Formal intermolecular [2 + 2] cycloaddition reaction of allenamide [corrected] with alkenes via gold catalysis

An efficient method was developed to construct the densely functionalized cyclobutane[corrected] adducts through formal intermolecular cycloaddition of allenamides [corrected] with electron-rich olefins via gold catalysis, in which vinyl ethers/amides and electron-rich styrenes worked very well. In addition, a series of allenamide [corrected] dimerization products were prepared from the same allenamide [corrected] substrates.     

Synthesis of 1-acetyl-2-silyoxycycloheptane derivatives via highly stereoselective formal [5+2] cycloaddition reaction

A stereoselective [5+2] cycloaddition reaction using a new five-carbon unit, that has a dicobalt acetylene complex moiety and an enol silyl ether moiety, was developed. In the presence of a Lewis acid, the five-carbon unit reacted with an enol triisopropylsilyl ether to give a 1-acetyl-2-silyoxycycloheptane derivative, in which the three contiguous substituents on the seven-membered ring arrange cis to each other.     

Cobalt-catalyzed intermolecular [2 + 2 + 2] cycloaddition for the synthesis of 1,3-cyclohexadienes

A cobalt(I)-catalyzed [2 + 2 + 2] cycloaddition reaction between an internal acceptor-substituted alkyne and a terminal alkene leads to the formation of regiochemically enriched polysubstituted 1,3-cyclohexadiene derivatives in acceptable yields when methyl butynoate is used, whereas regiochemically pure products are formed in good yields form phenyl propyonate. The concurrent cyclotrimerization reaction of the alkyne to the corresponding benzene derivative is dependent on the sterical bulk of the alkyne and is considerably reduced with the sterically more hindered alkyne.     

Expedient synthesis of a highly substituted tropolone via a 3-oxidopyrylium [5+2] cycloaddition reaction

An expedient ten-step synthesis of a substituted tropolone is described. The synthesis involves a 3-oxidopyrylium [5+2] cycloaddition reaction with acrylonitrile as the key step, affording a highly functionalized [3.2.1]-bicycle 10 as a single regioisomer. The nitrile substituent of the reduced cycloadduct 12 permits efficient ether-bridge cleavage and tropolone 15 is obtained after a final bis-oxidation procedure. The pyranulose acetate cycloaddition precursor was derived from 3-methyl-2-furoate.     

Stereoselective synthesis of bicyclo[3.1.1]heptane derivatives via intramolecular photocycloaddition reaction

Optically active 1,3-bridged cyclobutanes 10 of the bicyclo[3.1.1]heptane ring system and 1,2-bridged cyclobutanes 11 of the bicyclo[3.2.0]heptane ring system were produced by UV irradiation of alpha,beta,gamma,delta-unsaturated esters 9a and 9c-f. The preference of endo-stereochemistry at C-6 bridged head was observed in cross-adducts 10. On the other hand, irradiation of conjugated dienol 9b led via only parallel cycloaddition to 1,2-bridged cyclobutane 11.     

Catalytic enantioselective intermolecular [2 + 2 + 2] cycloaddition of an alkene and two alkynes

A catalytic enantioselective intermolecular [2 + 2 + 2] cycloaddition of one molecule of alkene (enone) and two molecules of alkyne was developed in the presence of a nickel complex modified by chiral monodentate oxazoline ligands, which have not previously been used as chiral ligands for transition metals in asymmetric catalysts, and an aluminium phenoxide.     

One-pot synthesis of substituted benzene via intermolecular [2+2+2] cycloaddition catalyzed by air-stable Ru(II)-complex

Intermolecular [2+2+2] cycloaddition reaction employing an air-stable ruthenium perchloro-cyclobutenonyl complex as a catalyst is reported. A series of internal alkynes were incorporated with dimethyl acetylene-dicarboxylate in a ratio of 1:2 to give various substituted benzenes in high yield and high chemoselectivity.     

Cyclooctanone synthesis via a formal [6+2] cycloaddition reaction of a dicobalt acetylene complex

An efficient formal [6+2] cycloaddition reaction of a new six-carbon unit with enol silyl ether was developed on the basis of a dicobalt hexacarbonyl propargyl cation species. Under the influence of EtAlCl₂, 6-benzoyloxy-2-(triisopropylsilyloxy)-1-hexen-4-yne-dicobalthexacarbonyl reacted with enol triisopropylsilyl ethers to yield 7-(triisopropylsilyloxy)-3-cyclooctyn-1-one-dicobalthexacarbonyl derivatives in good yield. The reactions with cyclic enol silyl ethers as well as acyclic enol silyl ethers exhibited remarkably high diastereoselectivity.     

Synthesis of 5-azaindolizine derivatives by the palladium-catalyzed intermolecular formal [3+2] cycloaddition of alkylidenecyclopropanes with 1,2-diazines

The palladium-catalyzed formal [3+2] cycloaddition reaction of alkylidenecyclopropanes with 1,2-diazines proceeded smoothly to give the corresponding 5-azaindolizine derivatives in good to allowable yields. For example, in the presence of 5 mol % of Pd(PPh(3))(4), the reaction of 1-propylhexylidenecyclopropane with phthalazine or with pyridazine proceeded at 120 degrees C without solvent, and the corresponding 2-(1-butylpentyl)pyrrolo[2,1-a]phthalazine or 6-(1-butylpentyl)pyrrolo[1,2-b]pyridazine was obtained in 61% or 49% yield, respectively.     

Reversible on-off switching of spin-crossover behavior via photochemical [2+2] cycloaddition reaction

Herein,we report the first example showing the reversible on-off switching of spin-crossover(SCO)property by solid state photochemical[2+2]reaction.The ultraviolet(UV)light-induced[2+2]cycloaddition reaction of 3-spy ligands in a twodimensional(2D)Hofmann-type framework[Fe(3-spy)₂{Pd(CN)₄}](1,3-spy=3-styrylpyridine),which shows a hysteretic twostep SCO behavior,gives a 3D Hofmann-type framework[Fe(rctt-3-ppcb){Pd(CN)₄}](2,rctt-3-ppcb=rctt-1,3-bis(3-pyridyl)-2,4-bis(phenyl)cyclobutane,r=reference group,c=cis and t=trans)accompanied with the disappearing of SCO properties.Moreover,upon heating at 250℃ for 12 h,the rctt-3-ppcb ligand in 2 could be partially dedimerized to 3-spy with 68%completion through single-crystal-to-single-crystal(SCSC)transformation,giving the annealing complexes[Fe(3-spy)1.36(rctt-3-ppcb)0.32{Pd(CN)₄}](3)which display an incomplete SCO behavior.The 2■3 interconversion is successfully achieved via continuous UV irradiation and thermal annealing,demonstrating the effectiveness of photochemical[2+2]reaction on switching on-off SCO properties.     

Large-scale synthesis of 1,1,3,3,6-pentamethyl-1,3-disilaindan-5-ol via a CoBr2/Zn-catalyzed [2+2+2] cycloaddition reaction

1,1,3,3,6-Pentamethyl-1,3-disilaindan-5-ol (2) is a key intermediate in the synthesis of new sila-substituted gonadotropin releasing hormone receptor antagonists, such as 1. In order to produce sufficient quantities of 1 for pharmacological and toxicological evaluation, an efficient synthesis of 2 has been developed. (1,1,3,3,6-Pentamethyl-1,3-disilaindan-5-yl)methanal (11) was synthesized in a one-pot procedure. CoBr₂/Zn-catalyzed [2+2+2] cycloaddition of diyne 3 with the commercially available monoalkyne 15 was achieved through a slow addition of 3 and CoBr₂ to a mixture of 15 and zinc powder in refluxing acetonitrile, giving rise to 5-(diethoxymethyl)-1,1,3,3,6-pentamethyl-1,3-disilaindane (14). In-situ aqueous acidification yielded 11. Conversion to 2 was then achieved via a Baeyer-Villiger oxidation followed by hydrolysis under basic condition. This novel methodology is useful, not only for the rapid, large-scale synthesis of 2, but also for the synthesis and development of new sila-substituted drugs derived from 11.     

Stereoselective preparation of methylenecyclobutane-fused angular tetracyclic spiroindolines via photosensitized intramolecular [2+2] cycloaddition with allene

Irradiation of 3-(hexa-4,5-dienyl)indole derivatives in the presence of 3′,4′-dimethoxyacetophenone by a high-pressure mercury lamp through Pyrex glass gave the corresponding [2+2] cycloaddition products stereoselectively in high yields. The major product was a methylenecyclobutane-fused angular tetracyclic spiroindoline derivative produced by the [2+2] cycloaddition through a parallel orientation. The minor product was a hexahydromethanocarbazole derivative through a crossed orientation. Electron-withdrawing substituents, such as acyl or alkoxycarbonyl, on the indole nitrogen were suitable for this reaction.     

Catalytic asymmetric synthesis of stable oxetenes via Lewis acid-promoted [2+2] cycloaddition

A highly enantioselective and atom-economical [2 + 2] cycloaddition of various alkynes with trifluoropyruvate using a dicationic (S)-BINAP-Pd catalyst has been established. This is the first enantioselective synthesis of stable oxetene derivatives, whose structure has been clarified by X-ray analysis. This catalytic process offers a practical synthetic method for oxetene derivatives (catalyst loading: up to 0.1 mol %), which can serve as novel chiral building blocks for pharmaceuticals and agrochemicals and can also be transformed into a variety of enantiomerically enriched CF(3)-substituted compounds with high stereoselectivity.     

Synthesis of acridinedione derived mono spiro-pyrrolidine/pyrrolizidine derivatives—a facile approach via intermolecular [3+2] cycloaddition reaction

A facile synthesis of acridinedione derived mono spiro-pyrrolidine and pyrrolizidine derivatives has been accomplished by 1,3-dipolar cycloaddition reaction. The O-acryloylacridinediones, as dipolarophiles reacted with azomethine ylide derived from di-/tri-ketones and sec-amino acids to give acridinedione derived mono spiropyrrolidine/pyrrolizidine derivatives in good yield.     

Role of anions in the synthesis of cyclobutane derivatives via [2 + 2] cycloaddition reaction in the solid state and their isomerization in solution

trans-3-(4'-Pyridyl)acrylic acid (4-PA) is inert to photodimerization reaction both in solution and solid state. It is made photoreactive by forming salts with various acids. The anions of these salts play a key role in directing the packing of 4-PAH(+) in the solid state. The anions CF(3)CO(2)(-), Cl(-), ClO(4)(-), and BF(4)(-) direct the parallel alignments of 4-PAH(+) in head-to-tail (HT) fashion and lead to the formation of HT-photodimer. On the other hand, bivalent anion SO(4)(2-) directs parallel alignment of 4-PAH(+) in head-to-head (HH) fashion and lead to the formation of HH-photodimer. The details of the anion-controlled stereoselective syntheses of these two cyclobutane derivatives are presented. Interestingly, both cyclobutane compounds undergo isomerization from rctt-form to rctc-form in solution catalyzed by acid.