A highly sensitive colorimetric and ratiometric sensor for fluoride ion

A new benzoimidazole-naphthalimide derivative 4 was synthesized and its photophysical properties were studied. This compound showed highly selectively and sensitive colorimetric and ratiometric sensing ability for fluoride anion.     

Fluorescent sensor for fluoride anion based on a sulfonamido-chromone scaffold

New scaffolds of sulfonamido-chromone derivatives recently synthesized were found to be effective fluorescent sensors for fluoride anion. This new class of fluorophore showed a blue shift in the emission spectra upon addition of various equivalents of fluoride. These compounds also exhibit excellent selectivity for the fluoride anion via a deprotonation process. They were also shown to have a detection limit of F^? down to 0.5?ppm.     

A computational study of SbnF5n (n = 1-4): Implications for the fluoride ion affinity of nSbF5

This contributions shows with a series of ab initio MP2 and DFT (BP86 and B3-LYP) computations with large basis sets up to cc-pVQZ quality that the literature value of the standard enthalpy of depolymerization of Sb₄F_20(g) to give SbF_5(g) (+18.5 kJ mol⁻¹) [J. Fawcett, J.H. Holloway, R.D. Peacock, D.R. Russell, J. Fluorine Chem. 20 (1982) 9] is by about 50 kJ mol⁻¹ in error and that the correct value of (Sb₄F_20(g)) is +68 ± 10 kJ mol⁻¹. We assign , , and values for Sb_nF_5n with n = 2-4 and compare the results to available experimental gas phase data. Especially the MP2/TZVPP values obtained in an indirect procedure that rely on isodesmic reactions or the highly accurate compound methods G2 and CBS-Q are in excellent agreement with the experimental data, and reproduce also the fine experimental details at temperatures of 423 and 498 K. With these data and the additional calculation of [Sb_nF_5n+1]⁻ (n = 1-4), we then assessed the fluoride ion affinities (FIAs) of Sb_nF_5n(g), nSbF_5(g), nSbF_5(l) and the standard enthalpies of formation of Sb_nF_5n(g) and [Sb_nF_5n+1]⁻_(g): FIA(Sb_nF_5n(g)) = 514 (n = 1), 559 (n = 2), 572 (n = 3) and 580 (n = 4) kJ mol⁻¹; FIA(nSbF_5(g)) = 667 (n = 2), 767 (n = 3) and 855 (n = 4) kJ mol⁻¹; FIA(nSbF_5(l)) = 434 (n = 1), 506 (n = 2), 528 (n = 3) and 534 (n = 4) kJ mol⁻¹. Error bars are approximately ±10 kJ mol⁻¹. Also the related Gibbs energies were derived. Δ_fH°([Sb_nF_5n+1]⁻_(g)) = −2064 ± 18 (n = 1), −3516 ± 25 (n = 2), −4919 ± 31 (n = 3) and −6305 ± 36 (n = 4) kJ mol⁻¹.     

Boron-dipyrromethene based specific chemodosimeter for fluoride ion

3,5-Bis(trimethylsilylethynyl)-4,4-difluoro-8-(4-tolyl)-4-bora-3a,4a-diaza-s-indacene [BODIPY(CCTMS)₂] has been synthesized by coupling of 3,5-dibromo-4,4-difluoro-8-(4-tolyl)-4-bora-3a,4a-diaza-s-indacene with trimethylsilylacetylene under pd(0) coupling conditions. The BODIPY(CCTMS)₂ was used as a selective colourimetric and fluorescent chemodosimeter for fluoride ion, following the F⁻ ion induced cleavage of trimethylsilyl group, the protecting group of ethyne functionality by monitoring the changes in UV-vis and fluorescence properties. The dosimeter BODIPY(CCTMS)₂ display clear changes in colour, absorption and emission bands selectively for F⁻ ion over other anions such as Cl⁻, Br⁻, I⁻, ClO₄⁻ and HPO₄²⁻.     

A computational study of AlN nanotube as an oxygen detector

Interaction of O2 molecule and a zigzag aluminum nitride nanotube(AlNNT) was studied based on the density functional theory.The O2 molecule is adsorbed on the surface of AlNNT with the adsorption energies in the range of 11.0 to 12.1 kJ/mol.Geometrical structure of the AlNNT remains intact in the presence of oxygen molecule while its electronic structure dramatically changes so that its HOMO(or SOMO)-LUMO gap is approximately reduced to half of its original value.It suggests that the AlNNT may be used as a gas sensor for the O2 detection.     

Urea-based polyacetylenes as an optical sensor for fluoride ions

Novel acetylenes carrying urea groups, 1-(4-ethynylphenyl)-3-(4-nitrophenyl) urea (1), 1-(4-propargyl)-3-(4-nitrophenyl) urea (2), were synthesized and polymerized with rhodium catalyst. Polymers [poly(1) and poly(2)] with moderate molecular weights were obtained in good yields. The anion sensing ability of poly(1) and poly(2) was estimated using the tetra-n-butylammonium (TBA) salts of a series of anions in DMF. Upon the addition of F-, the color of the DMF solution of poly(1) and poly(2) immediately turned to a different color, while the color of solution changed slightly upon addition of Cl-, HSO4-, Br-, and NO3-, indicating the F- sensing ability of poly(1) and poly(2). The 1H-NMR titrations of poly(1) revealed that the colorimetric response of poly(1) was triggered by the urea/F- interaction through the hydrogen bonding and/or deprotonation process. The absorption spectra titration and Hill plot analysis were carried out to measure the F- binding ability, and the Hill coefficient in the poly(1)/F- complexation was found to be 5.8. This result clearly indicated that this binding mode between poly(1) and F- was based on a positive homotropic allosterism.     

A high selective anion colorimetric sensor based on salicylaldehyde for fluoride in aqueous media

A new and simple salicylaldehyde-based sensor 1 designed for fluoride sensing has been investigated in DMSO and even in the 9/1 DMSO/H₂O (v/v) mixtures. The affinity constants of receptor 1 for anionic species in the 9/1 DMSO/H₂O (v/v) reveal that it is sensitive to F. Also, the color changes induced by anions can provide a way of detection by ‘naked-eye’. These result can be substantiated by the spectrum changes upon the addition of 25 equiv. anions to 1 in the 9/1 DMSO/H₂O solution. The further insights to the nature of interactions between the sensor 1 and F⁻ were investigated by ¹H NMR titration experiments in 9/1 DMSO-d₆/H₂O (v/v). In addition, the proposed binding mode between 1 and F⁻ was suggested.     

Azolylpentazoles as high-energy materials: a computational study

The structures of highly energetic substituted pentazole compounds and their decomposition to give dinitrogen and the corresponding azide were investigated by ab initio quantum chemical methods. The substituents include azolyl groups (five-membered aromatic rings with different numbers of nitrogen atoms), CH(3), CN, and F. The decomposition pathway was followed for several substituted azolyl- and phenylpentazoles and compared to the known experimental and theoretical results. The NMR parameters of most of the as-yet unknown pentazole compounds were predicted. The activation energy for the decomposition increases, while the decomposition energy of the substituted pentazole decreases with greater electron-donating character of the substituent of the pentazole. Thus, anionic pentazoles are more stable than neutral pentazoles. Methylpentazole is predicted to be among the most stable pentazoles, even though it does not contain an aromatic system.     

Highly emissive dimesitylboryl-substituted 2,1,3-benzothiadiazole derivatives: photophysical properties and efficient fluorescent sensor for fluoride anions

One symmetrical and two unsymmetrical dimesitylboryl-substituted BTD derivatives 1–3 were prepared through Pd(0)-catalyzed Suzuki coupling reaction. All these compounds display intense fluorescence not only in solution but also in the solid state due to steric bulkiness of the boryl group, which is effective to suppress the intermolecular interactions in the solid state. In addition, the boryl-substituted BTD 1 displays prompt fluorescence responses to fluoride ions with high sensitivity through the complexation of the boron center with fluoride, demonstrating its potential utility as fluorescent sensor for fluoride ions.     

Fabrication of an electrochemical sensor based on spiropyran for sensitive and selective detection of fluoride ion

In the past decades, numerous electrochemical sensors based on exogenous electroactive substance have been reported. Due to non-specific interaction between the redox mediator and the target, the instability caused by false signal may not be avoided. To address this issue, in this paper, a new electrochemical sensor based on spiropyran skeleton, namely SPOSi, was designed for specific electrochemical response to fluoride ions (F⁻). The breakage of Si–O induced by F⁻ based on the specific nucleophilic substitution reaction between F⁻ and silica would directly produce a hydroquinone structure for electrochemical signal generation. To improve the sensitivity, SPOSi probe was assembled on the single-walled carbon nanotubes (SWCNTs) modified glassy carbon electrode (GCE) through the π–π conjugating interaction. This electrode was successfully applied to monitor F⁻ with a detection limit of 8.3 × 10⁻⁸ M. Compared with the conventional F⁻ ion selected electrode (ISE) which utilized noncovalent interaction, this method displays higher stability and a comparable sensitivity in the urine samples.     

Hydrogen bonds and ionic interactions in Guanidine/Guanidinium complexes: a computational case study

It is frequently said that hydrogen bonds (HBs) are enhanced by ionic interactions and in this article we intend to determine the degree at which this reinforcement happens. Considering our interest in the Guanidine(neutral)/Guanidinium(cation) system and its particular nature, all the possible 1:1 complexes with the Chloride(anion)/Hydrochloric acid(neutral) system have been studied at different levels of computation (B3LYP with 6-31+G* and TZVP basis sets; MP2 with 6-31+G*, 6-311++G** and aug-cc-pVDZ basis sets; CBS-QB3 and G3MP2). The nature of these interactions established in all the systems and, when possible, at all the levels of computation used in this study, has been analyzed using Atoms in Molecules and Natural Bond Orbital methodologies. By examining the interaction energy, the electron density at the bond critical bonds, the atomic energy, the charge transfer, the orbital energy, and the deformation energy we can conclude that HBs are stronger when the ionic interaction is stronger. Thus, both interactions do not work in an independent manner but one reinforces the other to different degrees depending on the nature of the charges present. Several correlations with the interaction energy have been found and a partition of the contributions of both the HB and ionic forces to the total interactions is proposed.     

A highly emissive cruciform triarylborane as a ratiometric and solid state fluorescence sensor for fluoride ions

We disclosed a novel cruciform tri-coordinate organoboron compound, 2′,5′-bis{[(4-dimesitylboryl)phenyl]ethynyl}-1′,4′-bis[(4-N,N-diphenylamino)phenyl]-[1,1′:4′,1′]terphenyls, which displays a characteristic intramolecular charge transfer transition and is highly emissive both in solutions and solid state. The complexation with fluoride ions induces a large blue shift in fluorescence, enabling ratiometric fluorescence sensing of fluoride. In addition, its prompt response to fluoride ions was also observed even in the solid state.     

Organic electrosynthesis using a fluoride ion mediator

Recent studies on fluoride ion-mediated anodic methoxylation of fluoroalkyl sulfides and sulfur-containing five-membered heterocyclic compounds together with its synthetic applications are summarized in this review. The first example of anodic methoxylation of 2-acyloxy-3,3,3-trifluoropropyl sulfides accompanying with [1,2]-rearrangement of acyloxy group is described. Fluoride ion-mediated anodic intramolecular cyclization of 3,3,3-trifluoropropyl sulfides bearing OH and t-BuCOO groups provides CF₃-containing 1,3-oxathiolane and ethylene carbonate derivatives, respectively. Fluoride ion mediator can be also applied to anodic intramolecular carbon–carbon coupling to form oxindole and 3-oxotetrahydroisoquinoline derivatives.     

Proton affinities of ketones, vicinal diketones and α-keto esters: a computational study

The proton affinities of seven different ketones, vicinal diketones, and α-keto esters (acetophenone, 2,2,2-trifluoroacetophenone, 2,3-butanedione, 1-phenyl-1,2-propanedione, methyl pyruvate, ethyl benzoylformate, and ketopantolactone) have been evaluated theoretically using the conventional ab initio HF and several post-HF methods (MP2, MP4, CCSD), density functional methods with the B3LYP hybrid functional, as well as some ab initio model chemistries [CBS-4M, G2(MP2), and G3(MP2)//B3LYP]. The chemical compounds studied are frequently used substrates in the asymmetric hydrogenation over chirally modified platinum catalysts where the protonation properties of the chiral modifier and the substrates are of great interest. In most cases, the proton affinities (PAs) evaluated with the CCSD/6-311+G(d,p)//B3LYP/TZVP and G2(MP2) methods are in good agreement with the existing experimental ones. However, the previously reported PA of 2,3-butanedione seems to be too high by 10-15 kJ mol⁻¹. The B3LYP/TZVP//B3LYP/TZVP and MP2/6-311+G(d,p)//B3LYP/TZVP model chemistries predict proton affinities that are systematically higher and lower than the experimental PAs, respectively. If proton affinities are evaluated as the average of the PAs calculated with these two theoretical methods a very good agreement with the experimental results is obtained. The mean absolute deviation (MAD) from experiment of this combination method for the PAs of 13 test molecules is 4.0 kJ mol⁻¹. For 9 molecules composed only of first-row atoms the MAD is 2.5 kJ mol⁻¹. The B3LYP/TZVP//B3LYP/TZVP and MP2/6-311+G(d,p)//B3LYP/TZVP methods provide significant savings in computational time and disk space compared to the CCSD/6-311+G(d,p)//B3LYP/TZVP and G2(MP2) models. Therefore, it is suggested that if no experimental or highly accurate theoretical data is available (due to computational cost), the proton affinities of similar compounds as investigated in this paper, can be evaluated with the combination method. For the studied molecules, this method gives the following PAs (in kJ mol⁻¹): 788 (2,3-butanedione, exptl 802); 798 (2,2,2-trifluoroacetophenone, exptl 799); 811 (ketopantolactone); 813 (methyl pyruvate); 825 (1-phenyl-1,2-propanedione); 862 (acetophenone, exptl 861); 865 (ethyl benzoylformate).     

Preparation of a new solid state fluoride ion selective electrode and application

A new solid state fluoride ion selective electrode composed of 70% Ag₂S, 10% Cu₂S and 20% CaF₂ has been developed. An analytically useful potential change occurred, from 1 × 10⁻⁶ to 1 × 10⁻¹ M fluoride ion. The slope of the linear portion (1 × 10⁻¹-1 × 10⁻⁵ M) was about 26 ± 2 mV/10-fold concentration changes in fluoride. It was found that pH change between 1 and 8 had no effect on the potential of the electrode. There was no interference of most common cations such as K^+, Na⁺, Ca²⁺ and Mg²⁺ and anions such as Cl⁻, NO₃⁻, SO₄²⁻ and PO₄³⁻. The lifetime of the electrode was more than 2 years, when used at least 4-5 times a day, and the response time was about 60 s.The measurements were made at constant ionic strength (0.1 M NaNO₃) and at room temperature. This electrode has been used for the determination of fluoride ion in Ankara city tap water and in bottled spring water using standard addition method. The validation of the electrode has been made with a commercial fluoride ion selective electrode (Orion) and high consistency was obtained.     

Gas phase and water solution conformational analysis of the herbicide diuron (DCMU): an ab initio study

In the present work, the conformational equilibrium for the herbicide diuron (DCMU) has been investigated using high level ab initio calculations. The solvent effect was included through two different continuum models: (1) the real cavity IPCM method and (2) the standard dipole Onsager model SCRF. The effect due to solute-solvent hydrogen-bond interactions was analyzed considering a hybrid discreet-continuum model. At the Hartree-Fock level, the gas phase results showed that only the trans forms (A and B) are present in the equilibrium mixture, with the relative concentrations found to be 33% (A) and 67% (B) (HF/6-311+G**//6-31G**). When the electronic correlation effect is included (MP2/6-31G*//HF/6-31G*), a relative stabilization of the cis forms was observed, with the conformational distribution calculated as 38% (A), 50% (B), 6% (C) and 6% (D). The trans conformations were found to be completely planar, which has been considered to be a prerequisite for the herbicide binding. In water solution, the trans conformation A should be the most abundant conformer, the IPCM and SCRF values being ca. 100% and ca. 85% respectively. The IPCM calculations with the isodensity level set to 0.0005 present a conformational distribution close to that obtained from the hybrid model [92% (A) and 8% (B)], which has been considered our best solvent approach. Regarding the biological action of urea-type herbicides, the results presented here are important, because some QSAR studies have suggested that the partition coefficient is related to the herbicide activity, so the conformational equilibrium may play a role in the biological action. Received: 23 February 1998 / Accepted: 28 May 1998 / Published online: 19 August 1998     

双核Au(Ⅰ)配合物[Y+]2[Au(i-mnt)]2(Y+=[n-Bu4N]+,K+,[Ph4As]+)发光机制的从头计算研究

用从头算方法研究[Au(i-mnt)]22-(i-mnt=i-marononitriledithiolate)的电子吸收和磷光发射性质,利用MP2和CIS方法分别优化了[Au(i-mnt)]22-基态和激发态几何结构.计算的基态Au(Ⅰ)—Au(Ⅰ)键长为0.2825nm,表明Au(Ⅰ)之间存在弱吸引作用.采用SCRF方法中IPCM模型模拟配合物在乙氰溶液中的行为,计算得到的最大吸收波长为315.5nm,指认X1Ag→A1Au来源于i-mnt配体内电荷转移跃迁.在436.2nm处得到具有B3Au→1Ag跃迁的磷光发射,指认为i-mnt配体内电荷转移和金属到配体电荷转移跃迁,与500nm乙氰溶液的发射相对应,为金属修饰的有机配体发光机制.     

Complete basis set ab initio computational study of three-dimensional aromaticity in highly symmetric hydrogen clusters

The aromaticity of planar and highly symmetric three-dimensional hydrogen clusters were evaluated with the complete basis set ab initio computational method. The energy of formation of the hydrogen clusters from the hydrogen molecule and hydrogen molecular ions were used in comparison to their relative stabilities. The aromaticity of planar hydrogen clusters, as well as hydrogen clusters in the three dimensions, arranged as highly symmetric regular polyhedra (Plato's polyhedras), were discussed with respect to the Hückel and Möbius aromatic rules.     

Organotin compounds: an ionophore system for fluoride ion recognition

Ion-selective properties were established for membrane electrodes prepared by using organotin compounds of type (L^CNRSnF₂)_n, (R = n-Bu (I), = Ph (II)) and (L^CNSnF₃)_n (III) (L^CN = C₆H₄(CH₂NMe₂)-2). Electrodes formulated with the optimized membranes containing the organotin compounds I-III as ionophores and sodium tetraphenylborate (10-30%) exhibited high selectivity for fluoride over other anions. An electrode prepared with ionophore II using dibutyl phthalate as the plasticizer and 15% sodium tetraphenylborate (NaTPB) as anion additive, possesses the best potentiometric response characteristics. It shows a detection limit of 7.9 × 10⁻⁷ M with a slope of 62.7 mV decade⁻¹ of activity in buffer solutions of pH 5.5. The interference from other anions is suppressed under this optimized measurement conditions. An entirely non-Hofmeister selectivity sequence (F⁻ > CH₃COO⁻ > Cl⁻ > I⁻ ∼ Br⁻ >ClO₄⁻ > NO₂⁻ > NO₃⁻ > SCN⁻) with remarkable preference towards fluoride is obtained. The influence on the electrode performances by anion additive was studied, and the possible response mechanism was investigated by UV-vis spectra. The electrode has been used for direct determination of fluoride in drinking mineral water with satisfactory results.     

High level of ab initio and density functional theory computational study of structural and energetic properties of tetrafluorhydrazine rotamers

The HF, MP2, MP3, MP4, and QCISD ab initio methods were compared with local, hybrid, and gradient-corrected density functional theory (DFT) methods for computing structures and energies of N2F4 rotamers. In all DFT calculations 6-311 + G(2d) basis set was used. The generated structures energies of trans- and gauche-N₂F₄ rotamers, and their dissociation energies to nitrogen difluoride were compared with experimental data. Suitable hybrid and gradient-corrected DFT methods for determining structures and energies for these and similar molecular systems were discussed.