Conductometric and DSC evidence for a high temperature phase transition in cobalt dibromide

A solid-state phase transition in cobalt dibromide at 647 K has been revealed by three different alternative current techniques. A small thermal effect of (181±18) J mol⁻¹ corresponding to the enthalpy of the transition has been determined by differential scanning calorimetry. The effect was observed on cooling and on heating as well.     

DSC study of phase transition of anhydrous phospholipid DHPC and influence of water content

The phase transition behavior of 1,2-di-n-heptadecanoyl phosphatidylcholme (DHPC)with and without water has been studied by use of differential scanning calorimetry It was found by experiment that the glass transition occurred at first during the first heating of a sample of DHPC without water and then the sample underwent melting as an ordinary crystal.Therefore the sample of DHPC without water was a glassy crystal However,the DHPC sample crystallizing from melt was an ordinary crystal From the relationship between the total melting enthalpy Qf of freezable water and the water content h,it was concluded that the water contained in the DHPC samples might exist in three states recognizable thermodynamically.The water in the first state was an unfreezable water It was the water bound directly with the head groups of the phospholipid,i.e.the primary hydration water Every head group might bind seven such molecules of water.The water in the second state was the secondary hydration water,us melt ing point was     

Fine structure and phase transition behavior of fluorinated comb copolymers

The fine structure in the solid state and phase transition behavior of newly synthesized comb copolymers having fluorocarbon and hydrocarbon side‐chains were investigated by temperature controlled wide angle X‐ray diffraction (WAXD) and differential scanning calorimetry (DSC). From the WAXD profiles, two kinds of short spacing peaks based on the formation of the subcell for fluorinated and hydrogenated side‐chains were confirmed at 5.0 and 4.1 Å, respectively. Furthermore, two kinds of endothermic peaks, which corresponded to melting peaks of both side‐chain crystals, appeared in heating process of the DSC thermograms. From these experimental findings, the phase separation structure having the independently packed immiscible side‐chain crystalline was formed in the whole polymer crystal. In addition, it was found that these comb polymers formed highly ordered (double) layer structure estimated using WAXD and small angle X‐ray scattering (SAXS). These fluorinated comb copolymers form a monolayer on the water surface and their transferred film with phase‐separated structure at nanometer size on solid. There were hydrogenated domains at 10–20 nm diameter scales in these phase separated surface structure of monolayers. From these experimental results, these copolymer monolayers are expected to be used as a new molecular device such as nanolithography based on the surface patterning of polymer nanomaterials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 416–425, 2006     

Effects of surfactants on the phase transition of poly(N-isopropylacrylamide) in water

The effects of both anionic (sodium dodecyl sulfate, SDS) and cationic (dodecylpyridine bromide, DPB) surfactants on the phase transition of narrowly distributed poly(N-isopropylacrylamide) (PNIPAM) microgel particles were investigated by laser light scattering. The addition of SDS swells the particles and increases the phase transition temperature, while DPB has a much smaller effect. This difference cannot be due to an association between the surfactant hydrophobic tail and PNIPAM because DPB and SDS have an identical hydrophobic tail. The amide groups in PNIPAM are slightly protonized in deionized water (pH ∼ 5.5). Our results contradict a previous prediction that oppositely charged surfactants will collapse a polyelectrolyte gel. After adding SDS, a two-step phase transition of the PNIPAM gel is observed. This suggests that SDS forms micelles inside the microgel with the help of the immobilized counter ions on the gel network. The SDS micelles are broken into individual SDS molecules in the first step of phase transition, while in the second step individual SDS molecules are gradually expelled. Surfactant effects on the microgel particles are compared with those of individual PNIPAM chains. © 1996 John Wiley & Sons, Inc.     

In-depth analysis on thermal phase transition mechanism of main-chain phosphorus-containing thermotropic liquid crystal copolyester

In order to surmount drawbacks of the infrared spectroscopy (IR) itself during investigating the mesophase-transition behaviours and mechanism of the thermotropic liquid crystalline polymers (TLCPs), the elemental phosphorus as an internal marker was introduced into the main-chain TLCPs. The detail mechanism of the glass transition and mesophase phase transition of the phosphorus-containing aromatic liquid crystalline copolyester (poly(-hydroxybenzate-co-DOPO-benzenediol dihydrodiphenyl ether terephthalate) [PHDDT]) was revealed through tracing the internal marker with the perturbation correlation moving window 2-dimensional correlation and 2-dimensional correlation analysis (2DCOS) correlation IR spectra. The results showed that the phosphorus-containing unit did not participate in the glass transition of the PHDDT. The results of the 2DCOS showed that the PHDDT mesophase phase transition took place through adjustment of the phosphorus-containing units. Simultaneously, the adjustment of the phosphorus-containing unit also can induce the motion of the other groups, and the sequential orders of the spectral changes were Ar–O–Ar → ester C–O → C=O. However, the sequential orders of the spectral changes were converse during the PHDDT glass transition.     

Comparison of simulated and actual DSC measurements for first-order transitions

A system of differential equations modeling a heat flux DSC is solved and the results are compared with those obtained using a TA Instruments Q1000™ DSC.¹ It incorporates a new heat flow rate measurement technique that determines the heat flow rate between the sample and its pan. Two types of first-order transitions are investigated: melting of a pure substance and solidification of a pure substance including super-cooling. In both transitions, the peak shape obtained using the new heat flow rate measurement and predicted by the model is quite different from that measured using conventional DSC. It is shown that the differences are the result of simplifications implicit in the conventional heat flow rate measurement that is based solely on the difference between sample and reference calorimeter temperatures. Heat flow rates measured using the improved measurement agree very well with the model predictions for heat exchange between the sample and its pan.     

Synthesis of low‐polydispersity poly(N‐ethylmethylacrylamide) by controlled radical polymerizations and their thermal phase transition behavior

Controlled radical polymerizations of N‐ethylmethylacrylamide (EMA) by atom transfer radical polymerization and reversible addition‐fragmentation chain transfer processes were investigated in detail for the first time, employing complementary characterization techniques including gel permeation chromatography, ¹H NMR spectroscopy, and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry. In both cases, relatively good control of the polymerization of EMA was achieved, as revealed by the linear evolution of molecular weights with monomer conversions and the low polydispersity of poly(N‐ethylmethylacrylamide) (PEMA). The thermal phase transitions of well‐defined PEMA homopolymers with polydispersities less than 1.2 and degrees of polymerization up to 320 in aqueous solution were determined by temperature‐dependent turbidity measurements. The obtained cloud points (CPs) vary in the range of 58–68 °C, exhibiting inverse molecular weight and polymer concentration dependences. Moreover, the presence of a carboxyl group instead of an alkyl one at the PEMA chain end can elevate its CP by ～3–4 °C. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 60–69, 2008     

Substrate interaction effects on order to disorder transition behavior in block copolymer films

We present an overview of the recent progress on the phase transition in the block copolymer (BCP) films in terms of the interfacial interactions effects of the substrates and the χ (Flory-Huggins segmental interaction parameter) effects between the two blocks. For the BCP films thinner than a critical thickness (L_c) above which the transition is independent of film thickness, the order-to-disorder transition (ODT) increased or decreased with decreasing film thickness depending on the interfacial interaction types. The rapid and slow changes in the ODT were attributed to the relative magnitude of enthalpic contribution to χ between two blocks. Interestingly, a periodic amplification in the block composition for the BCP films suppressed the compositional fluctuation in the film geometry, resulting in the ODT shifts from the bulk ODTs above L_c. This effect of the BCP films was more illustrated by the ODT shift effects depending on the strength of the preferential interactions on the substrates. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Studies on phase transition processes of radiation synthesized hydrogels

PAM hydrogel and P(AM-NaA) (polyacrylamide-sodium acrylate) copolymer hydrogels with different AM/NaA ratios by radiation polymerization of aqueous solutions were synthesized. For further developing sensitive materials, we investigated the phase transition processes of all of the hydrogels in acetone-water solutions (so called A-W).     

Pressure effects on the phase transition of urea adducts withn-paraffins and polyethylene

The decomposition of urea adducts with hydrocarbons is treated as a first-order phase transition and the pressure dependence is studied up to 0.7 GPa for several kinds of adducts. The thermodynamic quantities at the decomposition of the adduct can be analysed as a sum of those quantities of the component materials. The transition from the orthorhombic to the hexagonal form of the adduct with polyethylene is also investigated by X-ray diffraction and the pressure dependence of the lattice parameters is measured for the adducts. The results are compared with the phase transition in the pure paraffin.     

Effects of thermal history on solid state and melting behavior of amino acids

Dielectric Thermal Analysis (DETA) of drugs, proteins and amino acids reveals a strongly linear conductivity increase prior to and peaking at the melt, associated with dielectric viscoelastic properties of the material. Premelt onset and peak are shown to depend on thermal history. Comparisons of neat amino acid samples to samples heated to 150 °C; dried in a desiccator; or heated above their melting point and cooled show significant premelt and melt shifts. Melts are also correlated with phase transitions observed by Differential Scanning Calorimetry (DSC). Activation energies attributed to charging in the premelt for amino acids were typically 250 J/mole.     

Thermal analysis study of some transition metal complexes by TG and DSC methods

The thermodynamic and thermal properties of [Cu(L)₂·Cl₂], [Ni(L)₂]·Cl₂, [Co(L)₂·Cl₂]; L=1,2-bis(o-aminophenoxy)ethane (BAFE), complexes have been investigated. The thermal decomposition of the complexes took place in two distinct steps in endothermic reaction up to 700°C. The activation energy E, the entropy change S ^#, enthalpy H change and Gibbs free energy change G ^# were calculated from the results of thermogravimetry analysis (TG) and heat capacity from the results of differential scanning calorimetry (DSC). It was found that the thermal stabilities and activation energies of the complexes follow the order Ni(II)>Cu(II)>Co(II) and E _Co<E _Ni<E _Cu, respectively.This revised version was published online in November 2005 with corrections to the Cover Date.     

Multiphysics modelling of volume phase transition of ionic hydrogels responsive to thermal stimulus

This paper presents the analysis of the volume phase transition of ionic thermo-sensitive hydrogels to thermal stimulus through mathematical modelling. The model is termed the multi-effect-coupling thermal-stimulus (MECtherm) model and it considers the effects of multi-phases and multi-physics. Its application to steady-state analysis of the hydrogels in swelling equilibrium is validated against available experimental data for the relation between volume swelling ratio and temperature, in which very good agreement is achieved. The phenomenon of volume phase transition is studied for the thermal-stimulus responsive hydrogel. The numerical studies predict well the influences of initially fixed charge density and initial volume fraction of polymeric network on the swelling equilibrium of the hydrogels.     

Synthesis and diels–alder polymerization of furfurylidene and furfuryl-substituted maleamic acids

The reactions of monomaleamic acid derived from an aromatic diamine with furfural afforded a novel class of furfurylidene-substituted maleamic acids 2a–2d . The latter were cyclodehydrated to yield maleimides 3a–3d which are AB-monomers for a Diels–Alder polymerization. In addition, N-furfurylmaleamic acid ( 4 ) was synthesized by reacting furfurylamine with maleic anhydride at ambient temperature. Cyclodehydration of 4 afforded N-furfurylmaleimide ( 5 ). The polymer precursors were characterized by IR and ¹H-NMR spectroscopy. Their curing behavior was investigated by DTA and correlated with chemical structures. Diels–Alder polymerization of monomers occurred at the temperature range of 113–210°C. Thermal stability of monomers was evaluated by TGA and isothermal gravimetric analysis (IGA). It was shown that thermal stability of the polymer derived from maleamic acid 4 was dramatically improved upon curing at high temperatures due to the formation by dehydration of a stable aromatic structure.     

Effect of cholesteric liquid crystalline elastomer with binaphthalene crosslinkings on thermal and optical properties of a liquid crystal that show smectic A‐cholesteric phase transition

A side‐chain polysiloxane cholesteric liquid crystalline elastomer (ChLCE) with binaphthalene derivate as crosslinkings and cholesterol derivate as liquid crystalline monomers was designed and synthesized. A binaphthyl chiral dopant (CD) was synthesized as well. The chemical structures and liquid crystalline properties of the ChLCE and the CD were characterized by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, element analyses, differential scanning calorimetry and polarizing optical microscopy measurements. The helical twisting power of the ChLCE exhibited a turning point with changing temperature and was smaller than that of the CD. In addition, the effect of the ChLCE on phase transition temperatures and thermal‐optical properties of a liquid crystal that show smectic A (SmA)‐cholesteric (Ch) phase transition was studied. Worthily, the testing of the reflection wavelength with changing temperature suggested that the adding of the ChLCE in liquid crystals that show SmA‐Ch phase transition can expedite their SmA‐Ch transition. In addition, the network structure of the ChLCE may play a significant role in the accelerating of the transition. These properties provided theoretical and experimental foundations for applying ChLCE in thermally sensitive liquid crystal devices requiring fast response, such as thermally controllable windows, materials and displays. Copyright © 2012 John Wiley & Sons, Ltd.     

Thermal characteristics of solid-solid phase transitions in long-chain dialkyl ammonium salts

A series of symmetrical dialkyl ammonium salts, DC_nX, has been prepared and characterized with respect to temperature and enthalpy of solid-solid phase transitions, temperature of melting, thermal stability as well as the reversibility of the phase transitions. The number of carbon atoms, C_n, was varied between 8 and 18 and as anions X halides, nitrate, chlorate, perchlorate and hydrogen sulphate had been chosen. In dependence on chain length and anion type transition temperatures from 20 to 100 °C were observed. Mass specific solid-solid transition enthalpies reach values of 185 J g⁻¹, which makes this class of substances attractive for heat storage applications. The influence of anion type on the transition enthalpies is explained in terms of packing requirements, hydrogen bond network formation and contributions from hindered anion rotation.     

From orientation disordered to ordered—An ab initio simulation on ammonia borane phase transition within van der Waals corrections

In this work, we report a detailed theoretical investigation of the phase transition of ammonia borane (NH₃BH₃; AB), from a tetragonal I4mm ( ) phase with disordered orientation of hydrogen to an orthorhombic phase with Pmn2₁ ( ) symmetry, as a function of temperature based on Density Functional Theory calculations with semiempirical dispersion potential correction. We define a series of substructures with the NH₃BH₃ moiety always in C_3v symmetry and the partially occupied high temperature state can be described as a continuous transformation between these substructures. To understand the role of the van der Waals corrections to the physical properties, we use the empirical Grimme's dispersion potential correction (PBE‐D2). Both Perdew–Burke–Emzerhof (PBE) and PBE‐D2 functional yield almost the same energy sequence along the transition path. However, PBE‐D2 functional shows obvious advantage in describing the lattice parameters of AB. The rigid rotor harmonic oscillator approximation is used to compute the free energy and the entropies contribution along the transition pathway. With knowledge of free energy surfaces along rotations of the ? [NH₃] and ? [BH₃] groups, complete transformation paths are mapped out. The phase transition is found to follow the sequence of partially occupied tetragonal system (I4mm) of a mixture of states with monoclinic (Cc), (CM) and orthorhombic (Pmn2₁) symmetries to fully occupied quasitetragonal system (the intermediate phase, Pmn2₁) to fully occupied orthorhombic system (Pmn2₁). © 2014 Wiley Periodicals, Inc.     

DSC study of melting and glass transition in gelatins

In the range from –50° to +130°C, the temperature dependence of the heat capacity for different kinds of gelatins with water contents of from 2 to 95% was studied by the DSC method. It was shown that, in all studied cases, metastable collagen-like structures are formed in gels or crystalline gelatins, with thermodynamic parameters depending on the formation conditions. The characteristic properties of the glass transitions in amorphous gelatins and crystalline gelatins with different melting heats and different contents of the ordered phase were established. Special attention is paid to the structural properties of free and bound water. The dependence of the glass transition temperatureT _g on the bound water content was shown to be of general applicability for many denatured biopolymers. Free water in gelatins, in distinction to the bound water, does not act as a plasticizer, but forms a rigid matrix inhibiting the glass transition.

---

Zusammenfassung Mittels DSC wurde im Bereich –50° bis +130°C die Temperaturabhängigkeit der Wärmekapazität für verschiedene Arten von Gelantine mit einem Wassergehalt von 2 bis 95% untersucht. Es wurde gezeigt, daß in allen untersuchten Fällen metastabile kollagenähnliche Strukturen in Gelen oder kristallinen Gelantinen gebildet werden, deren thermodynamische Parameter von den Bildungsbedingungen abhängen. Es wurden die charakteristischen Eigenschaften der Glasumwandlungen in amorphen Gelantinen und kristallinen Gelantinen mit unterschiedlichen Schmelzwärmen und einem unterschiedlichen Gehalt an geordneter Phase bestimmt. Spezielle Aufmerksamkeit wurde den strukturellen Eigenschaften von freiem und gebundenem Wasser gewidmet. Es wurde gezeigt, daß die Ab-hängigkeit der GlasumwandlungstemperaturT _g vom Gehalt an gebundenem Wasser generell für viele denaturierte Biopolymere anwendbar ist. Im Unterschied zu gebundenem Wasser fungiert freies Wasser in Gelatinen nicht als ein Weichmacher, bildet aber eine starre Matrix, die die Glasumwandlung verhindert.

     

Stability of hydrogen bonds upon polymerization and color transition of diacetylenes: An FTIR spectroscopy study

FTIR spectra (400–7500 cm⁻¹) have been recorded for polycrystalline films and single crystals of the diacetylene 4BCMU in the monomer, blue and red polymer states, and of 3BCMU monomer. Particular attention was paid to the amide bands associated to the urethanes in the side groups, which form one-dimensional H-bond linear chains quite similar to those found in peptides and proteins. The positions and strengths of these absorptions are practically unchanged by polymerization or blue to red polymer color transition. This suggests that the H-bond linear chains are the main constitutive interactions in these crystals, and that the conjugated parts must and do “adapt” to the unchanged H-bond lines. No evidence of side group disordering was observed at the irreversible blue to red transition in poly-4BCMU crystal.