Synthesis of a (β-acetamido-α-acetoxyethyl)boronic ester via azido boronic esters

(Azidomethyl)boronic esters of 1,2-dicyclohexyl-1,2-ethanediol (“DICHED”) and pinanediol have been prepared from the corresponding (bromomethyl)boronic esters. Conversion to (2-azido-1-chloro- or bromoethyl)boronic esters by reaction with a (dihalomethyl)lithium followed. Attempted displacement of halide from DICHED (2-azido-1-haloethyl)boronates with alkoxides failed. Reaction of either pinanediol or DICHED (2-azido-1-chloromethyl)boronate with sodium acetate in acetic acid yielded the 1-acetoxy derivative as a ∼1:1 mixture of diastereomers, indicating probable involvement of an α-boryl carbocation intermediate. Hydrogenation of the pinanediol azido boronic ester over platinum in a solution of hydrogen chloride in dioxane was accompanied by deacetylation to form the impure (2-amino-1-hydroxyethyl)boronic ester hydrochloride. Attempted purification of this material resulted in deboronation to ethanolamine. Acetylation yielded pinanediol (2-acetamido-1-acetoxyethyl)boronate.     

An electrophilic cleavage procedure for the asymmetric dihydroxylation: direct enantioselective synthesis of cyclic boronic esters from olefins

A variation within the osmium-catalysed asymmetric dihydroxylation (AD) of olefins is described that yields cyclic boronic esters from olefins in a straight-forward manner. This process represents the first real product alteration in asymmetric dihydroxylation, since all previous protocols lead to free diols exclusively. A protocol based on the Sharpless AD conditions (for enantioselective oxidation of prochiral olefins) was developed that gives cyclic boronic esters with excellent enantiomeric excesses (ee's). Some of the ee's are higher than those reported for conventional AD. The unprecedented role of phenyl boronic acid on the course of the AD reaction was investigated in detail. PhB(OH)2 does not interfere with the chiral ligand, leaving the enantioselective step of olefin oxidation intact. The main role of the boronic acids-apart from protecting the diol products against potential overoxidation-relies on removing the diol entity in an electrophilic cleavage, which is in contrast to the conventional hydrolytic cleavage of the AD protocols. Thus, a mechanistically new cleavage for enantioselective dihydroxylation reactions is introduced within the present work.     

Cyclization of peptoids by formation of boronate esters

Introduction of conformational constraints into peptoids (N-substituted oligoglycines) will enable new applications in molecular recognition and self-assembly. Peptoids that contain both a phenylboronic acid side chain and a vicinal diol cyclize by intramolecular condensation to form boronate esters. A fluorescent indicator of free boronic acid was used to assay esterification. A galactose moiety 2 to 5 monomer units away from a boronic acid side chain in a peptoid reacts with the boronic acid in competition with the indicator. The intramolecular reaction predominates in each case, with 80-90% of the peptoid cyclized. When the diol is a simple 2,3-dihydroxypropyl group, esterification is less favored but still appreciable.     

Stability of boronic esters - Structural effects on the relative rates of transesterification of 2-(phenyl)-1,3,2-dioxaborolane

Relative rates of reaction of the achiral cyclic phenylboronic ester 2-(phenyl)-1,3,2-dioxaborolane with a wide variety of structurally modified diols, have been studied to understand the factors influencing the relative stabilities of boronic esters. It is found that the alkyl substituents on the α-carbons of diols slow down the transesterification, but produce thermodynamically more stable boronic ester. Six-membered boronic esters are thermodynamically more stable than their corresponding five-membered analogs. Amongst cyclic 1,2-diols, cis-1,2-cyclopentanediol displaces ethylene glycol instantaneously whereas trans-1,2-cyclopentanediol is totally unreactive, which suggests that the cis-stereochemistry of the 1,2-diol is a prerequisite for transesterification. Among the 1,5-diols, diethanolamine displaces ethylene glycol quite rapidly forming a more stable bicyclic chelate in which nitrogen is attached to boron by a coordinating bond (as evident by ¹¹B NMR spectroscopy). The oxygen atom of di(ethylene glycol) and the sulfur atom of 2,2′-thiodiethanol do not assist in displacing the ethylene glycol from their boronic esters.     

Poly(glyceryl glycerol): A multi‐functional hydrophilic polymer for labeling with boronic acids

The synthesis of poly(glyceryl glycerol) (PGG), a polymer featuring a polyethylene oxide backbone and 1,2‐diol groups in every repeating unit, is presented. PGG was prepared by monomer‐activated ring‐opening polymerization of (dl ?1,2‐isopropylidene glyceryl) glycidyl ether, introducing a functional azido‐ or bromo‐head group to each chain. The 1,2‐diol groups, which were released by acidic deprotection, readily reacted with boronic acid derivatives, enabling the attachment of functional moieties under mild aqueous conditions. PGG was conjugated to poly(l ‐lactide) (PLLA) via azide‐alkyne cycloaddition and the resulting copolymer assembled into nanoparticles of 70 nm diameter in aqueous solution. Labeling of the PGG–PLLA particles was achieved by simple mixing with a boronic acid‐functional fluorophore. The labeling efficiency was determined by fluorescence spectroscopy to be 85.5% for boronic acid‐functional rhodamine B compared with 0.2% for plain rhodamine B. The strong interaction of PGG with boronic acids is ascribed to its polyol structure. This study demonstrates the usefulness and versatility of PGG as a hydrophilic polymer for possible biomedical applications. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1822–1830     

Synthesis of enantioenriched tertiary boronic esters from secondary allylic carbamates. Application to the synthesis of C30 botryococcene

Enantioenriched secondary allylic carbamates have been deprotonated with sBuLi and reacted with boronic esters. In contrast to other electrophiles, high α-selectivity was observed and the boronate complexes were formed with almost complete retention of stereochemistry. The boronate complexes underwent a stereospecific 1,2-migration leading to tertiary allylic boronic esters with high er (>98:2). The scope of the reaction has been explored and found to embrace a broad range of both allylic carbamates and boronic esters. The methodology has been applied to an eight-step, stereoselective synthesis of each of the diastereoisomers of C30 botryococcene.     

Alkynyl Moiety for Triggering 1,2‐Metallate Shifts: Enantiospecific sp2–sp3 Coupling of Boronic Esters with p‐Arylacetylenes

The enantiospecific coupling of secondary and tertiary boronic esters to aromatics has been investigated. Using p‐lithiated phenylacetylenes and a range of boronic esters coupling has been achieved by the addition of N‐bromosuccinimide (NBS). The alkyne functionality of the intermediate boronate complex reacts with NBS triggering the 1,2‐migration of the group on boron to carbon giving a dearomatized bromoallene intermediate. At this point elimination and rearomatization occurs with neopentyl boronic esters, giving the coupled products. However, using pinacol boronic esters, the boron moiety migrates to the adjacent carbon resulting in formation of ortho boron‐incorporated coupled products. The synthetic utility of the boron incorporated product has been demonstrated by orthogonal transformation of both the alkyne and boronic ester functionalities.     

Visible Light Activation of Boronic Esters Enables Efficient Photoredox C(sp2)–C(sp3) Cross‐Couplings in Flow

We report herein a new method for the photoredox activation of boronic esters. Using these reagents, an efficient and high‐throughput continuous flow process was developed to perform a dual iridium‐ and nickel‐catalyzed C(sp²)–C(sp³) coupling by circumventing solubility issues associated with potassium trifluoroborate salts. Formation of an adduct with a pyridine‐derived Lewis base was found to be essential for the photoredox activation of the boronic esters. Based on these results we were able to develop a further simplified visible light mediated C(sp²)–C(sp³) coupling method using boronic esters and cyano heteroarenes under flow conditions.     

A highly enantioselective and diastereoselective synthesis of cyclobutanes via boronic esters

[formula: see text] Deprotonation of enantiopure (R,R)-1,2-dicyclohexyl-1,2-ethanediol 1-chloro-4-cyanobutylboronates 5 with LDA followed by treatment with anhydrous magnesium bromide yields (R)-(trans-2-cyanocyclobutyl)boronic esters 7 in high diastereomeric and enantiomeric purity. No cyclobutane formation has been observed in the absence of at least a catalytic amount of magnesium halide.     

A Comparative Study of the Relative Stability of Representative Chiral and Achiral Boronic Esters Employing Transesterification

A comparative study of the transesterification of five representative chiral and achiral boronic esters with various structurally modified diols was undertaken to qualitatively understand the factors influencing the relative stability of these boronic esters. Several factors such as chelation, conformation, steric bulk of the substituents, size of the heterocycle, and entropy influence the relative rate of transesterification as well as the stability of the boronic esters. Amongst these boronic esters, pinanediol phenylboronic ester was found to be the most stable boronic ester whereas DIPT boronic ester appeared to be thermodynamically the least stable one. The transesterification with sterically hindered diols was observed to be relatively slow, but afforded thermodynamically more stable boronic esters. Boronic esters derived from cis-cyclopentanediols and the bicyclo[2.2.1]heptane-exo,exo-2,3-diols are relatively more stable. This study not only presents the qualitative picture of relative stability of various boronic esters, but also provides helpful hints regarding the possible recovery of chiral auxiliaries. Many C ₂-symmetric chiral auxiliaries, such as 2,3-butanediol, 2,4-pentanediol, DIPT, and cis-cyclohexane-1,2-diol, can be retrieved by simple transesterification of the corresponding boronic esters with commercial inexpensive diols, such as pinacol, 1,3-propanediol, and neopentyl glycol.     

Allylpalladium umpolung in the three-component coupling synthesis of homoallylic amines

[Structure: see text] Homoallylic amines and alpha-amino esters were prepared via a Pd(II)-catalyzed coupling of boronic acids and 1,2-nonadiene with ethyl iminoacetate or aliphatic, aromatic, and heteroaromatic imines. The allylpalladium umpolung was induced by a Pd(OAc)2 catalyst with commercial phosphine ligands.     

Homologation and alkylation of boronic esters and boranes by 1,2‐metallate rearrangement of boron ate complexes

Organoboranes and boronic esters readily undergo nucleophilic addition, and if the nucleophile also bears an α‐leaving group, 1,2‐metallate rearrangement of the ate complex results. Through such a process a carbon chain can be extended, usually with high stereocontrol and this is the focus of this review. A chiral boronic ester (substrate control) can be used for stereocontrolled homologations with (dichloromethyl)lithium in the presence of ZnCl₂. Subsequent alkylation by an organometallic reagent also occurs with high levels of stereocontrol. Chiral lithiated carbanions (reagent control) can also be used for the reaction sequence with achiral boronic esters and boranes. Aryl‐stabilized sulfur ylide derived chiral carbanions can be homologated with a range of boranes including vinyl boranes in good yield and high diastereo‐ and enantioselectivity. Lithiated alkyl chlorides react with boronic esters, again with high stereocontrol, but both sets of reactions are limited in scope. Chiral lithiated carbamates show the greatest substrate scope and react with both boronic esters and boranes with excellent enantioselectivity. Furthermore, iterative homologation with chiral lithiated carbamates allows carbon chains to be “grown” with control over relative and absolute stereochemistry. The factors responsible for stereocontrol are discussed. © 2009 The Japan Chemical Journal Forum and Wiley Periodicals, Inc. Chem Rec 9: 24–39; 2009: Published online in Wiley InterScience ( www.interscience.wiley.com ) DOI 10.1002/tcr.20168     

Universal Reaction Mechanism of Boronic Acids with Diols in Aqueous Solution: Kinetics and the Basic Concept of a Conditional Formation Constant

To establish a detailed reaction mechanism for the condensation between a boronic acid, RB(OH)₂, and a diol, H₂L, in aqueous solution, the acid dissociation constants (${K{{{\rm BL}\hfill \atop {\rm a}\hfill}}}$ ) of boronic acid diol esters (HBLs) were determined based on the well‐established concept of conditional formation constants of metal complexes. The pK_a values of HBLs were 2.30, 2.77, and 2.00 for the reaction systems, 2,4‐difluorophenylboronic acid and chromotropic acid, 3‐nitrophenylboronic acid and alizarin red S, and phenylboronic acid and alizarin red S, respectively. A general and precise reaction mechanism of RB(OH)₂ with H₂L in aqueous solution, which can serve as a universal reaction mechanism for RB(OH)₂ and H₂L, was proposed on the basis of (a) the relative kinetic reactivities of the RB(OH)₂ and its conjugate base, that is, the boronate ion, toward H₂L, and (b) the determined pK_a values of HBLs. The use of the conditional formation constant, K′, based on the main reaction: RB(OH)₂+H₂L ${{\mathop \leftrightarrow \limits ^{K{_{1}}}_{}}}$ RB(L)(OH)^?+H₃O⁺ instead of the binding constant has been proposed for the general reaction of uncomplexed boronic acid species (B′) with uncomplexed diol species (L′) to form boronic acid diol complex species (esters, BL′) in aqueous solution at pH 5–11: B′+L′ ${{\mathop \leftrightarrow \limits ^{K{^\prime}}_{}}}$ BL′. The proposed reaction mechanism explains perfectly the formation of boronic acid diol ester in aqueous solution.     

Dynamic-covalent macromolecular stars with boronic ester linkages

Macromolecular stars containing reversible boronic ester linkages were prepared by an arm-first approach by reacting well-defined boronic acid-containing block copolymers with multifunctional 1,2/1,3-diols. Homopolymers of 3-acrylamidophenylboronic acid (APBA) formed macroscopic dynamic-covalent networks when cross-linked with multifunctional diols. On the other hand, adding the diol cross-linkers to block copolymers of poly(N,N-dimethylacrylamide (PDMA))-b-poly(APBA) led to nanosized multiarm stars with boronic ester cores and PDMA coronas. The assembly of the stars under a variety of conditions was considered. The dynamic-covalent nature of the boronic ester cross-links allowed the stars to reconfigure their covalent structure in the presence of monofunctional diols that competed for bonding with the boronic acid component. Therefore, the stars could be induced to dissociate via competitive exchange reactions. The star formation-dissociation process was shown to be repeatable over multiple cycles.     

Rhodium-catalyzed addition of aryl boronic acids to 1,2-diketones and 1,2-ketoesters

The metal complex Rh(acac)(CO)₂ in the presence of dicyclohexylphenylphosphine provides a useful catalyst system for the addition of boronic acids to 1,2-diketones and 1,2-ketoesters. The best yields were obtained when the transformation was performed in DME/H₂O at 80 °C with 4 equiv of the boronic acid. The results discussed herein extend the scope of the addition of arylboronic acids to highly activated diketones and ketoesters. The products of the reaction are useful in the synthesis of natural products containing oxygenation next to esters or ketones.     

Crystallization-controlled dynamic self-assembly and an on/off switch for equilibration using boronic ester formation

Macrocyclic boronic esters of different sizes can be prepared selectively from the same starting diboronic acid and 1,2-diol by means of an interesting dynamic self-assembly phenomena. More specifically, two kinds of macrocyclic boronic esters could be formed diastereoselectively and nearly quantitatively under neutral conditions by the addition of an appropriate guest molecule that acts as a template. Although a mixture of tetrol 1 and di(boronic acid) 2 in methanol gave only insoluble polymeric boronic esters, a soluble macrocyclic boronic ester, homo-[2+2], was obtained selectively in the presence of toluene as a guest molecule. Furthermore, when benzene was employed as a guest molecule, the selective formation of another macrocyclic boronic ester, hetero-[3+3], occurred. Interestingly, each of these macrocycles could be converted into the other in the presence of methanol and the appropriate guest molecule; however, under aprotic conditions, guest molecules encaged by the macrocyclic boronic ester could be exchanged without affecting its structure. Thus the presence or absence of a protic solvent could be used as a regulator to switch on or off the dynamic equilibrium of the system. In addition, investigation of the effect of reaction time, direct observation of the reaction mixture by NMR spectroscopy, and carrying out the reaction using optically active tetrol suggested that precipitation plays an essentially important role in the selective formation of the macrocyclic boronic esters. Thus, although both of [2+2] and [3+3] were present as solutes in the reaction mixture, the type of added guest molecule induced the selective precipitation of only one form of macrocyclic boronic ester, hence displacing the equilibrium of the system.     

A Comparative Study of the Relative Stability of Representative Chiral and Achiral Boronic Esters Employing Transesterification

Summary. A comparative study of the transesterification of five representative chiral and achiral boronic esters with various structurally modified diols was undertaken to qualitatively understand the factors influencing the relative stability of these boronic esters. Several factors such as chelation, conformation, steric bulk of the substituents, size of the heterocycle, and entropy influence the relative rate of transesterification as well as the stability of the boronic esters. Amongst these boronic esters, pinanediol phenylboronic ester was found to be the most stable boronic ester whereas DIPT boronic ester appeared to be thermodynamically the least stable one. The transesterification with sterically hindered diols was observed to be relatively slow, but afforded thermodynamically more stable boronic esters. Boronic esters derived from cis-cyclopentanediols and the bicyclo[2.2.1]heptane-exo,exo-2,3-diols are relatively more stable. This study not only presents the qualitative picture of relative stability of various boronic esters, but also provides helpful hints regarding the possible recovery of chiral auxiliaries. Many C ₂-symmetric chiral auxiliaries, such as 2,3-butanediol, 2,4-pentanediol, DIPT, and cis-cyclohexane-1,2-diol, can be retrieved by simple transesterification of the corresponding boronic esters with commercial inexpensive diols, such as pinacol, 1,3-propanediol, and neopentyl glycol. This paper is dedicated to the memory of my mentor, the late Professor Herbert C. Brown (1912–2004). Professor Herbert C. Brown deceased on December 19, 2004. The work described herein was carried out at Purdue University during my stay as a post-doctoral research associate     

Regio‐ and Stereoselective Homologation of 1,2‐Bis(Boronic Esters): Stereocontrolled Synthesis of 1,3‐Diols and Sch 725674

1,2‐Bis(boronic esters), derived from the enantioselective diboration of terminal alkenes, can be selectively homologated at the primary boronic ester by using enantioenriched primary/secondary lithiated carbamates or benzoates to give 1,3‐bis(boronic esters), which can be subsequently oxidized to the corresponding secondary‐secondary and secondary‐tertiary 1,3‐diols with full stereocontrol. The transformation was applied to a concise total synthesis of the 14‐membered macrolactone, Sch 725674. The nine‐step synthetic route also features a novel desymmetrizing enantioselective diboration of a divinyl carbinol derivative and high‐yielding late‐stage cross‐metathesis and Yamaguchi macrolactonization reactions.     

Structure of 4-[4-(Dimethylamino)-Phenylazo] Benzeneboronic Acid and Its Cyclic Esters with D-Glucose: A Computational Study

We present results from a computational study of 4-[4-(dimethylamino)-phenylazo] benzene boronic acid (DABBA) (the 4'-boronic acid isomer of the aminoazobenzene dye N,N-dimethylaminoazobenzene) and its associated anion, as well as, several cyclic esters formed from these azoborates and various conformers of D-glucose. Azo dyes that also contain one or more boronic acid functional groups are of practical importance in the development of chemical sensors for saccharide recognition because of their ability to induce a visible color change upon binding. The lowest-energy DABBA:D-glucose esters found in this investigation consistently involved at least one of the exocyclic hydroxymethyl groups on the D-glucose moiety rather than vicinal cis or trans diol arrangements of hydroxyl groups on the ring.     

Regioselective and 1,2‐cis‐α‐Stereoselective Glycosylation Utilizing Glycosyl‐Acceptor‐Derived Boronic Ester Catalyst

Regioselective and 1,2‐cis‐α‐stereoselective glycosylations using 1α,2α‐anhydro glycosyl donors and diol glycosyl acceptors in the presence of a glycosyl‐acceptor‐derived boronic ester catalyst. The reactions proceed smoothly to give the corresponding 1,2‐cis‐α‐glycosides with high stereo‐ and regioselectivities in high yields without any further additives under mild reaction conditions. In addition, the present glycosylation method was successfully applied to the synthesis of an isoflavone glycoside.