Toward efficient photomodulation of conjugated polymer emission: optimizing differential energy transfer in azobenzene-substituted PPV derivatives

We present fluorescence studies of quenching behavior in photoaddressable azobenzene-substituted derivatives of the fluorescent conjugated polymer poly(p-phenylenevinylene) (PPV). The azobenzene side chains partially quench the PPV fluorescence, and we have shown previously that the quenching efficiency is greater when the azobenzene side chains are cis than when they are trans. This effect provides a photoaddressable means of modulating the fluorescence intensity of PPV derivatives. To optimize the efficiency of photoinduced intensity modulation, it is important to understand the molecular nature of quenching by both trans- and cis-azobenzene side chains. Here we investigate the photophysical origins of quenching by the two isomers using steady-state and time-resolved fluorescence spectroscopy. We present results from the azobenzene-modified PPV derivative poly(2-methoxy-5-((10-(4-(phenylazo)phenoxy)decyl)oxy)-1,4-phenylenevinylene) (MPA-10-PPV) and two new related polymers, a copolymer lacking half of the azobenzene side chains and an analogue of MPA-10-PPV with a tert-butyl-substituted azobenzene. These studies reveal that steric interactions influence the extent of PPV emission quenching by trans-azobenzene but do not affect the efficient quenching by cis-azobenzene. The difference in dynamic quenching efficiencies between trans- and cis-azobenzene isomers is consistent with fluorescence resonance energy transfer. These results show that it is possible to control the efficiency of photoswitchable fluorescence modulation through specific structural variations designed to encourage or block quenching by trans-azobenzene. This is a promising approach to providing useful general guidelines for designing photomodulated PPV derivatives.     

Photoisomerization of azobenzene derivatives in nanostructured silica

A series of derivatized azobenzene molecules are synthesized such that one of the phenyl groups can be chemically bonded to mesostructured silica and the other, derivatized with dendrons, is free to undergo large-amplitude light-driven motion. The silica frameworks on which the motion takes place are either 150 nm thick films containing ordered hexagonal arrays of tubes (inner diameter about 2 nm) containing the bonded azobenzenes, or particles (about 500 nm in diameter) containing the same ordered arrays of functionalized tubes. The photoisomerization yields and the rate constants for the thermal cis to trans back-reaction of the azobenzenes in the tubes are measured and compared to those of the molecules in solution. The rate constants decrease with increasing size of the dendrons. Fluorescence spectra of the cis and trans isomers in the pores show that the photoisomerization in the nanostructured materials is selectively driven by specific wavelengths of light and is reversible.     

假1,2-二苯乙烯型偶氮苯合成、表征及其光致异构性能

合成系列假1,2-二苯乙烯型偶氮苯,利用FT-IR、NMR、ESI-MS和元素分析等技术手段确定目标化合物结构,并通过UV-Vis光谱研究其光致变色性能,测定其溶液态光致顺反异构速率常数,同时考察其在聚甲基丙烯酸甲酯掺杂薄膜中抗疲劳性能,结果表明,目标化合物在乙酸乙酯中π-π^*能级低于n-π^*能级,且两个能级出现重叠,异构转变速率常数数量级10^-1~10⁰ s^-1,反→顺异构转变速率常数k_t受到偶极-偶极作用力和空间位阻效应影响,偶极-偶极作用力对单溴代物的k_t影响比二溴代物大,空间位阻效应对二溴代物的k_t影响比单溴代物大,顺→反异构转变速率常数k_c与k_t大小顺序相反,在聚甲基丙烯酸甲酯掺杂薄膜中有良好的抗疲劳性能。     

Structure control for fine tuning fluorescence emission from side-chain azobenzene polymers

New fluorescent azobenzene dyes and side-chain polymers have been synthesized and characterized and their photophysical properties studied. A series of azobenzene dyes having different fluorophores such as phenol (S1), phenylphenol (S2) and naphthol (S3) incorporated in them were synthesized. S2 had unusually high fluorescence with a quantum yield of phi f = 0.2 recorded in dichloromethane (DCM), whereas S1 and S3 were found to be weakly fluorescent. The azobenzene dyes were converted into methacrylate monomers having short ethyleneoxy spacers and then free radically polymerized. Phenylphenol-based azobenzene polymer (P2) continued to show fluorescence, whereas fluorescence was completely quenched in the case of phenol (P1)- and naphthol (P3)-based polymers. Phenylphenol, though twisted in the ground state is known to have a more planar geometry in the excited state--a factor that enables it to retain its fluorescence behavior even when it is incorporated as part of an azobenzene unit. In contrast, naphthol, which is a better fluorophore compared to phenylphenol, loses much of its emissive behavior upon coupling to the azobenzene unit. The extent of trans to cis photoisomerization in solution was very low (approximately 17%) for P2 after 30 min of continuous irradiation using 365 nm light, in contrast to approximately 40% for P1 under identical conditions. This is attributed to the steric repulsion brought about by the bulky phenylphenol units that restrict rotation. A 2-fold enhancement in fluorescence emission was observed for P2 upon irradiation by UV light at 360 nm, which relaxed to the original intensity in about 7 day's time. The higher emission of the cis azobenzenes is generally attributed to an inhibition of photoinduced electron transfer (PET) mechanism. The emission of P2 showed a concentration dependence which increased initially and then decreased in intensity with the formation of a new red-shifted peak at higher concentration due to aggregation. Irradiation of the fluorescence quenched highly concentrated (1 x 10(-3) M) sample of P2 showed an enhancement in emission from aggregates at 532 nm.     

Local free volume and structural relaxation studied with photoisomerization of azobenzene and persistent spectral hole burning in poly(alkyl methacrylate)s at low temperatures

The final extent of trans‐to‐cis photoisomerization of an azobenzene probe in various amorphous polymers has been used in previous studies for estimating local free volume and its fluctuation in polymer solids. However, there have been few studies on what kinds of molecular motion cause the fluctuation of local free volume at low temperatures. The onset of local structural relaxation (molecular motion) can be observed with temperature cycling experiments in persistent spectral hole burning (PSHB). Thus, in the present article, the fluctuation of local free volume observed in trans‐to‐cis photoisomerization of azobenzene is related to the local structural relaxation observed in PSHB for poly(alkyl methacrylate)s with various ester groups, i.e., methyl (PMMA), ethyl (PEMA), n‐propyl (PnPMA), isopropyl (PiPMA), and isobutyl (PiBMA) groups. In the final cis fraction, rapid decrease, from 20 to 4 K in PEMA, PnPMA, and PiPMA, and from 86 to 20 K in PiBMA, is observed. These temperature regions of the rapid decrease in final cis fraction in these polymers agree well with those where the hole width in PSHB temperature cycling experiments begins to increase for the same polymers. For example, PEMA begins its ester ethyl group rotation at 17 K, which was primarily observed with PSHB, causing the drastic decrease in final cis fraction of azobenzene from 20 to 4 K. The final cis fractions at 4 K for these poly(alkyl methacrylate)s reflect the intrinsic sizes of the local free volume, except in the case of PMMA, and are compared with the reported results of positron annihilation lifetime measurements. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 3098–3105, 2000     

Self-assembled multilayers of photochromic bola-amphiphile and ionene-type oligomer: Relation of aggregate state and photoisomerization

Photoisomerization process of azobenzene has been studied in the multilayer assemblies of poly(vinylsulfate, potassium salt) and two different layer-elements; 4,4′-azobenzene-bis(12-trimethylammonium-N-yl dodecyloxy) dibromide (BA-12, 1) and an ionene oligomer, poly(4,4′-azobenzene-bis(12-dimethyl-ammonium-N-yl dodecyloxy) bromide) (PAZ-12, 2 ). The change of the photoactive layers from BA-12 to PAZ-12 was found to dramatically influence the photoisomerization characteristics of the azobenzene in the multilayer. Surprisingly, we have observed that the chromophore interaction in PAZ-12 is stronger than that in BA-12 in self-assembled (SA) film (λ_max = 320 nm compared to 341 nm), although the aggregate formation is considered to be hindered by the strains of the polymer chains. For BA-12/PVS and PAZ-12/PVS multilayers, the steady state between cis and trans isomers reached after ca 20 min. and 48 min. of UV irradiation, respectively. It was also found that after first one trans-cis-trans cycle of the photoisomerization, the trans to cis isomerization was completed in 30 sec of irradiation in the following 10 cycles without appearance of any fatigue in the multilayer film.     

侧基含偶氮苯生色团的短梗霉多糖的制备及光致变色性

利用4-(4-硝基苯偶氮)-1-萘酚的丙烯酸酯与短梗霉多糖进行接枝共聚,制备了侧基含偶氮苯生色团的短梗霉多糖聚合物,并用红外光谱、扫描电镜、X射线衍射、热重分析等手段对聚合物进行了表征.用紫外光谱研究了聚合物的光致变色性,结果表明聚合物具有良好的热稳定性和光致变色性.     

Probing highly efficient photoisomerization of a bridged azobenzene by a combination of CASPT2//CASSCF calculation with semiclassical dynamics simulation

Mechanism of phototriggered isomerization of azobenzene and its derivatives is of broad interest. In this paper, the S(0) and S(1) potential energy surfaces of the ethylene-bridged azobenzene (1) that was recently reported to have highly efficient photoisomerization were determined by ab initio electronic structure calculations at different levels and further investigated by a semiclassical dynamics simulation. Unlike azobenzene, the cis isomer of 1 was found to be more stable than the trans isomer, consistent with the experimental observation. The thermal isomerization between cis and trans isomers proceeds via an inversion mechanism with a high barrier. Interestingly, only one minimum-energy conical intersection was determined between the S(0) and S(1) states (CI) for both cis → trans and trans → cis photoisomerization processes and confirmed to act as the S(1) → S(0) decay funnel. The S(1) state lifetime is ～30 fs for the trans isomer, while that for the cis isomer is much longer, due to a redistribution of the initial excitation energies. The S(1) relaxation dynamics investigated here provides a good account for the higher efficiency observed experimentally for the trans → cis photoisomerization than the reverse process. Once the system decays to the S(0) state via CI, formation of the trans product occurs as the downhill motion on the S(0) surface, while formation of the cis isomer needs to overcome small barriers on the pathways of the azo-moiety isomerization and rotation of the phenyl ring. These features support the larger experimental quantum yield for the cis → trans photoisomerization than the trans → cis process.     

Photodynamics and time-resolved fluorescence of azobenzene in solution: a mixed quantum-classical simulation

We have simulated the photodynamics of azobenzene by means of the Surface Hopping method. We have considered both the trans → cis and the cis → trans processes, caused by excitation in the n → π* band (S(1) state). To bring out the solvent effects on the excited state dynamics, we have run simulations in four different environments: in vacuo, in n-hexane, in methanol, and in ethylene glycol. Our simulations reproduce very well the measured quantum yields and the time dependence of the intensity and anisotropy of the transient fluorescence. Both the photoisomerization and the S(1) → S(0) internal conversion require the torsion of the N═N double bond, but the N-C bond rotations and the NNC bending vibrations also play a role. In the trans → cis photoconversion the N═N torsional motion and the excited state decay are delayed by increasing the solvent viscosity, while the cis → trans processes are less affected. The analysis of the simulation results allows the experimental observations to be explained in detail, and in particular the counterintuitive increase of the trans → cis quantum yield with viscosity, as well as the relationship between the excited state dynamics and the solvent effects on the fluorescence lifetimes and depolarization.     

一代树状碳硅烷液晶的光化学研究－－端基含12个4－丁氧基氮苯介晶基元

研究了新的含12个丁氧基偶氮苯介晶基元的五代树状碳硅烷液晶D1及偶氮苯介 晶基元化合物M5在氯仿、四氢呋喃、N，N－二甲基甲酰胺、乙醇和苯等溶剂中的量 子产率、反－顺光异构化、光回复异构、反／顺异构组分比、热回复异构及活化能 。D1和M5的光致变色速率常数为10~(-1)s~(-1)，而含同一偶氮基元的光致变色液 晶聚硅氧烷的光致变色速率常数为10~(-8)s~(-1)，因此，液晶树状物D1的光响应 速度比后者快10~7倍。     

Correlation between the structure and wettability of photoswitchable hydrophilic azobenzene monolayers on silicon

Photoresponsive monolayers of hydrophilically substituted azobenzenes have been prepared by reaction on aminosilane monolayers on silicon surfaces. Grafting densities in the 0.2-1.0 molecule/nm(2) range were determined by X-ray reflectometry. The monolayers exhibit reversible photoisomerization, switching from a more hydrophilic trans state to a less hydrophilic cis state upon UV irradiation, in contrast with the usual behavior of most azobenzene monolayers that switch from a less to a more hydrophilic state. This indicates that the wettability is not dominated by the change in the dipole moment of the azobenzene moiety but originates from variations in the composition of the outer surface of the monolayers resulting from the reorientation of the substituent groups. The light-driven change in the water contact angle correlates linearly with the grafting density but remains small. However, the wettability contrast can be increased by forcing the molecules to stand in an improved vertical orientation, either by densifying the underlying aminosilane monolayer or by filling the voids left at the bottom of the layer of grafted azobenzene molecules.     

The kinetics of helix unfolding of an azobenzene cross-linked peptide probed by nanosecond time-resolved optical rotatory dispersion

The unfolding dynamics of a 16 amino acid peptide (Ac-EACAREAAAREAACRQ-NH(2), FK-11-X) was followed using nanosecond time-resolved optical rotatory dispersion (ORD). The peptide was coupled to an azobenzene linker that undergoes subnanosecond photoisomerization and reisomerizes on a time scale of minutes. When the linker is in the trans form, the peptide favors a more helical structure (66% helix/34% disordered) and when in the cis configuration the helical content is reduced. Unfolding of FK-11-X was rapidly triggered by a 7-ns laser pulse at 355 nm, forming cis azobenzene-linked peptides that maintained the secondary structure (helical or disordered) of their trans azobenzene counterparts. The incompatibility of the instantaneous cis photoproduct with helical secondary structure drives the subsequent peptide unfolding to a new conformational equilibrium between cis helix and cis disordered structures. The kinetic results show a approximately 40% decrease in the time-dependent ORD signal at 230 nm that is best fit to a single-exponential decay with a time constant of 55 +/- 6 ns. Folding and unfolding rates for cis FK-11-X are estimated to be approximately 3.0 x 10(6) s(-)(1) (1/330 ns) and approximately 1.5 x 10(7) s(-)(1) (1/66 ns), respectively.     

Photoinduced swelling control of amphiphilic azoaromatic polymer membrane

To control the swelling of polymer membrane by photoirradiation amphiphilic azoaromatic polymer membranes were prepared and a photoinduced change in the swelling degree of water was investigated. The azobenzene moiety in the side chain of the polymer was isomerized from trans form to cis form by ultraviolet (UV) irradiation and reverse isomerization was found by visible light irradiation. The swelling degree of the polymer membrane for water in the dark was decreased by UV radiation, and when visible light irradiation was carried out in the polymer membrane the degree of swelling recovered to the original level. The swelling degree decreased with an increase in the mole fraction of the azobenzene moiety in the dark and under UV irradiation. The deswelling degree of the polymer membrane by UV irradiation also decreased with an increase in the mole fraction of the azobenzene moiety. This reversible change in the swelling degree was considered to be caused by the photoisomerization of the azobenzene moiety in the polymer membrane.     

Synthesis of methyl‐substituted azobenzene–carbazole conjugated copolymers with photoinduced structural changes

Azobenzene switches its structure instantaneously by reversible trans‐to‐cis and cis‐to‐trans photoisomerization with light irradiations. Dynamic change in polymer structure is expected via introducing an azobenzene unit into the main chain. In this study, a set of methyl‐substituted azobenzene–carbazole conjugated copolymers is synthesized by the Suzuki–Miyaura coupling method. Introduction of methyl substituents to the azobenzene unit of the monomer, and polymerization in a high‐boiling solvent improve the molecular weight of the polymer. Decrease of effective conjugation length due to the twisted structure of the main chain allows progress of photoisomerization. The microstructure of the polymer was determined with grazing incidence X‐ray diffraction (GIXD) measurements using synchrotron radiation. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1756–1764     

Photochromism of 4-acryloxyazobenzene/(−)-menthyl acrylate copolymers

Copolymers of trans-4-acryloxyazobenzene ( AAB ) with (?)-menthyl acrylate ( MtA ) have been prepared by free radical initiation; comonomer reactivity ratios have been found to be r _AAB = 0.89 and r _MtA = 0.53. Dependence of chiroptical properties on copolymer composition has been investigated and contribution to circular dichroism by azobenzene chromophores of isolated and sequence AAB units, as well as the influence of the trans to cis photoisomerization, have been determined. Kinetics of photoinduced trans → cis and thermally induced cis → trans isomerization of azobenzene side chains have also been examined and the kinetic parameters evaluated with relation to copolymer structure. The results have been discussed in terms of light-induced secondary structure reversible modifications.     

Photoisomerization and Emission Properties of trans‐ and cis‐Poly(dimethylsilylenephenylenevinylene)s

The photoirradiation of trans‐ and cis‐poly(dimethylsilylenephenylenevinylene)s gave cis‐rich mixtures at equilibrium states. The degree of the photoisomerization could be exactly evaluated by comparing the UV spectra of the photoirradiated solutions with those of the trans and cis polymers. The geometric configuration of the trans and cis polymers was thermally stable and hardly changed even though they were heated. The trans and cis polymers exhibited different emission properties; e.g., trans polymer: λ_max = 400 nm, quantum yield = 3.4×10^–3; cis polymer: λ_max = 380 nm, quantum yield = 1.5×10^–3.     

含偶氮苯基侧基聚硅氧烷的合成及光致变色性

含偶氮苯基侧基聚硅氧烷的合成及光致变色性张其震，张静智，王艳（山东大学化学系济南２５０１００）（山东大学环境科学中心济南２５０１００）关键词聚硅氧烷，光致变色，光异构化，量子产率将光致变色性和液晶性化合物结合可得到新的多功能高分子材料，Ｒｉｎｇｅｄｏ...     

Synthesis and Surface-Active Properties of New Photosensitive Surfactants Containing the Azobenzene Group

Several water-soluble cationic surfactants, 4-alkylazobenzene-4'-(oxy-2-hydroxypropyl)trimethylammonium methylsulfate (AZMS) (AZMS-0, AZMS-1, AZMS-2, AZMS-4, and AZMS-8), containing alkylglycidylether and azoarene have been synthesized with high yields of 63-78% and their surface-active properties have been investigated upon irradiation with UV/vis light. All of the trans-AZMS surfactants are isomerized to cis-trans mixtures containing 92.5% cis isomer by UV light irradiation at 350 nm. The cis isomers in the mixtures are reverted to trans isomers by visible light irradiation (lambda>445 nm). Such photoisomerization induces changes in the surface activity of each surfactant. The critical micelle concentration (cmc) of the trans form of AZMS-8 surfactant is about 1.28x10(-4) mol/l. At the photostationary state, 92.5% of the trans form is changed to the cis form which exhibits a slightly higher cmc (3.41x10(-4) mol/l). The new cmc of AZMS surfactants upon photoisomerization is similar to that of the ideal mixed micellar system. In particular, the ratio of cmc(cis) to cmc(trans) of AZMS derivatives is about 1.87-2.85 which increases proportionally with the chain length of alkyl group. The minimum average area per molecule (A(min)(a/w)) for the trans and cis isomers of AZMS-8 is 0.60 and 0.74 nm(2), respectively. The difference in the A(min)(a/w) may originate from the structural differences in the two isomers. These values are quite different as compared to those of the conventional azobenzene surfactants. Copyright 2000 Academic Press.     

O?+?C2H4 potential energy surface: lowest-lying singlet at the multireference level

Extensive density functional theory (DFT) calculations have been performed to develop a force field for the classical molecular dynamics (MD) simulations of various azobenzene derivatives. Besides azobenzene, we focused on a thiolated azobenzene’s molecular rod (4′-{[(1,1′-biphenyl)-4-yl]diazenyl}-(1,1′-biphenyl)-4-thiol) that has been previously demonstrated to photoisomerize from trans to cis with high yields on surfaces. The developed force field is an extension of OPLS All Atoms, and key bonding parameters are parameterized to reproduce the potential energy profiles calculated by DFT. For each of the parameterized molecule, we propose three sets of parameters: one best suited for the trans configuration, one for the cis configuration, and finally, a set able to describe both at a satisfactory degree. The quality of the derived parameters is evaluated by comparing with structural and vibrational experimental data. The developed force field opens the way to the classical MD simulations of self-assembled monolayers (SAMs) of azobenzene’s molecular rods, as well as to the quantum mechanics/molecular mechanics study of photoisomerization in SAMs.     

Contrast viscosity changes upon photoirradiation for mixtures of poly(acrylic acid)-based alpha-cyclodextrin and azobenzene polymers

Polymer-polymer interactions were investigated for mixtures of a poly(acrylic acid) (pAA) carrying azobenzene (pC12Azo) and two kinds of pAA carrying alpha-cyclodextrin (CD), in which CDs are attached to the main chain through the 3- and 6-positions in CD (p3alphaCD and p6alphaCD, respectively), using several techniques, such as viscosity and NMR measurements. Viscosity data exhibited contrast changes upon UV irradiation: thinning (p3alphaCD/pC12Azo) and thickening (p6alphaCD/pC12Azo). NOESY spectra confirmed that the contrast viscosity changes were ascribable to differences in how CD moieties interact with pC12Azo after photoisomerization of azobenzene moieties from trans to cis: dissociation of inclusion complexes (p3alphaCD/pC12Azo) and formation of interlocked complexes (p6alphaCD/pC12Azo).