Ionic liquid‐bonded polysiloxane as stationary phase for capillary gas chromatography

Ionic liquid (IL) stationary phase is especially suitable for separation of complex samples, owing to the “dual nature” of IL. In this study, a synthetic method of ionic liquid‐bonded polysiloxane (PSOIL) as stationary phase of GC was proposed. Then, the PSOIL was used to prepare an 8 m capillary column by static method. The column efficiency was measured to be about 4000 plates/m (k=3.55, naphthalene) after the column had been conditioned at 210°C. The durability of PSOIL column was better than that of the mixed stationary phase of IL and OV‐1. Moreover, the Abraham solvation parameter model was employed to characterize the PSOIL. The result revealed that the PSOIL had stronger dispersion force (l) than neat IL and stronger hydrogen bond basicity (a) than DB‐1. That meant the PSOIL might offer good selectivity for both polar and non‐polar analytes. The column exhibited unique selectivity for various organic substances, such as the homologous compounds of alkanes, esters, alcohols and aromatic compounds. It was also found that some aromatic positional isomers could be separated better on the PSOIL column than on the DB‐1 column. Furthermore, the stationary phase was suitable for separation of high‐boiling point compounds such as polycyclic aromatic hydrocarbons, phthalic esters, etc. All of these demonstrated that the PSOIL offered good selectivity and high separation efficiency for a wide range of analytes.     

High temperature and highly selective stationary phases of ionic liquid bonded polysiloxanes for gas chromatography

Due to the special performance of “dual nature” and synthetic flexibility, ionic liquids (ILs) have been an attractive research subject of stationary phases for gas chromatography (GC). In this work, a novel ionic liquid (IL) bonded polysiloxane ([PSOMIM][NTf₂]) with anion of bis-trifluoromethanesulfonylimide (NTf₂⁻) was synthesized, and another one with chloride anion ([PSOMIM][Cl]) was also prepared for the purpose of comparison. The thermo-stability of the product was evaluated by thermogravimetric (TG) test and the result indicated that [PSOMIM][NTf₂] did not decompose slightly until 380 °C. Then the solvation behaviors of the ILs were characterized using solvation parameter model. Subsequently, [PSOMIM][NTf₂] and [PSOMIM][Cl] were used as stationary phases to prepare capillary columns for GC, respectively. The column efficiency of [PSOMIM][NTf₂] column was 4776 plates/m (k = 3.64 ± 0.08, naphthalene), and that of the other one was 3170 plates/m (k = 2.84 ± 0.11, naphthalene). The selectivity of the novel stationary phases for analytes, including Grob reagent, aromatic positional isomers was further evaluated. Furthermore, the chromatograms of n-alkanes and polycyclic aromatic hydrocarbons (PAHs) on [PSOMIM][NTf₂] column were compared with that on [PSOMIM][Cl] column. [PSOMIM][NTf₂] stationary phase also exerted good selectivity for fatty acid methyl esters (FAMEs), polychlorinated biphenyls (PCBs) and aromatic amines.     

Novel guanidinium-based ionic liquids as stationary phases for capillary gas chromatography

<正>The present study describes guanidinium-based ionic liquids(GBILs) as stationary phases for capillary gas chromatography (CGC) and to the best of our knowledge,no related reports are available up to now.In this study,a hexaalkylguanidinium ionic liquid(DOTMG-NTf_2) was synthesized and coated statically onto capillary columns.Selectivity of the stationary phase was evaluated by separating Grob test mixture,test mixture,alcohols mixture,and fatty acid methyl esters mixture,and thermal stability was investigated as well.The present study demonstrates that GBILs as CGC stationary phases exhibit satisfactory selectivity and thermal stability and have a great potential as new candidates for CGC stationary phases.     

Selectivity of guanidinium ionic liquid for capillary gas chromatography

<正>A guanidinium ionic liquid,N,N,N',N'-tetrahexyl-N",N"-dimethylguanidinium bis(trifluoromethane)sulfonylimide(THDMGNTf_2), was synthesized and used as stationary phase for capillary gas chromatography.In comparison with imidazolium ionic liquid stationary phase,the present new stationary phase exhibits quite different selectivity and behaves more like a low polar stationary phase.The guanidinium ionic liquid of THDMG-NTf_2 exhibited better separation of Grab test mixture than imidazolium ionic liquid of 1-octyl-3-butylimidazolium bis(trifluoromethane)sulfonylimide(OBIM-NTf_2).Solvation parameter model was also used to evaluate the selectivity of THDMG-NTf_2.Additionally,essential oil of Magnolia biondii Pamp was analyzed to further evaluate the selectivity of THDMG-NTf_2 for a sample of complicated components.Satisfactory separation of the essential oil was achieved on a THDMG-NTf_2 column(10 m) while using a commercial column(30 m) as reference.The present study shows that the guanidinium ionic liquid possesses novel chromatographic selectivity and has great potential for wide applications.     

Polarizable biphenyl polysiloxane stationary phase for capillary column gas chromatography

A crosslinkable biphenylmethylpolysiloxane stationary phase was synthesized for capillary column gas chromatography and compared with methyl, phenyl, and cyanopropyl polysiloxane stationary phases for the separation of isomeric polycyclic aromatic compounds. While the new phase gave similar separations of nonpolar isomers when compared to the nonpolar phases, separations of polar isomers were greatly improved because of the induced polarity of the biphenyl group of the stationary phase by the solute molecules. This polarizable stationary phase offers a unique selectivity which is not available in other stationary phases.     

Autocrosslinkable methyl-2-phenylethylpolysiloxane stationary phase for capillary column gas chromatography

Methyl-2-phenylethylpolysiloxane polymers have been synthesized for comparison with methylphenylpolysiloxane stationary phases for gas chromatography. The 50% 2-phenylethyl polysiloxane was found to be autocrosslinkable at 260°C without addition of free redical initiator. Although the selectivity of this phase appears to be similar to the 50% phenyl polysiloxane, its thermal stability is not as high.     

Retention behaviors of novel ionic liquid stationary phases and their selectivity for capillary gas chromatography

<正>One chloride-terminated ionic liquid(CTIL) and two hydroxyl-terminated ionic liquids(HTILs) were synthesized and used as stationary phases for capillary gas chromatography(CGC).Molecular interactions of these stationary phases were evaluated by Abraham solvation parameter model,indicating that the CTIL exhibits remarkably strong H-bond basicity and the HTILs possess both H-bond basicity and acidity.The molecular interactions were further confirmed by separation of a complex mixture consisting of ketones,aldehydes,esters,alcohols and aromatic compounds.It was found that the obtained solvation parameters correlate well with the chromatographic performances of the analytes in terms of elution order and resolution.The well correlated relationship between the solvation parameters and the selectivity of the CTIL and HTILs stationary phases is quite helpful in predicting and understanding the retention behaviors of different types of analytes on these stationary phases.     

Ionic liquid stationary phases for gas chromatography

This article provides a summary of the development of ionic liquids as stationary phases for gas chromatography beginning with early work on packed columns that established details of the retention mechanism and established working methods to characterize selectivity differences compared with molecular stationary phases through the modern development of multi-centered cation and cross-linked ionic liquids for high-temperature applications in capillary gas chromatography. Since there are many reviews on ionic liquids dealing with all aspects of their chemical and physical properties, the emphasis in this article is placed on the role of gas chromatography played in the design of ionic liquids of low melting point, high thermal stability, high viscosity, and variable selectivity for separations. Ionic liquids provide unprecedented opportunities for extending the selectivity range and temperature-operating range of columns for gas chromatography, an area of separation science that has otherwise been almost stagnant for over a decade.     

Characterization of hexacationic imidazolium ionic liquids as effective and highly stable gas chromatography stationary phases

Polycationic ionic liquids (ILs) are an attractive class of ILs with great potential applicability as gas chromatography stationary phases. A family of hexacationic imidazolium ILs derived from the cycloalkanol family was chemically first prepared in a straightforward manner and then applied for analytical separation purposes. Four tuneable engineering vectors, namely cation ring size structure, anion nature, spatial disposition of cycloalkanol substituents and O‐substitution, were considered as experimental parameters for the design of the desired ionic liquids. A total number of five new phases based on a common benzene core respectively exhibited column efficiencies around to 2500 plates/m, broad operating temperature ranges and also, even more importantly, good thermal stabilities (bleeding temperature between 260 and 365°C), finding variations in the selectivity and analytes elution orders depending on the IL structures. Their solvation characteristics were evaluated using the Abraham solvation parameter model, establishing clear correlations between their cation structure and retention capability with respect to certain analytes. The study of relationships between the ILs structure and solvation parameters gives us an idea of the IL stationary phase to be used for specific separations.     

Evaluating the solvation properties of functionalized ionic liquids with varied cation/anion composition using the solvation parameter model

Ionic liquids (ILs) are promising gas chromatography (GC) stationary phases due to their high thermal stability, negligible vapor pressure, and ability to solvate a broad range of analytes. The tunability of ILs allows for structure modification in pursuit of enhanced separation selectivity and control of analyte elution order. In this study, the solvation parameter model is used to characterize the solvation interactions of fifteen ILs containing various cationic functional groups (i.e., dimethylamino, hydroxyl, and ether) and cation types paired with various counter anions, namely, tris(pentafluoroethyl)trifluorophosphate (FAP(-)), bis[(trifluoromethyl)sulfonyl]imide (NTf(2)(-)), thiocyanate (SCN(-)), tricyanomethide (C(CN)(3)(-)), tetracyanoborate (B(CN)(4)(-)), and bis[oxalate(2-)]borate (BOB(-)). The presence of functional groups affected the hydrogen bond basicity, hydrogen bond acidity, as well as dispersion interactions of the resulting ILs, while the change of cation type yielded modest influence on the dipolarity. The switch of counter anions in unfunctionalized ILs produced compounds with higher dipolarity and hydrogen bond basicity. The dipolarity and hydrogen bond basicity of ILs possessing cyano-containing anions appeared to be inversely proportional to the cyano content of the anion. The modification of IL structure resulted in a significant effect on the retention behavior as well as separation selectivity for many solutes, including reversed elution orders of some analytes. This study provides one of the most comprehensive examinations up-to-date on the relation between IL structure and the resulting solvation characteristics and gives tremendous insight into choosing suitable ILs as GC stationary phases for solute specific separations.     

Nonextractable cyanopropyl polysiloxane stationary phases for capillary chromatography

Summary Crosslinkable cyanopropylpolysiloxane stationary phases have been difficult to produce because of steric effects of the large cyanopropyl groups or because of the interaction between the polar cyanopropyl groups and the groups added for crosslinking. Various polymers containing 50% to 90% cyanopropyl were synthesized which contained vinyl,p-tolyl, or 4-vinylphenyl groups for crosslinking. Thep-tolyl group was found to give satisfactory crosslinking if there were two such groups attached to one silicon atom.     

Retention characteristics of organic compounds on molten salt and ionic liquid-based gas chromatography stationary phases

The interest of using ionic liquids (ILs) as stationary phases in gas chromatography (GC) has increased in recent years. This is largely due to the fact that new classes of ILs are being developed that are capable of satisfying many of the requirements of GC stationary phases. This review highlights the major requirements of GC stationary phases and describes how molten salts/ILs can be designed to largely meet these needs. The retention characteristics of organic solutes will be discussed for ammonium, pyridinium, and phosphonium-based molten salts followed by imidazolium, pyridinium, pyrollidinium, and phosphonium-based IL stationary phases. The versatility of ILs allows for the development of stationary phases based on dicationic ILs, polymeric ILs, and IL mixtures. To aid in choosing the appropriate IL stationary phase for a particular separation, the reader is guided through the different types of stationary phases available to identify those capable of providing the desired separation selectivity of organic solutes while allowing for flexibility in ranges of temperature used throughout the separation.     

Evaluation of smectic biphenylcarboxylate ester liquid-crystalline polysiloxane stationary phases for capillary column gas chromatography

Mesomorphic biphenylcarboxylate esters were coupled via flexible aliphatic hydrocarbon spacers to a polysiloxane backbone. The influence of spacer length, percent mesomorphic substitution, and crosslinking of the stationary phase on liquid-crystalline transition temperatures and on chromatographic performance was investigated. Unique selectivity and good efficiency over a wide temperature range for gum and cross-linked liquid-crystalline phases were demonstrated by the separation of various isomeric polycyclic aromatic compounds.     

Polymeric imidazolium ionic liquids as valuable stationary phases in gas chromatography: Chemical synthesis and full characterization

Seven new functionalized polymerizable ionic liquids were chemically prepared, and later applied for the preparation of polymeric stationary phases in gas chromatography. These coated GC columns, which exhibited good thermal stabilities (240–300 °C) and very high efficiencies (3120–4200 plates/m), have been characterized using the Abraham solvation parameter model. The chromatographic behavior of these polymeric IL columns has been deeply studied observing excellent selectivities in the separation of many organic substances such as alkanes, ketones, alcohols, amines or esters in mixtures of polar and non polar solvents or fragrances. Remarkably, the challenging separation of xylene isomers has been possible using a bis(trifluoromethylsulfonyl)amide based imidazolium IL coated column as a gas chromatography stationary phase.     

聚硅氧烷键合离子液体的合成及色谱性能

提出了一种基于聚硅氧烷键合离子液体(PSOIL)的气相色谱固定相的方法, 即首先合成γ-氯丙基聚硅氧烷, 然后通过氯丙基与甲基咪唑的反应合成了聚硅氧烷负载的离子液体, 并对其色谱性能及分离选择性进行了评价.     

Enhanced resolution of Mentha piperita volatile fraction using a novel medium‐polarity ionic liquid gas chromatography stationary phase

The evaluation of a novel medium‐polarity ionic‐liquid‐based gas chromatography column, SLB‐IL60, towards the analysis of a complex essential oil, namely, a peppermint essential oil sample, is reported. The SLB‐IL60 30 m column was subjected to bleeding measurements, by means of conventional gas chromatography with mass spectrometry. The SLB‐IL60 column was then evaluated in the analysis of pure standard compounds, chosen as typical constituents of peppermint essential oil. Resolution and peak symmetry (expressed as tailing factors at 10% of peak height) were measured and the results were compared to those obtained on the most widely used columns in such an application, namely a medium‐polarity [100% poly(ethyleneglycol)] stationary phase, and an apolar 5% diphenyl/95% dimethyl siloxane. The final part of the evaluation was dedicated to the gas chromatography with mass spectrometry analysis of a peppermint essential oil sample and again the data were compared to those obtained on the 100% poly(ethyleneglycol) and the 5% diphenyl/95% dimethyl siloxane phase. Linear retention indices were determined for all the identified components on the ionic liquid capillary.     

聚硅氧烷键合的离子液体用作高温气相色谱固定相的研究

合成了阴离子为二(三氟甲基磺酸酰)亚胺(NTf-2)的新型聚硅氧烷键合离子液体 ([PSOMIm][NTf2]),并采用静态涂渍法,制备了毛细管气相色谱柱.该固定相具有良好的热稳定性.热重测试显示,温度高于380 ℃后,[PSOMIm][NTf2]开始缓慢分解.色谱性能评价显示,此固定相对多种异构体和同系物均具有良好的分离选择性和高的热稳定性.对Grob试剂的分离结果表明,各种组分均能在柱上得到良好的分离且峰的对称性很好.此新型聚合物离子液体在高温气相色谱固定相的研究和应用方面具有较大的潜力.     

Development of a carbohydrate silylation method in ionic liquids for their gas chromatographic analysis

This paper reports on the feasibility of silylation of low molecular weight carbohydrates dissolved in different ionic liquids (ILs) for their further analysis by gas chromatography (GC). Derivatization reagents (nature and amounts), temperature and time of reaction and stirring conditions were evaluated for different carbohydrates (i.e., glucose, mannose, fructose and lactose) dissolved in 1-ethyl-3-methylimidazolium dicyanamide [EMIM][DCA]. Evaluation of conformational isomerism of glucose dissolved in [EMIM][DCA] revealed the effect of the time of dissolution in the equilibration of α- and β-furanoses (up to 3% and 6%, respectively, after 70 h of incubation) and that 21 h sufficed to obtain results similar to those provided by the reference method involving pyridine. Once optimized, the proposed derivatization procedure provided satisfactory yields (i.e., close to 100%) using 100 μL of trimethylsilylimidazole (TMSI) at mild conditions (25 °C) for a relatively short time (1 h) for most of the investigated carbohydrates. Under these experimental conditions, linear responses (i.e., R² better than 0.974) were obtained in the tested range of 0.25–1 mg of the derivatized target compounds. Other reagents, such as N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) + 1% trimethylchlorosilane (TMCS), were successfully used under ultrasonic conditions for aldose monosaccharides and disaccharides derivatization, while BSTFA was useful for ketose monosaccharides. The possibility of using the proposed method for the derivatization of selected carbohydrates dissolved in different ILs and the efficiency of the method applied to the analysis of carbohydrates present in real samples (fruit juices) have also been investigated.     

Preparation of polysiloxane stationary phases for capillary column chromatography: A New methoxyphenyl phase

Contemporary methods for the synthesis of alkyl- and arylsubstituted polysiloxane stationary phases are reviewed. A new, moderately polar phase containing the 3-(4-methoxyphenyl)-propyl group is reported.     

Use of a long-spacer-side-chain liquid crystalline polysiloxane containing a crown ether as a stationary phase for capillary gas chromatography

A new kind of side chain liquid crystalline polysiloxane containing a crown ether with a longer spacer (PSC-11) has been prepared and coated on a fused silica capillary column. The main chroma-tographic characteristics including efficiency, polarity, and selectivity have been examined. The phase exhibits the retention properties of both liquid crystal and crown ether stationary phases and possesses higher efficiency and better selectivity than PSC-3, which has a shorter spacer between the main polysiloxane chain and liquid crystalline side chain.