New green fluorescent polymer sensors for metal cations and protons

A new 4-(N-methylpiperazine)-N-allyl-1,8-naphthalimide with intense yellow-green fluorescence has been synthesized. Then it has been copolymerized with styrene and methylmetacrylate. The photophysical characteristics of the fluorescent dye and its copolymers (poly(St-co-NI) and poly(MAA-co-NI)) have been determined viewing their sensor properties for protons and transition metal cations (Cu²⁺, Fe³⁺ and Zn²⁺). Fluorescence enhancement is the photophysical response of the 4-(N-methylpiperazine)-N-allyl-1,8-naphthalimide to the presence of metal cations and protons, while fluorescence quenching is observed for both copolymers.     

A novel blue fluorescent chemosensor for metal cations and protons,based on 1,8‐naphthalimide and its copolymer with styrene

A new blue emitting 2‐allyl‐6‐(2‐dimethylaminoethyloxy)‐benzo[de]isoquinoline‐1,3‐dione, bearing an allylic group has been designed and synthesized. Bulk radical copolymerization has been carried out in order to prepare a fluorescent copolymer, based on styrene. The main photophysical characteristics of the monomeric and polymeric fluorophores have been investigated both in the absence and presence of metal cations and protons. It has been found that the monomeric naphthalimide can be used as a sensor for protons and Zn²⁺, Ni²⁺, Ce³⁺, Cu²⁺, Co²⁺, Ag⁺ cations. The polymeric fluorophore has been shown to be a selective chemosensor for Cu²⁺ cations. Copyright © 2006 John Wiley & Sons, Ltd.     

Quantitative determination of inorganic minor cations in sodium-, calcium-, magnesium-matrix simulated samples by capillary electrophoresis

The analysis of ammonium, alkali and alkaline-earth trace cations (0.5 ppm) in samples with a calcium, sodium or magnesium matrix (500 ppm) has been achieved using 10 mM imidazole (pH 4.5) electrolyte to which a complexing agent (15-crown-5, oxalic acid or dipicolinic acid) has been specifically added in order to decrease the electrophoretic mobility of the matrix cation and thus to allow the separation of higher mobility cations at sub-ppm concentrations. The influence of several experimental parameters (complexing agent concentration, buffer pH and temperature) have been studied in order to optimize the separation. The complexing agent concentration appears to be the main parameter governing the selectivity of the cations during the analysis of matrix samples. In optimized conditions, we have checked that the separation between minor inorganic cations is not significantly altered by an increase in the matrix cation concentration. As the concentration of the matrix cation increases, the migration times of minor cations remain unchanged even for a 1000 ppm concentration of the matrix cation. Finally, these optimized buffers allow the quantitation of minor cations down to 0.05% (w/w) for calcium- or magnesium- matrix simulated samples and 0.2% (w/w) for sodium-matrix simulated samples.     

Studying the photophysical properties of a polymerizable 1,8‐naphthalimide dye and its copolymer with styrene as potential fluorescent sensors for metal cations

The photophysical characteristics of a polymerizable 1,8‐naphthalimide dye and its copolymer with styrene have been investigated. The functional properties of both low and high molecular weight fluorophores in the presence of different metal cations have been discussed with regard to their potential application as fluorosensors for the metal cations and protons. In acetonitrile solution the monomeric 1,8‐naphthalimide enhances its fluorescence emission in the presence of metal cations (Zn²⁺, Fe³⁺, Co²⁺, Pb²⁺, Cu²⁺, Ni²⁺, and Mn²⁺). In aqueous media the poly(St‐co‐MD) exhibits a selective response to Fe³⁺ cations. The monomeric and polymeric fluorophores also exhibit a considerable increase in their fluorescence intensity at acidic pH values (pH < 6) which suggest that they could be used as ON–OFF probes in analytical devices for signaling the presence of protons. Copyright © 2008 John Wiley & Sons, Ltd.     

Nucleogenic silylium cations and their analogs

Radiochemical studies of nucleogenic trivalent cations of the 14th group elements (silicon and germanium) generated by the β-decay of tritium atoms incorporated into organometallic molecules are reviewed. The radiochromatographic analysis of the neutral labeled products of reactions of these cations with various nucleophiles combined with quantum chemical data allowed us to obtain new information about the reactivity and rearrangements of silylium and germylium cations.     

Synthesis, characterization, and complexation of tetraarylborates with aromatic cations and their use in chemical sensors

Five aromatic borate anions, namely tetrakis(4-phenoxyphenyl)borate (1), tetrakis(biphenyl)borate (2), tetrakis(2-naphthyl)borate (3), tetrakis(4-phenylphenol)borate (4), and tetrakis(4-phenoxy)borate (5), have been prepared and tested as ion-recognition sites in chemical sensors for certain aromatic cations and metal ions. To gain further insight into the complexation of the cations, some complexes have been prepared and structurally characterized. The complexation behavior of 1 and 2 towards N-methylpyridinium (6), 1-ethyl-4-(methoxycarbonyl)pyridinium (7), tropylium (8), imidazolium (9), and 1-methylimidazolium (10) cations has been studied, and the stability constants of the complexes of 1 with cations 6 and 8 have been measured to compare them with the values for the previously studied complexes of tetraphenylborate. The structures of the borate anions and their complexes have been characterized by NMR and mass spectrometric methods. X-ray crystal structures have been determined for potassium tetrakis(4-phenoxyphenyl)borate (K(+)1), N-methylpyridinium tetrakis(4-phenoxyphenyl)borate (61), 1-ethyl-4-(methoxycarbonyl)pyridinium tetrakis(4-phenoxyphenyl)borate (71), tropylium tetrakis(4-phenoxyphenyl)borate (81), and imidazolium tetrakis(biphenyl)borate (92). The results show that borate derivatives are potential candidates for a completely new family of charged carriers for use in cation-selective electrodes.     

Synthesis, structures, and stability of N-donor-stabilized N-silylphosphoranimine cations

A series of DMAP-stabilized (DMAP=4-dimethylaminopyridine) N-silylphosphoranimine cations [DMAPPR(2)==NSiMe(3)](+), bearing R=Cl ([8](+)), Me ([10 a](+)), Me/Ph ([10 b](+)), Ph ([10 c](+)), and OCH(2)CF(3) ([10 d](+)) substituents, have been synthesized from the reactions of the parent phosphoranimines Cl(3)P==NSiMe(3) (3) and XR(2)P==NSiMe(3) (X=Cl (9), Br (11); R=Me (9 a and 11 a), Me/Ph (9 b and 11 b), Ph (9 c and 11 c), and OCH(2)CF(3) (9 d and 11 d)) with DMAP and silver salts as halide abstractors. Reactions in the absence of silver salts yield the corresponding cations, with halide counterions. The stability of the salts is highly dependent on the phosphoranimine substituent and the nature of the counteranion, such that electron-withdrawing substituents and non-coordinating anions yield the most stable salts. X-ray structural determination of the cations reveal extremely short phosphoranimine P--N bond lengths for the cations [8](+) and [10 d](+) (1.47-1.49 A) in which electron-withdrawing substituents are present and a longer phosphoranimine P--N length for the cation [10 a](+) (1.53 A) in which electron-donating substituents are present. Very wide bond angles at nitrogen are observed for the salts containing the cation [10 d](+) (158-166 degrees ) and indicate significant sp hybridization at the nitrogen centre.     

Electronic structure,geometry, and stability of organic cations,dications, and donor-acceptor complexes

Geometric, electronic, and energy characteristics of the complexes formed in the CF₄ ·nAIF₃ (n = I or 2) and CBr₄ ·nAIBr₃ (n = 1, 2, or 4) systems have been determined by the semiempirical AM I method. Besides the donor-acceptor complexes, the CBr₃ ⁺...AIBr₄ ^–, CBr₃ ⁺...Al₂Br₇ ^–, CBr2²⁺...(AlBr₄ ^–)₂, and CBr₂ ²⁺...(Al₂Br₇ ^–)₂ ionic complexes can be formed in the CBr₄ ·nAlBr₃ systems. In the cations and dications of polyhalomethanes (when Hal = Cl, Br, or l) in both the free and bound (included in ionic complexes) states, carbon atoms carry negative charges, the C-Hal bonds are substantially shortened, and the positive charges are located on one-coordinate halogen atoms. These cations and dications can be considered as halenium ions that differ from halenium salts with dicoordinate halogen atoms. In the cationic and dicationic complexes of the CBr₄ ·nAlBr₃ systems, the maximum positive charges on the Br atoms are 0.39 and 0.94, respectively. Fluorine-containing cations and dications have structures similar to those of carbenium ions, whereas in the CF₄ ·nAIF₃ systems (n = l or 2), only donor-acceptor complexes are formed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya. No. 3, pp. 554–560, March, 1996.     

(4+3) cycloaddition reactions of nitrogen-stabilized oxyallyl cations

The use of heteroatom-substituted oxyallyl cations in (4+3) cycloadditions has had a tremendous impact on the development of cycloaddition chemistry. Extensive efforts have been exerted toward investigating the effect of oxygen, sulfur, and halogen substituents on the reactivity of oxyallyl cations. Most recently, the use of nitrogen-stabilized oxyallyl cations has gained prominence in the area of (4+3) cycloadditions. The following article will provide an overview of this concept utilizing nitrogen-stabilized oxyallyl cations.     

Retention behavior of alkali, alkaline earth and transition metal cations in ion chromatography with an unmodified silica gel column

An unmodified silica gel (Develosil 30-5) column (150×4.6 mm I.D.) has been applied to the ion chromatographic separation of alkali, alkaline earth and transition metal cations. The retention behavior of the above cations on the bare substrate was investigated using a number of weak inorganic and organic acid eluents. During this investigation, several separations were achieved and the most suitable eluent conditions were identified. It was concluded that: (a) 1.5 mM HNO₃-0.5mM pyridine-2,6-dicar☐ylic acid eluent was the most effective for the simultaneous separation of common alkali and alkaline earth metal cations, (b) 1.5 mM oxalic acid eluent resulted in the best separation of alkali, alkaline earth, and transition metal cations, (c) 0.5 mM CuSO₄ eluent could be used for the separation of alkali metal cations alone and (d) 0.5 mM ethylenediamine-oxalic acid eluent at pH 5.5 resulted in themost efficient separation of both alkaline earth and transition metal cations.     

A novel fluorescent sensor for metal cations and protons based of bis-1,8-naphthalimide

A newly synthesized bis-1,8-naphthalimide aimed to increase its fluorescence intensity in the presence of protons or metal cations has been investigated. Its spectral photophysical characteristics in acetonitrile and chloroform solutions are described. The influence of metal cations (Zn(2+), Ni(2+), Ce(3+), Co(2+), Cu(2+) and Ag(+)) and protons on the fluorescence intensity has been investigate with regard to obtain fluorescence sensors for this ions in the environment.     

Reactivity of ferrocenium cations with molecular oxygen in polar organic solvents: Decomposition, redox reactions and stabilization

The behaviour of chemically or electrochemically generated ferrocenium cations has been studied in some polar organic solvents (DMF, DMSO, acetonitrile, acetone, methylene chloride) under molecular oxygen. Adducts between oxygen and ferrocenium species can differently evolve according to the solvent (oxidizable or not) and the absence or the presence of another reagent. A rapid decomposition of ferrocenium cations is observed in the absence of another substrate. In the presence of some substrates and antioxidants, the stability of ferrocenium cations towards molecular oxygen notably increases and in some cases redox reactions take place with formation of ferrocene.     

Removal and regeneration of aqueous divalent cations by boehmite

Boehmite (Al(OH)O) was employed for the removal of aqueous Mg(2+), Cu(2+), Cd(2+), Pb(2+), and Co(2+) at 298 K. Although boehmite was able to remove these divalent cations, the greater removal rate with boehmite of Pb(2+) (28.7%) than with Mg(2+), Cu(2+), Cd(2+), and Co(2+) (5.6, 25.3, 10.9, and 13.3%, respectively) was observed under acidic conditions. Under stronger alkaline conditions, in which the lead species was completely dissolved, a greater removal rate of Pb(2+) (more than 80%) was observed under the corresponding conditions employed for the acidic conditions. The removed lead species could not be dissolved from boehmite in an acidic solution while an evident dissolution of lead species was detected using an aqueous NaOH solution. The results shown in the present study reveal that boehmite can be employed as a reagent for the removal and regeneration of aqueous metal cations.     

Structure and charge distribution of some alkynoyl cations

We have performedab initio calculations to determine the structure and charge distribution of some alkynoyl cations and their parent alkynoyl fluorides. We have used Mulliken population analysis and a new technique developed by Yáñez, Stewart and Pople. Our results indicate that the mesomeric form O⁺C–CC–R is one of the most important contributors to the structure of these cations, in agreement with experimental conclusions. We have also found that the participation of mesomeric form O=C=C=C⁺ -R is not negligible and increases with -substitution. In the 3-phenylpropynoyl cation substantial delocalization of charge into the phenyl group occurs. Calculations from YSP population analysis are in good agreement with experimental evidence.     

Anodic cyclization reactions: probing the chemistry of N,O-ketene acetal derived radical cations

The chemical reactivity of radical cations derived from N,O-ketene acetals has been examined and compared with the reactivity of radical cations derived from both ketene dithioacetals and enol ethers. Synthetically, the N,O-ketene acetal radical cations lead to more efficient cyclization reactions than either the ketene dithioacetal or enol ether derived radical cations. Cyclic voltammetry experiments using allylsilane trapping groups show that the efficiency of these cyclizations is not due to the N,O-ketene acetal radical cations being more reactive but rather more stable to decomposition. Finally, cyclizations using chiral oxizolidinones were examined.     

Effect of paramagnetic anions on cations possessing stereochemically non-equivalent methylene groups

A series of cations based on substituted pyrrolidines and piperidines has been investigated by NMR in low dielectric solvents. Non-equivalent cation methylene protons are selectively shifted by paramagnetic anions; the size of the shift depends directly on the ability of the anion to approach closely the group in question. The assignments resulting from the shift data have been compared with the work of other authors.     

First generation poly(propyleneimine) dendrimers functionalised with 1,8-naphthalimide units as fluorescence sensors for metal cations and protons

The synthesis of two new green fluorescent poly(propyleneimine) dendrimers from first generation has been described. The new materials are comprised of a 1,8-naphthalimide fluorophore having a substituent at C-4 position. The substituent in the first case is a N,N-dimethylaminoethylamino group while in the second one it is N-methylpiperazine. The spectroscopic and photophysical characteristics of the new dendrimers determined in organic solvent of different polarity have been presented. Both dendrimers show substantial increases in their fluorescence intensity in the presence of metal cations (Zn²⁺, Co²⁺, Ni²⁺, Pb²⁺, Mn²⁺, Cu²⁺, Fe³⁺ and Ag⁺) and protons. The influence of the photoinduced electron transfer on their sensing properties has been discussed.     

Sulfonated Microporous Polymer Membranes with Fast and Selective Ion Transport for Electrochemical Energy Conversion and Storage

Membranes which allow fast and selective transport of protons and cations are required for a wide range of electrochemical energy conversion and storage devices, such as proton‐exchange membrane (PEM) fuel cells (PEMFCs) and redox flow batteries (RFBs). Herein we report a new approach to designing solution‐processable ion‐selective polymer membranes with both intrinsic microporosity and ion‐conductive functionality. Polymers are synthesized with rigid and contorted backbones, which incorporate hydrophobic fluorinated and hydrophilic sulfonic acid functional groups, to produce membranes with negatively charged subnanometer‐sized confined ionic channels. The ready transport of protons and cations through these membranes, and the high selectivity towards nanometer‐sized redox‐active molecules, enable efficient and stable operation of an aqueous alkaline quinone redox flow battery and a hydrogen PEM fuel cell.     

Thermal benzene activation by 3d transition metal (Sc-Cu) oxide cations

Considering the importance and complexity of benzene oxidation on mineral oxide aerosol surfaces in the atmosphere,gas-phase 3 d-transition metal oxide cations were used as models of active sites on mineral oxide aerosols to mimic the corresponding reactions.The various cations have been prepared by laser ablation and reacted with benzene in a linear ion trap reactor.Of the 103 systematically investigated cations,39 clusters can oxidize benzene at room temperature.In addition to the adsorption channel,other five types of reaction channels were observed,including dehydrogenation of C6H6,charge exchange,hydrogen atom transfer,oxygen atom transfer,and the formation of C6H5O^+radical,among which the first two pathways are prevale nt and the formation of C6H6O^+cations has not been reported in literature.The insight into the benzene oxidation reactions derived from the gas-phase model systems is helpful to build a detailed picture of oxidative mechanisms of C6H6 and its derivatives over corresponding mineral oxide aerosols.     

Molecular electric field mapping of some anions and cations of 2- aminopurine and 6- thioguanine

Electric fields of the anions, cations and neutral forms of 2-aminopurine and 6-thioguanine have been mapped. Certain important features of the maps are similar to those found earlier in the neutral and ionic forms of adenine and guanine. The computed electric field patterns satisfactorily explain reactive sites and biological activity of the molecules.