Surface tension of liquid marbles

Effective surface tension of liquid marbles was measured by three independent experimental techniques: vibration, shape analysis, and maximal marble height. Marbles obtained with various powders: polyvinylidene fluoride, polytetrafluoroethylene, polyethylene, and lycopodium, were studied. The effective surface tension depends strongly on the kind of powder coating the marble. The capillary interaction between particles coating the marble was involved for qualitative interpretation of the reported data.     

Surface tension of fluoroalkanes in a liquid phase

The parachor assigned to fluorine atoms in fluorinated alkanes was examined. The values vary systematically with the number of fluorine atoms in the molecule. Partially fluorinated alkanes show large values, while perfluoroalkanes give a smaller value which is constant for all the perfluoroalkanes examined in this work. The molecular structure seems to be important for the intermolecular interaction of this series of compounds, and may be responsible for the deviation from the parachor additivity rule.     

Surface tension of binary liquid mixtures

Experimental measurements of the liquid-air interfacial tension are reported for the systems benzene + n-hexane at 20°C and acetone + isooctane at 25°C. The excess surface tension for both systems is negative while the surface tension itself for the second system, when plotted against composition, exhibits a flat minimum. An attempt is made to interpret this behavior in terms of basic thermodynamic quantities of the mixtures such as the excess free enthalpy, the heat of mixing, the excess volume, and the isothermal compressibility.     

Surface tension drawing of liquid from microplate capillary wells

Pressure differentials are routinely used to actuate flow in capillaries. We advance here an alternative means of flow generation that capitalizes on the extension of a liquid bridge achieved by the drawing of a rod through the action of surface tension. This meets the exigencies of creating controllable flow using simpler and more compact means. We found the ability to generate controllable flow to be strongly affected by the liquid bridge sustaining features, and that the use of rod diameters larger than the capillary was more conducive. The extensional flow resulting from the rupture of the liquid bridge was also found to have a strong circulation component which facilitated mixing. The approach here is highly amenable for use in capillary well microplates which have significant advantages over standard microplates. The features of this approach offer usage possibilities in biochemical applications in the field, such as in the leukocyte cell adhesion and hemagglutination tests of blood samples.     

Surface tension of binary mobile phases for liquid chromatography

The dependences of the surface tension of some binary mobile phases for normal and reversed-phase liquid chromatography on the volume fraction of modifiers are considered. The dependences are described by polynomial functions containing surface tensions of the initial components along with empirical coefficients. The compositions with extrema of surface tension deviations from additive values were determined.     

Surface tension of ionic liquids and ionic liquid solutions

Some of the most active scientific research fronts of the past decade are centered on ionic liquids. These fluids present characteristic surface behavior and distinctive trends of their surface tension versus temperature. One way to explore and understand their unique nature is to study their surface properties. This critical review analyses most of the surface tension data reported between 2001 and 2010 (187 references).     

Surface tension and its temperature coefficient for liquid metals

Temperature-dependent surface tension gamma(lv)(T) and its temperature coefficient (T) [=dgamma(lv)(T)/dT] for liquid metals are thermodynamically determined on the basis of an established model for surface energy of crystals. The model predictions correspond to the available experimental or theoretical results. It is found that for metallic liquids gamma(lv)(T(m)) proportional, variant H(v)/V(m)(2/3), gamma(lv)(T) proportional, variant T, and (T) proportional, variant T over a certain temperature range (including T < T(m) and T >/= T(m)), where H(v) and V(m) are the liquid-vapor transition enthalpy at boiling temperature T(b) and the atomic volume at melting temperature T(m), respectively. Furthermore, T(m)(T(m))/gamma(lv)(T(m)) almost remains constant, which gives a way to estimates of (T(m)) values when T(m) and gamma(lv)(T(m)) are known.     

Surface tension of some liquid crystals in the cyanobiphenyl series

The temperature dependence of the surface tension was measured by the pendant drop method for four compounds from the homologous series of alkylcyanobiphenyls (nCB), in the nematic liquid crystal and isotropic phases. For 8CB (octylcyanobiphenyl) the temperature dependence was also measured in the smectic range. Not very close to the isotropic transition temperature, and with the exception of 8CB, the surface tension decreases with increase in temperature in the nematic range. A downward jump at the transition temperature was observed for all liquid crystals studied. The shape of the drop in the smectic A phase of 8CB gives indications of stratification in a system of terraces.     

Surface tension of pure liquid lanthanide and early actinide metals

A systematic theoretical study of the surface tension of liquid rare earth metals and early actinides is performed. An equation, based on the theoretical considerations suggested by Eyring, enables one to calculate the surface tension of elementary substances in a wide temperature range from melting to boiling points. The results of temperature-dependent surface tension calculations of a pure liquid terbium (1629–1880?K) are fitted as γ?=?845?0.1 (T???T _m) (mJ?m²), where the surface tension decreases linearly with temperature. The surface tension was also calculated, at melting points, for all the liquid rare earth metals from La to Lu and for the first six metals of the actinide series from Ac to Pu. It is observed that the lanthanides may be divided into three groups in accordance with their electronic structure. Mostly, the calculated results agree well with available experimental data.     

Surface tension of some liquid crystals in the cyanobiphenyl series

The temperature dependence of the surface tension was measured by the pendant drop method for four compounds from the homologous series of alkylcyanobiphenyls (nCB), in the nematic liquid crystal and isotropic phases. For 8CB (octylcyanobiphenyl) the temperature dependence was also measured in the smectic range. Not very close to the isotropic transition temperature, and with the exception of 8CB, the surface tension decreases with increase in temperature in the nematic range. A downward jump at the transition temperature was observed for all liquid crystals studied. The shape of the drop in the smectic A phase of 8CB gives indications of stratification in a system of terraces.     

Surface tension of liquid metals and alloys — Recent developments

Surface tension measurements are a central task in the study of surfaces and interfaces. For liquid metals, they are complicated by the high temperatures and the consequently high reactivity characterising these melts. In particular, oxidation of the liquid surface in combination with evaporation phenomena requires a stringent control of the experimental conditions, and an appropriate theoretical treatment. Recently, much progress has been made on both sides. In addition to improving the conventional sessile drop technique, new containerless methods have been developed for surface tension measurements. This paper reviews the experimental progress made in the last few years, and the theoretical framework required for modelling and understanding the relevant physico-chemical surface phenomena.     

Surface tension of the indium-lead system in the liquid and solid states

Temperature and concentration dependences of the surface tension of indium-lead alloys in the liquid and solid states are measured. The results obtained by different researchers are discussed.     

Surface tension measurements of imidazolium-based ionic liquids at liquid–vapor equilibrium

A series of high quality 1-alkyl-3-methylimidazolium-based ionic liquids are synthesized and used for studying their surface tension. The capillary rise method is used for measuring the surface tension of I⁻, Cl⁻, PF₆⁻, and BF₄⁻ salts in the temperature range 298–393 K. The capillary apparatus is evacuated and sealed under vacuum. The experimental results show that surface tension of these compounds depend systematically on temperature.     

Surface tension measurements in freely suspended bubbles of thermotropic smectic liquid crystals

We present an experimental technique for the inflation of freely suspended films of thermotropic smectic liquid crystals to macroscopic bubbles. These bubbles have many properties in common with well known lyotropic soap bubbles, but on the other hand represent a completely different class of material with different physical properties and new phenomena. We describe the generation of such smectic bubbles and compare their physical properties with those of lyotropic soap bubbles. The measurement of inner pressure versus curvature is used for the determination of surface tensions of the smectic materials.     

Surface tension of electrolyte solutions

A simple analytic expression is derived for the excess surface tension of electrolyte solutions, which is in good agreement with the experimental data on NaCl in the concentration range up to as high as 1 M. This expression is consistent with the following two theories: (i) The recent theory of Levin and Flores-Mena (Europhys Lett (2001) 56:187), who demonstrated the important contribution of the formation of an ion free layer at the air–electrolyte solution interface, and (ii) the Onsager–Samaras theory (J Chem Phys (1934) 2:528) modified by taking into account the ion-free layer effect. It is shown that the excess surface tension consists of three parts: the contributions of the ion-free layer, the image interaction between the electrolyte ions and the ion-free layer, and the image interaction between the electrolyte ions and air.     

Surface tension of polymer solutions

Summary Heats of dilution and surface tensions of a polystyrene-cyclohexane solution have been measured in a wide temperature range covering the theta-temperature. Surface tensions as well as interaction parameters obtained from heats of dilution show no discontinuity at0. Concentration of polymer adsorbed on the surface has been calculated, it decreases with increasing temperature. Plots of interaction parameter vs.1/T give two straight lines which cut at the theta-temperature.

---

Zusammenfassung Verdünnungswarmen and Oberflächenspannungen einer Polystyrol-Cyclohexan-Lösung wurden in einem großen Temperaturbereich gemessen, der die Thetatemperatur einschließt. Aus den Verdünnungswärmen wurden die Wechselwirkungsparameter berechnet. Sowohl Oberflächenspannung als such Wechselwirkung zeigen gegen die Temperatur aufgetragen keine Diskontinuität an der Thetatemperatur. Die Konzentration des an der Oberfläche adsorbierten Polymeren wurde berechnet, sic nimmt mit steigender Temperatur ab. Auftragungen des Wechselwirkungsparameters gegen die reziproke Temperatur ergeben zwei Gerade, die sich bei der Thetatemperatur schneiden.

---

---

With 5 figures