光机械式红外探测器中镜面弯曲对探测灵敏度的影响(英文)

光学读出式红外成像技术是近年来研究的热点,本文讨论了镜面弯曲对光学检测灵敏度的影响。由双材料微悬臂梁组成的非致冷焦平面阵列通过体刻蚀工艺加工而成,由于残余应力的影响,制成的焦平面阵列将会发生弯曲,应力导致的镜面弯曲将会降低光学探测灵敏度。本文通过傅立叶光学模拟了镜面弯曲对光学探测灵敏度的影响,并通过实验验证了该模型。实验和模拟结果表明,在镜面曲率为0 .1mm-1时,光学探测灵敏度将会降低到理想情况的40 %。最后我们用这个模型评价了通过表面修饰来提高光学性能的效果。     

光机械式红外探测器中镜面弯曲对探测灵敏度的影响

光学读出式红外成像技术是近年来研究的热点，本文讨论了镜面弯曲对光学检测灵敏度的影响。由双材料微悬臂梁组成的非致冷焦平面阵列通过体刻蚀工艺加工而成，由于残余应力的影响，制成的焦平面阵列将会发生弯曲，应力导致的镜面弯曲将会降低光学探测灵敏度。本文通过傅立叶光学模拟了镜面弯曲对光学探测灵敏度的影响，并通过实验验证了该模型。实验和模拟结果表明，在镜面曲率为0．1mm-1时，光学探测灵敏度将会降低到理想情况的40％。最后我们用这个模型评价了通过表面修饰来提高光学性能的效果。     

Optical interferometry applied to analyze deformation and fracture of aluminum alloys

Deformation and fracture of aluminum alloys are studied using a unique optical technique. This technique is based on a new optical pattern that we recently discovered in a fringe system generated by speckle pattern interferometry. The investigation has revealed that the optical pattern represents a band structured deformation called the mesoband which is substantially related to stress concentration. Described in detail are the Characteristics of this optical pattern; they are explained in connection with the development of plastic deformation and fracture behavior. Several features of this optical pattern are presented that manifest some important mechanical states of the material in the prefracture stage and they can be used to predict the location and timing of a fracture.     

空心金属光纤导引原子和Monte-Carlo模拟

在空心金属光纤,首先计算了TE01模的电磁场分布和光强分布。其次以~(85)Rb原子为例,计算了TE01模和~(85)Rb原子相互作用的光学势。研究表明,TE01模在空心金属光纤中集中分布在空心区,沿光纤截面呈环状分布。最后采用Monte-Carlo方法,分别模拟了原子在直空心金属光纤和弯曲空心金属光纤中的直导引效率和弯曲导引效率,相比直导引方案,弯曲导引方案效率明显偏低。空心金属光纤原子导引不仅可用于原子干涉仪研究,采用环形空心金属光纤的原子导引还可用于角速度测量研究。     

热和机械载荷共同作用下涂层特性对埋入式光纤传感器性能的影响

研究在热载及拉伸共同作用下，光纤传感器涂层的材料特性和厚度变化对光纤－涂层－基体基体性能的影响，分析表明在埋入式光纤附近的应力集中涂层的特性有关。在热应力和机械应力共同作用下，对于给定的基体材料和裸光纤，存在可减少基体，涂层与裸光纤之间或裸光纤中应力集中的涂层性能和尺寸的最优组合。     

Strain-optic law for a certain class of birefringent composites

A strain-optic law for a certain class of birefringent fiber-reinforced composite materials is developed. The strain-optic law requires both mechanical and optical characterization of the material. Previous investigations have hypothesized the existence of three independent optical properties for the anisotropic birefringent material. The strain-optic relation developed in this study, however, requires only a single strain-optic coefficient, coupled with four independent mechanical material properties, for prediction of the optical response of a birefringent anisotropic material. Experimental results are presented which show good agreement with the developed strain-optic relation. Finally, the isoclinic parameter is investigated and preliminary evidence is presented which indicates a correspondence between principal-strain direction and optical isoclinic angle.     

空心光纤网络埋入复合材料中性能影响的研究

空心光纤网络可用来进行复合材料力学性能的监测,同时又可对材料的损伤进行自修复。空心光纤网络与复合材料性能的影响主要有三方面：1）复合材料对空心光纤的影响;2）空心光纤对复合材料的影响;3）空心光纤与复合材料力学性能的匹配。本文测试了三种规格的空心光纤埋入复合材料中受到的影响,依据国家有关的复合材料测试标准,对树脂基复合材料埋与不埋大直径空心光纤进行了对比实验,并论证了光纤与材料力学性能匹配点存在的必然性。从而为空心光纤网络用于复合材料的自诊断与自修复提供了研究的依据。     

光通量法在SHPSB剪切应变测量中的应用

利用光通量方法对分离式霍普金森压剪杆实验技术中的剪切应变测量进行了实验研究。实验装 置主要包括:准直激光器、光电接收器、光学挡板。由装置性能验证实验结果以及不确定度分析结果表明:利 用基于光通量法的剪切应变测量技术能够可靠地测量SHPSB(splitHopkinsonpressurebar)试样的剪切应 变。并对比了基于光通量法测量的剪切应变值与理论近似结果,结果显示前者小于后者,分析并讨论了原因。     

A moiré microscope for finite deformation micro-mechanical studies

A new version of a moiré microscope is presented that embodies the theory of optical moiré interferometry. To interrogate the deformed specimen grating, the device uses a transmission diffraction grating that allows for a simple and quick change of the virtual reference grating vector without disturbing the optical alignment of the other components in the optical train. To analyze deformation from the acquired moiré interference fringe patterns, the displacement light-itensity moiré optical law introduced by Sciammarella is revisited. The analysis of deformation is consistent with the continuum principles of finite deformation and can readily be used to obtain micro-mechanical quantities of interest such as the local strains, stretches and rotations.     

Calibration of an optical tweezer microrheometer by sequential impulse response

We report a robust method for calibrating optical tweezers in any viscoelastic medium. This approach uses two coupled measurements—one from a static experiment in which a trapped particle diffuses passively within the tweezer’s harmonic potential and another from a dynamic experiment in which the trap is jumped discontinuously to a new position while the particle undergoes transient relaxation back into the minimum of the optical potential. Together, these are sufficient to determine the stiffness of the trap in a material of unknown rheology. The method is tested in a Newtonian fluid and compares favorably with other means of calibration. The calibration is also performed in a non-Newtonian fluid of which standard optical tweezer calibration methods may struggle to characterize. The correctly calibrated optical tweezer microrheometer measures the rheology of polymer solutions in agreement with macrorheological measurements.     

绞合式光纤应变传感器

研究了一种可用于工程结构状态监测的本征型强度调制光纤应变传感器,由两根以上多模光纤相互绞合形成,分析了该传感器的应变传感原理,得到其既能测量拉应变,又有测定压应变的结论,传感器对应变的响应具有良好的线性和重复性、灵敏度高、无迟滞现象,对钢筋拉应变、混凝土压就矿业的实验结果与理论分析一致,表明该传感器是适合土木工程测量、结构状态监测等方面的较为理想的光纤传感器。     

Optical guidelines and signal quality for LDA applications in circular pipes

The optical performance of laser Doppler anemometer (LDA) technology in applications to circular pipes with an external plane wall has been clarified and quantified. It is shown that optical aberration is a persistent feature in such LDA measurements and measurements from each direction along a full pipe diameter are needed to obtain the flow distribution. For measurements of axial velocities in a circular pipe no special care has to be taken, even if the optical plane deviates from the pipe axis. For measurements of tangential and radial velocities detailed operating guidelines have been presented with respect to the shift of the measurement volume, its optical properties and the beam waist dislocations. The analysis reveals the possible influences on both the signal quality and the measurement accuracy.     

Amplification,reshaping, fission and annihilation of optical solitons in dispersion-decreasing fiber

Amplification, reshaping, fission and annihilation of optical solitons can be applied in fiber lasers, all-optical switching devices and optical communications. In this paper, for the variable coefficient high-order nonlinear Schrödinger equation, analytic two- and three-soliton solutions are derived by the Hirota bilinear method. Optical solitons propagation in the dispersion-decreasing fibers is investigated theoretically. The influence of corresponding parameters is discussed based on obtained solutions. By choosing properly parameters, optical solitons are amplified and reshaped stably in a long distance. Besides, the number of amplified solitons can be chosen as required. Moreover, a novel phenomenon that three solitons can split into four solitons or merge into two solitons has been proposed. Results may be helpful to realize the amplification, reshaping, fission and annihilation of solitons, and will be valuable to the applications of optical amplifier, all-optical switching and optical self-routing.     

基于光流算法的粒子图像测速技术研究和验证

光流测量技术作为一种新的空气动力学实验技术,以其像素级分辨率的矢量场测量优势获得广泛的应用。光流测量技术使用光流约束方程,配合平滑限定条件,可以进行速度场测量,获得高分辨率的全局矢量场。本文首先通过研究积分最小化光流测速理论和算法,采用C++编写光流速度测量程序;然后通过三种典型的人工位移图像对光流计算程序进行了验证,并将结果和标准位移分布进行比对分析,以指导如何在实际应用中获得高精度光流速度场;最后进行小型风洞后向台阶实验,利用高速相机拍摄示踪粒子图像,使用光流计算程序获得速度矢量场,同采用互相关算法的粒子图像测速计算结果相比较,体现出光流计算方法像素级分辨率的矢量场测量优势。     

A numerical simulation of combined radiation and natural convection heat transfer in a square enclosure heated by a centric circular cylinder

A numerical simulation of combined natural convection and radiation in a square enclosure heated by a centric circular cylinder and filled with absorbing-emitting medium is presented. The ideal gas law and the discrete ordinates method are used to model the density changes due to temperature differences and the radiation heat transfer correspondingly. The influence of Rayleigh number, optical thickness and temperature difference on flow and temperature fields along with the natural convection, radiation and total Nusselt number at the source surfaces is studied. The results reveal that the radiation heat transfer as well as the optical thickness of the fluid has a distinct effect on the fluid flow phenomena, especially at high Rayleigh number. The heat transfer and so the Nusselt number decreases with increase in optical thickness, while increases greatly with increase in temperature difference. The variation in radiation heat transfer with optical thickness and temperature difference is much more obvious as comparison with convection heat transfer.     

The fully digital evaluation of photographic PIV recordings

The performance of a purely digital evaluation system for photographic PIV recordings is described. High resolution digital images are obtained from the 35 mm negatives using a commonly available slide scanner. Together with the continually improving capabilities of standard computers, this evaluation system is a cost effective alternative to the traditional analog optical/digital (Young's fringe method) and purely optical PIV interrogation systems. Compared to the optical systems the fully digital evaluation can provide a higher spatial resolution while maintaining a similar measurement uncertainty. Using actual PIV recordings absolute measurement uncertainties are obtained and further predictions toward optimal displacement data recovery are made with the aid of Monte-Carlo simulations. Measurement uncertainties are minimized for particle image diameters on the order of 2 pixels while the reduction of the image depth (i.e. bits/pixel) has little effect. The overall performance of the described digital evaluation is compared to two types of optical evaluation systems.Affiliated with DNW-NWB, DLR-Braunschweig.     

Development of a portable laser sheet

A portable laser sheet illumination source for flow visualization experiments has been developed utilizing fiber optic cable and standard optical bench components. This technique improves the convenience and safety aspects of using laser light by containing the concentrated laser energy inside a flexible and shielded fiber cable. Transmission efficiencies up to seventy-five percent have been obtained with a twenty meter long fiber cable and careful alignment of optical components. The current optical configuration can transmit a two-watt Argon-ion laser beam and produce a sheet one-half by one meter in size and approximately two to three millimeters in thickness.     

光学随动系统机械分系统的精度分析

—光学成像制导仿真系统机械部分由三轴仿真转台和光学随动系统（两轴台）组成，是检测导弹导引头制导精度的重要地面设备。用两轴台形式实现的光学随动系统在国内还是首次研制。本文介绍了光学随动系统机械分系统的总体布局，分析了机械分系统可能达到的静态位置精度、动态精度和结构固有频率     

Development of a double-beam rheo-optical analyzer for full tensor measurement of optical anisotropy in complex fluid flow

The design and testing of the Double-Beam Rheo-Optical Analyzers, DB-ROA is described. The DB-ROA contains the two optically modulated laser beams that are transmitted through a sheared sample in different angles. The full components of the stress tensor can be evaluated simultaneously by a single measurement of the birefringence and orientation angle of each beam. The mechanical properties are also measured simultaneously with the optical properties. This system can be applied to both steady and transient shear flows. Three types of DB-ROAs are designed. They are distinguished by the optical modulation system, that is (1) a single modulator system, (2) a synchronization of two modulators, and (3) a two individual modulator system. The performance tests were carried out and its validity was demonstrated by comparison between the optical and the mechanical measurements of the first normal stress difference. The signal-to-noise ratio was strongly affected by the choice of the oblique angle of the second beam. The design features for the different optical modulation systems are discussed.     

A simplified optical method for measuring residual stress by rapid cooling in thermosetting resin strip

This paper presents a simplified optical method for measuring the residual stresses by rapid cooling in thermosetting resin strips. First, the fundamental equations for calculating the residual stress from the residual birefringence were obtained by the linear photoviscoelastic theory. The specimens were then subjected to rapid cooling. After rapid cooling, the residual stress was measured by two methods, the simplified optical method mentioned above and the well-known layer-removal method. The effectiveness of the simplified optical method was discussed by comparing results of the two methods.