超临界二氧化碳中丙烯酸与苯乙烯共聚

以超临界二氧化碳为介质, 进行丙烯酸与苯乙烯共聚反应, 合成出具有疏水链段结构的改性丙烯酸聚合物. 研究了压力和投料比对聚合反应的影响. 用红外光谱、紫外光谱和核磁共振谱分析其结构及组成. 采用粘度计测定其水溶液粘度随pH值的变化. 研究结果表明, 该聚合物水溶液具有明显的疏水缔合作用.     

超临界CO2中丙烯酸含氟酯疏水改性聚丙烯酸的合成

研究了在超临界二氧化碳条件下 ,丙烯酸 1,1 二氢全氟辛酯 (FOA)对聚丙烯酸疏水改性的共聚反应 .发现与通常聚合方法相比含氟丙烯酸酯的产率得到提高 ;反应时间从 2 4h缩短到 4h ;所得产物的后处理也更容易 .同时发现温度对反应有影响 ,含氟酯单体在低温 (T <5 5 0℃ )时活性高于丙烯酸单体 ,在高温 (T >6 0 0℃ )时丙烯酸活性提高较大 .而共聚物水溶液粘度随pH值变化先上升后下降 ,在pH =5 0出现峰值 ,显示其中有分子间缔合存在 .与改性聚丙烯酰胺不同 ,改性聚丙烯酸水溶液粘度随FOA含量的增加而单调上升 ,也证明了分子间缔合的存在     

疏水缔合水溶性聚合物的合成研究进展

综述了疏水缔合水溶性聚合物的合成的最新研究进展。主要合成方法有非均相共聚、均相共聚、胶束共聚、反相微乳液聚合、无皂乳液聚合、活性阴离子聚合以及超临界二氧化碳介质等。     

超临界二氧化碳在高分子合成及加工领域的应用

重点概述了近年来超临界二氧化碳作为环境友好介质在高分子合成与加工方面研究的新进展,具体介绍了在超临界二氧化碳中丙烯酸的合成及疏水改性方面所做的工作,并在此基础上,展望超临界二氧化碳作为高分子合成介质的前景。     

疏水化两性离子纤维素接枝共聚物/疏水化聚丙烯酰胺复合溶液的粘性行为

疏水缔合作用;羧甲基纤维素;疏水化两性离子纤维素接枝共聚物/疏水化聚丙烯酰胺复合溶液的粘性行为     

超临界二氧化碳中的化学反应

超临界流体;溶剂;超临界二氧化碳中的化学反应     

双峰泡孔结构聚苯乙烯材料的制备

以超临界二氧化碳(Sc-CO2)为物理发泡剂,在高压釜中采用两种温度设定方式和降压对聚苯乙烯(PS)进行发泡,测试、分析发泡样品的泡孔结构、泡体密度和断面润湿性能.结果表明,仅通过降压只获得单峰的泡孔结构,而升温与降压协同作用可获得双峰的泡孔结构,大、小泡孔分别在升温和降压阶段成核形成;在发泡温度100℃、饱和温度30~70℃下制备的发泡样品中,大、小泡孔的平均直径分别为50~216和10~15μm.大泡孔的直径较大和密度较高都有利于降低样品的泡体密度,最低达0.15 g/cm3.单峰泡孔结构能在一定程度上提高样品断面的疏水性,使静态接触角(CA)从PS的本征值(87.1°)增大至138.8°;双峰泡孔结构可赋予样品断面更高的CA(155.1°),呈现超疏水特性.     

荧光探针法研究疏水改性聚丙烯酰胺溶液的疏水缔合行为

采用胶束共聚 共水解方法合成疏水改性水溶性聚合物聚(丙烯酰胺/丙烯酸钠/N 辛基丙烯酰胺)[P(AM/NaAA/C8AM)],并以芘为荧光探针,应用稳态荧光光谱法研究了它的疏水缔合行为。结果表明,随聚合物浓度、疏水单体摩尔分数、疏水侧链长和温度的增加,疏水缔合作用增强;不同疏水单体含量的P(AM/NaAA/C8AM)的临界缔合浓度为1.5~3.0 g/L;表面活性剂十二烷基硫酸钠(SDS)与P(AM/NaAA/C8AM)发生了强烈的疏水相互作用,形成混合胶束,得到SDS的临界胶束浓度(CMC)为8×10-3 mol/L;由于聚合物链上羧基的存在,使其具有良好的 pH敏感性,随 pH值的增大,P(AM/NaAA/C8AM)的疏水缔合作用呈现先减弱后恒定再增强的变化。     

疏水性缔合作用的研究

在水溶性高分子中引入疏水性基团会对其性质产生重要影响,主要表现在疏水性基团在水溶液中发生疏水性缔合引起的流变学性能的改变。文章详细阐述了疏水性缔合的概念与表现形式,以及对水溶性高分子进行疏水改性的方法和对疏水性缔合进行研究的方法。     

疏水缔合聚丙烯酰胺的合成和表征的研究进展

论文综述了疏水缔合聚丙烯酰胺(HAPAM)的合成方法,包括共聚合法和化学改性法。共聚法主要包括非均相共聚法,均相共聚法,反相(微)乳液聚合法,胶束共聚合法,模板聚合法,无皂乳液聚合法,活性阴离子聚合法,超临界CO2介质法。此外,论文还对HAPAM的表征方法进行了综述,并对HAPAM的合成和表征方面的发展前景进行了展望。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.