Transsilylation of disilazanes with 1-chloro-1-methyl-1-silacyclobutane and other triorganylchlorosilanes

The first stage of the reaction of hexamethyldisilazane with 1-chloro-1-methyl-1-silacyclotmtane gives 1,3,3,3-tetramethyl-1,1-trimethylenedisilazane, and after that 1,3-dimethyl-1,3-bis(trimethylene)disilazane is formed. The latter reacts with 1-chloro-1-methyl-1-silacyclobutane to give tris[methyl(trimethylene)silyl] amine. From a large number of examples it is shown that transsilylation of disilazanes with chlorosilanes is a general reaction.     

1:1 alternating copolymers of 1-bicyclobutanecarbonitrile with styrene

High molecular weight, 1:1 alternating copolymers of 1-bicyclobutanecarbonitrile with styrene were prepared in tetramethylenesulfone solution by complexing the electron-poor bicyclobutane monomer with zinc chloride. Methyl 1-bicyclobutanecarboxylate under these conditions gave copolymers containing a slight excess of styrene units (ratio 1:1.3 to 1:1.8). High molecular weight homopolymers of 1-bicyclobutanecarbonitrile and of methyl 1-bicyclobutanecarboxylate were prepared similarly. The tendency of the bicyclobutane nitrile to form 1:1 alternating copolymers is as great as that of its vinyl analog, acrylonitrile, and the synthesis of other alternating copolymers from this monomer should be possible.     

Electronic, vibrational, and rotational structures in the S0 1A1 and S1 1A1 states of phenanthrene

Electronic and vibrational structures in the S(0) (1)A(1) and S(1) (1)A(1) states of jet-cooled phenanthrene-h(10) and phenanthrene-d(10) were analyzed by high-resolution spectroscopy using a tunable nanosecond pulsed laser. The normal vibrational energies and molecular structures were estimated by ab initio calculations with geometry optimization in order to carry out a normal-mode analysis of observed vibronic bands. The rotational structure was analyzed by ultrahigh-resolution spectroscopy using a continuous-wave single-mode laser. It has been demonstrated that the stable geometrical structure is markedly changed upon the S(1) ← S(0) electronic excitation. Nonradiative internal conversion in the S(1) state is expected to be enhanced by this structural change. The observed fluorescence lifetime has been found to be much shorter than the calculated radiative lifetime, indicating that the fluorescence quantum yield is low. The lifetime of phenanthrene-d(10) is longer than that of phenanthrene-h(10) (normal deuterium effect). This fact is in contrast with anthracene, which is a structural isomer of phenanthrene. The lifetime at the S(1) zero-vibrational level of anthracene-d(10) is much shorter than that of anthracene-h(10) (inverse deuterium effect). In phenanthrene, the lifetime becomes monotonically shorter as the vibrational energy increases for both isotopical molecules without marked vibrational dependence. The vibrational structure of the S(0) state is considered to be homogeneous and quasi-continuous (statistical limit) in the S(1) energy region.     

1-Phenyl-1-halo-1-silacyclohexanes

The approaches to synthesis of 1-phenyl-1-halo-1-silacyclohexanes C₅H₁₀Si(Ph)X (X = F, Cl, Br) have been examined. 1-Phenyl-1-chloro-1-silacyclohexane has been prepared via the known reaction of phenyltrichlorosilane with dimagnesium derivative of 1,5-dibromopentane; up to 20% of 1-bromo-1-phenyl-1-silacyclohexane admixture is formed along with the target product. The minor product formation has been prevented using an alternative method of chlorination of 1-phenyl-1-silacyclohexane with N-chlorosuccinimide. 1-Phenyl-1-fluoro-1-silacyclohexane has been obtained in close to quantitative yield via the reaction of 1-phenyl-1-chloro-1-silacyclohexane with SbF₃ and in 70% yield via its reaction with HF. The synthesis of 1-phenyl-1-bromo-1-silacyclohexane via bromination of 1-phenyl-1-chloro-1-silacyclohexane with N-bromosuccinimide has given the target product as a minor one, the major product being disiloxane formed due to hydrolysis of the Si–Br bond.     

1, 1-Difluoro-1H-cyclopropa[a]naphthalene

1, 1-Difluorocyclopropa[a]naphthalene ( 1b ) is prepared in three steps from 4-bromo-1,2-dihydronaphthalene ( 7 ) via carbene addition, benzylic bromination and bidehydrohalogenation. Structural evidence for formation of 1b is based on ¹H- and ¹⁹F-NMR spectroscopy. Compound 1b is stable in solution at ?30°. Upon reaction with MeOH/H⁺ it is converted to a 1:2 mixture of 1- and 2-methylnaphthoate ( 10 and 11 , respectively).     

Chemoselective 1-ethylpiperidine hypophosphite (EPHP)-mediated intermolecular radical additions of 1-deoxy-1-halo-1-iodo-alditols to electron-deficient olefins

The chemoselective radical reduction of the iodine atom in a series of 1-deoxy-1-halo-1-iodo-alditols with the 1-ethylpiperidine hypophosphite (EPHP)/AIBN system is described. EPHP is also a good chain carrier for the radical addition of gem-dihalocompounds to electron-deficient olefins. Thus, the synthesis of 4-halo-glycooctononitriles and 4-halo-glycoheptononitriles can be achieved by an intermolecular addition of the 1-deoxy-1-halo-alditol-1-yl radical intermediate to acrylonitrile.     

Structural signature of the MYPT1-PP1 interaction

Muscle relaxation is triggered by the dephosphorylation of Ser19 in the myosin regulatory light chain. This reaction is catalyzed by the holoenzyme myosin phosphatase (MP), which includes the catalytic subunit protein phosphatase 1 (PP1) and the regulatory targeting subunit (MYPT). MYPT1 (myosin phosphatase targeting subunit 1) is responsible for both targeting the holoenzyme to subcellular compartments in the muscle and directing PP1 specificity toward myosin. To understand the molecular events leading to the MYPT1-PP1 holoenzyme formation, we used NMR spectroscopy to determine the structural and dynamic characteristics of unbound MYPT1. This allowed the conformations of MYPT1 in the free, unbound state to be directly compared to the PP1-bound state. Our results show that MYPT1(1-98) behaves like a two-domain protein in solution. The first 40 residues of MYPT1(1-98), the disordered region, are intrinsically disordered and highly dynamic, whereas residues 41-98, the folded ankyrin-repeat region, are well-structured and rigid. Furthermore, the integrated use of NMR and biophysical data enabled us to calculate an ensemble model for MYPT1(1-98). The most prominent structural feature of the MYPT1(1-98) ensemble is a 25% populated transient α-helix in the disordered region of MYPT1(1-98). This α-helix becomes fully populated when bound to PP1 and, as we show, likely plays a central role in the formation of the MYPT1-PP1 holoenzyme complex. Finally, this combined analysis shows that the structural and dynamic behaviors exhibited by MYPT1 for PP1 are distinct from those of any other previously analyzed PP1 regulatory protein. Collectively, these data enable us to present a new model of the molecular events that drive MYPT1-PP1 holoenzyme formation and demonstrate that there are structural differences in unbound PP1 regulators that have not been previously observed. Thus, this work adds significant insights to the currently limited data for molecular structures and dynamics of PP1 regulators.     

Liquid-phase oxidation of 1-acetyl cyclopentene-1

Conclusions Liquid-phase oxidation of 1-acetyl cyclopentene-1 leads to formation of a complex mixture of substances among which 3-acetyl cyclopentene-2-on-1 is found.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 3, pp. 699–700, March, 1970.     

Solution conformations of mycothiol bimane, 1-D-GlcNAc-alpha-(1 --> 1)-D-myo-Ins and 1-D-GlcNAc-alpha-(1 --> 1)-L-myo-Ins

Mycothiol is an abundant small molecular weight thiol found only in actinomycetes, which include mycobacteria. Mycothiol biosynthetic and detoxification enzymes are novel and unique to actinomycetes, thereby representing potential antimycobacterial targets. To better guide inhibitor design, we have determined by NMR the solution conformations of mycothiol bimane (MSmB) and the pseudodisaccharide 1-D-GlcNAc-alpha-(1 --> 1)-D-myo-Ins (D-GI), molecules that represent the natural substrates for the mycothiol-dependent detoxification enzyme mycothiol-S-conjugate amidase (MCA) and the mycothiol biosynthetic enzyme D-GlcNAc-alpha-(1 --> 1)-D-myo-Ins deacetylase (AcGI deacetylase), respectively. Comparison of the mean structure of MSmB and the energy-minimized structures of two competitive spiroisoxazoline-containing MCA inhibitors shows striking similarities between these molecules in the region of the scissile amide bond of MSmB and provides structural evidence that those inhibitors are substrate mimics. Owing to our earlier finding that AcGI deacetylase will not deacetylate the unnatural isomer 1-d-GlcNAc-alpha-(1 --> 1)-L-myo-Ins (L-GI), the solution conformation of L-GI was also determined. The interglycosidic bond angles for all three compounds are comparable. When considered together with the observation that a simplified cyclohexyl thioglycoside mycothiol analogue is a good substrate for MCA, it appears that the stereochemistry of the inositol ring is critical for deacetylase function, superceding the importance of the full complement of hydroxyl groups on the "nonreducing" ring.     

Thermolysis of 1-(1-aryl-1-bromomethyl)cyclopropyl bromides: a reinvestigation

Two compounds, the (Z)- and (E)-isomers of 2,4-dibromo-1-p-tolyl-1-butene 2a and 3a, respectively, were isolated in 65% total yield when 1-(1-bromo-1-p-tolylmethyl)cyclopropyl bromide (1a) was heated at 150 degrees C for 1 h. 1,1-Dibromo-2-p-tolylcyclobutane (4a), previously reported to be the only product in this reaction, was not detected. The phenyl analogue of 1a reacted similarly and gave the (Z)- and (E)-isomers of 2,4-dibromo-1-phenyl-1-butene 2b and 3b, respectively, in 60% yield. A rationale for the reaction is presented.     

Transformation of Phosphaalkynes into 1H- and 2H-Phosphirenes1

Abstract

The 2H-phosphirene 4 is synthesized from the spirocyclic 3H-1,2,4-diazaphosphole 1 by low temperature photolysis. The isomeric 1H-phosphirenes 7 are formed by a [2+1]-cycloaddition process of chlorocarbenes, generated from diazirines. onto the triple bond of phosphaalkynes. When the 1-chlon-1H-phosphirenes 7 are allowed to react with a series of nucleophiles substitution occurs yielding the 1H-phosphirenes 9, 11 and 12. The existance of a phosphirenium cations, for instance 13 is discussed.     

The potentials of zero charge of Pd(1 1 1) and thin Pd overlayers on Au(1 1 1)

The potential of zero charge (pzc) of Pd(1 1 1) has been determined in dilute NaF solutions by measuring the Gouy–Chapman minimum of the double-layer capacity. For a massive Pd(1 1 1) single crystal electrode a pzc of −0.12 V vs. SCE has been found. The corresponding values for thin Pd(1 1 1) overlayers on Au(1 1 1) have also been determined. While the pzc of the first, pseudomorphic Pd layer on Au(1 1 1) is −0.09 V vs. SCE, the pzc of a five monolayers thick Pd film on Au(1 1 1) is practically identical to the pzc of the massive Pd(1 1 1) electrode. By comparing pzc's and work functions for Au(1 1 1) and Pd(1 1 1), the dipole contribution to the potential drop across the Pd(1 1 1)/water interface is estimated.     

Comparative theoretical study of the structure and bonding of propyne on the Pt(1 1 1) and Pd(1 1 1) surfaces

The interaction of propyne with the Pt(1 1 1) and Pd(1 1 1) surfaces has been studied by means of the generalised gradient approach of density functional theory using periodic slab models. For both surfaces, the most stable adsorption mode of propyne is di-σ/π mode where the hydrocarbon is σ-bonded to two metal atoms with some additional π bonding to a third adjacent surface atom. The adsorption geometry is a highly distorted propyne with the C₁ and C₂ in a nearly sp² hybridisation. Two equivalent surface structures have been found on Pt and Pd. These correspond to the adsorption on the fcc or hcp hollow sites. The adsorption energies on Pt(1 1 1) and Pd(1 1 1) are predicted to be ∼−197 and −161 kJ mol⁻¹, respectively. The electronic factors that control the chemisorption have been analysed by means of the projected density of states.     

Synthesis of labeled 1-amino-2-methylenecyclopropane-1-carboxylic acid, an inactivator of 1-aminocyclopropane-1-carboxylate deaminase

1-Amino-2-methylenecyclopropane-1-carboxylic acid (2-methylene-ACC) is an irreversible inhibitor for a bacterial enzyme, 1-aminocyclopropane-1-carboxylate (ACC) deaminase, which catalyzes the conversion of ACC to alpha-ketobutyrate and ammonia. The inactivation has been proposed to proceed with the ring scission induced by an addition of an enzyme nucleophile, resulting in the formation of a reactive turnover product that then traps an active-site residue. To gain further insight into this unique enzymatic reaction, the tritiated 2-methylene-ACC was prepared and incubated with ACC deaminase to locate and identify the entrapped amino acid residue. The synthesis of this radiolabeled compound and the results of its incubation with ACC deaminase are reported in this paper.     

Rhodium-catalyzed regio- and stereoselective 1-seleno-2-thiolation of 1-alkynes

Rhodium complex RhH(PPh(3))(4) and 1,1'-bis(diphenylphosphino)ferrocene catalyze the regio- and stereoselective additions of diaryl disulfides and diaryl diselenides to 1-alkynes giving (Z)-1-arylseleno-2-arylthio-1-alkenes. The catalyst promotes the addition reaction of dibutyl disulfide and dibutyl diselenide to 1-octyne with a similar selectivity giving (Z)-1-butylseleno-2-butylthio-1-octene but with a lower catalytic activity. The same product is obtained with a higher yield, when excess dibutyl disulfide is used against dibutyl diselenide in the presence of RhH(PPh(3))(4) and 1,4-diphenylphosphinobutane.     

Construction of N-1H,1H-perfluoroalkylated peptide bonds

The preparation of a variety of optically pure peptides containing an N-1H,1H-perfluoroalkyl label on a selected backbone amide bond is now possible.     

1-Chlor-1-phosphirane

The title compounds are prepared by reaction of disubstituted diazomethanes with 1-chloro-2-phenyl-2-trimethylsilyl-1-phosphaalkene. The chemistry of the 1-chloro-1-phosphiranes is described.     

Gas permeation properties of blend and copolymer membranes composed of 1-trimethylsilyl-1-propyne and 1-phenyl-1-propyne structures

The poly(1-trimethylsilyl-1-propyne) (PMSP) has the potential to be an important membrane gas separation material due to the fact that it has the highest gas permeability of all polymeric membranes. One problem with PMSP is a decrease in the gas permeability with age. In order to understand the aging processes, we studied the change in free volume and the molecular motions of the PMSP and its membranes modified with 1-phenyl-1-propyne (PP) structures; that is, a copolymer and a blend of PMSP and PPP. During aging, the unrelaxed volume of the PMSP membrane was relaxed, and the molecular motion of carbons dropped, suggesting that the decrease in the microvoids caused a tighter chain packing. The copolymer and blend membrane had stable permeability compared to the PMSP. In particular, the addition of a small amount of the PP structure provided excellent stability with high gas permeability. A decrease in the unrelaxed volume of modified membranes was hardly observed with age; however, the molecular motion of some carbons slightly changed. This change did not affect the gas permeability. In this case, a larger unrelaxed volume was probably a dominant factor in the gas permeation of the PMSP rich membranes relative to the molecular motion in the T₁ measurement. © 1997 John Wiley & Sons, Inc.     

Acid-Catalyzed Isomerization of 1-Halo-2-Arylthioalk-1-Enes

1-Halo-2-arylthioalk-1-enes, the anti-Markovnikov adducts of 1,2-halosulfenylation of terminal alkynes containing propargyl hydrogen atoms, were found to transform into a mixture of E - and Z -isomers of 1-halo-2-arylthioalk-2-enes under acid catalysis conditions. A plausible mechanism of rearrangement is proposed. The Markovnikov adducts 2-halo-1-arylthioalk-1-enes were partially converted into their cis -form under similar conditions. The halosulfenylation products of 1-phenylpent-1-yne did not show the signs of double-bond migration in the presence of an acid; only partial isomerization of the E - to the Z -isomers took place.     

Synthesis and Evaluation of Serinolamide Derivatives as Sphingosine-1-Phosphate-1 (S1P1) Receptor Agonists

Sphingosine-1-phosphate-1 (S1P₁) receptor agonists are well-known drugs for treating multiple sclerosis (MS) caused by autoreactive lymphocytes that attack the myelin sheath. Therefore, an effective therapeutic strategy is to reduce the lymphocytes in the blood by inducing S1P₁ receptor internalization. We synthesized serinolamide A, a natural product of the sea, and performed S1P₁ receptor internalization assay to evaluate functionally antagonistic S1P₁ receptor agonist activity. In order to synthesize derivatives with better efficacy than serinolamide A and B, new derivatives were synthesized by introducing the phenyl ring moiety of fingolimod. Among them, compounds 19 and 21 had superior S1P₁ agonistic effects to serinolamide. We also confirmed that compound 19 effectively inhibited lymphocyte outflow in peripheral lymphocyte count (PLC) assay.