Dynamic mechanical and thermal characteristics of homopolymers and copolymers containing arylene ether ketone units with carboxylic side groups and their salts

Properties of a poly(arylene ether ketone) with carboxyl side groups, copolymers containing units of this homopolymer, and their salts with different degrees of neutralization by alkali metals were studied by the methods of dynamic mechanical analysis, thermogravimetric analysis, and differential scanning calorimetry. By varying the nature of a metal atom and the degree of neutralization of carboxylic groups of a homopolymer and their content in copolymers, one may change the properties of polymers, including their ability to form ion pairs and, hence, their glass transition temperatures. For polymer salts at the 100% neutralization of carboxylic groups, the storage modulus and the glass transition temperature are shown to increase with decreasing the radius of the metal ion. The thermal stability of poly(arylene ether ketone) with carboxylic side groups and copolymers with different contents of such groups may be controlled by varying the nature and content of the introduced metal.     

New poly(arylene ethers) containing side sulfo groups

New poly(arylene ethers) containing side sulfo groups have been synthesized through the copolycondensation of 3,5-dinitrodiphenyl sulfone 4′-sulfonic acid and 4,4′-dichlorodiphenyl sulfone with bicyclic aromatic bisphenols under the conditions of aromatic nucleophilic substitution. On the basis of the blends of these copolymers with sulfonated poly(arylene ester ether ketone), membranes with satisfactory mechanical characteristics and high proton conductivity have been prepared.     

多磺化侧链型聚芳醚的合成及性能

本文通过对聚合物的结构设计,采用亲和取代的途径制备了含有甲氧基侧链的聚芳醚聚合物,然后去醚化得到了侧链含有羟基的聚芳醚材料,最后通过接枝的方法将磺酸基团引入聚合物成功的制备出多磺化侧链型聚芳醚质子交换膜材料。此类材料表现出好的热化学稳定性, 80 oC时的质子传导率可达到0.192 S/cm,超过了Nafion 117 薄膜的传导率.同时此类材料表现出低的尺寸稳定性。因此此类材料很有希望在质子交换膜领域得到应用     

含羧基交联型质子交换膜的制备及其性能

合成了一种含酯基的磺化聚合物,利用后水解的方法得到了含有羧基侧基的聚合物;将磺化聚合物与聚乙烯醇通过溶液共混,热处理后得到交联型的共混膜材料。 研究结果表明,膜材料的玻璃化转变温度(Tg)有明显的上升,证明了交联反应的发生;同时,膜的吸水率和溶胀率有一定的下降,力学性能和热稳定性也有一定的提升。 通过共价交联的方法,制备了综合性能优异的磺化聚芳醚质子交换膜材料。 在100 ℃,交联膜的质子传导率为0.072~0.065 S/cm,吸水率为51%~89%,溶胀率为19%~30%。     

Synthesis and characterization of multiblock partially fluorinated hydrophobic poly(arylene ether sulfone)‐hydrophilic disulfonated poly(arylene ether sulfone) copolymers for proton exchange membranes

Hydrophobic‐hydrophilic sequence multiblock copolymers, based on alternating segments of phenoxide terminated fully disulfonated poly(arylene ether sulfone) (BPS100) and fluorine‐terminated poly(arylene ether sulfone) (6FBPS0) were synthesized and evaluated for application as proton exchange membranes. By utilizing mild reaction conditions the ether–ether interchange reactions were minimized, preventing the randomization of the multiblock copolymers. Tough, ductile, transparent membranes were solution cast from the block copolymers and were characterized with regard to intrinsic viscosity, morphology, water uptake, and proton conductivity. The conductivity values of the 6FBPS0‐BPSH100 membranes were compared to Nafion 212 and a partially fluorinated sulfonated poly(arylene ether sulfone) random copolymer (6F40BP60). The nanophase separated morphology was confirmed by transmission electron microscopy and small angle X‐ray scattering, and enhanced proton conductivity at reduced relative humidity was observed with longer block lengths. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Proton conductivity of poly(arylene ether ketones) with different sulfonation degrees: Improvement via incorporation of nanodisperse zirconium acid phosphate

The proton conductivity of films based on sulfonated poly(arylene ether ketone) derived from bisphenol A and 4,4′-difluorobenzophenone of various modification degrees has been studied. The conductivity achieves high levels upon incorporation of a large amount of sulfo groups into the polymer. The conductivity of the samples with low sulfonation degrees may be increased via introduction of the nanodisperse zirconium acid sulfate additive.     

Effects of gamma and electron beam irradiation on polymer electrolytes

Polymer electrolytes based on poly(ethylene oxide) and lithium salts have been widely studied in recent years. In order to enhance the room temperature ionic conductivity of PEO-LiX complexes, various techniques, such as addition of plasticizers and crown ether, and also irradiation by γ and electron beams have been investigated. The enhancement of the conductivity by irradiation has been accounted for the decreasing of the crystallinity of PEO-LiX. We reviewed these results and have investigated the degradation processes of PEO using Tb³⁺ fluorescence probes. We have also studied on the effects of irradiation of polymers such as poly(acrylic acid) (PAA), poly(methacrylic acid) (PMA) and PEO using Tb⁺³ fluorescence probe. Various monomers containing SO₃H and COOH have been grafted on poly(ethylene oxide) using irradiation technique. The structures and ionic conductivities of Li and Na salts of irradiated products were investigated in detail.     

Controlled sulfonation of poly(arylene ether sulfone)s and poly(arylene ether ketone)s with different molecular structures for polymer electrolyte membranes

Poly(arylene ether sulfone) copolymers derived from 9,9-bis(4-hydroxyphenyl)fluorene, bisphenol S and 4,4′-difluorodiphenylsulfone and poly(arylene ether ketone) copolymers derived from 4-phenoxybiphenyl, diphenyl ether and isophthaloyl chloride were prepared as precursor polymers for sulfonation reaction in which sulfonic groups are introduced quantitatively into specified positions. Sulfonation reaction for these two series of copolymers by concentrated sulfuric acid was successfully carried out to give sulfonated polymers with controlled positions and degree of sulfonation. Thermal stability, moisture absorption and proton conductivity for these two series of copolymers were measured and the results were compared to those of perfluorosulfonic acid polymers.     

Gas transport properties of novel poly(arylene ether ketone)s containing dibenzoylbiphenyl and benzonaphthone moieties

In this work we present the results from studies on novel poly(arylene ether ketone)s, including gas permeability, wide-angle x-ray diffraction (WAXD), and dynamic mechanical analysis (DMA). Poly(arylene ether ketone)s containing 2,2′- and 3,3′-dibenzoylbiphenyl (DBBP) moieties were characterized to study the effect of biphenyl substitution on gas transport properties. Gas permeabilities of naphthalene-containing poly(arylene ether ketone)s were also measured. Higher permeabilities were observed for polymers prepared with 6F-BPA, compared to 9,9-bis(4-hydroxyphenyl)fluorene (HPF). The naphthalene-containing polymers exhibited higher permeabilities than the DBBP polymers, except for a polymer having the 2,2′-DBBP and tetramethylbiphenyl moieties. Based on our work, and results reported in the literature, the 3,3′-DBBP polymers showed the lowest permeabilities for DBBP-containing poly-(arylene ether ketone)s. The low permeabilities are due to more efficiently packed chains brought on by greater flexibility of the backbone, compared to the other polymers studied. DMA studies confirmed the higher barriers to rotation which are believed to be responsible for 2,2′-DBBP polymers having similar selectivities compared to 3,3′-DBBP polymers. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 425–431, 1998     

Preparation of Anion Exchange Membrane Based on Imidazolium Functionalized Poly(arylene ether ketone)

The authors presented a novel synthetic route for the imidazolium functionalized poly(arylene ether ketone)s, derived from an engineering plastics polymer, a poly(arylene ether ketone) with 3,3',5,5'-tetramethyl-4,4'-dihydroxybiphenyl moiety(PAEK-TM). The preparation of anion exchange membranes comprised converting benzylic methyl groups to bromomethyl groups by a radical reaction, followed by the functionalization of bromomethylated PAEK with alkyl imidazoles, i.e., methyl, butyl or vinyl imidazole. The structure of imidazolium functionalized PAEK was proved by ¹H NMR spectra. A class of flexible and tough membranes was then achieved by subsequent film-forming and anion exchange processes. The water uptake and hydroxide conductivities of membranes are comparable or superior to those of quaternary ammonium(QA) anion exchange membranes. This work demonstrated a new route for non-QA anion exchange membrane design, avoiding the chloromethylation reagent and precisely controlling the degree and location of imidazolium groups.     

侧链型磺化聚芳醚酮质子交换膜材料的制备

本文通过对聚合物的结构设计, 采用均聚的途径将柔顺的大侧基(甲氧基苯基)引入聚芳醚酮侧链, 然后通过室温后磺化的方法成功制备出侧链型磺化聚芳醚酮材料. 此类材料表现出较好的热稳定性; 力学性能优异; 聚合物的质子传导率比报道过的类似材料有较大程度的提高; 于80 ℃时的质子传导率在0.190 S/cm以上, 超过了Nafion 117 薄膜的传导率(0.175 S/cm). 因此这类材料有望在质子交换膜领域得到应用.     

Comb-shaped homo- and copoly(arylene ether ketones) containing hydrophilic groups in side chains

Comb-shaped poly(arylene ether ketones) containing hydrophilic fragments in side chains are synthesized through the interaction of side reactive carboxyl groups of poly(arylene ether ketones) with methyl ethers of poly(ethylene glycol). Films based on these polymers possess tensile strengths up to 89 MPa and relative elongations at break up to 340%. Comb-shaped poly(arylene ether ketones) swell in water, and some of them show solubility in ethanol and methanol.     

Side-Chain Sulfonated Poly(arylene ether)s for Fuel Cell Applications

Summary: Poly(arylene ether sulfone)s of high molecular weight and narrow molecular weight distribution were obtained by melt polycondensation of 4,4′-difluorodiphenyl- sulfone and trimethylsilylethers of 4,4′-dihydroxydiphenylsulfone and phenylhydroquinone using CsF as catalyst. Although a block-like structure of the polymers could be expected from the course of reaction, only a single T_g ranging from 190 °C to 230 °C could be detected by DSC and which depended on the copolymer composition. Contrary to the sulfonation of similar poly(ether ether ketone)s the poly(arylene ether sulfone)s here reported were sulfonated both in the side chain and the main chain. Nonetheless the sulfonated poly(arylene ether sulfone)s showed high hydrolytic stability in water at 130 °C.     

Self-Crosslinkable poly(arylene ether)s containing pendent phenylenetriazene groups

Self-crosslinkable poly(arylene ether)s 6 , and 8 , containing pendent triazene groups were prepared by nucleophilic substitution reaction of poly(arylene ether)s 5 , and 7 , respectively, with 1-[4-(4-hydroxyphenoxy)phenylene]triazenes, 4 , in the presence of potassium carbonate in N,N-dimethylacetamide. A series of triazenes 4 containing various substituents have been synthesized. Self-crosslinkable polymer 6e containing phenyl-substituted triazene pendants can be crosslinked at 215°C, which is about 40°C lower than the glass transition temperature of the virgin base polymer 5 . The degree of crosslinking can be tailored by varying the concentration of the pendent phenylenetriazene groups in the polymer. After curing, the flexible polymer films (ca. 10 μm thick) exhibit high gel contents, increased glass transition temperatures, improved resistance to organic solvents, and little change in dielectric constant and thermal stability. These self-crosslinkable poly(arylene ether)s are potential candidates for electronic applications. © 1994 John Wiley & Sons, Inc.     

Ionic conducting membranes based on new sulfonated poly(arylene ether ketone)s for fuel cell applications

The synthesis and characterization of new di‐ and tetra‐sulfonated ether diketone monomers are described. From these monomers, a wide series of sulfonated poly(arylene ether ketone)s (SPAEK) are synthesized by varying the sulfonic acid repartition along the polymer backbones. Their chemical structures are thoroughly characterized by NMR. From these polymers tough membranes are obtained from solution casting method and their water uptake, ionic conductivity, and water/gas permeation properties are determined and compared with those of Nafion membrane. Preliminary fuel cell tests show that SPAEK membranes are promising candidates for fuel cell application. This work brings new insights concerning the beneficial effects of introducing densely sulfonated monomers in a polyarylether macromolecular structure along with fluorinated groups improving conductivity while reducing unwanted excessive swelling. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 771–777     

Effect of poly(arylene ether ketone)s of different chemical constitutions on adhesion properties of epoxyamine binder

The adhesive strength at the bipolymer blend/fiber interface was determined by the pull-out method. Epoxy resin blends with heat-resistant linear thermoplastics, poly(arylene ether ketone)s of different molecular masses and chemical compositions, were used as adhesives, and a steel wire of 150 μm diameter was used as a substrate. It was found that the addition of 5–20 wt % poly(arylene ether ketone) to epoxy resin results in a 10–20% increase in the adhesive strength; a sharp gain in the adhesive strength (by 50–80%) is observed at a modifier content of 30%. The introduction of nanoparticles (Na⁺-montmorillonite) into the epoxy resin-poly(arylene ether ketone) blend increases the strength of adhesive bonding to steel wire. Possible reasons for the observed changes in the adhesive strength are discussed.     

Naphthalene‐based poly(arylene ether ketone) copolymers containing sulfobutyl pendant groups for proton exchange membranes

A new monomer 1,5‐bis(4‐fluorobenzoyl)‐2,6‐dimethoxynaphthalene (DMNF) was prepared and further polymerized to form naphthalene‐based poly(arylene ether ketone) copolymers containing methoxy groups (MNPAEKs). The side‐chain‐type sulfonated naphthalene‐based poly(arylene ether ketone) copolymers (SNPAEKs) were obtained by demethylation and sulfobutylation. Flexible and tough membranes with reasonably high mechanical strength were prepared. The SNPAEKs membrane showed anisotropic membrane swelling with larger swelling in thickness than in plane. Transmission electron microscopy (TEM) analysis revealed clear nanophase separated structure of SNPAEKs membranes, which composed of hydrophilic side chain and hydrophobic main‐chain domains. Proton conductivities of copolymers increased gradually with increase in temperature. The highest conductivity of 0.179 S/cm was obtained for SNPAEK‐80 (IEC = 1.82 mequiv/g) at 80 °C, which is higher than that of Nafion117 (0.146 S/cm). The SNPAEKs membranes exhibit the methanol permeability in the range of 3.42 × 10^?8?4.49 × 10^?7 cm²/s, which are much lower than that of Nafion117. They could be the promising materials as alternative to Nafion membrane for direct methanol fuel cells applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47:5772–5783, 2009     

Synthesis and properties of multiblock copoly(arylene ether)s containing superacid groups for fuel cell membranes

A series of block copoly(arylene ether)s containing pendant superacid groups were synthesized, and their properties were investigated for fuel cell applications. Two series of telechelic oligomers, iodo‐substituted oligo(arylene ether ketone)s and oligo(arylene ether sulfone)s, were synthesized. The degree of oligomerization and the end groups were controlled by changing the feed ratio of the monomers. The nucleophilic substitution polymerization of the two oligomers provided iodo‐substituted precursor block copolymers. The iodo groups were converted to perfluorosulfonic acid groups via the Ullmann coupling reaction. The high degree of perfluorosulfonation (up to 83%) was achieved by optimizing the reaction conditions. Tough and bendable membranes were prepared by solution casting. The ionomer membranes exhibited characteristic hydrophilic/hydrophobic phase separation with large hydrophilic clusters (ca. 10 nm), which were different from that of our previous random copolymers with similar molecular structure. The block copolymer structure was found to be effective in improving the proton‐conducting behavior of the superacid‐modified poly(arylene ether) ionomer membranes without increasing the ion exchange capacity (IEC). The highest proton conductivity was 0.13 S/cm at 80 °C, 90% relative humidity, for the block copolymer ionomer membrane with IEC = 1.29 mequiv/g. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and properties of poly(arylene ether imide ketone)s

Poly(arylene ether ketone)s containing imide units were prepared by the aromatic nucleophilic displacement reaction of the potassium salts of bisphenols with bis(4-fluorobenzoyl)phthalimides in N-methyl-2-pyrrolidone at elevated temperature. The polymers having inherent viscosities of 0.34–0.77 dL/g were obtained in 2 h. The polymers exhibited glass transition temperatures ranging from 216 to 268°C and decomposition temperatures (5% weight loss under air atmosphere) ranging from 450–570°C mainly depending on the bisphenols used in the polymer synthesis. The isothermal TGA measurements (400°C under air or nitrogen atmosphere) revealed that the 4,4'-biphenol- and hydroquinone-based poly(arylene ether ketone imide)s belong to a superior class of heat resistant polymers. The mechanical properties of these polymers are also described. © 1994 John Wiley & Sons, Inc.     

The effect of the steric hindrance on metallic cation conduction in polymer electrolytes

2,6-Di-t-butylphenol and oligo(ethylene oxide) bound covalently to polyisocyanate were synthesized and characterized. The ionic conductivities of their Li, Na, and K phenolates were studied at various temperatures. The conductivities were in the range of 10^?7?10^?5 S/cm at 30°C. The conductivity of Na and K salts was approximately 10² greater than that of the Li salts. The t-butyl groups serve to dissociate K and Na ions from the phenoxide. The cations, therefore, are more mobile as a result increasing the conductivity. The temperature dependence of ionic conductivity suggests that the migration of ions is controlled by segmental motion of the polymer, shown by linear curves obtained in Vogel–Tammann–Fulchere plots. The polyisocyanate backbone is a rather stiff structure, however, a flexible oligo(ethylene oxide) side chain forms complexes with metal ion. Since the ion transport is associated with the local movement of polymer segments, the rigidity of the polymer backbone does not have much influence on the ion mobility.