Formation of spherical nanostructures by the controlled aggregation of gold colloids

Stable suspensions of size-uniform spherical assemblies of 5-8 nm gold colloids in toluene are readily obtained by cross linking the colloidal particles using alkanedithiols within a defined range of gold-dithiol molar ratios. The assemblies are very stable and remain suspended in toluene for several months without significant aggregation. These porous gold spheres can be further organized into hierarchically assembled relatively linear chains by the addition of ethanol.     

Ultrathin gold nanowires can be obtained by reducing polymeric strands of oleylamine-AuCl complexes formed via aurophilic interaction

This Communication describes a facile route to the preparation of ultrathin gold nanowires using linear chains formed from [(oleylamine)AuCl] complex via aurophilic interaction. The linear chains, with AuI...AuI bonds as the backbone and surrounded by oleylamines, can group together to form bundles of polymeric strands. When the AuI was reduced to Au0 by reacting with Ag nanoparticles in hexane, the polymeric strands functioned as both the source of Au and the template to mediate the nucleation and growth of Au nanowires. Using this method, we were able to produce Au nanowires with an average diameter of approximately 1.8 nm and an aspect ratio of >1000 in high yields (approximately 70%).     

Adsorption of cellulose derivatives on flat gold surfaces and on spherical gold particles

The adsorption of hydroxyethylcellulose (HEC), ethyl(hydroxyethyl)cellulose (EHEC), and their hydrophobically modified counterparts HM-HEC and HM-EHEC has been studied on planar gold and citrate-covered gold surfaces by means of quartz crystal microbalance with dissipation monitoring (QCM-D), and on citrate-covered gold particles with the aid of dynamic light scattering (DLS). The QCM-D results indicate that larger amounts of polymer are adsorbed from aqueous solutions of HM-HEC and HM-EHEC on both substrates than from solutions of their unmodified analogues. The adsorption affinity for all the polymers, except EHEC, is higher on the citrate-covered surfaces than on the bare gold substrate. This indicates that more adsorption sites are activated in the presence of the citrate layer. The experimental adsorption data for all the polymers can be described fairly well by the Langmuir adsorption isotherm. However, at very low polymer concentrations significant deviations from the model are observed. The value of the hydrodynamic thickness of the adsorbed polymer layer (delta h), determined from DLS, rises with increasing polymer concentration for all the cellulose derivatives; a Langmuir type of isotherm can be used to roughly describe the adsorption behavior. Because of good solvent conditions for HEC the chains extend far out in the bulk at higher concentrations and the value of delta h is much higher than that of HM-HEC. The adsorption of EHEC and HM-EHEC onto gold particles discloses that the values of delta h are considerably higher for the hydrophobically modified cellulose derivative, and this finding is compatible with the trend in layer thickness estimated from the QCM-D measurements.     

Ellipsometric study of anodic oxide films formed on niobium surfaces

Anodic oxide films formed potentiostatically on niobium surfaces, from open circuit potential (OCP) to 10 V, were studied by performing in situ and ex situ ellipsometric measurements. The kinetics of the film thickness growth in 1 M H₂SO₄ and complex indices of refraction of these films were determined. A strong influence of the surface preparation conditions on the complex refractive indices of the metal substrate and anodic oxide films was shown. By steady-state measurements at OCP, a small thickening of the natural air-formed oxide film with chemical composition Nb₂O₅ in 1 M H₂SO₄ solution was detected. With cathodic pre-treatment, only partial reduction and small thinning of the natural air-formed oxide film was possible. The thicknesses of the natural air-formed oxide films on fine mechanically polished and electropolished Nb surfaces were determined. The build up of the natural air-formed oxide film, at ex situ conditions, on the already formed anodic oxide films was confirmed. It was shown that electropolishing gives more similar optical surface properties to the bare metal than the fine mechanical polishing. Electronic Publication     

Effect of hydrophobicity on the stability of the wetting films of water formed on gold surfaces

We have developed a methodology that can be used to determine disjoining pressures (Π) in both stable and unstable wetting films from the spatial and temporal profiles of dynamic wetting films. The results show that wetting films drain initially by the capillary pressure created by the changes in curvature at the air/water interface and subsequently by the disjoining pressure created by surface forces. The drainage rate of the film formed on a gold surface with a receding contact angle (θ(r)) of 17° decreases with film thickness due to a corresponding increase in positive Π, resulting in the formation of a stable film. The wetting film formed on a hydrophobic gold with θ(r)=81° drains much faster due to the presence of negative Π in the film, resulting in film rupture. Analysis of the experimental data using the Frumkin-Derjaguin isotherm suggests that short-range hydrophobic forces are responsible for film rupture and long-range hydrophobic forces accelerate film thinning.     

Detachment of deposited colloids by advancing and receding air-water interfaces

Moving air-water interfaces can detach colloidal particles from stationary surfaces. The objective of this study was to quantify the effects of advancing and receding air-water interfaces on colloid detachment as a function of interface velocity. We deposited fluorescent, negatively charged, carboxylate-modified polystyrene colloids (diameter of 1 μm) into a cylindrical glass channel. The colloids were hydrophilic with an advancing air-water contact angle of 60° and a receding contact angle of 40°. After colloid deposition, two air bubbles were sequentially introduced into the glass channel and passed through the channel at different velocities (0.5, 7.7, 72, 982, and 10,800 cm/h). The passage of the bubbles represented a sequence of receding and advancing air-water interfaces. Colloids remaining in the glass channel after each interface passage were visualized with confocal microscopy and quantified by image analysis. The advancing air-water interface was significantly more effective in detaching colloids from the glass surface than the receding interface. Most of the colloids were detached during the first passage of the advancing air-water interface, while the subsequent interface passages did not remove significant amounts of colloids. Forces acting on the colloids calculated from theory corroborate our experimental results, and confirm that the detachment forces (surface tension forces) during the advancing air-water interface movement were stronger than during the receding movement. Theory indicates that, for hydrophilic colloids, the advancing interface movement generally exerts a stronger detachment force than the receding, except when the hysteresis of the colloid-air-water contact angle is small and that of the channel-air-water contact angle is large.     

Hollow nanostructures of platinum with controllable dimensions can be synthesized by templating against selenium nanowires and colloids

Hollow nanostructures of platinum have been synthesized by reducing PtCl2 with alcohol in the presence of selenium nanowires or colloids. The Se template could be removed by soaking the resultant Se@Pt nanostructures in hydrazine or by heating them to 200-250 degrees C. The size and wall thickness of the polycrystalline hollow nanostructures could be controlled by varying the template, reaction time, and the concentration of PtCl2.     

The influence of fluoride on the physicochemical properties of anodic oxide films formed on titanium surfaces

The influence of fluoride (and its concentration) on the electrochemical and semiconducting properties of anodic oxide films formed on titanium surfaces was investigated by performing electrochemical measurements (potentiodynamic/pontiostatic polarization, open circuit potential (OCP), and capacitance measurements) for a titanium/oxide film/solution interface system in fluoride-containing 1.0 M HClO(4) solution. On the basis of the Mott-Schottky analysis, and with taking into account both the surface reactions (or, say, the specifically chemical adsorption) of fluoride ions at the oxide film surface and the migration/intercalation of fluoride ions into the oxide film, the changes in the electrochemical behavior of titanium measured in this work (e.g., the blocked anodic oxygen evolution, the increased anodic steady-state current density, the positively shifted flat band potential, and the positively shifted film breakdown potential) were interpreted by the changes in the surface and the bulk physicochemical properties (e.g., the surface charges, surface state density, doping concentration, and the interfacial potential drops) of the anodic films grown on titanium. The fluoride concentrations tested in this work can be divided into three groups according to their effect on the electrochemical behavior of the oxide films: < or =0.001 M, 0.001-0.01 M, and >0.01 M. By tracing the changes of the OCP of the passivated titanium in fluoride-containing solutions, the deleterious/depassive effect of fluoride ions on the titanium oxide films was examined and evaluated with the parameter of the film breakdown time. It was also shown that the films anodically formed on titanium at higher potentials (>2.5 V) exhibited significantly higher stability against the fluoride attack than that either formed at lower potentials (<2.5 V) or formed natively in the air.     

Reversible covalent patterning of self-assembled monolayers on gold and silicon oxide surfaces

This paper describes the generation of reversible patterns of self-assembled monolayers (SAMs) on gold and silicon oxide surfaces via the formation of reversible covalent bonds. The reactions of (patterned) SAMs of 11-amino-1-undecanethiol (11-AUT) with propanal, pentanal, decanal, or terephthaldialdehyde result in dense imine monolayers. The regeneration of these imine monolayers to the 11-AUT monolayer is obtained by hydrolysis at pH 3. The (patterned) monolayers were characterized by Fourier transform infrared reflection absorption spectroscopy, X-ray photoelectron spectroscopy, contact angle and electrochemical measurements, and atomic force microscopy. Imines can also be formed by microcontact printing of amines on terephthaldialdehyde-terminated substrates. Lucifer Yellow ethylenediamine was employed as a fluorescent amine-containing marker to visualize the reversible covalent patterning on a terephthaldialdehyde-terminated glass surface by confocal microscopy. These experiments demonstrate that with reversible covalent chemistry it is possible to print and erase chemical patterns on surfaces repeatedly.     

Photoinduced desorption of sulfur from gold nanoparticles loaded on metal oxide surfaces

We now report photoinduced sulfur desorption from the surfaces of Au nanoparticles loaded on metal oxides. This reaction occurs in water at ordinary temperature and pressure. Nanometer-sized Au particles have been formed on the surfaces of various metal oxides by deposition-precipitation (Au/oxides). Elemental sulfur (S8) is selectively adsorbed on the Au nanoparticle surfaces of Au/oxides in an atomic state at a coverage of (theta) 1/3. Irradiation (lambdaex > 300 nm) of the sulfur adsorbed Au/anatase TiO2 in water has led to reductive desorption of the sulfurs at room temperature. Electrochemical measurements using Au/oxides indicate that the driving force for this reaction is the photoinduced upward shift of Fermi energy of the metal oxide-supported Au nanoprticles. This study will open up a novel and wide application of heterogeneous photocatalysis for thermal catalysts.     

The use of auger electron spectroscopy for the characterisation of the surfaces of spherical gold electrodes

Gold spheres (1.5 mm diameter) were obtained from wires of different purities by melting under various conditions (nature and pressure of the atmosphere used, sputtering and transfer conditions to the Auger spectroscope). Their surfaces were analysed by Auger electron spectroscopy (AES) as regards conditions of preparation. The main impurities detected were sulphur, carbon and oxygen, the latter appeared to be bonded to oxidizable elements such as silicon, calcium or even iron for the less pure samples. The origin of the surface contaminants has been investigated (bulk metal impurities, air pollutants, emission from the inner surface of pyrex tube used for melting, annealing and sputtering). Spheres of known surface condition were used as electrodes. The shape of differential capacity-potential curves obtained just after the electrode was dipped into the electrolyte was in good agreement with expectation based on previous AES analysis. Other gold electrodes were analysed by AES after various electrochemical treatments. Oxygen appeared to be stable under AES vacuum conditions on the surface of an electrochemically oxidized electrode. Such oxidized gold surfaces did not adsorb carbon compounds and sulphur unlike those which were reduced. Metallic impurities were not detected by AES on electrochemically reduced gold electrodes which did not retain oxygen from previous electro-oxidizing treatments. In this case oxygen traces observed by AES which amounted to random values according to the electrochemical treatment, seemed to be assignable to cumulative contribution of oxidized impurities not detected individually by AES.     

Partial dewetting of polyethylene thin films on rough silicon dioxide surfaces

The effect of roughness on the dewetting behavior of polyethylene thin films on silicon dioxide substrates is presented. Smooth and rough silicon dioxide substrates of 0.3 and 3.2-3.9 nm root-mean-square roughness were prepared by thermal oxidation of silicon wafers and plasma-enhanced chemical vapor deposition on silicon wafers, respectively. Polymer thin films of approximately 80 nm thickness were deposited by spin-coating on these substrates. Subsequent dewetting and crystallization of the polyethylene were observed by hot-stage optical microscopy in reflection mode. During heating, the polymer films melt and dewet on both substrates. Further observations after cooling indicate that, whereas complete dewetting occurs on the smooth substrate surface, partial dewetting occurs for the polymer film on the rough surface. The average thickness of the residual film on the rough surface was determined by ellipsometry to be a few nanometers, and the spatial distribution of the polymer in the cavities of the rough surface could be obtained by X-ray reflectometry. The residual film originates from the impregnation of the porous surface by the polymer fluid, leading to the observed partial dewetting behavior. This new type of partial dewetting should have important practical consequences, as most real surfaces exhibit significant roughness.     

Syntheses of hemoprotein models that can be covalently attached onto electrode surfaces by click chemistry

Five alkyne-containing hemoprotein models have been synthesized in a convergent manner. Sonogashira coupling was used to introduce the alkyne functional group on the proximal imidazole before or after being attached on the porphyrin. One model was immobilized onto a gold electrode surface via copper(I)-catalyzed azide-alkyne cycloaddition (Sharpless click chemistry).     

Direct visualization of dewetting of molecularly thin liquid films on solid surfaces

The effect of the surface energy gamma, disjoining pressure, Pi, and roughness on the dewetting of molecularly thin liquid lubricant films on magnetic disks, which have sub-nanometer surface topography, has been investigated by visualizing the dewetting process directly using ellipsometric microscopy. The dewetting process of thin liquids on the rough surface is determined not only by the well-known instability of films, which is determined by the sign of dPi/dh, but also by the sign of Pi and the surface topography of the substrate even if its roughness is of the sub-nanometer order. The dewetting film formed small droplets, which were not along the surface topography of the substrate, when Pi < 0. On the other hand, it formed grooves along the surface topography with a sub-nanometer roughness when Pi > 0. Moreover, the sub-nanometer roughness initiated the dewetting of the metastable liquid thin films.     

Effect of silica colloids on the rheology of viscoelastic gels formed by the surfactant cetyl trimethylammonium tosylate

The effects of the addition of submicrometer-sized colloidal silica spheres on the linear and nonlinear rheology of semidilute solutions of a viscoelastic gel are studied. For a 1.4 wt% solution of the surfactant CTAT, a peak in the zero-shear rate viscosity eta(0) is observed at approximately equal weight percents of silica and CTAT. This peak shifts to lower silica concentrations on increasing either the CTAT concentration or the surface charge on silica and disappears when the CTAT concentration is increased to 2.6 wt%. The increases in eta(0) and the high frequency plateau modulus G(0) on the introduction of SiO(2) are explained by considering the increasingly entangled wormlike micelles that are formed due to the enhanced screening of the electrostatic interactions. The observed decrease in the values of G(0) and eta(0) at higher concentrations of silica particles is explained in terms of the formation of surfactant bilayers due to the adsorption of the positively charged cetyl trimethylammonium to the negatively charged silica.     

Mediation of long-range attraction selectively between negatively charged colloids on surfaces by solvation

We propose a mean-field analytical model to account for the observed asymmetry in the ability to form long-range attraction by the negatively charged colloidal particles and not their equivalently charged positive counterpart. We conjecture that this asymmetry is due to solvation effects, and we phenomenologically capture its physics by considering the relative strength of this water-induced short-range repulsion between the different charge species. We then apply our model to the colloidal system of negatively charged disks that are neutralized by a sea of counterions and strongly absorbed to an interface in a compressible binary system. We demonstrate the resulting coexistence between a dilute isotropic ionic phase and a condensed hexagonal lattice phase as a function of density and interaction strength.     

Spectroscopic and electrochemical characterization of interfacial biomimetic assemblies on electrochemically generated gold oxide surfaces

We report on the formation of a gold oxide layer and the reaction of this oxide with an acid chloride to form a stable, relatively complete monolayer bound through an ester-like bond to the gold oxide surface. We have used cyclic voltammetry, FTIR and optical ellipsometry to characterize this novel monolayer structure. The exposed functional groups of this monolayer can participate in subsequent surface reactions, opening the door to the use of oxide-based surface attachment chemistry on metallic substrates. This chemistry will allow for the formation of films tailored to contain both hydrophobic and hydrophilic regions, stacked at predetermined distances from the substrate that may serve as biomembrane mimetic assemblies.