Solid-phase synthesis of novel hybrid opiates

An efficient solid-phase synthesis of some novel hybrid opiates, consisting of part peptide and part alkaloid, connected together through a hydrazone linkage is reported. NMR studies show the E to Z isomerization of the hydrazone bond.     

A novel synthesis of organic diselenapolysulfides

A family of organic polychalcogenides with a common structure of RSeS_xSeR (with x=1, 2, 3 and R=CH₃, Ph, PhCH₂, O₂NC₆H₄CH₂) as well as cyclic 5,5-dimethyl-1,2-dithia-3,7-diselenacycloheptane were synthesized in good yield and high purity from the reaction of Ph₃CS_xCl with corresponding diselenides in chloroform at room temperature. Mechanistic aspects of the insertion involving the formation of an intermediate (RSeS_xCPh₃) are discussed.     

Enforcing periodic secondary structures in hybrid peptides: a novel hybrid foldamer containing periodic gamma-turn motifs

This note describes the design, synthesis, and conformational studies of a novel hybrid foldamer that adopts a definite compact, three-dimensional structure determined by a combined effect of the special conformational properties of the foldamer constituents. The striking feature of this de novo designed foldamer is its ability to display periodic gamma-turn conformations stabilized by intramolecular hydrogen bonds. Conformational investigations by single-crystal X-ray studies, solution-state NMR, and ab initio MO theory at the HF/6-31G* level strongly support the prevalence of gamma-turn motifs in both the di- and tetrapeptide foldamers, which are presumably stabilized by bifurcated hydrogen bonds in the solid and solution states. The strategy disclosed herein for the construction of hybrid foldamers with periodic gamma-turn motifs has the potential to significantly augment the conformational space available for foldamer design with diverse backbone structures and conformations.     

Controlled solvothermal synthesis of novel organic functionalized polyoxovanadates

Four novel organic functionalized polyoxovanadates are solvothermally synthesized by altering the reaction temperature and using different organoarsonic acids. These POVs are fully characterized and the phase transitions between different POVs structures are confirmed by X-ray diffraction analyses. Such a transition is temperature-dependent and thus controlled synthesis of new POVs can be achieved.     

Polystyrene-graft-polyglycerol resins: a new type of high-loading hybrid support for organic synthesis

The preparation of a dendritic graft polymer by a very efficient synthesis of polyglycerol directly on a polystyrene resin is presented. This one-step process can be performed on a multigram scale to provide a chemically stable polymeric support. The resulting hybrid polymers were fully characterized by diverse analytical methods (NMR, IR, ESEM, UV detection of cleaved protecting groups, and mass-spectrometric methods). They combine a high loading capacity (up to 4.3 mmol g(-1)) with good swelling properties in a wide range of solvents (including water), which is the major drawback for many existing solid phase supports. In comparison to the widely employed PEGylated resins, these hybrid materials offer a 10-fold higher loading capacity. Their suitability as supports for organic synthesis and for the immobilization of reagents has been demonstrated. These materials also swell in water, and consequently, it should be possible to use these new hybrid materials for synthesis in protic solvents.     

Convenient synthesis of novel fluorinated polyurethane hybrid latexes and core-shell structures via emulsion polymerization process with self-emulsification of polyurethane

Novel fluorinated polyurethane hybrid latexes in the size range of 40–50 nm, fluoroalkyl acrylate as fluorinated monomers, with various fluorine content (F% = 9∼26 wt%) were successfully prepared via emulsion polymerization process without traditional emulsifier. The waterborne polyurethane, which was synthesized by using isophronediisocyanate, dimethylol propionic acid, polyethylene glycols, etc., served not only as copolymerizable macromonomer but also as polymeric high molecular weight emulsifier. The structures of polyurethane macromonomer and fluorinated polyurethane were characterized by Fourier transform infrared and H¹-NMR. Particle size, zeta potential, micromorphology of the latex par.ticles, and surface properties were investigated by dynamic light scattering, potential particle size analyzer, transmission electron microscopy, and contact angle measurement, respectively. Results illustrated that the advantage of this process is that the size of fluorinated polyurethane hybrid particle is less sensitive to the composition. Furthermore, it was showed that fluorinated polyurethane latex particles had core-shell structures, especially when the content of fluorine was 26.08 wt%. Moreover, there was an obvious migration of fluorinated groups to the surface during the formation of fluorinated polymer films, although fluorinated groups were covered by polyurethane in latex particles.     

Surface-functionalised nano-beads as novel supports for organic synthesis

A novel polymer support has been prepared in which functional link points are located on the surface of polymer nano-beads; the use of the support has been demonstrated in the syntheses of unsymmetrical porphyrins.     

Enynones in organic synthesis. III. A novel synthesis of phenols

Enynones are converted to phenols by an acid catalyzed process which can be controlled to give either of two regioisomeric series of products.     

Metal carboxylate-phosphonate hybrid layered compounds: synthesis and single crystal structures of novel divalent metal complexes with N-(phosphonomethyl)iminodiacetic acid

Two novel divalent metal complexes with N-(phosphonomethyl)iminodiacetic acid, H(2)O(3)PCH(2)N(CH(2)CO(2)H)(2) (H(4)PMIDA), [Co(2)(PMIDA)(H(2)O)(5)] x H(2)O, 1, and [Zn(2)(PMIDA)(CH(3)CO(2)H)] x 2H(2)O, 2, have been synthesized and structurally characterized. The structure of complex 1 features two different kinds of Co(II) layers, namely, a cobalt phosphonate layer along the <100> plane and a cobalt carboxylate layer along the <300> plane. The Co(II) atoms in the phosphonate layer are octahedrally coordinated by 4 aqua ligands and 2 oxygen atoms from two phosphonic acid groups. Two Co(II) octahedra are bridged by a pair of phosphonic groups into a dimeric unit, and such dimers are interconnected into a layer through hydrogen bonding between aqua ligands. The Co(II) atoms in the carboxylate layer are octahedrally coordinated by a chelating PMIDA ligand, one aqua ligand, and one phosphonic oxygen atom from the neighboring PMIDA ligand. These Co(II) octahedra are interlinked by bridging carboxylic groups into a one-dimensional chain along the c-axis; such chains are held together by hydrogen bonds formed between carboxylic oxygen atoms and lattice water molecules, in such a way as to form a layer along the <300> direction. Two such layers are interconnected into a double layer via hydrogen bonding. These double layers are further interconnected with the Co(II) phosphonate layers through phosphonate tetrahedra along the a direction, resulting in the formation of a complicated three-dimensional network. The crystal structure of 2 contains a metal phosphonate and metal carboxylate hybrid layer along the <202> plane. One of the two zinc atoms in the asymmetric unit is tetrahedrally coordinated by four oxygen atoms from two phosphonic acid groups and two carboxylic groups; the other zinc atom is 5-coordinated by three oxygen atoms and a nitrogen atom from a chelating PMIDA ligand and one oxygen atom from the acetic acid. The above two types of zinc metal ions are interconnected by bridging carboxylic and phosphonic groups, resulting in the formation of a layered structure.     

"Inosaminoacids": novel inositol-amino acid hybrid structures accessed by microbial arene oxidation

Microbial 1,2-dihydroxylation of sodium benzoate permits the rapid construction of novel inositol-amino acid hybrid structures. Both β- and γ-amino acids are accessible by means of an acylnitroso Diels-Alder cycloaddition.     

Organostannoxane-supported multiferrocenyl assemblies: synthesis, novel supramolecular structures, and electrochemistry

Organostannoxane-based multiredox assemblies containing ferrocenyl peripheries have been readily synthesized by a simple one-pot synthesis, either by a solution method or by room-temperature solid-state synthesis, in nearly quantitative yields. The number of ferrocenyl units in the multiredox assembly is readily varied by stoichiometric control as well as by the choice of the organotin precursors. Thus, the reaction of the diorganotin oxides, R2SnO (R = Ph, nBu and tBu) with ferrocene carboxylic acid affords tetra-, di-, and mononuclear derivatives [{Ph2Sn[OC(O)Fc]2}2] (1), [{[nBu2SnOC(O)Fc]2O}2] (2), [nBu2Sn{OC(O)Fc}2] (3), [{tBu2Sn(OH)OC(O)Fc}2] (4), and [tBu2Sn{OC(O)Fc}2] (5) (Fc = eta(5)C5H4-Fe-eta(5)C5H5). The reaction of triorganotin oxides, R3SnOSnR3 (R = nBu and Ph) with ferrocene carboxylic acid leads to the formation of the mono-nuclear derivatives [Ph3SnOC(O)Fc] (6) and [{nBu3SnOC(O)Fc}(n)] (7). Molecular structures of the compounds 1-4 and 6 have been determined by single-crystal X-ray analysis. The molecular structure of compound 1 is new among organotin carboxylates. In this compound, ferrocenyl carboxylates are involved in both chelating and bridging coordination modes to the tin atoms to form an eight-membered cyclic structure. In all of these compounds, the acidic protons of the cyclopentadienyl groups are hydrogen bonded to the carboxylate oxygens (C-HO) to form rich supramolecular assemblies. In addition to this, pi-pi, T-shaped, L-shaped, and side-to-face stacking interactions involving ferrocenyl groups also occur. Compound 6 shows an interesting and novel intermolecular CO2-pi stacking interaction. Electrochemical analysis of the compounds 1-4, 6, and 7 shows a single, quasi-reversible oxidation peak corresponding to the simultaneous oxidation of four, two, and one ferrocenyl substituents, respectively. Compound 5 shows two quasi-reversible oxidation peaks. This is attributed to the positional difference among the ferrocenyl substituents on the tin atom. Additionally, while compounds 2 and 4 are electrochemically quite robust and do not decompose even after ten continuous CV cycles, compounds 1, and 3, 5-7 start to show decomposition after five cycles.     

Triphenylbismuth diacylates as novel reagents for fine organic synthesis

Triphenylbismuth diacylates, Ph₃Bi(O₂CR)₂ (R = Me, Et, Ph, CF₃, CH=CH₂), are novel effective reagents for fine organic synthesis. They oxidize primary and secondary alcohols and di-tert-glycols under mild conditions to form the corresponding carbonyl compounds in high yields;O- andN-phenylate alcohols, enols, and amines; andO- ando-C-phenylate phenols.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2043–2047, December, 1993.     

Optimised hydrothermal synthesis of multi-dimensional hybrid coordination polymers containing flexible organic ligands

In this paper, we summarise our recent research interest in the hydrothermal synthesis and structural characterisation of multi-dimensional coordination polymers. The use of N-(phosphonomethyl)iminodiacetic acid (also referred to as H₄pmida) in the literature as a versatile chelating organic ligand is briefly reviewed. This molecule plays an important role in the formation of centrosymmetric dimeric [V₂O₂(pmida)₂]⁴⁻ anionic units, which were first used by us as building blocks to construct novel coordination polymers. Starting with [V₂O₂(pmida)₂]⁴⁻ in solution, we have isolated [M₂V₂O₂(pmida)₂(H₂O)₁₀] species (where M²⁺ = Mn²⁺, Co²⁺ or Cd²⁺) via the hydrothermal synthetic approach, which were then employed for the construction of [CdVO(pmida)(4,4′-bpy)(H₂O)₂]·(4,4′-bpy)_0.5·(H₂O), [CoVO(pmida)(4,4′-bpy)(H₂O)₂]·(4,4′-bpy)_0.5, [Co(H₂O)₆][CoV₂O₂(pmida)₂(pyr)(H₂O)₂]·2(H₂O) and [Cd₂V₂O₂(pmida)₂(pyr)₂(H₂O)₄]·4(H₂O) by the inclusion of bridging organic ligands in the reactive mixtures, such as pyrazine (pyr) and 4,4′-bipyridine (4,4′-bpy). These materials can contain channel systems, and exhibit magnetic behaviour, not only due to the V⁴⁺ centres but also to the transition metal centres which establish the links between neighbouring dimeric [V₂O₂(pmida)₂]⁴⁻ anionic units. A closely related anionic moiety, [Ge₂(pmida)₂(OH)₂]²⁻, was engineered to allow the study of such crystalline hybrid materials using one- and two-dimensional high-resolution solid-state NMR.     

Isomeric organic ligand dominating polyoxometalate-based hybrid compounds: synthesis and as electrocatalysts and pH-sensitive probes

By introducing isomeric organic ligands into polyoxometalate (POM) systems, two new POM-based hybrid compounds, [Cu₆(m-pyttz)₂(H₂O)][HPMo₁₂O₄₀] (1) and [Ag₃(p-H₂pyttz)(p-Hpyttz)Cl][H₂PMo₁₂O₄₀]·6H₂O (2) (m-/p-H₂pyttz = 3-(pyrid-3/4-yl)-5(1H-1,2,4-triazol-3-yl)-1,2,4-triazolyl), have been hydrothermally synthesized and characterized. Single-crystal structural analysis shows the m-pyttz ligands link Cu^I ions to generate a two-dimensional layer with hanger-like rhombus, which is pillared by the PMo₁₂ anions in 1. Compound 2 exhibits a three-dimensional supramolecular framework, in which PMo₁₂ anions are building blocks facilitating the extension of the whole structure. The influence of the coordination modes of m-/p-H₂pyttz on the structures is discussed in detail. Furthermore, electrochemical properties of 1 and 2 have been studied and they display excellent electrocatalytic activities toward the reduction of nitrite and hydrogen peroxide and pH-dependent electrochemical behaviors.     

A liquid-phase approach to functionalized Janus dendrimers: novel soluble supports for organic synthesis

A new kind of functionalized Janus dendrimer has been synthesized via a liquid-phase approach, which could easily be purified using a simple precipitation method without the need for chromatographic separation. Their use for liquid-phase organic synthesis has been achieved in the Pd-catalyzed Suzuki coupling reactions, giving biaryl products in excellent yields after cleavage.     

New lead inorganic-organic hybrid microporous and layered materials: synthesis,properties, and crystal structures

Two new lead(II) phosphonates, namely, Pb2[PMIDA]*1.5H2O (1) (H4PMIDA = H2O3PCH2N(CH2CO2H)2) and Pb(H2L) (2) (H4L = CH3N(CH2PO3H2)2), have been synthesized by hydrothermal reactions at 150 degrees C. Complex 1 crystallized in tetragonal P42/n with cell dimensions of a = 17.317(7) and c = 7.507(5) A and Z = 8. In complex 1, Pb(1) is 6-coordinated by chelation in a tetradentate fashion by a PMIDA ligand (3 O, 1 N) and two phosphonate oxygen atoms from neighboring Pb(PMIDA) units in a severely distorted octahedral geometry, whereas Pb(2) is 6-coordinated by 4 carboxylate and 2 phosphonate oxygen atoms also with a severely distorted octahedral environment. These two different types of Pb(II) ions are interconnected through bridging carboxylate and phosphonate groups, resulting in a 3D network with micropores, whose cavity is filled by lattice water molecules interlinked via hydrogen bonds. Each PMIDA ligand bridges with 8 Pb(II) ions (3 Pb(1) and 5 Pb(2)). Complex 2 is orthorhombic, P2(1)2(1)2(1), with a = 7.382(5), b = 7.440(6), and c = 30.75(2) A and Z = 8. The structure of 2 features a 2D double lead(II) phosphonate layer along the ab plane. Each lead(II) ion is 5-coordinated by five phosphonate oxygen atoms from four ligands in a distorted trigonal bipyramid geometry. These double layers are further interconnected via hydrogen bonds between the protonated and uncoordinated phosphonate oxygens along the c-axis.     

Selective synthesis of a novel glycoluril-based hybrid compound with high application potential

Chemistry of Heterocyclic Compounds - Highly selective synthesis of a new antipyrine-substituted tetracycle was implemented on the basis of a modified Mannich reaction as a result of the...     

Editorial:Green organic synthesis

正In 1998,Paul Anastas and John Warner defined 12 Principles of Green Chemistry,aiming at cleaner processes,safer products and increasing use of renewable rather than fossil resources.With the growing awareness of environmental issues,the international chemical community is driven to develop novel and environmentally friendly synthetic strategies for the replacement of inefficient and pollutional chemical processes.Delightedly,a lot of ecofriendly synthetic methodologies have been established over the past decades.