季铵盐型双子表面活性剂与十八醇的混合单分子膜

研究了双子表面活性剂12-2-16和12-2-12分别与十八醇(C18H37OH)在空气-水界面上混合单分子膜的π-A等温线. 在相分离表面压以下, 比较了不同表面压下和不同混合比单分子膜的混合表面过剩自由能ΔGMexo, 分析了双子表面活性剂与脂肪醇在空气-水界面上混合膜中的相容性. 结果表明, 12-2-16与C18H37OH在所有混合摩尔比下随着表面压增高, 自由能增大. 12-2-12与C18H37OH混合膜体系的相容性取决于两者的混合比, ΔGMexo随所加入C18H37OH摩尔分数的增加逐渐增大, 从异种分子间净的吸引作用转变到相互排斥作用体系, 转变点为C18H37OH加入量的摩尔分数0.65. 当混合为热力学自发过程时, 增大表面压将有利于混合; 而对相互排斥体系, 增加表面压将使体系内异种分子之间的相互排斥作用更大.     

Optical method for predicting the composition of self-assembled monolayers of mixed thiols on surfaces coated with silver nanoparticles

With a simple optical method, based on UV-vis absorption spectra on glass slides, it is possible to predict the composition of self-assembled monolayers of mixed thiols, grafted on monolayers of silver nanoparticles. Glass slides are modified with the layer-by-layer technique, first forming a monolayer of mercaptopropyltrimethoxysilane, then grafting a monolayer of silver nanoparticles on it. These surfaces are further coated by single or mixed thiol monolayers, by dipping the slides in toluene solutions of the chosen thiols. Exchange constants are calculated for the competitive deposition between the colorless 1-dodecanethiol or PEG5000 thiol and BDP-SH, with the latter being a thiol-bearing molecule containing the strongly absorbing BODIPY (4,4-difluoro-4-bora-3a,4a-diaza-s-indacene) moiety, synthesized on purpose. The constants are calculated by determining the fraction of BDP-SH deposited on the surface from a solution with a given molar fraction, directly measuring the absorption spectra of BDP-SH on the slides. Then, the exchange constant for the competitive deposition between 1-dodecanethiol and PEG5000 thiol is calculated by combining their exchange constants with BDP-SH. This allows to predict the fraction of the two colorless thiols coating the silver nanoparticles slides obtained from a toluene solution with a given molar fraction, for example, of PEG5000 thiol. The correctness of the calculated surface fraction is verified by studying the coating competition between 1-dodecanethiol and a PEG5000 thiol remotely modified with a strongly absorbing fluorescein fragment.     

Nanoscale properties of mixed fengycin/ceramide monolayers explored using atomic force microscopy

To gain insight into the interactions between fengycin and skin membrane lipids, mixed fengycin/ceramide monolayers were investigated using atomic force microscopy (AFM) (monolayers supported on mica) and surface pressure-area isotherms (monolayers at the air-water interface). AFM topographic images revealed phase separation in mixed monolayers prepared at 20 degrees C/pH 2 and composed of 0.25 and 0.5 fengycin molar ratios, in the form of two-dimensional (2-D) hexagonal crystalline domains of ceramide surrounded by a fengycin-enriched fluid phase. Surface pressure-area isotherms as well as friction and adhesion AFM images confirmed that the two phases had different molecular orientations: while ceramide formed a highly ordered phase with crystalline chain packing, fengycin exhibited a disordered fluid phase with the peptide ring lying horizontally on the substrate. Increasing the temperature and pH to values corresponding to the skin parameters, i.e., 37 degrees C/pH 5, was found to dramatically affect the film organization. At low fengycin molar ratio (0.25), the hexagonal ceramide domains transformed into round domains, while at higher ratio (0.5) these were shown to melt into a continuous fengycin/ceramide fluid phase. These observations were directly supported by the thermodynamic analysis (deviation from the additivity rule, excess of free energy) of the monolayer properties at the air-water interface. Accordingly, this study demonstrates that both the environmental conditions (temperature, pH) and fengycin concentration influence the molecular organization of mixed fengycin/ceramide monolayers. We believe that the ability to modulate the formation of 2-D domains in the skin membrane may be an important biological function of fengycin, which should be increasingly investigated in future pharmacological research.     

Molecular organization of a water-insoluble iridium(III) complex in mixed monolayers

In this work, organized mixed monolayers containing a cationic water-insoluble iridium(III) complex, Ir-dye, [Ir(ppy)(2)(tmphen)]PF(6), (tmphen = 3,4,7,8-tetramethyl-1,10-phenanthroline, and ppy = 2-phenylpyridine), and an anionic lipid matrix, DMPA, dimyristoyl-phosphatidic acid, with different molar proportions, were formed by the co-spreading method at the air-water interface. The presence of the dye at the interface, as well as the molecular organization of the mixed films, is deduced from surface techniques such as pi-A isotherms, Brewster angle microscopy (BAM) and reflection spectroscopy. The results obtained remark the formation of an equimolar mixed film, Ir-dye/DMPA = 1:1. BAM images reveal a whole homogeneous monolayer, with gradually increasing reflectivity along the compression process up to reaching the collapse of this equimolecular monolayer at pi approximately equal to 37 mNm(-1). Increasing the molar ratio of DMPA in the mixture, the excess of lipid molecules organizes themselves forming dark flower-like domains of pure DMPA at high surface pressures, coexisting with the mixed Ir-dye/DMPA = 1:1 monolayer. On the other hand, unstable mixed monolayers are obtained by using an initial dye surface concentration higher than the equimolecular one. These mixed Langmuir monolayers have been successfully transferred onto solid substrates by the LB (Langmuir-Blodgett) technique.     

Mixed DPPC/DPTAP monolayers at the air/water interface: influence of indolilo-3-acetic acid and selenate ions on the monolayer morphology

The interactions of mixed monolayers of two lipids, zwitterionic 1,2-dipalmitoyl-phosphatidylcholine (DPPC) and positively charged 1,2-dipalmitoyl-3-trimethylammonium-propane (DPTAP), with phytohormone indolilo-3-acetic acid (IAA) and selenate anions in the aqueous subphase were studied. For this purpose, isotherms of the surface pressure versus the mean molecular area were recorded. Domain formation was investigated by using Brewster angle microscopy (BAM). The method of grazing incidence X-ray diffraction (GIXD) was also applied for the characterization of the organization of lipid molecules in condensed monolayers. It was found that selenate ions contribute to monolayer condensation by neutralizing the positive net charge of mixed monolayers whereas IAA molecules penetrated the lipid monolayer, causing its expansion/fluidization. When both solutes were introduced into the subphase, a competition between them for interaction with the positively charged lipids in the monolayer was observed.     

Influence of temperature on microdomain organization of mixed cationic-zwitterionic lipidic monolayers at the air-water interface

The thermodynamic behavior of mixed DOTAP-DPPC monolayers at the air-water interface has been investigated in the temperature range from 15 to 45 degrees C, covering the temperature interval where the thermotropic phase transition of DPPC, from solid-like to liquid-like, takes place. Based on the regular solution theory, the miscibility of the two lipids in the mixed monolayer was evaluated in terms of the excess Gibbs free energy of mixing DeltaG(ex), activity coefficients f(1) and f(2) and interaction parameter omega between the two lipids. The mixed DOTAP-DPPC film was found to have positive deviations from ideality at low DOTAP mole fractions, indicating a phase-separated binary mixture. This effect depends on the temperature and is largely conditioned by the structural chain conformation of the DPPC lipid monolayer. The thermodynamic parameters associated to the stability and the miscibility of these two lipids in a monolayer structure have been discussed in the light of the phase diagram of the DOTAP-DPPC aqueous mixtures obtained from differential scanning calorimetry measurements. The correlation between the temperature behavior of DOTAP-DPPC monolayers and their bulk aqueous mixtures has been briefly discussed.     

Maxwell displacement current allows to study structural changes of gramicidin A in monolayers at the air-water interface

We applied methods of measurement Maxwell displacement current (MDC) pressure-area isotherms and dipole potential for analysis of the properties of gramicidin A (gA) and mixed gA/DMPC monolayers at an air-water interface. The MDC method allowed us to observe the kinetics of formation of secondary structure of gA in monolayers at an air-water interface. We showed, that secondary structure starts to form at rather low area per molecule at which gA monolayers are in gaseous state. Changes of the MDC during compression can be attributed to the reorientation of dipole moments in a gA double helix at area 7 nm(2)/molecule, followed by the formation of intertwined double helix of gA. The properties of gA in mixed monolayers depend on the molar fraction of gA/DMPC. At higher molar fractions of gA (around 0.5) the shape of the changes of dipole moment of mixed monolayer was similar to that for pure gA. The analysis of excess free energy in a gel (18( ) degrees C) and in a liquid-crystalline phase (28( ) degrees C) allowed us to show influence of the monolayer structural state on the interaction between gA and the phospholipids. In a gel state and at the gA/DMPC molar ratio below 0.17 the aggregates of gA were formed, while above this molar ratio gA interacts favorably with DMPC. In contrast, for DMPC in a liquid-crystalline state aggregation of gA was observed for all molar fractions studied. The effect of formation ordered structures between gA and DMPC is more pronounced at low temperatures.     

The controlling effect of pH on oxidation of Cr(III) by manganese oxide minerals

Effects of the subphase temperature on the surface pressure (pi)-area (A) isotherms of mixed monolayers of miltefosine (hexadecylphosphocholine), a potential anticancer drug, and cholesterol were investigated at the air/water interface, which were supplemented with Brewster angle microscopy (BAM) observations. Comparison of the collapse pressure values, mean molecular areas, excess areas and excess free energy of mixing between the mixed monolayer at various molar ratios and the pure component monolayers showed that, regardless of the subphase temperature, the investigated miltefosine-cholesterol system is much more stable than that the pure component monolayers, suggesting strong attractive interactions between miltefosine and cholesterol in mixed monolayers. As a consequence, it was postulated that stable "complexes" of the two components could form at the interface, for which stoichiometry may vary with the subphase temperature. Such "surface complexes" should be responsible for the contraction of the mean molecular area and thus the high stability of the mixed monolayer.     

Glycoprotein adsorption into bilirubin/cholesterol mixed monolayers at the air-water interface

The adsorption of α₁-acid glycoprotein into bilirubin/cholesterol mixed monolayers with various component molar ratios is investigated using surface pressure-area (π-A) isotherms and (dπ/dA)-A curves. The results showed that the surface area per molecule increased after the adsorption/insertion of glycoprotein molecules into the monolayers. The compressibility of mixed monolayers increased as a result of hydrogen bonding between bilirubin and glycoprotein molecules, while the interactions between bilirubin and cholesterol are weakened. The adsorption of glycoprotein into a monolayer induced changes in molecular surface area depending on the surface pressure and molar fraction of bilirubin. The transmission electron microscopy of mixed monolayers confirmed the insertion of glycoprotein particles of spherical shape with an average diameter of about 80 nm into the monolayer. The text was submitted by the authors in English.     

Friction of mixed and single-component aromatic monolayers in contacts of different adhesive strength

Friction force microscopy has been used to study single-component and mixed self-assembled monolayers of aminothiophenol and thiophenol on gold. The friction forces and transition pressures of mixed monolayers were intermediate to the ones of single-component monolayers, and varied systematically with composition. The strength of the adhesion was altered by working in dry N2 gas or in ethanol. In all systems studied, low adhesion (in ethanol) resulted in a linear dependence of the friction on load already at low loads, whereas high adhesion (in dry N2) gave an apparent area-dependence. However, for a given monolayer composition, similar transition pressures were observed in dry N2 and in ethanol, suggesting that the overall monolayer structure was not strongly altered by the presence of ethanol. Similar observations were made for very close-packed monolayers of octadecanethiol.     

胆固醇与磷脂酰乙醇胺/磷脂酰胆碱混合膜的热力学特性及其单层膜形态的AFM观察

研究了不同比例下胆固醇(Chol)对磷脂酰乙醇胺/磷脂酰胆碱(PE/PC,1∶1物质的量比)混合膜的影响,并在表面压力-平均分子面积(π-A曲线)等温线基础上,通过对过量平均分子面积(ΔAex)和过量吉布斯自由能(ΔGex)的计算分析,研究了不同比例Chol与PE/PC(1∶1物质的量比)三元混合膜的热力学特性.实验结果表明:Chol在一定程度上加速了混合膜的相变,增强了膜的凝聚性;当XChol=0.2,0.6,0.8时,过量平均分子面积和过量吉布斯自由能在所研究的表面压力下都为负值,分子之间相互作用力表现为引力,促使混合膜的凝聚,而在XChol=0.4时,过量平均分子面积和过量吉布斯自由能在15,20,25,30 mN/m下为正值,分子之间相互作用力表现为斥力,促使熵的增加,并且在20 mN/m压力下出现极值.实验中利用LB膜技术制备了不同比例Chol与PE/PC(1∶1物质的量比)混合膜,并在原子力显微镜下对其结构形态进行了观测.     

Effects of Calcium Ions on Thermodynamic Properties of Mixed Bilirubin/Cholesterol Monolayers

The mixed monolayer behavior of bilirubin/cholesterol was studied through surface pressure-area (?-A) isotherms on aqueous solutions containing various concentrations of calcium ions. Based on the data of ?-A isotherms, the mean area per molecule, collapse pressure, surface compressibility modulus, excess molecular areas, free energy of mixing, and excess free energy of mixing of the monolayers on different subphases were calculated. The results show an expansion in the structure of the mixed monolayer with Ca2+ in subphase, and non-ideal mixing of the components at the air/water interface is observed with positive deviation from the additivity rule in the excess molecular areas. The miscibility between the components is weakened with the increase of concentration of Ca2+ in subphase. The facts indicate the presence of coordination between Ca2+ and the two components. The mixed monolayer, in which the molar ratio of bilirubin to cholesterol is 3:2, is more stable from a thermodynamic point of view on pure water. But the stable 3:2 stoichiometry complex is destroyed with the increase of the concentration of Ca2+ in subphase. Otherwise, the mixed monolayers have more thermodynamic stability at lower surface pressure on Ca2+ subphase.     

Self-assembly of Acridine Orange into H-aggregates at the air/water interface: tuning of orientation of headgroup

The surface active derivative of the organic dye Acridine Orange (N-10-dodecyl-acridine orange (DAO)) has been included in mixed Langmuir monolayers with stearic acid (SA). The maximum relative content on DAO for a stable mixed monolayer is a molar ratio of X(DAO) = 0.5. Brewster angle microscopy (BAM) reveals a high homogeneity at the micrometer level for the mixed monolayer in equimolar proportion (X(DAO) = 0.5), whereas the appearance of domains occurs for lower content of DAO, i.e., X(DAO) = 0.2 and 0.1. The aggregation of the DAO headgroup leads to well-defined H-aggregates at the air/water interface for those mixed monolayers with a low content of DAO. However, for the mixed monolayers enriched in DAO, e.g., X(DAO) = 0.5, the molecular crowding prevents the formation of defined supramolecular structures. Molecular organization and tilting of the DAO headgroup is quantitatively analyzed by in situ UV-visible reflection spectroscopy. The formation of H-aggregates of the DAO headgroup can be reversibly tuned with the applied surface pressure. A molecular mechanism for the conformational rearrangement of the DAO molecule is proposed using RM1 quantum semiempirical calculations.     

Thermodynamic characterization of the prevailing molecular interactions in mixed floating monolayers of phospholipids and usnic acid

The investigation of the characteristics of mixed floating monolayers of phospholipids and usnic acid (UA), an active metabolite from lichens, can provide valuable information on how to prepare stable liposomes that could serve as carriers of UA for therapeutic proposes. The present paper is concerned with the thermodynamic analysis of the behavior of Langmuir monolayers formed by mixing different phospholipids (dibehenoylphosphatidylcholine, DBPC, dipalmitoylphosphatidylcholine, DPPC, and dioleoylphosphatidylcholine, DOPC) and UA at varied molar fractions. Relevant thermodynamic parameters such as excess areas, excess free energies and free energy of mixing were derived from the surface pressure data obtained from compression measurements performed in a Langmuir trough. For the largest lateral pressure examined (25 mN/m), negative values of the excess free energy were found only for the DOPC/UA monolayer, which should be the most stable of them. Based on the calculated values of the free energy of mixing, we note that the DBPC/UA and DPPC/UA systems present the best mixed character at low pressures and when the molar fraction of the UA is 0.5; at that relative concentration and at low values of the external pressure, the UA molecules can better mix and interact with the phospholipid molecules. The compression isotherms for mixed monolayers show no visible transitions, exhibiting a more organized phase that corresponds to a negative free energy of mixing. We have established that the most stable monolayers were those corresponding to DOPC/UA mixtures with a UA molar fraction of 0.75.     

Miltefosine-cholesterol interactions: a monolayer study

Mixed Langmuir monolayers of miltefosine (hexadecylphosphocholine) and cholesterol have been investigated by recording surface pressure-area (pi-A) isotherms at different subphase pHs (2, 6, and 10) and temperatures (10, 20, 25, and 30 degrees C). The change of both pH and temperature within the investigated range does not modify significantly the behavior of mixed films. The most pronounced effect involves condensation of the miltefosine monolayer by cholesterol, which diminishes in the following order: pH 6 > pH 2 > pH 10. The analyses of pi-A and compressibility modulus dependencies indicate the existence of interactions in the investigated system; at pH 2 and 6, the strongest were found to occur for the mixed film of miltefosine molar fraction (XM) between 0.6 and 0.7 (mean value, 0.66). Such a composition corresponds to the stable complex formation wherein 2 miltefosine molecules and 1 molecule of cholesterol are strongly bound together, mainly by attractive hydrophobic forces between their apolar tails. However, at pH 10 the highest stability occurs for mixtures containing a smaller proportion of miltefosine (XM = 0.5), which means that on alkaline subphases the ability to condense the miltefosine monolayer by cholesterol is less efficient as it requires a higher proportion of cholesterol (1:1 as compared to 1:2 at pH 2 and 6) to attain the maximum stability of the mixed film. The attractive forces between miltefosine and cholesterol are also weaker at pH 10 due to a greater solvatation of the miltefosine polar group. A similar trend is observed on increasing subphase temperature, when monolayers are more expanded.     

Gold nanoparticle self-assembly in two-component lipid Langmuir monolayers

Self-assembly processes are considered to be fundamental factors in supramolecular chemistry. Langmuir monolayers of surfactants or lipids have been shown to constitute effective 2D "templates" for self-assembled nanoparticles and colloids. Here we show that alkyl-coated gold nanoparticles (Au NPs) adopt distinct configurations when incorporated within Langmuir monolayers comprising two lipid components at different mole ratios. Thermodynamic and microscopy analyses reveal that the organization of the Au NP aggregates is governed by both lipid components. In particular, we show that the configurations of the NP assemblies were significantly affected by the extent of molecular interactions between the two lipid components within the monolayer and the monolayer phases formed by each individual lipid. This study demonstrates that multicomponent Langmuir monolayers significantly modulate the self-assembly properties of embedded Au NPs and that parameters such as the monolayer composition, surface pressure, and temperature significantly affect the 2D nanoparticle organization.     

Surface miscibility of EPC/DOTAP/DOPE in binary and ternary mixed monolayers

Surface pressure (π)-molecular area (A) curves were used to characterize the packing of pseudo-ternary mixed Langmuir monolayers of egg phosphatidylcholine (EPC), 1,2-dioleoyl-3-trimethylammonium propane (DOTAP) and L-α-dioleoyl phosphatidylethanolamine (DOPE). This pseudo-ternary mixture EPC/DOPE/DOTAP has been successfully employed in liposome formulations designed for DNA non-viral vectors. Pseudo-binary mixtures were also studied as a control. Miscibility behavior was inferred from π-A curves applying the additivity rule by calculating the excess free energy of mixture (ΔG(Exc)). The interaction between the lipids was also deduced from the surface compressional modulus (C(s)(-1)). The deviation from ideality shows dependence on the lipid polar head type and monolayer composition. For lower DOPE concentrations, the forces are predominantly attractive. However, if the monolayer is DOPE rich, the DOTAP presence disturbs the PE-PE intermolecular interaction and the net interaction is then repulsive. The ternary monolayer EPC/DOPE/DOTAP presented itself in two configurations, modulated by the DOPE content, in a similar behavior to the DOPE/DOTAP monolayers. These results contribute to the understanding of the lipid interactions and packing in self-assembled systems associated with the in vitro and in vivo stability of liposomes.     

Studies on Mixed Monolayers and Langmuir-Blodgett Films of Schiff-Base Complex Cu(SBC(18))(2) and Calix

Mixed monolayers of Schiff-base complex Cu(SBC(18))(2) with an octadecyl hydrocarbon chain and Calix[4]arene without a long alkyl chain at an air/water interface were studied in ultrapure water at different temperatures. Interface behavior and thermodynamic estimation of the mixed monolayer indicate that a strong intermolecular interaction exists between the mixed components (Cu(SBC(18))(2) and calix[4]arene) and the two-dimensional miscibility decreases with the molar fraction of Cu(SBC(18))(2). It is noticeable that the calix[4]arene monolayer can be transferred successfully onto solid substrates due to the introduction of Cu(SBC(18))(2). FTIR transmission and UV-Vis absorption spectra of mixed LB films provide further evidence of molecular interaction between the headgroups. Copyright 2001 Academic Press.     

Activation and inhibition of lipoprotein lipase in mixed monolayers of medium or long chain-triglycerides and phospholipids

 We evaluated the activation and inhibition effects of phosphatidylcholine (PC) and sphingomyelin (SM) on lipoprotein lipase (LPL) for medium or long chain-triglycerides (TG) in monolayers at the air/water interface. Monolayers of medium chain-TG, being in an expanded state at a surface pressure of 15 mN/m, showed low susceptibility to LPL in the subphase. Adding 50 mole% of PC or SM into these monolayers reduced the partial molecular area of the TG and enhanced the LPL activity. Monolayers of long chain-TG, being in a condensed state, showed high susceptibility of LPL either with or without PC. SM added to the long chain-TG monolayers, however, inhibited the LPL action. We investigated the interaction between TG and phospholipid on the basis of the collapse pressure-measurements of mixed monolayers. For medium chain-TG monolayers, PC and SM gave similar collapse pressure-composition profiles. Contrary to this, SM gave a markedly higher collapse pressure of long chain-TG than PC: SM stabilized the monolayer state of long chain-TG. These results suggested that I) orientation of the acyl chains of TG molecule in a monolayer is crucial for the LPL activity, and that II) strong interaction between SM and long chain-TG retards the substrate-transfer from the mixed monolayer to the catalytic pocket of LPL. Received: 6 March 1996 Accepted: 19 July 1996     

Effect of membrane composition on surface states of ganglioside GM1/dipalmitoylphosphatidylcholine/dioleoylphosphatidylcholine monolayers

The surface states of ganglioside GM1 (GM1)/dipalmitoylphosphatidylcholine (DPPC)/dioleoylphosphatidylcholine (DOPC) monolayers having various compositions were investigated using atomic force microscopy (AFM), and the effect of the composition on the surface states of the membrane was examined. The AFM images for the ternary system showed a DPPC-rich phase containing GM1 in the DOPC matrix, which indicated that the morphology varied as the composition of the monolayers changed. The AFM images for the GM1/DPPC/DOPC monolayers having (2:9:9) and (4:18:9) molar ratios showed a percolation pattern similar to that observed for the GM1/DPPC (1:9) monolayer. The AFM image for the GM1/DPPC/DOPC (2:18:9) monolayer showed a dotted pattern with a high topography. Monolayers having a higher content of DOPC than DPPC and/or having a higher content of GM1 showed dot-like domains in the DPPC-rich phase containing GM1. In conclusion, the surface states of GM1/DPPC/DOPC monolayers changed depending on the composition. These results may be related to a diversity of GM1 in various organs.