Structural,thermal and ion transport studies on nanocomposite polymer electrolyte-{(PEO + SiO<Subscript>2</Subscript>):NH<Subscript>4</Subscript>SCN} system

Development and characterisation of polyethylene oxide (PEO)-based nanocomposite polymer electrolytes comprising of (PEO-SiO₂): NH₄SCN is reported. For synthesis of the said electrolyte, polyethylene oxide has been taken as polymer host and NH₄SCN as an ionic charge supplier. Sol–gel-derived silica powder of nano dimension has been used as ceramic filler for development of nanocomposite electrolytes. The maximum conductivity of electrolyte ∼2.0 × 10⁻⁶ S/cm is observed for samples containing 30 wt.% silica. The temperature dependence of conductivity seems to follow an Arrhenius-type, thermally activated process over a limited temperature range.     

Structural and ionic conductivity studies on proton conducting polymer electrolyte based on polyvinyl alcohol

An attempt has been made to prepare a new proton conducting polymer electrolyte based on polyvinyl alcohol (PVA) doped with NH₄NO₃ by solution casting technique. The complex formation between polymer and dissociated salt has been confirmed by X-ray diffraction analysis. The ionic conductivity of the prepared polymer electrolyte has been found by ac impedance spectroscopic analysis. The highest ionic conductivity has been found to be 7.5 × 10⁻³ Scm⁻¹ at ambient temperature for 20 mol% NH₄NO₃-doped PVA with low activation energy (~0.19 eV). The temperature-dependent conductivity of the polymer electrolyte follows an Arrhenius relationship, which shows hopping of ions in the polymer matrix.     

Vibrational and impedance spectroscopic analysis of poly(vinyl alcohol)-based solid polymer electrolytes

Solid polymer electrolytes based on poly(vinyl alcohol) (PVA) doped with NH₄Br have been prepared by the solution-casting method. The complex formation between the polymer and the salt has been confirmed by Fourier transform infrared spectroscopy. The highest conductivity at 303 K has been found to be of the order of 10⁻⁴ Scm⁻¹ for 25 mol% NH₄Br-doped PVA system. The ionic transference number of polymer electrolyte has been estimated by Wagner’s polarization method, and the results reveal that the conducting species are predominantly ions. Paper presented at the Third International Conference on Ionic Devices (ICID 2006), Chennai, Tamilnadu, India, Dec. 7–9, 2006.     

Structural, vibrational and electrical characterization of PVA-NH4Br polymer electrolyte system

Polymer electrolyte based on PVA doped with different concentrations of NH₄Br has been prepared by solution casting technique. The complexation of the prepared polymer electrolytes has been studied using X-ray diffraction (XRD) and Fourier transform infra red (FTIR) spectroscopy. The maximum ionic conductivity (5.7×10⁻⁴ S cm⁻¹) has been obtained for 25 mol% NH₄Br-doped PVA polymer electrolyte. The temperature dependence of ionic conductivity of the prepared polymer electrolytes obeys Arrhenius law. The ionic transference number of mobile ions has been estimated by dc polarization method and the results reveal that the conducting species are predominantly ions. The dielectric behavior of the polymer electrolytes has been analyzed using dielectric permittivity and electric modulus spectra.     

Effect of PVAc dispersal into PVA-NH4SCN polymer electrolyte

The present paper deals with ion transport studies on a new proton conducting composite polymer electrolyte — (PVA_x:NH₄SCN)_y:PVAc system. Complexation and morphology of the composite electrolyte films are discussed on the basis of X-ray diffraction and differential scanning calorimetry data. Coulometry and transient ionic current measurements revealed charge transport through protons. The maximum ion conductivity was found to be 7.4·10⁻⁴ S·cm⁻¹ for the composition: x=0.15, y=0.12. The observed conductivity behaviour is correlated to the morphology of the films. The temperature dependence of the electrical conductivity exhibits Arrhenius characteristics in two different temperature ranges separated by a plateau region related to morphological changes occurring in the electrolyte.     

AC impedance studies on proton-conducting PAN : NH4SCN polymer electrolytes

Solid polymer electrolytes based on polyacrylonitrile (PAN) doped with ammonium thiocyanate (NH₄SCN) in different molar ratios of polymer and salt have been prepared by solution-casting method using DMF as solvent. The increase in amorphous nature of the polymer electrolytes has been confirmed by XRD analysis. A shift in glass transition temperature (T _g) of the PAN?:?NH₄SCN electrolytes has been observed from the DSC thermograms which indicates the interaction between the polymer and the salt. From the AC impedance spectroscopic analysis, the ionic conductivity has been found to increase with increasing salt concentration up to 30 mol% of NH₄SCN beyond which the conductivity decreases and the highest ambient temperature conductivity has been found to be 5.79?×?10^?3 S cm^?1. The temperature-dependent conductivity of the polymer electrolyte follows an Arrhenius relationship which shows hopping of ions in the polymer matrix. The dielectric loss curves for the sample 70 mol% PAN?:?30 mol% NH₄SCN reveal the low-frequency β-relaxation peak pronounced at high temperature, and it may be caused by side group dipoles. The ionic transference number of polymer electrolyte has been estimated by Wagner’s polarization method, and the results reveal that the conductivity species are predominantly ions.     

Synthesis and impedance analysis of proton-conducting polymer electrolyte PVA:NH4F

An attempt has been made to prepare a new proton-conducting polymer electrolyte based on poly(vinyl alcohol) doped with ammonium fluoride (NH₄F) by solution casting technique. The complex formation between polymer and dissociated salt has been confirmed by X-ray diffraction and Fourier transform infrared spectroscopy studies. The highest ionic conductivity has been found to be 6.9?×?10^?6?Scm^?1 at ambient temperature (303 K) for 85PVA:15NH₄F polymer electrolyte. The conductance spectra contain a low frequency plateau region and high frequency dispersion region. The dielectric spectra exhibit the low frequency dispersion, which is due to space charge accumulation at the electrode–electrolyte interface. The modulus spectra indicate non-Debye nature of the material. The highest ionic conductivity polymer electrolyte 85PVA:15NH₄F has low activation energy 0.2 eV among the prepared polymer electrolytes.     

New polymer electrolyte based on (PVA–PAN) blend for Li-ion battery applications

A polymer blend electrolyte based on polyvinyl alcohol (PVA) and polyacrylonitrile (PAN) was prepared by a simple solvent casting technique in different compositions. The ionic conductivity of polymer blend electrolytes was investigated by varying the PAN content in the PVA matrix. The ionic conductivity of polymer blend electrolyte increased with the increase of PAN content. The effect of lithium salt concentrations was also studied for the polymer blend electrolyte of high ionic conductivity system. A maximum ionic conductivity of 3.76×10⁻³ S/cm was obtained in 3 M LiClO₄ electrolyte solution. The effect of ionic conductivity of polymer blend electrolyte was measured by varying the temperature ranging from 298 to 353 K. Linear sweep voltammetry and DC polarization studies were carried out to find out the stability and lithium transference number of the polymer blend electrolyte. Finally, a prototype cell was assembled with graphite as anode, LiMn₂O₄ as cathode, and polymer blend electrolyte as the electrolyte as well as separator, which showed good compatibility and electrochemical stability up to 4.7 V.     

Structural and thermal studies of [PVA–LiAc] : TiO2 polymer nanocomposite system

Nanocomposite polymer electrolyte consisting of polyvinyl alcohol (PVA) and lithium acetate with TiO₂ filler has been synthesised by combination of solution cast technique and sol–gel process. The composite electrolyte films were characterised by different experimental techniques. The average particle size of composite electrolytes lies between 25 and 30?nm. System is essentially ionic with maximum conductivity of polymer electrolyte 90[80PVA–20LiAc]:10TiO₂ (～4.5?×?10^?6?S?cm^?1) at room temperature.     

Thermal and electrical studies on composite gel electrolyte system: PEG–PVA–(NH4CH2CO2)2

The present article reports the synthesis and characterisation of a highly conducting composite polymer gel electrolyte, namely polyethylene glycol–polyvinyl alcohol (PVA)–ammonium succinate system. Formation of an amorphous composite gel electrolyte has been evidenced in differential scanning calorimetry experiments. Thermogravimetric analysis of the composite gel electrolyte has shown better thermal stability of films containing 25 wt% PVA. Composite gel system containing 10 wt% PVA exhibits optimal ionic conductivity (4.0 × 10^?4 s cm^?1) and its variation with temperature follows Vogel, Tamman and Fulcher relationship. The magnitude of variation in ionic conductivity (with temperature) of these composite electrolytes and its Williams, Landel and Ferry fit reveals liquid-like charge transport. Composite electrolyte with 25 wt% PVA appears to be a suitable candidate for device applications on the basis of experimental findings.     

Effects of gamma radiation treatment and plasticizer on alkaline solid polymer electrolytes

Alkaline solid polymer electrolyte films have been prepared by the solvent-casting method. Gamma radiation treatment and propylene carbonate plastisizer were used to improve the ionic conductivity of the electrolytes at ambient temperature. The structure of the irradiated electrolytes changes from semi-crystalline to amorphous, indicating that the crosslinking of the polymer has been achieved at a dose of 200 kGy. The ionic conductivity at room temperature of PVA/KOH blend increases from 10⁻⁷ to 10⁻³ Scm⁻¹ after the PVA crosslinking and when the plasticizer concentration was increased from 20 to 30%. Paper presented at the International Conference on Functional Materials and Devices 2005, Kuala Lumpur, Malaysia, June 6 – 8, 2005.     

Characterization of blend polymer PVA-PVP complexed with ammonium thiocyanate

Thin films of blend polymer electrolytes comprising poly(vinyl alcohol) (PVA) and poly(vinyl pyrrolidone) (PVP) complexed with ammonium thiocyanate (NH₄SCN) salt in different compositions have been prepared by solution casting technique using distilled water as solvent. The prepared films have been investigated by different experimental techniques. The complexation of these films has been studied by FTIR spectroscopy. The increase in amorphousness of the films with increase in NH₄SCN content has been confirmed by XRD analysis. The addition of ammonium thiocyanate salt to PVA-PVP polymer blend shows a shift in T_g of the blend. The effect of salt concentration and temperature on the ionic conductivity of the polymer blend films has been analyzed using AC impedance spectroscopy. The maximum conductivity of 6.85 × 10^?4 S cm^?1 at room temperature has been observed for the blend with 50 mol% PVA-50 mol% PVP complexed with 40 mol% NH₄SCN. The activation energy has been found to be minimum (0.24 eV) for this sample. Wagner’s polarization technique shows that the charge transport in these blend films is predominantly due to ions. Using the highest conductivity blend polymer electrolyte, a proton battery has been fabricated and its discharge characteristics have been studied.     

Conductivity studies of plasticized proton conducting PVA–PVIM blend doped with NH4BF4

The proton conducting solid-state polymer electrolyte comprising blend of poly(vinyl alcohol) (PVA) and poly(N-vinylimidazole) (PVIM), ammonium tetrafluoroborate (NH₄BF₄) as salt, and polyethylene glycol (PEG) (molecular weight 300 and 600) as plasticizer is prepared at various compositions by solution cast technique. The prepared films are characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction, and scanning electron microscopy analysis. The conductivity–temperature plots are found to follow an Arrhenius nature. The conductivity of solid polymer electrolytes is found to depend on salt and plasticizer content and also on the dielectric constant value and molecular weight of the plasticizer. Maximum ionic conductivity values of 2.20?×?10^?4 and 1.28?×?10^?4?S?cm^?1 at 30 °C are obtained for the system (PVA–PVIM)?+?20 wt.% NH₄BF₄?+?150 wt.% PEG300 and (PVA–PVIM)?+?20 wt.% NH₄BF₄?+?150 wt.% PEG300, respectively. The blended polymer, complexed with salt and plasticizer, is shown to be a predominantly ionic conductor. The proton transport in the system may be expected to follow Grotthuss-type mechanism.     

Effects of MnO<Subscript>2</Subscript> nano-particles on the conductivity of PMMA-PEO-LiClO<Subscript>4</Subscript>-EC polymer electrolytes

Li-ion rechargeable batteries based on polymer electrolytes are of great interest for solid state electrochemical devices nowadays. Many studies have been carried out to improve the ionic conductivity of polymer electrolytes, which include polymer blending, incorporating plasticizers and filler additives in the electrolyte systems. This paper describes the effects of incorporating nano-sized MnO₂ filler on the ionic conductivity enhancement of a plasticized polymer blend PMMA–PEO–LiClO₄–EC electrolyte system. The maximum conductivity achieved is within the range of 10⁻³ S cm⁻¹ by optimizing the composition of the polymers, salts, plasticizer, and filler. The temperature dependence of the polymer conductivity obeys the VTF relationship. DSC and XRD studies are carried out to clarify the complex formation between the polymers, salts, and plasticizer.     

Effect of lithium salt concentration in PVAc/PMMA-based gel polymer electrolytes

Hybrid solid polymer electrolyte films comprising of poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA), LiClO₄, and propylene carbonate are prepared by solution casting technique by varying the salt concentration. In this study, PVAc/PMMA polymer blend ratio is fixed as 25:75 on the basis of conductivity and mechanical stability of the film. X-ray diffraction, Fourier transform infrared impedance, thermogravimetry/differential thermal analysis and scanning electron microscopy studies are carried out for the polymer electrolytes. The maximum ionic conductivity is found to be 4.511 × 10⁻⁴ S cm⁻¹ at 303 K for the plasticized polymer electrolyte with 8 wt.% of LiClO₄. The ionic conductivity is found to decrease with an increase of LiClO₄ concentration.     

Ionic conduction behavior in PVC–PEG blend polymer electrolytes upon the addition of TiO2

The blend-based polymer electrolyte consisting of poly (vinyl chloride) (PVC) and poly (ethylene glycol) (PEG) as host polymers and lithium perchlorate (LiClO₄) as the complexing salt was studied. An attempt was made to investigate the effect of TiO₂ concentration in the unplasticized PVC–PEG polymer electrolyte system. The XRD and FTIR studies confirm the formation of a polymer–salt complex. The conductivity results indicate that the incorporation of ceramic filler up to a certain concentration (15 wt.%) increases the ionic conductivity and upon further addition the conductivity decreases. The maximum ionic conductivity 0.012 × 10⁻⁴ S cm⁻¹ is obtained for PVC–PEG–LiClO₄–TiO₂ (75–25–5–15) system. Thermal stability of the polymer electrolyte is ascertained from TG/DTA studies.     

A novel PEO-based composite polymer electrolyte with NaAlOSiO molecular sieves powders

Ion-conducting thin film polymer electrolytes based on poly(ethylene oxide) (PEO) complexes with NaAlOSiO molecular sieves powders has been prepared by solution casting technique. X-ray diffraction, scanning electron microscopy, differential scanning calorimeter, and alternating current impedance techniques are employed to investigate the effect of NaAlOSiO molecular sieves on the crystallization mechanism of PEO in composite polymer electrolyte. The experimental results show that NaAlOSiO powders have great influence on the growth stage of PEO spherulites. PEO crystallization decrease and the amorphous region that the lithium-ion transport is expanded by adding appropriate NaAlOSiO, which leads to drastic enhancement in the ionic conductivity of the (PEO)₁₆LiClO₄ electrolyte. The ionic conductivity of (PEO)₁₆LiClO₄-12 wt.% NaAlOSiO achieves (2.370 ± 0.082) × 10⁻⁴ S · cm⁻¹ at room temperature (18 °C). Without NaAlOSiO, the ionic conductivity has only (8.382 ± 0.927) × 10⁻⁶ S · cm⁻¹, enhancing 2 orders of magnitude. Compared with inorganic oxide as filler, the addition of NaAlOSiO molecular sieves powders can disperse homogeneously in the electrolyte matrix without forming any crystal phase and the growth stage of PEO spherulites can be hindered more effectively.     

Performance of ferrite fillers on electrical behavior of polymer nanocomposite electrolyte

Dispersal of nanofillers in polymer electrolytes have shown to improve the ionic properties of Polyethylene oxide (PEO)-based polymer electrolytes in recent times. The effects of different nanoferrite fillers (i.e., Al–Zn ferrite, Mg–Zn ferrite, and Zn ferrite) on the electrical transport properties have been studied here on the composite polymer electrolyte system. The interaction of salt/filler with electrolyte has been investigated by XRD studies. SEM image and infrared spectral studies give an indication of nanocomposite formation. In conductivity studies, all electrolyte systems are seen to follow universal power law. Composition dependence (with ferrite filler) gives the maximum conductivity in [93PEO–7NH₄SCN]: X ferrite (where X?=?2% in Al–Zn ferrite, 1% Mg–Zn ferrite, and 1% Zn ferrite) system.     

Electrical conductivity studies on PVA/PVP-KOH alkaline solid polymer blend electrolyte

A series of conducting thin-film solid electrolytes based on poly (vinyl alcohol)/ poly (vinyl pyrrolidone) (PVA/PVP) polymer blend was prepared by the solution casting technique. PVA and PVP were mixed in various weight percent ratios and dissolved in 20 ml of distilled water. The samples were analyzed by using impedance spectroscopy in the frequency range between 100 Hz and 1 MHz. The PVA/PVP system with a composition of 80% PVA and 20 wt.% PVP exhibits the highest conductivity of (2.2±1.4) × 10⁻⁷ Scm⁻¹. The highest conducting PVA/PVP blend was then further studied by adding different amounts of potassium hydroxide (KOH) ionic dopant. Water has been used as solvent to prepare PVA/PVP-KOH based alkaline solid polymer blend electrolyte films. The conductivity was enhanced to (1.5 ± 1.1) × 10⁻⁴ Scm⁻¹ when 40 wt.% KOH was added. Paper presented at the International Conference on Functional Materials and Devices 2005, Kuala Lumpur, Malaysia, June 6 – 8, 2005.     

Li ion conduction on plasticizer-added PVAc-based hybrid polymer electrolytes

Poly(vinyl acetate), poly(vinylidene fluoride–hexafluoropropylene), lithium perchlorate salt, and the different plasticizer-based gel polymer electrolytes were prepared by solvent-casting technique. The structural and the complex formation have been confirmed by X-ray diffraction spectroscopic analysis. Thermal stability of the different plasticizer-added electrolyte films has been analyzed by means of thermogravimetric analysis. Ionic conductivity of the electrolyte samples has been found as a function of temperature and the plasticizers. Among the various plasticizers, ethylene carbonate-based complexes exhibit maximum ionic conductivity value of the order of 10⁻⁴ Scm⁻¹. Finally, the microstructure of the maximum ionic conductivity sample has been depicted with the help of scanning electron microscope analysis.