用无网格LRPIM分析中厚板弯曲问题

用径向基函数构造无网格点插值法的形函数,插值函数具有Kronecker delta函数性质,因此可以很方便地施加本质边界条件.利用无网格局部径向点插值方法分别对一个对边固支另对边简支中厚板和一个悬臂中厚板的弯曲进行了分析计算.该方法不需要任何形式的网格划分,所有的积分都在规则形状的子域及其边界上进行,是一种真正的无网格方法.算例表明:将无网格局部径向点插值法应用于计算中厚板的弯曲问题,所求得的位移场和应力场都是光滑的;在径向基函数的基础上,附加多项式大大提高了插值精度;所得结果与弹性力学理论解以及有限元解都十分吻合.     

用无网格局部径向点插值法分析非均质中厚板的弯曲问题

用无网格局部径向点插值法分析了非均质中厚板的弯曲问题.利用虚位移原理推导了中厚板的离散系统方程.采用径向基函数耦合多项式基函数来近似试函数,用四次样条函数作为加权残值公式中的权函数.所构造成的形函数具有Kronecker delta性质,可以很方便地施加本质边界条件.此方法不需要任何形式的网格划分,所有的积分都在规则形状的子域及其边界上进行,是一种真正的无网格方法.在计算过程中,取积分中的高斯点的材料参数来模拟问题域材料特性的变化.算例结果表明这种无网格方法具有效率高、精度高和易于实现等优点.     

壳结构的无网格局部Petrov-Galerkin方法

无网格近似函数具有高度光滑性,能够很好的逼近曲壳表面及其位移场。无网格局部Petrov-Galerkin方法不论插值还是离散都不需要单元,是一种真正的无网格方法。本文基于无网格局部Petrov-Galerkin方法的基本原理,采用移动最小二乘插值,利用控制微分方程弱形式,建立了Mindlin壳结构的无网格局部Petrov-Galerkin分析方法,用屋顶壳、受夹圆柱壳、几何非线性圆柱壳作为计算实例分析了求解精度、收敛性和稳定性,并与精确解和有限元计算结果进行了对比,表明该方法计算精度高及收敛性好。     

非均质中厚板的无网格LRPIM动力学分析

用局部加权残值法建立了非均质中厚板的局部径向点插值离散系统方程,采用无网格局部径向点插值法分析了非均质中厚板的自由振动和强迫振动问题。用径向基函数耦合多项式基函数来近似试函数,用四次样条函数做为加权残值法中的权函数。所构造的形函数具有Kronecker delta性质,可以很方便地施加本质边界条件。该方法不需要任何形式的网格划分,所有的积分都在规则形状的子域及其边界上进行。在计算过程中,取积分中的高斯点的材料参数来模拟问题域材料特性的变化。计算结果表明,利用该方法计算非均质中厚板的自由振动和强迫振动问题可以得到具有较高精度的解。     

无网格局部Petrov-Galerkin法求解板壳弹塑性大变形

无网格局部Petrov-Galerkin法构造的高阶光滑的形函数非常适合建立板壳结构场函数的逼近函数,是一种比较理想的研究板壳问题的方法。基于Mindlin板壳理论,采用更新拉格朗日原理和大变形条件下场量的无网格表达形式,实现了率型无网格局部Petrov-Galerkin方法对板壳弹塑性大变形的求解,算例分析表明了方法的有效性和较高的分析精度。     

无网格局部Petrov-Galerkin方法的并行计算研究

研究了无网格局部Petrov-Galerkin方法MLPG(Meshless Local Petrov-Galerkin Method)的并行算法与并行实现过程。将MLPG方法推广到弹性动力学问题,研究了MLPG方法中节点搜索、积分点搜索、数值积分及方程组求解等过程的并行算法,并给出了MLPG方法并行计算的具体实现过程。两个数值算例验证了MLPG并行算法的有效性;计算结果表明,MLPG方法的并行计算具有很好的并行性能和可扩展性。     

弹性静力问题的无网格弱-强形式结合法

基于改进的移动最小二乘(MLS)二阶导数近似,建立了一种求解弹性静力问题的无网格弱-强形式结合法(MLS-MWS)。该方法采用节点离散求解域,通过MLS构造形函数,将求解域划分为边界域和内部域,并分别使用控制方程的局部弱形式和强形式来建立离散系统方程。对强形式中涉及的近似函数二阶导数计算,提出了一种将其转化为求两次一阶导数的方法,与传统方法相比,该方法计算简单、精度高。MLS-MWS法结合了弱、强形式无网格法的优点,Neumann边界条件容易满足,并且只需在边界区域进行积分。文中应用该方法分析了两个弹性力学平面问题,分析结果表明本文方法具有良好的精度和收敛性。     

基于无网格局部Petrov-Galerkin(MLPG)法求解任意磁场方向下的定常MHD流动

磁流体流动在现代工业和科研中有着广泛的应用,但磁流体的流动受到磁场的影响,与一般流体区别较大,需要对其进行深入的研究。磁流体的流动受到流体力学流动方程和麦克斯韦方程的共同影响,其精确解在有限条件下才能得到,因此对磁流体的流动进行数值模拟具有重要的意义。本文采用移动最小二乘法计算形函数,利用无网格局部Petrov-Galerkin(MLPG)法得到控制方程的离散形式,在管壁为任意电导率及任意方向外加磁场的条件下,对方形直管道中定常流动的磁流体进行了数值计算。MLPG法的计算是基于节点的,不需要任何网格或单元,是一种真正的无网格方法。计算结果与Scheriff精确解进行了比较,表明该方法适用于中等以下哈特曼数的磁流体流动计算。     

板壳畸变单元的无网格和有限元自动耦合方法

板壳大变形时单元的严重畸变会使计算精度降低。无网格局部Petrov-Galerkin法是一种真正的无网格方法,能够消除网格畸变,但比有限元法计算效率低。根据板壳网格畸变的局部性特点,利用过渡单元法,基于板壳网格质量,建立了板壳的网格严重畸变区域由有限元分析切换为无网格分析的自动耦合算法,实现了有限元法和无网格局部彼得罗夫．迦辽金法的耦合。应用实例表明：通过自适应耦合,既能发挥有限元法计算效率高的特点,又能发挥无网格法适合大变形分析、没有网格畸变造成计算困难的特点。     

基于核重构思想的配点型无网格方法的研究--一维问题

无网格方法按其离散原理可分为Galerkin型、配点型等。其中Galerkin型无网格方法的实施需要背景网格,不属于真正的无网格法;配点型无网格方法的实施不需要背景网格,是真正的无网格法。本文首先介绍了重构核点法的基本原理,然后基于核重构思想,与配点法相结合,以一维问题为例,研究了配点型无网格方法,对该方法构造过程中的近似函数及其导数的计算、修正函数的计算及方法的实现等问题进行了探讨。并结合若干典型算例,检验了其计算精度与收敛姓。     

Meshfree weak–strong (MWS) form method and its application to incompressible flow problems

A meshfree weak–strong (MWS) form method has been proposed by the authors' group for linear solid mechanics problems based on a combined weak and strong form of governing equations. This paper formulates the MWS method for the incompressible Navier–Stokes equations that is non‐linear in nature. In this method, the meshfree collocation method based on strong form equations is applied to the interior nodes and the nodes on the essential boundaries; the local Petrov–Galerkin weak form is applied only to the nodes on the natural boundaries of the problem domain. The MWS method is then applied to simulate the steady problem of natural convection in an enclosed domain and the unsteady problem of viscous flow around a circular cylinder using both regular and irregular nodal distributions. The simulation results are validated by comparing with those of other numerical methods as well as experimental data. It is demonstrated that the MWS method has very good efficiency and accuracy for fluid flow problems. It works perfectly well for irregular nodes using only local quadrature cells for nodes on the natural boundary, which can be generated without any difficulty. Copyright © 2004 John Wiley & Sons, Ltd.     

Reciprocal theorem method for solving the problems of bending of thick rectangular plates

ＲＥＣＩＰＲＯＣＡＬＴＨＥＯＲＥＭＭＥＴＨＯＤＦＯＲＳＯＬＶＩＮＧＴＨＥＰＲＯＢＬＥＭＳＯＦＢＥＮＤＩＮＧＯＦＴＨＩＣＫＲＥＣＴＡＮＧＵＬＡＲＰＬＡＴＥＳＦｕＢａｏ－ｌｉａｎ（付宝连）Ｔａｎｗｅｎ－ｆｅｎｇ（谭文锋）（ＹａｎｓｈａｎＵｎｉｒｅｒｓｉｔ...     

Boundary element method for moderately thick shallow spherical shell bending

This paper is concerned with the direct boundary integral approach to isotropic spherical shell model with the transverse shear deformability taken into account. The validity of the formulation has been proved by example results including comparison with analytical solutions and classical thin shell theory.project supported by State Natural Science Foundation.     

中厚板统计分析的随机边界元法

本文建立了分析含随机材料参数并具厚度不均匀性的中厚板问题的随机边界元法,基于Taylor级数展开技术,分析和到广义位移的均值和一阶偏差的积分方程,其中将材料参数的随机性和厚度的不均匀性作为等效荷载处理,从而得到广义边界位移或面力的均值和协方差,并进一步求出部点广义位移和内力的均值和协方差,最后用本文方法计算了两个数例,并对所得结果进行了分析,探讨。     

Thermal postbuckling analysis of moderately thick plates

A thermal postbuckling analysis is presented for a moderately thick rectangular plate subjected to (1) uniform and non-uniform tent-like temperature loading; and (2) combined axial compression and uniform temperature loading. The initial geometrical imperfection of plate is taken into account. The formulations are based on the Reissner-Mindlin plate theory considering the effects of rotary inertia and transverse shear deformation. The analysis uses a deflection-type perturbation technique to determine the thermal buckling loads and postbuckling equilibrium paths. Numerical examples are presented that relate to the performances of perfect and imperfect, moderately thick rectangular plates and are compared with the results predicted by the thin plate theory.     

Buckling and postbuckling of moderately thick plates

This paper gives the basic differential equations for finite deflections of elastic plates according to Reissner’s approximate stress distributions. The buckling and postbuckling problems of elastic rectangular plates, including the effect of transverse shear deformation, are solved and discussed, by using perturbation method suggested in ref. [8]. The postbuckling equilibrium paths of perfect and imperfect moderately thick rectangular plates are presented and compared with the results based on thin plate theory.     

Postbuckling behavior of rectangular moderately thick plates and sandwich plates

ＰＯＳＴＢＵＣＫＬＩＮＧＢＥＨＡＶｉＯＲＯＦＲＥＣＴＡＮＧＵＬＡＲＭＯＤＥＲＡＴＥＬＹＴＨＩＣＫＰＬＡＴＥＳＡＮＤＳＡＮＤＷＩＣＨＰＬＡＴＥＳＣｈｅｎｇＺｈｅｎ－ｑｉａｎｇ（成振强）ＷａｎｇＸｉｕ－ｘｉ（王秀喜）ＨｕａｎｇＭａｏ－ｇｕａｎｇ（黄茂光）...     

求解不连续中厚板自由振动的微分容积单元法

基于区域叠加原理和微分容积法,发展了一种新型的数值方法——微分容积单元法,用以分析具有不连续几何特征的中厚板的自由振动。根据板的不连续情况将其划分为若干单元,在每个单元内用微分容积法将控制微分方程离散成为一组线性代数方程．在相邻的单元连接处应用位移连续条件和平衡条件,引入边界约束条件后得到一套关于各配点位移的齐次线性代数方程,由此可导出求解系统固有频率的特征方程。本文用子空间迭代法求解特征方程,并以开孔板、混合边界条件板和突变厚度板为例研究了方法的收敛性和计算精度。     

Analytical solution for bending problem of moderately thick composite annular sector plates with general boundary conditions and loadings using multi-term extended Kantorovich method

An analytical solution for bending of composite sector plates is presented using multi-term extended Kantorovich method (MTEKM). The governing equations are derived using the displacement field of the first-order shear deformation theory and converted into two sets of coupled ordinary differential equations (ODEs) utilizing MTEKM. Next, an analytical iterative procedure is presented for solving the derived sets of ODEs based on state-space method. Numerous examples are studied by the present method, and as special cases, solid sector and rectangular plates are also investigated. Next, the results obtained by the present method are compared to those of finite element method and other results available in the literature. It is found that the present method has a high convergence rate as well as good accuracy in all cases.