Human fibrinogen adsorption onto single-walled carbon nanotube films

The adsorption behavior of human fibrinogen (Hfg) on single-walled carbon nanotube (SWNT) films was investigated using scanning electron microscopy (SEM) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. It was shown in the SEM images that fibrinogen was adsorbed strongly on the surface of SWNT when the samples were incubated in the Hfg solutions for 10 min. The dependence of adsorption on the concentration of fibrinogen was also investigated and it was found that adsorption increased with increasing concentration. In order to further explore the adsorption of fibrinogen on SWNT surface, NEXAFS spectra were obtained at the N K-edge and the C K-edge. The results confirmed the conclusion regarding the dependence of adsorption on fibrinogen concentration. It is demonstrated that, due to its high sensitivity to the surface elements, NEXAFS spectroscopy is a powerful tool to investigate the adsorption of fibrinogen on SWNT films.     

Light-induced dielectric transparency in single-walled carbon nanotube films

Light-induced difference THz spectroscopy was used to investigate the dielectric response of free-stand single-walled carbon nanotubes (SWCNTs) films in THz region. We observed an enhanced transmission of the peak-signal of THz wave through SWCNTs films under 800 nm pump. In frequency domain, the transparency came from 0.5 to 2.1 THz and the absorption was in 2.1–3.0 THz region. The pump power dependency of the transmission showed this was a nonlinear effect. The dielectric constant response of the SWCNTs films was analyzed theoretically. The analysis suggests that the nonlinear optical properties stem from two factors, which are Drude and Lorentz term for metallic and semiconducting SWCNTs, respectively.     

Free-standing highly conductive transparent ultrathin single-walled carbon nanotube films

Transparent and conductive single-walled carbon nanotube (SWNT) films are of great importance to a number of applications such as optical and electronic devices. Here, we describe a simple approach for preparing free-standing highly conductive transparent SWNT films with a 20-150 nm thickness by spray coating from surfactant-dispersed aqueous solutions of SWNTs synthesized by an improved floating-catalyst growth method. After the HNO(3) treatment, dipping the SWNT films supporting on glass substrates in water resulted in a quick and nondestructive self-release to form free-standing ultrathin SWNT films on the water surface. The obtained films have sufficiently high transmittance (i.e., 95%), a very low sheet resistance (i.e., ～120 Ω/sq), and a small average surface roughness (i.e., ～3.5 nm for a displayed 10 × 10 μm area). Furthermore, the floating SWNT films on the water surface were easily transferred to any substrates of interest, without intense mechanical and chemical treatments, to preserve their original sizes and network structures. For example, the transferred SWNT films on poly(ethylene terephthalate) films are mechanically flexible, which is a great advantage over conventional indium-tin oxide (ITO) and therefore strongly promise to be "post ITO" for many applications.     

In situ optical spectroelectrochemistry of single-walled carbon nanotube thin films

A detailed study is presented on the optical absorption of thin films of single-walled carbon nanotubes (SWNT) under electrochemical conditions. The procedure for the preparation of free-standing semitransparent films of SWNT is used for the fabrication of a working electrode for transmission optical spectroelectrochemistry. The analysis of the potential dependent spectroscopic response of the SWNT film benefits from the widest possible electrochemical window, in which the charging of SWNT can safely be investigated. This electrochemical window is not limited by parasitic electrochemistry and/or galvanic breakdown reactions occurring at supporting electrode materials such as indium–tin oxide conducting glass or semitransparent Pt film, which were employed in earlier studies. Electrochemical doping of SWNT is observable at the optical absorptions, which are assigned to allowed electronic transitions between van Hove singularities in the density of states of SWNT. Furthermore, the spectral response of counterions, balancing the charging of the nanotube skeleton, is traceable at certain conditions. The latter effect is monitored here through the overtones of C–H stretching vibrations from tetrabutylammonium cations.     

Glass transition of polymer/single-walled carbon nanotube composite films

The glass-transition temperatures (T_g's) of nanocomposites of polystyrene (PS) and single-walled carbon nanotubes were measured in the bulk and in thin films with differential scanning calorimetry and spectroscopic ellipsometry, respectively. The bulk T_g of the nanocomposites increased by approximately 3 °C and became much broader than that of PS. For the nanocomposite films thinner than 45 nm, T_g decreased with decreasing film thickness [i.e., ΔT_g(nano) < 0]. This phenomenon also occurred in thin PS films, the magnitude of the depression in PS [ΔT_g(PS)] being somewhat larger. The film thickness dependence and the differences in the magnitude of ΔT_g in the two systems were examined in light of current theory, and a quantitative comparison was made. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 3339–3345, 2003     

Large-scale fabrication of aligned single-walled carbon nanotube array and hierarchical single-walled carbon nanotube assembly

Aligned single-walled carbon nanotubes (SWNTs) and hierarchical SWNT assembly were fabricated by electrospinning. The high fiber elongation and high DC electric field applied during the electrospinning process result in the orientation of the SWNTs along the axial direction of the fiber. The alignment of the electropsun composite fiber transfers this local SWNT orientation to macroscopically aligned SWNTs. After removing the polymer component from the aligned composite fiber, we produced large area aligned SWNTs. The results show that the directional control of SWNT alignment and debundling of SWNTs into individual tubes can be simultaneously realized.     

Electrochemical sensing of hydroxylamine by gold nanoparticles on single-walled carbon nanotube films

The arrays of gold nanoparticles (AuNPs) were fabricated on flexible and transparent single-walled carbon nanotube (SWCNT) films using the electrochemical deposition method, and the patterned nanotubes were then used as electrodes for hydroxylamine detection. The sizes and densities of the AuNPs could easily be controlled by varying the amount of charge deposited, and the gold-deposited area showed a homogeneous distribution on the exposed SWCNT film surface. X-ray diffraction analysis of the AuNPs shows a face-centered cubic structure that is dominated by the lowest energy {111} facets. The oxidation of the hydroxylamine on the AuNP-deposited SWCNT films depended strongly on the solution pH, and the maximum catalytic current was observed at a pH of 9.0. A linear electrical response was observed for concentrations ranging from 0.016 to 0.210 mM, and the detection limit and the sensitivity were 0.72 μM and 165.90 μAmM^?1 cm^?2, respectively. Moreover, the amperometric response in hydroxylamine showed a stable response for a long time (300 s), during which time it retained 94% of its initial value. In the long-term storage stability test, the current response to hydroxylamine decreased slightly, with only 17% leakage after 30 days.     

Tailoring wettability change on aligned and patterned carbon nanotube films for selective assembly

The effects of oxygen reactive ion etching (RIE) on the surface wettability of aligned carbon nanotube (CNT) films have been systematically investigated. It was found that 3 s of RIE treatment could change the surface of CNT films from hydrophobic to more hydrophilic. The degree of modification in the surface wettability of the film could be controlled by the flow rate of O2 gas during the RIE process. It is proposed that such a surface hydrophobicity change is related to the opened structure and functionalized tip of as-treated CNTs by oxygen reactive ions. More importantly, after the RIE treatment, focused laser pruning was utilized to trim the surface layer of treated CNTs and revert them back to a hydrophobic surface. Combined with the laser pruning technique and O2 RIE treatment, CNT templates with interlaced wettability surfaces in a stripe pattern have been fabricated. It has been demonstrated that this interlaced and structured wettability pattern can be used to selectively assemble microspheres or quantum dots on the aligned CNT films with desired patterns.     

Highly transparent and flexible field emission devices based on single-walled carbon nanotube films

Single-walled carbon nanotubes (SWNTs) have been used successfully to fabricate highly transparent and flexible field emission displays (FEDs). Field emission measurements indicated that SWNTs films have great potential to work as building blocks for next generation transparent and flexible FEDs.     

Vertical alignment of single-walled carbon nanotube films formed by electrophoretic deposition

Films of chemically shortened and functionalized single-walled carbon nanotubes (SWNTs) have been formed on a gold electrode by electrophoretic deposition. Applying ultrasonic energy resulted in dramatic changes of the film morphology; the deposited SWNT bundles reassembled and oriented normal to the electrode. Oriented SWNT bundles with high density (more than 250 bundles/microm (2)) not only presented narrow size distributions, but uniformly spread on the electrode. We discuss the mechanism of SWNT orientation by analyzing the variation in the film morphology with ultrasonication time. In addition, we suggest that the 3D displays of AFM images can lead to misjudgment of nanotube alignment. The method for aligning SWNTs normal to the electrode may be competitive with chemical vapor deposition or screen printing, the predominant methods by which vertically aligned SWNT films have been fabricated to date.     

Microbiosensors based on DNA modified single-walled carbon nanotube and Pt black nanocomposites

Glucose and ATP biosensors have important applications in diagnostics and research. Biosensors based on conventional materials suffer from low sensitivity and low spatial resolution. Our previous work has shown that combining single-walled carbon nanotubes (SWCNTs) with Pt nanoparticles can significantly enhance the performance of electrochemical biosensors. The immobilization of SWCNTs on biosensors remains challenging due to the aqueous insolubility originating from van der Waals forces. In this study, we used single-stranded DNA (ssDNA) to modify SWCNTs to increase solubility in water. This allowed us to explore new schemes of combining ssDNA-SWCNT and Pt black in aqueous media systems. The result is a nanocomposite with enhanced biosensor performance. The surface morphology, electroactive surface area, and electrocatalytic performance of different fabrication protocols were studied and compared. The ssDNA-SWCNT/Pt black nanocomposite constructed by a layered scheme proved most effective in terms of biosensor activity. The key feature of this protocol is the exploitation of ssDNA-SWCNTs as molecular templates for Pt black electrodeposition. The glucose and ATP microbiosensors fabricated on this platform exhibited high sensitivity (817.3 nA/mM and 45.6 nA/mM, respectively), wide linear range (up to 7 mM and 510 μM), low limit of detection (1 μM and 2 μM) and desirable selectivity. This work is significant to biosensor development because this is the first demonstration of ssDNA-SWCNT/Pt black nanocomposite as a platform for constructing both single-enzyme and multi-enzyme biosensors for physiological applications.     

Sequence-specific self-stitching motif of short single-stranded DNA on a single-walled carbon nanotube

The DNA-single-walled carbon nanotube (SWCNT) hybrid molecule has attracted significant attention recently for its ability to disperse and sort SWCNTs according to their chirality. Key for utilizing their unique properties is an understanding of the structure of DNA adsorbed on the SWCNT surface, which we study here using molecular simulations. Using replica exchange molecular dynamics (REMD), we explore equilibrium structures formed by single strands of 12-mer oligonucleotides, of varying sequence, adsorbed on a (6,5)-SWCNT. We find a consistent motif in which the DNA strand forms a right-handed helical wrap around the SWCNT, stabilized by "stitches" (hydrogen bonding between distant bases) to itself. Variability among equilibrium populations of DNA self-stitched structures was observed and shown to be directly influenced by DNA sequence and composition. Competition between conformational entropy and hydrogen bonding between bases is predicted to be responsible for the formation of random versus stitched configurations.     

Covalent immobilization of oligonucleotides on p-aminophenyl-modified carbon screen-printed electrodes for viral DNA sensing

DNA-sensing platforms were prepared by covalently attaching oligonucleotide capture probes onto p-aminophenyl-functionalized carbon surfaces and applied to the determination of an amplified herpes virus DNA sequence in an electrochemical hybridization assay.     

Controlled growth of single-walled carbon nanotubes on patterned substrates

Single-walled carbon nanotubes (SWCNTs) have attracted great interest in the last two decades because of their unique electrical, optical, thermal, mechanical properties, etc. One major research field of SWCNTs is the controlled growth of them from the patterned catalysts on substrates, since the integration of SWCNTs into nanoelectronics and other devices requires well-organized SWCNT arrays. This tutorial review describes the commonly used lithographic techniques to pattern catalysts used for controlled growth of SWCNTs, specifically confined to the horizontal direction. Advantages and disadvantages of each method will be briefly discussed. Applications of the SWCNT arrays grown from the catalyst patterns will also be introduced.     

Fabrication and characterization of thin films of single-walled carbon nanotube bundles on flexible plastic substrates

A convenient method to obtain patterns of films of single-walled carbon nanotubes (SWNT) bundles on flexible plastic is described. Using the Line Patterning method SWNT films of thickness ranging from approximately 300-1500 nm can be obtained from aqueous surfactant-supported dispersions of chemically purified SWNT bundles synthesized by the pulsed-laser ablation method. These films are strongly adherent and are competitive in performance with commercially available films of indium-tin-oxide (ITO) on plastics. For example, an approximately 1500 thick film of SWNT on poly(ethylene terephthalate) (PET) shows a surface resisitvity of approximately 80 Omega/sq, optical transparency >80%, and robust flexibility. Unlike ITO/PET, films of SWNT/PET can be folded and bent to a crease without cracking. The simple techniques involoved in obtaining these films (i.e., those without requiring lithography or ink-jet printing) could help facilitate the rapid fabrication of transparent, flexible electronic devices, heralding what promises to be a new approach towards the development of next-generation optoelectronic devices.     

Electronic properties of single-walled carbon nanotube networks

We present a study on the electronic behavior of films of as-prepared and purified single-walled carbon nanotubes (SWNTs) and demonstrate the important role that chemical functionalization plays in modifying their electronic properties, which in turn throws further light on the mechanism of action of SWNT-based sensors. Films of electric arc SWNTs were prepared by spraying, and optical spectroscopy was used to measure the effective film thickness. The room-temperature conductivities (sigma(RT)) of thin films deposited from as-prepared and purified SWNTs are in the range sigma(RT) = 250-400 S/cm, and the nonmetallic temperature dependence of the conductivity indicates the presence of tunneling barriers, which dominate the film conductivity. Chemical functionalization of SWNTs with octadecylamine (ODA) and poly(m-aminobenzenesulfonic acid) (PABS) significantly decreases the conductivity; sigma(RT) = 3 and 0.3 S/cm for SWNT-ODA and SWNT-PABS, respectively.     

Creating patterned carbon nanotube catalysts through the microcontact printing of block copolymer micellar thin films

We report a route for synthesizing patterned carbon nanotube (CNT) catalysts through the microcontact printing of iron-loaded poly(styrene-block-acrylic acid) (PS-b-PAA) micellar solutions onto silicon wafers coated with thin aluminum oxide (Al(2)O(3)) layers. The amphiphilic block copolymer, PS-b-PAA, forms spherical micelles in toluene that can form quasi-hexagonal arrays of spherical PAA domains within a PS matrix when deposited onto a substrate. In this report, we dip a poly(dimethylsiloxane) (PDMS) molded stamp into an iron-loaded micellar solution to create a thin film on the PDMS features. The PDMS stamp is then put in contact with a substrate, and uniaxial compressive stress is applied to transfer the micellar thin film from the PDMS stamp onto the substrate in a defined pattern. The polymer is then removed by oxygen plasma etching to leave a patterned iron oxide nanocluster array on the substrate. Using these catalysts, we achieve patterned vertical growth of multiwalled CNTs, where the CNTs maintain the fidelity of the patterned catalyst, forming high-aspect-ratio standing structures.     

Direct fabrication of single-walled carbon nanotube macro-films on flexible substrates

We employed a floating chemical vapor deposition technique and applied a liquid (solution)-free precursor system for the fabrication of single-walled carbon nanotube macro-films on various flexible substrates from metallic foils to polymer films.     

Hydrogen-bonded and physisorbed CO in single-walled carbon nanotube bundles

Fourier transform infrared spectroscopy is used to study CO adsorption in single-walled carbon nanotubes. Evidence for adsorption in endohedral and groove/external surface sites is presented through displacement studies involving both CO and CO2. Blue-shifted CO stretching frequencies also indicate that CO hydrogen bonds to hydroxyl functionalities created on the nanotubes by acid purification steps. N2 surface area measurements are used to further understand the porosity of the nanotube samples and to help explain the spectroscopic results.