Investigations of the antibacterial properties of ciprofloxacin@SiO2

The antibacterial activity of ciprofloxacin-encapsulated silica nanoshells synthesized from gold@silica core-shell nanoparticles has been investigated. The minimum inhibitory concentration of the material was found using the agar dilution method, and it showed better antibacterial activity compared to free ciprofloxacin in the case of Escherichia coli DH5, whereas the same activity was found for Lactococcus lactis MG 1363. Hydrophobicity measurements carried out in an octanol-water mixture suggested that ciprofloxacin@SiO2 is distributed almost equally in the aqueous and nonaqueous phases. The kinetics of the uptake of ciprofloxacin@SiO2 was compared with that of free ciprofloxacin. Fluorescence imaging studies carried out using fluorescein isothiocyanate@SiO2 showed that the nanoshells enter the bacterial cell. The uptake of silica shells has been probed by transmission electron microscopy also.     

Biphasic synthesis of Au@SiO2 core-shell particles with stepwise ligand exchange

We report the synthesis of well-dispersed core-shell Au@SiO(2) nanoparticles with minimal extraneous silica particle growth. Agglomeration was suppressed through consecutive exchange of the stabilizing ligands on the gold cores from citrate to L-arginine and finally (3-mercaptopropyl)triethoxysilane. The result was a vitreophilic, stable gold suspension that could be coated with silica in a biphasic mixture through controlled hydrolysis of tetraethoxysilane under L-arginine catalysis. Unwanted condensation of silica particles without gold cores was limited by slowing the transfer across the liquid-liquid interface and reducing the concentration of the L-arginine catalyst. In-situ dynamic light scattering and optical transmission spectroscopy revealed the growth and dispersion states during synthesis. The resulting core-shell particles were characterized via dynamic light scattering, optical spectroscopy, and electron microscopy. Their cores were typically 19 nm in diameter, with a narrow size distribution, and could be coated with a silica shell in multiple steps to yield core-shell particles with diameters up to 40 nm. The approach was sufficiently controllable to allow us to target a shell thickness by choosing appropriate precursor concentrations.     

Monodispersed core-shell Fe3O4@Au nanoparticles

The ability to synthesize and assemble monodispersed core-shell nanoparticles is important for exploring the unique properties of nanoscale core, shell, or their combinations in technological applications. This paper describes findings of an investigation of the synthesis and assembly of core (Fe(3)O(4))-shell (Au) nanoparticles with high monodispersity. Fe(3)O(4) nanoparticles of selected sizes were used as seeding materials for the reduction of gold precursors to produce gold-coated Fe(3)O(4) nanoparticles (Fe(3)O(4)@Au). Experimental data from both physical and chemical determinations of the changes in particle size, surface plasmon resonance optical band, core-shell composition, surface reactivity, and magnetic properties have confirmed the formation of the core-shell nanostructure. The interfacial reactivity of a combination of ligand-exchanging and interparticle cross-linking was exploited for molecularly mediated thin film assembly of the core-shell nanoparticles. The SQUID data reveal a decrease in magnetization and blocking temperature and an increase in coercivity for Fe(3)O(4)@Au, reflecting the decreased coupling of the magnetic moments as a result of the increased interparticle spacing by both gold and capping shells. Implications of the findings to the design of interfacial reactivities via core-shell nanocomposites for magnetic, catalytic, and biological applications are also briefly discussed.     

Modification of gold nanoparticle composite nanostructures using thermosensitive core-shell particles as a template

We report the formation of novel thermosensitive hybrid core-shell particles via in situ synthesis of gold nanoparticles using thermosensitive core-shell particles as a template. The template core-shell particles, with cores composed mainly of poly(glycidyl methacrylate) (GMA) and shells composed mainly of poly(N-isopropylacrylamide) (PNIPAM), were synthesized in aqueous medium, and functional groups such as thiol groups were incorporated into each particle. We found that these particles containing thiol groups were effective for the in situ synthesis of gold nanoparticles in long-term storage. The obtained hybrid particles exhibited a reversible color change from red to purple, which originated from the surface plasmon resonance of gold nanoparticles and which was temperature-dependent in the range of 25-40 degrees C. In addition to their thermosensitive property, the hybrid particles exhibited the unique characteristic of uniform distribution on a solid substrate. The particles obtained by this approach have potential thermosensitive applications such as in sensors and photonic or electronic devices.     

Synthesis, characterization and preliminary toxicity assays of NIR-active Au-silicate nanoparticles through a sol-gel processing

Monodisperse Au-silicate nanoparticles (10.7±1.6 nm in diameter) were prepared by reduction of aqueous solution containing 2 mM HAuCl₄ with sodium citrate (1 wt.%) in a hydrosol, in which small clusters of silicate formed by hydrolysis and polymerization of 3-aminopropyltrimethoxysilane (APTMS). APTMS covalently linked to reduced gold particles through its -NH₂ end-group. UV-vis spectra of the obtained Au-silicate nanoparticles showed a peak at ∼690 nm due to the interface effects between the Au and the silicate matrix. The Au-silicate nanoparticles exhibited near-IR (NIR) sensitivity. Cytotoxicity and limited hemocompatibility in vitro for the prepared Au-silicate nanoparticles were also investigated. It was shown that at lower concentration (<1 μg/ml), the Au-silicate nanoparticles were biocompatible without causing any cytotoxicity and hemolysis.     

Synthesis, assembly and reaction of a nanocatalyst in microfluidic systems: a general platform

We present a successive microfluidic approach to create and characterize hierarchical catalyst structures consisting of metal-decorated nanoparticles that are assembled into porous microparticles ("supraball" catalysts). First, using a silicon microreactor, platinum nanoparticles with a very narrow size distribution are grown and immobilized uniformly onto iron oxide/silica core-shell nanospheres. The Pt-decorated silica nanospheres are then assembled into uniform, spherical, micron-sized particles by using emulsion templates generated with a microfluidic drop generator. Finally, the assembled supraballs are loaded into a packed-bed microreactor for characterization of the catalytic reactivity. The prepared material showed excellent catalytic activity for the oxidation of aldehyde with only ～1 mg of material (containing ～50 μg of platinum nanoparticles). After the reactions, all the supraball catalysts are recovered by using the magnetic property of the underlying iron oxide/silica core-shell nanospheres.     

Facile synthesis of silver core - silica shell composite nanoparticles

Combining metal nanoparticles and dielectrics (e.g. silica) to produce composite materials with high dielectric constant is motivated by application in energy storage. Control over dielectric properties and their uniformity throughout the composite material is best accomplished if the composite is comprised of metal core - dielectric shell structured nanoparticles with tunable dimensions. We have synthesized silver nanoparticles in the range of 40-100nm average size using low concentration of saccharide simultaneously as the reducing agent and electrostatic stabilizer. Coating these silver particles with silica from tetraalkoxysilanes has different outcomes depending on the alcoholic solvent and the silver particle concentration. A common issue in solution-based synthesis of core-shell particles is heterogeneous nucleation whereupon two populations are formed: the desired core-shell particles and undesired coreless particles of the shell material. We report the formation of Ag@SiO(2) core-shell particles without coreless silica particles as the byproduct in 2-propanol. In ethanol, it depends on the silver surface area available whether homogeneous nucleation of silica on silver is achieved. In methanol and 1-butanol, core-shell particles did not form. This demonstrates the significance of controlling the tetraalkoxysilane hydrolysis rate when growing silica shells on silver nanoparticles.     

Gold nanoparticle localization at the core surface by using thermosensitive core-shell particles as a template

We report novel thermosensitive hybrid core-shell particles via in situ gold nanoparticle formation using thermosensitive core-shell particles as a template. This method for the in situ synthesis of gold nanoparticles with microgel interiors offers the advantage of eliminating or significantly reducing particle aggregation. In addition, by using thermosensitive microgel structures in which the shell has thermosensitive and gel properties in water--whereas the core itself is a water-insoluble polymer--we were able to synthesize the gold nanoparticles only at the surface of the core, which had reactive sites to bind metal ions. After the gold nanoparticles were synthesized, electroless gold plating was carried out to control the thickness of the gold nanoshells. The dispersions of the obtained hybrid particles were characterized by dynamic light scattering and UV-vis absorption spectroscopy, and the dried particles were also observed by electron microscopy. Adaptation of the technique shown here will create a number of applications as optical, electronic, and biomedical functional materials.     

Formation of gold@polymer core-shell particles and gold particle clusters on a template of thermoresponsive and pH-responsive coordination triblock copolymer

Template synthesis of various morphological gold colloidal nanoparticles using a thermoresponsive and pH-responsive coordination triblock copolymer of poly(ethylene glycol)-b-poly(4-vinylpyridine)-b-poly(N-isopropylacrylamide) is studied. The template morphology of the thermoresponsive and pH-responsive coordination triblock copolymer, which can be tuned by simply changing the pH or temperature of the triblock copolymer aqueous solution, ranges from single chains to core-corona micelles and further to micellar clusters. Various morphological gold colloidal nanoparticles such as discrete gold nanoparticles, gold@polymer core-shell nanoparticles, and gold nanoparticle clusters are synthesized on the corresponding template of the triblock copolymer by first coordination with gold ions and then reduction by NaBH4. All three resultant gold colloidal nanoparticles are stable in aqueous solution, and their sizes are 2, 10, and 7 nm, respectively. The gold@polymer core-shell nanoparticles are thermoresponsive. The gold nanoparticle cluster has a novel structure, and each one holds about 40 single gold nanoparticles.     

Surface patterning of silica nanostructures using bio-inspired templates and directed synthesis

Natural systems excel in directing the synthesis of inorganic materials for various functional purposes. One of the best-studied systems is silica synthesis, as occurs in diatoms and marine sponges. Various biological and synthetic polymers have been shown to template and catalyze silica formation from silicic acid precursors. Here, we describe the use of poly-L-lysine to promote the synthesis of silica in neutral, aqueous solution and when immobilized onto a silicon support structure under similar conditions. Either reagent jetting or conventional photolithography techniques can be used to pattern the templating polymer. Spots created by reagent jetting led to the creation of silica structures in the shape of a ring that may be a result of the spotting process. Photolithographically defined poly-L-lysine spots led to thin laminate structures after exposure to a dilute aqueous silicic acid solution. The laminate structures were nanostructured and highly interconnected. Photolithographic patterning of (3-aminopropyl)trimethoxysilane, a reagent that mimics the lysine functional group, led to similar silica coatings even though low-molecular-weight materials do not rapidly promote silica synthesis in solution. This result highlights the importance of functional-group arrangement for templating and promoting the synthesis of inorganic materials. The described surface-patterning techniques offer a route to integrate conventional silicon-patterning technologies with biologically based material synthesis. Such combined fabrication techniques enable controlled assembly over multiple length scales and an approach to understanding interfacial silica synthesis, as occurs in natural systems.     

Silica-metal core-shell nanostructures

Silica-metal nanostructures consisting of silica cores and metal nanoshells attract a lot of attention because of their unique properties and potential applications ranging from catalysis and biosensing to optical devices and medicine. The important feature of these nanostructures is the possibility of controlling their properties by the variation of their geometry, shell morphology and shell material. This review is devoted to silica-noble metal core-shell nanostructures; specifically, it outlines the main methods used for the preparation and surface modification of silica particles and presents the major strategies for the formation of metal nanoshells on the modified silica particles. A special emphasis is given to the St?ber method, which is relatively simple, effective and well verified for the synthesis of large and highly uniform silica particles (with diameters from 100 nm to a few microns). Next, the surface chemistry of these particles is discussed with a special focus on the attachment of specific organic groups such as aminopropyl or mercaptopropyl groups, which interact strongly with metal species. Finally, the synthesis, characterization and application of various silica-metal core-shell nanostructures are reviewed, especially in relation to the siliceous cores with gold or silver nanoshells. Nowadays, gold is most often used metal for the formation of nanoshells due to its beneficial properties for many applications. However, other metals such as silver, platinum, palladium, nickel and copper were also used for fabrication of core-shell nanostructures. Silica-metal nanostructures can be prepared using various methods, for instance, (i) growth of metal nanoshells on the siliceous cores with deposited metal nanoparticles, (ii) reduction of metal species accompanied by precipitation of metal nanoparticles on the modified silica cores, and (iii) formation of metal nanoshells under ultrasonic conditions. A special emphasis is given to the seed-mediated growth, where metal nanoshells are formed on the modified silica cores with deposited metal nanoparticles. This strategy assures a good control of the nanoshell thickness as well as its surface properties.     

Silica encapsulation and magnetic properties of FePt nanoparticles

Core-shell nanoparticles have emerged as an important class of functional nanostructures with potential applications in many diverse fields, especially in health sciences. We have used a modified aqueous sol-gel route for the synthesis of size-selective FePt@SiO2 core-shell nanoparticles. In this approach, oleic acid and olyel amine stabilized FePt nanoparticles are first encapsulated through an aminopropoxysilane (APS) monolayer and then subsequent condensation of triethoxysilane (TEOS) on FePt particle surface. These well-defined FePt@SiO2 core-shell nanoparticles with narrow size distribution become colloidal in aqueous media, and can thus be used as carrier fluid for biomolecular complexes. In comparison, the scarce hydrophilic nature of oleic acid monolayers on FePt particle surface yields an edgy partial coating of silica when only TEOS is applied for the surface modification. The synthesized core-shell nanoparticles were characterized by direct techniques of high resolution transmission electron microscopy (HRTEM), EDS and indirectly via UV-vis absorption and FTIR studies. The FePt@SiO2 nanoparticles exhibit essential characteristics of superparamagnetic behavior, as investigated by SQUID magnetometry. The blocking temperatures (T(B)) of FePt and FePt@SiO2 (135 and 80 K) were studied using zero field cooled (ZFC)/field cooled (FC) curves.     

吲哚类菁染料Cy3嵌入的核壳荧光纳米颗粒的制备及其性质研究

以蛋白质或多肽修饰的吲哚类菁染料Cy3为内核, 采用实验条件简单的油包水反相微乳液方法成核, 通过正硅酸乙酯水解形成的网状二氧化硅包壳的方法制备吲哚类菁染料Cy3嵌入的核壳荧光纳米颗粒. 考察了以不同等电点的蛋白质和多肽修饰的Cy3为内核材料对吲哚类菁染料Cy3嵌入的核壳荧光纳米颗粒制备的影响. 结果表明, 分别采用人免疫球蛋白(IgG)或多聚赖氨酸修饰的Cy3为内核材料, 都能制备荧光强度高、荧光稳定性强和染料泄漏极少的Cy3嵌入的核壳荧光纳米颗粒. 进一步对Cy3嵌入的核壳荧光纳米颗粒进行了表征, 并将基于这一新型的荧光纳米颗粒建立起来的生物标记方法初步应用于流感病毒DNA的检测, 其检测线性范围为3.18×10-10～1.27×10-9 mol/L, 检测下限为3.51×10-10 mol/L, 相关系数r为0.986 5.     

Synthesis and characterization of monodispersed core-shell spherical colloids with movable cores

Gold nanoparticles have been conformally coated with amorphous silica (using a sol-gel method) and then an organic polymer (via surface-grafted, atom transfer radical polymerization) to form spherical colloids with a core-double-shell structure. The thickness of silica and polymer shells could be conveniently controlled in the range of tens to several hundred nanometers by changing the concentration of the reagent and/or the reaction time. Selective removal of the silica layer (through etching in aqueous HF) led to the formation of hollow polymer beads containing movable gold cores. This new form of core-shell particles provides a unique system for measuring the feature size and transport property associated with hollow particles. In one demonstration, we showed that the thickness of a closed polymer shell could be obtained by mapping the electrons backscattered from the core and shell. In another demonstration, the plasmon resonance band of the gold cores was used as an optical probe to follow the diffusion kinetics of chemical reagents across the polymer shells.     

Separation of gold nanoparticles with a monolithic silica capillary column in liquid chromatography

A separation system for gold nanoparticles was developed using monolithic silica capillary columns with 50 μm i.d., which were prepared via in-situ sol-gel processes. Gold nanoparticles with five different average sizes were synthesized via reduction of tetrachloroauric acid (HAuCl(4)) under different synthesis conditions, and were evaluated by UV-visible spectrophotometry, dynamic light scattering as well as transmission electron microscopy before they were separated using the developed system. The results showed that all of the gold nanoparticles had a certain size distribution, and the mean sizes obtained were 13, 17, 33, 43 and 61 nm, with σ = 2.5, 2.7, 5.2, 5.1 and 5.6 nm, respectively. Transmission electron microscopy showed that the samples with mean sizes of 13 and 17 nm were almost spherical, while larger samples were slightly non-uniform. The agglomeration of gold nanoparticles as the sample could be prevented by using a sodium dodecyl sulfate aqueous solution as the mobile phase, and gold nanoparticles were retained by adsorption on the silica surface. Separation with 8 mM sodium dodecyl sulfate as the eluent and a 1000-mm column was successful, and the separation of gold nanoparticles with 61 and 17 nm or 61 and 13 nm was demonstrated. The separation results obtained using a nonporous silica packed column as well as monolithic silica columns with or without mesopore growth were compared. It was found that separation using the mesopore-less monolithic column achieved better resolution. Through the use of a 2000-mm separation column, the mixtures of 61, 43, 17 nm and 61, 33, 13 nm could be separated.     

Thermosensitive copolymer networks modify gold nanoparticles for nanocomposite entrapment

The core-shell gold nanoparticles and copolymer of N-isopropylacrylamide (NIPAM) and N,N'-methylenebisacrylamide (MBAA) hybrids (Au@copolymer) were fabricated through surface-initiated atom-transfer radical polymerization (ATRP) on the surface of gold nanoparticles in 2-propanol/water mixed solvents. The surface of citrate-stabilized gold nanoparticles was first modified by a disulfide initiator for ATRP. The slight cross-linking polymerization between NIPAM and MBAA occurred on the gold surface and resulted in the formation of core-shell Au@copolymer nanostructures that were characterized by TEM, and FTIR and UV-visible spectroscopy. Such synthesized Au@copolymer hybrids possess clearly thermosensitive properties and exhibit "inspire" and "expire" water behavior in response to temperature changes in aqueous solution. Because of this property, we enable to trap and encapsulate smaller nanoparticles by using the free space of the copolymer-network scaffold anchored at the gold surface.     

Rapid synthesis of Au, Ag, and bimetallic Au core-Ag shell nanoparticles using Neem (Azadirachta indica) leaf broth

We report on the use of Neem (Azadirachta indica) leaf broth in the extracellular synthesis of pure metallic silver and gold nanoparticles and bimetallic Au/Ag nanoparticles. On treatment of aqueous solutions of silver nitrate and chloroauric acid with Neem leaf extract, the rapid formation of stable silver and gold nanoparticles at high concentrations is observed to occur. The silver and gold nanoparticles are polydisperse, with a large percentage of gold particles exhibiting an interesting flat, platelike morphology. Competitive reduction of Au3+ and Ag+ ions present simultaneously in solution during exposure to Neem leaf extract leads to the synthesis of bimetallic Au core-Ag shell nanoparticles in solution. Transmission electron microscopy revealed that the silver nanoparticles are adsorbed onto the gold nanoparticles, forming a core-shell structure. The rates of reduction of the metal ions by Neem leaf extract are much faster than those observed by us in our earlier studies using microorganisms such as fungi, highlighting the possibility that nanoparticle biological synthesis methodologies will achieve rates of synthesis comparable to those of chemical methods.     

Free-standing nanogold membranes as scaffolds for enzyme immobilization

We demonstrate herein the formation of a free-standing gold nanoparticle membrane and its use in the immobilization of the enzyme, pepsin. The nanogold membrane is synthesized by the spontaneous reduction of aqueous chloroaurate ions at the liquid-liquid interface by the bifunctional molecule bis(2-(4-aminophenoxy)ethyl) ether (DAEE) taken in chloroform. This process results in the formation of a robust, malleable free-standing nanogold membrane consisting of gold nanoparticles embedded in a polymeric background. Recognizing that gold nanoparticles are excellent candidates for immobilization of enzymes, we have immobilized pepsin on the nanogold membrane, leading to a new class of biocatalyst. A highlight of the new pepsin-nanogold biocatalyst is the ease with which separation from the reaction medium may be achieved. The catalytic activity of pepsin in the bioconjugate was comparable to that of the free enzyme in solution. The pepsin-nanogold membrane bioconjugate material exhibited excellent biocatalytic activity over 10 successive reuse cycles as well as enhanced pH, temperature, and temporal stability.     

Tailored core-shell-shell nanostructures: sandwiching gold nanoparticles between silica cores and tunable silica shells

Size tunable and structure tailored core-shell-shell nanospheres containing silica cores, gold nanoparticle shells, and controlled thicknesses of smooth, corrugated, or porous silica shells over the gold nanoparticles have been synthesized. The synthesis involved the deposition of gold nanoparticles on silica cores, followed by sol-gel processing of tetraethoxysilane (TEOS) or sodium silicate to form dense or porous silica shells, respectively, over the gold nanoparticles. The structures and sizes of the resulting core-shell-shell nanospheres were found to heavily depend on the sizes of the core nanoparticles, the relative population of the gold nanoparticles on each core, and the concentration of TEOS. While a higher TEOS concentration resulted in thicker and more uniform silica shells around individual larger silica cores (approximately > or =250 nm in diameter), the same TEOS concentration resulted in aggregated and twin core-shell-shell nanostructures for smaller silica cores (approximately < or =110 nm in diameter). The thinner silica shells were synthesized by using a lower TEOS concentration. By using sodium silicate (Ung et al. J. Phys. Chem. B 1999, 103, 6770), the porous silica shells were synthesized. Controlled chemical etching of the core-shell-shell nanoparticles with an aqueous KCN solution resulted in corrugated silica shells around the gold nanoparticles or corrugated silica nanospheres with few or no gold nanoparticles. This has allowed synthesis of new types of core-shell-shell nanoparticles with tailored corrugated shells. The nanoporous silica shells provided accessible structures to the embedded metal nanoparticles as observed from the electrochemical response of the gold nanoparticles.     

Synthesis and characterization of amino-functionalized silica nanoparticles

Monodispersed raw silica nanoparticles (RSNPs) with the particle size of 40 nm were successfully fabricated by condensation reaction of tetraethylorthosilicate in methanol with high concentration ammonia (1.2 M). The RSNPs were treated with the coupling agent 3-aminopropyltrimethoxysilane (APTMS) for grafting amine groups on the surface to obtain the amino-functionalized silica nanoparticles (ASNPs). The chemical structure and surface morphology of RSNPs and ASNPs were characterized by Fourier-transform infrared spectra, solid-state NMR spectra and scanning electron microscopy. In addition, a method to quantify the grafted amine groups on the surface of ASNPs was developed by using the ninhydrin assay. The ninhydrin analysis showed that 60 mol % of the APTMS molecules were immobilized on the surface, that is, 4.4 amine groups per nm2 of surface area were bonded on nonporous ASNPs. The weight loss of particles obtained from thermogravimetry analysis indicated the amount of grafted amine groups and was used as a reference to compare with the value determined from ninhydrin method.