Large amplitude response of circular plates on elastic foundations

The von Kármán type partial differential equations governing non-linear dynamic behaviour of circular plates resting on Winkler and Pasternak elastic foundations have been analysed analytically. The space and time-wise integrations have been carried out employing the Chebyshev polynomials and implicit Houbolt techniques, respectively. The influence of foundation parameters K and G on the large amplitude response of circular plates subjected to step function loads has been studied for both the clamped immovable as well as simply supported immovable edge conditions. Foundation parameters K and G have been determined for the minimax central response. For all values of K,values of G should be between 30 and 40 for the clamped circular plates and the value of G should be a maximum for the simply supported circular plates.     

Planar non-linear free vibrations of an elastic cable

Continuum non-linear equations of free motion of a heavy elastic cable about a deformed initial configuration are developed. Referring to an assumed mode technique one ordinary equation for the cable planar motion is obtained via a Galerkin procedure, an approximate solution of which is pursued through a perturbation method. Suitable nondimensional results are presented for the vibrations in the first symmetric mode with different values of the cable properties. Which procedure is the proper one to account consistently for the non-linear kinematical relations of the cable in one ordinary equation of motion is discussed.     

Elastic stability of inhomogeneous thin plates on an elastic foundation

We study the elastic stability of infinite inhomogeneous thin plates on an elastic foundation under in-plane compression. The elastic stiffness constants depend on the coordinate variable in the thickness direction of the plate. The elastic foundation is represented as a Winkler-type model characterized by linear and nonlinear spring constants. First we derive the Föppl–von Kármán equations by taking variations of the elastic strain energy. Next we develop the linear stability analysis of the plate under uniform in-plane compression and explicitly derive the critical loads and wave numbers for particular three cases. The effects of the material inhomogeneity, material orthotropy and loading orthotropy on the critical states are examined independently. Finally, we perform a weakly nonlinear analysis of the plate at the onset of the buckling instability. With the multiple scales method, the amplitude equations for the unstable modes that provide insight into the mode type and its amplitude are derived and then the effect of the material inhomogeneity on buckling modes are evaluated qualitatively.     

Large deflection analysis of plates on elastic foundation by the boundary element method

A boundary element method is developed for the large deflection analysis of thin elastic plates resting on elastic foundation. The subgrade reaction may depend linearly (Winkler-type) or nonlinearly on the deflection as well as on the point coordinates (nonhomogeneous subgrade). Moderately large deflections are examined as described by the von Karman equations. The plate may have arbitrary shape and its boundary may be subjected to any type of boundary condition. The proposed method uses the fundamental solution of the linear plate theory and treats the nonlinearities as well as the subgrade reaction as unknown domain forces. Numerical results are presented to illustrate the method and demonstrate its effectiveness and accuracy.     

Finite amplitude, free vibrations of an axisymmetric load supported by a highly elastic tubular shear spring

The finite amplitude, free vibrational characteristics of a simple mechanical system consisting of an axisymmetric rigid body supported by a highly elastic tubular shear spring subjected to axial, rotational, and coupled shearing motions are studied. Two classes of elastic tube materials are considered: a compressible material whose shear response is constant, and an incompressible material whose shear response is a quadratic function of the total amount of shear. The class of materials with constant shear response includes the incompressible Mooney-Rivlin material and certain compressible Blatz-Ko, Hadamard, and other general kinds of models. For each material class, the quasi-static elasticity problem is solved to determine the telescopic and gyratory shearing deformation functions needed to evaluate the elastic tube restoring force and torque exerted on the body. For all materials with constant shear response, the differential equations of motion are uncoupled equations typical of simple harmonic oscillators. Hence, exact solutions for the forced vibration of the system can be readily obtained; and for this class, engineering design formulae for the load-deflection relations are discussed and compared with experimental results of others'. For the quadratic material, however, the general motion of the body is characterized by a formidable, coupled system of nonlinear equations. The free, coupled shearing motion for which either the axial or the azimuthal shear deformation may be small is governed by a pair of equations of the Duffing and Hill types. On the other hand, the finite amplitude, pure axial and pure rotational motions of the load are described by the classical, nonlinear Duffing equation alone. A variety of problems are solved exactly for these separate free vibrational modes, and a number of physical results are presented throughout.     

Finite amplitude,free vibrations of an axisymmetric load supported by a highly elastic tubular shear spring

The finite amplitude, free vibrational characteristics of a simple mechanical system consisting of an axisymmetric rigid body supported by a highly elastic tubular shear spring subjected to axial, rotational, and coupled shearing motions are studied. Two classes of elastic tube materials are considered: a compressible material whose shear response is constant, and an incompressible material whose shear response is a quadratic function of the total amount of shear. The class of materials with constant shear response includes the incompressible Mooney-Rivlin material and certain compressible Blatz-Ko, Hadamard, and other general kinds of models. For each material class, the quasi-static elasticity problem is solved to determine the telescopic and gyratory shearing deformation functions needed to evaluate the elastic tube restoring force and torque exerted on the body. For all materials with constant shear response, the differential equations of motion are uncoupled equations typical of simple harmonic oscillators. Hence, exact solutions for the forced vibration of the system can be readily obtained; and for this class, engineering design formulae for the load-deflection relations are discussed and compared with experimental results of others'. For the quadratic material, however, the general motion of the body is characterized by a formidable, coupled system of nonlinear equations. The free, coupled shearing motion for which either the axial or the azimuthal shear deformation may be small is governed by a pair of equations of the Duffing and Hill types. On the other hand, the finite amplitude, pure axial and pure rotational motions of the load are described by the classical, nonlinear Duffing equation alone. A variety of problems are solved exactly for these separate free vibrational modes, and a number of physical results are presented throughout.     

Forced vibrations of an elongated cylindrical panel on a unilateral elastic foundation

International Applied Mechanics -     

Closed-form solutions for free vibration of rectangular FGM thin plates resting on elastic foundation

This article presents closed-form solutions for the frequency analysis of rectangular functionally graded material(FGM) thin plates subjected to initially in-plane loads and with an elastic foundation. Based on classical thin plate theory, the governing differential equations are derived using Hamilton's principle. A neutral surface is used to eliminate stretching–bending coupling in FGM plates on the basis of the assumption of constant Poisson's ratio. The resulting governing equation of FGM thin plates has the same form as homogeneous thin plates. The separation-ofvariables method is adopted to obtain solutions for the free vibration problems of rectangular FGM thin plates with separable boundary conditions, including, for example, clamped plates. The obtained normal modes and frequencies are in elegant closed forms, and present formulations and solutions are validated by comparing present results with those in the literature and finite element method results obtained by the authors. A parameter study reveals the effects of the power law index n and aspect ratio a/b on frequencies.     

Resonant effects of local loads on circular sandwich plates on an elastic foundation

The axisymmetric forced vibrations of a circular sandwich plate on an elastic foundation are studied. The plate is subjected to axisymmetric surface and mechanical loads with frequency equal to one of the natural frequencies of the plate. The foundation reaction is described by the Winkler model. To describe the kinematics of an asymmetric sandwich, the hypothesis of broken normal is used. The core is assumed to be light. The analytical solution of the problem is obtained and numerical results are analyzed     

Large amplitude free vibrations of shallow spherical shell and cylindrical shell — A new approach

In this paper, large amplitude free vibrations of thin elastic shallow spherical and cylindrical shells have been investigated following a new approach. Numerical results for movable as well as immovable edge conditions have been presented graphically and compared with other known results.     

The nonlinear vibrations of functionally graded cylindrical shells surrounded by an elastic foundation

This paper reports the result of an investigation on the nonlinear vibrations of functionally graded cylindrical shell surrounded by an elastic foundation, based on Hamilton’s principle, von Kármán nonlinear theory, and the first-order shear deformation theory. Material properties are assumed to be temperature dependent. The surrounding elastic medium is modeled as Winkler foundation model, Pasternak foundation model, and nonlinear foundation model. Galerkin’s method is utilized to convert the governing partial differential equations to nonlinear ordinary differential equations with quadratic and cubic nonlinearities. Considering the primary resonance case, the method of multiple scales is used to study the frequency response of nonlinear vibrations and the softening/hardening behavior. Parametric effects on the nonlinear vibrations are investigated.     

Generalized non-linear free vibrations of prestressed plates and shells

This paper investigates the non-linear free vibration of prestressed plates and shells in a general form. The analysis includes the effects of in-plane inertia. The analysis is based on the non-linear equations of motion and uses a perturbation procedure. No assumption is made a priori for the form of the time or space mode. The boundary conditions are treated in a general manner including boundary conditions where non-linear stress resultants are specified. The method is illustrated by three examples.     

Nonlinear analysis of thick plates on an elastic foundation by HT FE with p-extension capabilities

The paper is concerned with the development of hybrid-Trefftz (HT) p-element for nonlinear analysis of Reissner-Mindlin plates resting on an elastic foundation. The foundation may be of Winkler-type or Pasternak-type. Exact solutions of the Lame-Navier equations are used for the in-plane intraelement displacement field and an incremental form of the basic equations is adopted. With the aid of incremental form of these equations, all nonlinear terms may be taken as pseudo-loads. Moreover, some modifications have been made on the nonlinear boundary equations to simplify the ensuing derivation. As a result, the in-plane and out-of-plane equations are uncoupled, and then the derivation for the HT finite element (FE) formulation becomes very simple. The practical efficiency of the new element model has been assessed through several examples.     

Asymmetric vibrations of an elastic sphere

Historically, the vector Navier equation governing the dynamic response of an elastic, homogeneous, isotropic sphere has been solved using the Helmholtz decomposition of the displacement vector. Further, many of the problems in the literature have been restricted to ones involving axisymmetric geometry. In this presentation, the time-dependent Navier equation is solved using a set of vector spherical harmonics which, previously, has been used primarily in quantum mechanics studies but which seems particularly useful in solving asymmetric problems with nonconservative body forces. Expressions for the displacements, strains, and stresses and a discussion of the vibrations of an elastic sphere are given.Part of the material presented here was developed while the author was on a Developmental Leave at the University of Texas at Austin.     

Parametric vibrations and stability of an axially accelerating string guided by a non-linear elastic foundation

Parametric vibrations and stability of an axially accelerating string guided by a non-linear elastic foundation are studied analytically. The axial speed, as the source of parametric vibrations, is assumed to involve a mean speed, along with small harmonic variations. The method of multiple scales is applied to the governing non-linear equation of motion and then the natural frequencies and mode shape equations of the system are derived using the equation of order one, and satisfying the compatibility conditions. Using the equation of order epsilon, the solvability conditions are obtained for three distinct cases of axial acceleration frequency. For all cases, the stability areas of system are constructed analytically. Finally, some numerical simulations are presented to highlight the effects of system parameters on vibration, natural frequencies, frequency-response curves, stability, and bifurcation points of the system.