore, Li₂O doping of the investigated system at 400-1000°C resulted in a progressive measurable increase in the particle size of MgO.The catalytic activity measurements showed that the increase in the molar ratio of Mn₂O₃ in the samples precalcined at 400-800°C was accompanied by a significant increase in the catalytic activity of the treated solids. The maximum increase in the catalytic activity expressed as reaction rate constant measured at 20°C (k _20°C) attained 3.14, 2.67 and 3.25-fold for the solids precalcined at 400, 600 and 800°C, respectively. Li₂O-doping of the samples having the formula 0.1 Mn₂O₃/MgO conducted at 400-600°C brought a progressive significant increase in its catalytic activity. The maximum increase in the value of k _20°C due to Li₂O attained 1.93 and 2.75-fold for the samples preheated at 400 and 600°C, respectively and opposite effect was found for the doped samples preheated at 800°C.This revised version was published online in November 2005 with corrections to the Cover Date.     

Kinetic study of zirconia crystallization from amorphous ZrO2-SiO2 composite precursors processed by sol-gel chemistry

Powder precursor gels with composition xZrO₂·(100–x)SiO₂, with selected values of x=8, 24, 43 and 75 mol%, were processed by sol-gel chemistry. Differential thermal analysis (DTA) was used to study crystallization in (cubic/tetragonal)-ZrO₂ during the heating of the reactive amorphous precursors. Kinetic parameters such as activation energy, Avrami's exponent and frequency factor have been simultaneously calculated from the computed DTA data using a previously reported kinetic model. The crystallization temperature decreases relative to the increase in the amount of ZrO₂, the value of the kinetic parameter of the crystallization being related to the value of x.     

Electrochemical behaviour of SiO2 sol-gel coatings on stainless steel

SiO₂ coatings onto stainless steel substrates have been prepared by sol-gel in order to study the performance and mechanism of attack in different corrosive solutions. The electrochemical behaviour of the samples has been evaluated by Electrochemical Impedance Spectroscopy using NaCl and HCl as electrolytes. Comparative tests have been performed on samples with one and two silica layers as well as on uncoated ones. SiO₂ coatings produce no important protection of stainless steels subjected to electrochemical corrosion. This behaviour may be explained by micropores and microcracks produced during the coating sintering.     

Structure of TiO2 in TiO2-SiO2 prepared by a complexing agent-assisted sol-gel procedure

Many types of TiO₂-SiO₂ (Ti:Si=50:50 mol%) were prepared by the sol-gel procedure with and without 2-methyl-2, 4-pentanediol (MPD) as an organic ligand. The effect of MPD on the gel structure and the properties of the TiO₂ crystals were studied by XRD and raman spectroscopy, and the effect of the sol standing time on the properties of the TiO₂ crystals were also studied by XRD spectroscopy. In the gels with MPD, anatase of TiO₂ appeared at approximately 580°C, and the crystal structures were similar despite the difference in the gel preparation procedure. The titania gels with MPD were presumed to be dispersed in the silica gel matrix without any Ti-O-Si bond. In the presence of MPD, the formation of titania gels is controlled and the specified TiO₂ crystal is produced.     

Mesoporous-TiO2 nanoparticles based carbon paste electrodes exhibit enhanced electrochemical sensitivity for phenols

Mesoporous-TiO₂ nanoparticles (meso-TiO₂) and nano-TiO₂ particles (nano-TiO₂) were synthesized and characterized using scanning electron microscopy. The electrochemical behaviours of carbon paste electrodes (CPE), nano-TiO₂/CPE and meso-TiO₂/CPE were investigated using K₃[Fe(CN)₆] as the electrochemical probe. It was observed that the peak potential separation was remarkably decreased at the meso-TiO₂/CPE with higher peak currents in comparison with the other two CPEs. Moreover, the electrochemical performance towards phenol and p-substituted phenol detection was studied with remarkably enhanced oxidation signals at meso-TiO₂/CPE. The meso-TiO₂ shows considerable surface enhancement effects towards phenols which increase linearly with Hammett’s constants. Additionally at higher NaCl concentrations, the oxidation peak currents of phenols notably increases at meso-TiO₂/CPE, while remaining unchanged at CPE and nano-TiO₂/CPE. In summary meso-TiO₂ nanoparticles are superior electrode materials for electrocatalysis.     

Preparation and characterization of mesoporous TiO2-CeO2 nanopowders respond to visible wavelength

Mesoporous TiO₂-CeO₂ nanopowders responding to visible wavelength were synthesized by using a surfactant assisted sol-gel technique. They were obtained using metal alkoxide precursors modified with acetylacetone (ACA) and laurylamine hydrochloride (LAHC) as surfactant. The samples were characterized by XRD, nitrogen adsorption isotherm, SEM, TEM, and selected area electron diffraction (SAED), respectively. The 95 mol% TiO₂-5 mol% CeO₂ system yielded single anatase phase, however, further addition of the CeO₂ formed cubic CeO₂ structure while anatase TiO₂ decreased. Additions of 5 and 10 mol% CeO₂ increased the surface area, but those of 25, 50, and 75 mol% CeO₂ did not affect it very much. By using this mixed metal oxides system, TiO₂ can be modified to respond to the visible wavelength. The mixed metal oxides had catalytic activity (evaluating the formation rate of I₃⁻) about 2-3 times higher than pure CeO₂, while nanosize anatase type TiO₂ materials had no catalytic activity under visible light. The catalytic activity was almost proportional to the specific surface area. The formation rate of I₃⁻ was much improved by changing the calcination temperature and calcination period. Highest catalytic activity in this study was obtained for the 50 mol% TiO₂-50 mol% CeO₂ nanopowders calcined at 250 °C for 24 h.     

Devitrification Behavior of Calcium Phosphate Glasses Containing Al2O3 and SiO2 Additives

The effects of Al₂O₃ and SiO₂ additives on the crystallization of calcium phosphate glasses were studied. When the Al₂O₃ content was higher than 7 mol%, surface devitrification occurred in the glasses. However, for glasses with Al₂O₃ contents higher than 10 mol%, bulk devitrification predominanted. For the glasses with SiO₂, a surface devitrification mechanism predominanted. Non-isothermal DTA techniques were applied in order to establish the devitrification mechanism, and the kinetic parameters of crystal growth were obtained. The parameter m depends on the mechanism and morphology of devitrification of calcium phosphate, glass containing SiO₂ as additive, the values of m being lower than 1.2. These results indicate that the devitrification is controlled by the reaction at the glass-crystal interface, or occurs from surface nuclei. This revised version was published online in July 2006 with corrections to the Cover Date.     

Thermodynamic properties of transition metals in aqueous solution:4. The enthalpies of mixing aqueous solutions of CdCl2, CuCl2 and ZnCl2 with MgCl2 at varying ionic strength at 25°C

Enthalpies of mixing ΔH _m of aqueous solutions of CdCl₂, CuCl₂, and ZnCl₂ with MgCl₂ solutions were measured at ionic strengths of 1.0, 2.0, and 3.0 at 25°C. The excess enthalpy equations of Pitzer were then fitted to the resulting ΔH _m data. The resulting parameters are the temperature derivatives of the activity coefficient mixing parameters in the Pitzer system.     

Effect of sodium oxide doping on solid-solid interactions between V2O5 AND Al2O3

A V₂O₅/Al₂O₃ mixed solids sample was prepared with a molar ratio of 0.41 Na₂O (4 and 10 mol%) was added in the form of sodium nitrate prior to calcination in air in the temperature range 500–1000C. Solid-solid interactions between V₂O₅ and Al₂O₃ were studied using DTA and TG curves and their derivatives together with XRD techniques.The results obtained showed that Na₂O interacted with V₂O₅ at temperatures starting from 500C to yield a sodium/vanadium compound, Na_0.3V₂O₅ which remained stable and decomposed in part by heating at 1000C. V₂O₅ exists in orthorhombic and monoclinic forms in the case of pure mixed solids and those containing 4 mol% of Na₂O and preheated at 500C, and in monoclinic form in the case of the mixed solid doped with 10 mol% of Na₂O.Heating of pure and doped mixed oxide solids at 650C resulted in the conversion of most of the V₂O₅ into AlVO₄. Doping with sodium oxide enhanced the solid-solid interaction between V₂O₅ and Al₂O₃ at 650C to produce AlVO₄. The produced AlVO₄ decomposed completely on heating at 700C to form -Al₂O₃ and V₂O₅, (orthorhombic and monoclinic forms).The presence of Na₂O was found to decrease the relative intensity of the diffraction lines of -Al₂O₃ (corundum) produced at 750C which indicated some kind of hindrance of the crystallization process.Heating of pure and doped mixed solids at 1000C resulted in a further crystallization of acorundum together with V₂O₅ and sodium vanadate, Na_0.3V₂O₅. However, the intensities of diffraction lines relative to those of the sodium vanadium compound were found to decrease markedly by heating at 1000C, indicating partial thermal decomposition into vanadium and aluminium oxides.     

Photoelectrochemical Properties of Sol-Gel Nb2O5 Films

Structural, optical, electro and photoelectrochemical properties of amorphous and crystalline sol-gel Nb₂O₅ coatings have been determined. The coatings are n-type semiconductor with indirect allowed transition and present an overall low quantum efficiency ( < 4%) for UV light to electric conversion. The photoconducting behavior of the coatings is discussed within the framework of the Gärtner and Södergren models. Improvement can be foreseen if Nb₂O₅ coatings can be made of 10–20 nm size nanoparticles.     

Adsorption behavior of polymers having phosphoric acid group on γ-Fe2O3 and magnetic characteristics in magnetic coatings

Polymers having phosphoric acid groups were prepared as a model binder for magnetic coatings, and the correlation among the adsorption behavior of the polymers onto-Fe₂O₃ particles and the dispersibility, the orientation, and the packing density of-Fe₂O₃ particles in the magnetic coatings was investigated.PMMA homopolymer molecules hardly adsorbed on-Fe₂O₃, and the interfacial tension at a water/polymer solution (toluene) interface ( _W/T) was scarcely changed compared with a water/toluene interface. Increasing with the content of polymeric phosphoric acid group, the adsorbance of polymer increased and the interfacial tension ( _W/T) decreased. When the content of polymeric phosphoric acid groups was over 0.4 mol%, the adsorbance of polymer and interfacial tension ( _W/T ) remained constant. When these polymers were used as a binder for magnetic tapes, the dispersibility of-Fe₂O₃ in the magnetic coatings was improved, increasing with the content of polymeric phosphoric acid group; however, when the content of phosphoric acid group was over 0.2 mol%, its dispersibility decreased abruptly.Studies on Recording Magnetic Materials and Magnetic Composite. XVIII.     

Preparation of thin SnO2 layers by inorganic sol-gel process

SnO₂ sols were prepared in the following way: (1) precipitation of metastannic acid with aqueous ammonia from aqueous solutions of SnCl₄, (2) washing the precipitates with NH₄NO₃ solution and water, (3) peptization of precipitates in water, sometimes with an addition of HNO₃, at elevated temperature using mechanical stirring. In those sols, sometimes diluted with water or ethanol, substrates (glass or silica derived wafers) were dipped and withdrawn at various rates. Gel coatings were converted into crystalline SnO₂ by thermal treatment at 600°C. Coatings with thickness between 300–2000 Å were prepared.     

Effects of aging time on V2O5 sol-gel coatings

Vanadium pentoxide (V₂O₅) sols have been used in conductive coatings and related applications [1, 2, 3]; however, the changes which may occur in the properties of these coatings with sols of different ages have not been carefully shown. Properties which may be dependent on the age of the sol (sol viscosity, film morphology and conductance) were measured in this work. The coating sols were prepared by ion-exchange of sodium metavanadate solutions.It was found that the coating thickness, sol viscosity, and surface morphology of the coatings were directly related to the age of the sol used. The dried coating thickness increased from 3 microns to 20 microns over a 30 day period. The sol viscosity increased from 1 centipoise to near 2 centipoise. The surface morphology of the coatings changed from that of a featureless surface at day 1 to a continual coverage of micron-sized fibers as the coating sols aged. The conductivity of the coatings, though, was unaffected by the age of the sol. The coating properties were correlated to the amount of polymerization of dissolved precursors in solution.     

Superconducting coatings of MgB2 prepared by electrophoretic deposition

The electrophoretic deposition technique was applied for the production of MgB₂ superconducting coatings on various substrates, by using a suspension of MgB₂ superconducting powder in an organic solvent. The main parameters that affect the deposition rate of the process and the quality of the coatings produced, such as the initial concentration of the suspension, the applied voltage and the distance between the electrodes, were investigated and optimized. The coatings produced were characterized and investigated for possible interaction between the substrate and the deposited superconductor by X-ray diffraction. The superconducting properties were measured by magnetic susceptibility (superconducting quantum interference device).     

Investigation of RuO2-IrO2-SnO2 thin film evolution

The thermal evolution process of RuO₂–IrO₂–SnO₂ mixed oxide thin films of varying noble metal contents has been investigated under in situ conditions by thermogravimetry-mass spectrometry (TG-MS), infrared emission spectroscopy (IR) and cyclic voltammetry (CV). The gel-like films prepared from aqueous solutions of the precursor compounds RuOHCl₃, H₂IrCl₆ and Sn(OH)₂(CH₃COO)_2–xCl_x on titanium metal support were heated in an atmosphere containing 20% O₂ and 80% Ar up to 600°C. Chlorine evolution takes place in a single step between 320 and 500°C accompanied with the decomposition of the acetate ligand. The decomposition of surface species formed like carbonyls, carboxylates and carbonates occurs in two stages between 200 and 500°C. The temperature of chlorine evolution and that of the final film formation increases with the increase of the iridium content in the films. The anodic peak charge shows a maximum value at 18% iridium content.