Site selectivity and reversibility in the reactions of titanium hydrazides with Si-H, Si-X, C-X and H+ reagents: Ti=N(α) 1,2-silane addition, Nβ alkylation, Nα protonation and σ-bond metathesis

We report a combined experimental and computational comparative study of the reactions of the homologous titanium dialkyl- and diphenylhydrazido and imido compounds Cp*Ti{MeC(N(i)Pr)(2)}(NNR(2)) (R = Me (1) or Ph (2)) and Cp*Ti{MeC(N(i)Pr)(2)}(NTol) (3) with silanes, halosilanes, alkyl halides and [Et(3)NH][BPh(4)]. Compound 1 underwent reversible Si-H 1,2-addition to Ti=N(α) with RSiH(3) (experimental ΔH ca. -17 kcal mol(-1)), and irreversible addition with PhSiH(2)X (X = Cl, Br). DFT found that the reaction products and certain intermediates were stabilised by β-NMe(2) coordination to titanium. The Ti-D bond in Cp*Ti{MeC(N(i)Pr)(2)}(D){N(NMe(2))SiD(2)Ph} underwent σ-bond metathesis with BuSiH(3) and H(2). Compound 1 reacted with RR'SiCl(2) at N(α) to transfer both Cl atoms to Ti; 2 underwent a similar reaction. Compound 3 did not react with RSiH(3) or alkyl halides but formed unstable Ti=N(α) 1,2-addition or N(α) protonation products with PhSiH(2)X or [Et(3)NH][BPh(4)]. Compound 1 underwent exclusive alkylation at N(β) with RCH(2)X (R = H, Me or Ph; X = Br or I) whereas protonation using [Et(3)NH][BPh(4)] occurred at N(α). DFT studies found that in all cases electrophile addition to N(α) (with or without NMe(2) chelation) was thermodynamically favoured compared to addition to N(β).     

Transfer of amido groups from isolated rhodium(I) amides to alkenes and vinylarenes

The reaction of monomeric and dimeric rhodium(I) amido complexes with unactivated olefins to generate imines is reported. Transamination of {(PEt(3))(2)RhN(SiMePh(2))(2)} (1a) or its -N(SiMe(3))(2) analogue 1b with p-toluidine gave the dimeric [(PEt(3))(2)Rh(mu-NHAr)](2) (Ar = p-tolyl) (2a) in 80% isolated yield. Reaction of 2a with PEt(3) generated the monomeric (PEt(3))(3)Rh(NHAr) (Ar = p-tolyl) (3a). PEt(3)-ligated arylamides 2a and 3a reacted with styrene to transfer the amido group to the olefin and to form the ketimine Ph(Me)C=N(p-tol) (4a) in 48-95% yields. The dinuclear amido hydride (PEt(3))(4)Rh(2)(mu-NHAr)(mu-H) (Ar = p-tolyl) (5a) was formed from reaction of 2a in 95% yield, and a mixture of this dimeric species and the (PEt(3))(n)RhH complexes with n = 3 and 4 was formed from reaction of 3a in a combined 75% yield. Propene reacted with 2a to give Me(2)C=N(p-tol) (4b) and 5a in 90 and 57% yields. Propene also reacted with 3a to give 4b and 5a in 65 and 94% yields. Analogues of 2a and 3a with varied electronic properties also reacted with styrene to form the corresponding imines, and moderately faster rates were observed for reactions of electron-rich arylamides. Kinetic studies of the reaction of 3a with styrene were most consistent with formation of the imine by migratory insertion of olefin into the rhodium-amide bond to generate an aminoalkyl intermediate that undergoes beta-hydrogen elimination to generate a rhodium hydride and an enamine that tautomerizes to the imine.     

6-Coordinate tungsten(VI) tris-n-isopropylanilide complexes: products of terminal oxo and nitrido transformations effected by main group electrophiles

The nitridotungsten(vi) complex NW(N[i-Pr]Ar)(3) (-N, Ar = 3,5-Me(2)C(6)H(3)) reacts with (CF(3)C(O))(2)O followed by ClSiMe(3) to give the isolable trifluoroacetylimido-chloride complex -(NC(O)CF(3))Cl, with oxalyl chloride to give cyanate-dichloride -(OCN)(Cl)(2), and with PCl(5) to give trichlorophosphinimide-dichloride -(NPCl(3))(Cl)(2). The oxo-chloride complex -(O)Cl, obtained from -N upon treatment with pivaloyl chloride, reacts with PCl(5) to give trichloride -(Cl)(3). Synthetic and structural details are reported for the new tungsten trisanilide derivatives.     

Sigma-borane complexes of iridium: synthesis and structural characterization

Reaction of NaBH4 with (tBuPOCOP)IrHCl affords the previously reported complex (tBuPOCOP)IrH2(BH3) (1) (tBuPOCOP = kappa(3)-C6H3-1,3-[OP(tBu)2]2). The structure of 1 determined from neutron diffraction data contains a B-H sigma-bond to iridium with an elongated B-H bond distance of 1.45(5) A. Compound 1 crystallizes in the space group P1 (Z = 2) with a = 8.262 (5) A, b = 12.264 (5) A, c = 13.394 (4) A, and V = 1256.2 (1) A(3) (30 K). Complex 1 can also be prepared by reaction of BH3 x THF with (tBuPOCOP)IrH2. Reaction of (tBuPOCOP)IrH2 with pinacol borane gave initially complex 2, which is assigned a structure analogous to that of 1 based on spectroscopic measurements. Complex 2 evolves H2 at room temperature leading to the borane complex 3, which is formed cleanly when 2 is subjected to dynamic vacuum. The structure of 3 has been determined by X-ray diffraction and consists of the (tBuPOCOP)Ir core with a sigma-bound pinacol borane ligand in an approximately square planar complex. Compound 3 crystallizes in the space group C2/c (Z = 4) with a = 41.2238 (2) A, b = 11.1233 (2) A, c = 14.6122 (3) A, and V = 6700.21 (19) A(3) (130 K). Reaction of (tBuPOCOP)IrH2 with 9-borobicyclononane (9-BBN) affords complex 4. Complex 4 displays (1)H NMR resonances analogous to 1 and exists in equilibrium with (tBuPOCOP)IrH2 in THF solutions.     

Ion-molecule reactions of gas-phase chromium oxyanions: CrxOyH z − + O2

Chromium oxyanions, Cr(x)O(y)H(z)(-), were generated in the gas-phase using a quadrupole ion trap secondary ion mass spectrometer (IT-SIMS), where they were reacted with O(2). Only CrO(2)(-) of the Cr(1)O(y)H(z)(-) envelope was observed to react with oxygen, producing primarily CrO(3)(-). The rate constant for the reaction of CrO(2)(-) with O(2) was approximately 38% of the Langevin collision constant at 310 K. CrO(3)(-), CrO(4)(-), and CrO(4)H(-) were unreactive with O(2) in the ion trap. In contrast, Cr(2)O(4)(-) was observed to react with O(2) producing CrO(3)(-) + CrO(3) via oxidative degradation at a rate that was approximately 15% efficient. The presence of background water facilitated the reaction of Cr(2)O(4)(-) + H(2)O to form Cr(2)O(5)H(2)(-); the hydrated product ion Cr(2)O(5)H(2)(-) reacted with O(2) to form Cr(2)O(6)(-) (with concurrent elimination of H(2)O) at a rate that was 6% efficient. Cr(2)O(5)(-) also reacted with O(2) to form Cr(2)O(7)(-) (4% efficient) and Cr(2)O(6)(-) + O (2% efficient); these reactions proceeded in parallel. By comparison, Cr(2)O(6)(-) was unreactive with O(2), and in fact, no further O(2) addition could be observed for any of the Cr(2)O(6)H(z)(-) anions. Generalizing, Cr(x)O(y)H(z)(-) species that have low coordinate, low oxidation state metal centers are susceptible to O(2) oxidation. However, when the metal coordination is >3, or when the formal oxidation state is > or =5, reactivity stops.     

Photochemical activation of ruthenium(II)-pyridylamine complexes having a pyridine-N-oxide pendant toward oxygenation of organic substrates

Ruthenium(II)-acetonitrile complexes having η(3)-tris(2-pyridylmethyl)amine (TPA) with an uncoordinated pyridine ring and diimine such as 2,2'-bipyridine (bpy) and 2,2'-bipyrimidine (bpm), [Ru(II)(η(3)-TPA)(diimine)(CH(3)CN)](2+), reacted with m-chloroperbenzoic acid to afford corresponding Ru(II)-acetonitrile complexes having an uncoordinated pyridine-N-oxide arm, [Ru(II)(η(3)-TPA-O)(diimine)(CH(3)CN)](2+), with retention of the coordination environment. Photoirradiation of the acetonitrile complexes having diimine and the η(3)-TPA with the uncoordinated pyridine-N-oxide arm afforded a mixture of [Ru(II)(TPA)(diimine)](2+), intermediate-spin (S = 1) Ru(IV)-oxo complex with uncoordinated pyridine arm, and intermediate-spin Ru(IV)-oxo complex with uncoordinated pyridine-N-oxide arm. A Ru(II) complex bearing an oxygen-bound pyridine-N-oxide as a ligand and bpm as a diimine ligand was also obtained, and its crystal structure was determined by X-ray crystallography. Femtosecond laser flash photolysis of the isolated O-coordinated Ru(II)-pyridine-N-oxide complex has been investigated to reveal the photodynamics. The Ru(IV)-oxo complex with an uncoordinated pyridine moiety was alternatively prepared by reaction of the corresponding acetonitrile complex with 2,6-dichloropyridine-N-oxide (Cl(2)py-O) to identify the Ru(IV)-oxo species. The formation of Ru(IV)-oxo complexes was concluded to proceed via intermolecular oxygen atom transfer from the uncoordinated pyridine-N-oxide to a Ru(II) center on the basis of the results of the reaction with Cl(2)py-O and the concentration dependence of the consumption of the starting Ru(II) complexes having the uncoordinated pyridine-N-oxide moiety. Oxygenation reactions of organic substrates by [Ru(II)(η(3)-TPA-O)(diimine)(CH(3)CN)](2+) were examined under irradiation (at 420 ± 5 nm) and showed selective allylic oxygenation of cyclohexene to give cyclohexen-1-ol and cyclohexen-1-one and cumene oxygenation to afford cumyl alcohol and acetophenone.     

Formation and reactivity of a porphyrin iridium hydride in water: acid dissociation constants and equilibrium thermodynamics relevant to Ir-H, Ir-OH, and Ir-CH2- bond dissociation energetics

Aqueous solutions of group nine metal(III) (M = Co, Rh, Ir) complexes of tetra(3,5-disulfonatomesityl)porphyrin [(TMPS)M(III)] form an equilibrium distribution of aquo and hydroxo complexes ([(TMPS)M(III)(D(2)O)(2-n)(OD)(n)]((7+n)-)). Evaluation of acid dissociation constants for coordinated water show that the extent of proton dissociation from water increases regularly on moving down the group from cobalt to iridium, which is consistent with the expected order of increasing metal-ligand bond strengths. Aqueous (D(2)O) solutions of [(TMPS)Ir(III)(D(2)O)(2)](7-) react with dihydrogen to form an iridium hydride complex ([(TMPS)Ir-D(D(2)O)](8-)) with an acid dissociation constant of 1.8(0.5) × 10(-12) (298 K), which is much smaller than the Rh-D derivative (4.3 (0.4) × 10(-8)), reflecting a stronger Ir-D bond. The iridium hydride complex adds with ethene and acetaldehyde to form organometallic derivatives [(TMPS)Ir-CH(2)CH(2)D(D(2)O)](8-) and [(TMPS)Ir-CH(OD)CH(3)(D(2)O)](8-). Only a six-coordinate carbonyl complex [(TMPS)Ir-D(CO)](8-) is observed for reaction of the Ir-D with CO (P(CO) = 0.2-2.0 atm), which contrasts with the (TMPS)Rh-D analog which reacts with CO to produce an equilibrium with a rhodium formyl complex ([(TMPS)Rh-CDO(D(2)O)](8-)). Reactivity studies and equilibrium thermodynamic measurements were used to discuss the relative M-X bond energetics (M = Rh, Ir; X = H, OH, and CH(2)-) and the thermodynamically favorable oxidative addition of water with the (TMPS)Ir(II) derivatives.     

2-取代的6-溴甲基-4(3H)-喹唑啉酮的合成

2-取代的6-溴甲基-4(3H)-喹唑啉酮的合成;4(3H)-喹唑啉酮;苯并噁嗪酮;N-溴代琥珀酰亚胺; 合成     

Some Cyclization Reactions with 1,3-Diphenyl-5-Imino-2-Imidazolidinone-4-Thione

1,3-Diphenyl-5-imino-2-imidazolidinone-4-thione (II) was treated with diazomethanes to give (III-V). Interaction of (II) with amino compounds furnished the corresponding 4-substituted imino derivatives (VIa-m). Imidazoquinoxaline derivatives (VIIIb, c) were obtained through interaction of (II) with o-phenylenediamines. Condensation of (II) with hydrazines afforded the hydrazones (IX, Xa, b). Semicarbazone and thiosemicarbazone derivatives (XIIa-d) were prepared from the reaction of (IX) with isocyanates and isothiocyanates. Again (II) was allowed to react with n-butylmagnesium bromide and HgCl₂ to give (XIII) and (XIV) respectively.     

Oxygen isotope analysis of carbonates in the calcite-dolomite-magnesite solid-solution by high-temperature pyrolysis: initial results

Accurate and efficient measurement of the oxygen isotope composition of carbonates (delta(C) (18)O) based on the mass spectrometric analysis of CO(2) produced by reacting carbonate samples with H(3)PO(4) is compromised by: (1) uncertainties associated with fractionation factors (alpha(CO)(2)C) used to correct measured oxygen isotope values of CO(2)(delta(CO(2)(18)O) to delta(C) (18)O; and (2) the slow reaction rates of many carbonates of geological and environmental interest with H(3)PO(4). In contrast, determination of delta(C) (18)O from analysis of CO produced by high-temperature (>1400 degrees C) pyrolytic reduction, using an elemental analyser coupled to continuous-flow isotope-ratio mass spectrometry (TC/EA CF-IRMS), offers a potentially efficient alternative that measures the isotopic composition of total carbonate oxygen and should, therefore, theoretically be free of fractionation effects. The utility of the TC/EA CF-IRMS technique was tested by analysis of carbonates in the calcite-dolomite-magnesite solid-solution and comparing the results with delta(C) (18)O measured by conventional thermal decomposition/fluorination (TDF) on the same materials. Initial results show that CO yields are dependent on both the chemical composition of the carbonate and the specific pyrolysis conditions. Low gas yields (<100% of predicted yield) are associated with positive (>+0.2 per thousand) deviations in delta(C(TC/EA) (18)O compared with delta(C(TDF) (18)O. At a pyrolysis temperature of 1420 degrees C the difference between delta(C) (18)O measured by TC/EA CF-IRMS and TDF (Delta(C(TC/EA,TDF) (18)O) was found to be negatively correlated with gas yield (r = -0.785) and this suggests that delta(C) (18)O values (with an estimated combined standard uncertainty of +/-0.38 per thousand) could be derived by applying a yield-dependent correction. Increasing the pyrolysis temperature to 1500 degrees C also resulted in a statistically significant correlation with gas yield (r = -0.601), indicating that delta(C) (18)O values (with an estimated uncertainty of +/-0.43 per thousand) could again be corrected using a yield-dependent procedure. Despite significant uncertainty associated with TC/EA CF-IRMS analysis, the magnitude of the uncertainty is similar to that associated with the application of poorly defined values of alpha(CO)(2), (C) used to derive delta(C) (18)O from delta(CO(2) (18)O measured by the H(3)PO(4) method for most common carbonate phases. Consequently, TC/EA CF-IRMS could provide a rapid alternative for the analysis of these phases without any effective deterioration in relative accuracy, while analytical precision could be improved by increasing the number of replicate analyses for both calibration standards and samples. Although automated gas preparation techniques based on the H(3)PO(4) method (ISOCARB, Kiel device, Gas-Bench systems) have the potential to measure delta(CO)(2) (18)O efficiently for specific, slowly reacting phases (e.g. dolomite), problems associated with poorly defined alpha(CO)(2), (C) remain. The application of the Principle of Identical Treatment is not a solution to the analysis of these phases because it assumes that a single fractionation factor may be defined for each phase within a solid-solution regardless of its precise chemical composition. This assumption has yet to be tested adequately.     

FTIR spectroscopic study of titanium-containing mesoporous silicate materials

The surface acidity of different mesoporous titanium-silicates, such as well-organized hexagonally packed Ti-MMM, Ti-MMM-2, Ti-SBA-15, and amorphous TiO(2)-SiO(2) mixed oxides (aerogels and xerogels), was studied by means of FTIR spectroscopy of CO adsorbed at 80 K and CD(3)CN adsorbed at 293 K. The surface hydroxyl groups of mesoporous titanium-silicates with 2-7 wt % Ti revealed a Br?nsted acidity slightly higher to that of pure silicate. TiO(2)-SiO(2) xerogels revealed the highest Br?nsted acidity among the titanium-silicates studied. CO adsorption revealed two additional sites on the surface in comparison to pure silicate, characterized by nu(CO) from 2185 (high pressure) to 2178 (low pressure) cm(-1) and from 2174 (high pressure) to 2170 (low pressure) cm(-1). These bands are due to CO adsorbed on isolated titanium cations in the silica surrounding or having one Ti(4+) cation in their second coordination sphere and due to CO interactions with Ti-OH groups, respectively. CD(3)CN adsorption similarly revealed the existence of two additional sites, which were not detected for pure silicate: at 2289 cm(-1) due to CD(3)CN interaction with titanol groups and from 2306 (low pressure) to 2300 (high pressure) cm(-1) due to acetonitrile interaction with isolated framework titanium cations with probably one Ti(4+) cation in their second coordination shell. The spectroscopic results are compared with computational data obtained on cluster models of titanium-silicate with different titanium content. According to the IR data, the Ti accessibility on the surfaces for mesoporous titanium-silicates with similar Ti loading (2 wt %) was found to fall in the order TiO(2)-SiO(2) aerogel approximately TiO(2)-SiO(2) xerogel > Ti-MMM approximately Ti-MMM-2 > Ti-SBA-15. This order (except TiO(2)-SiO(2) xerogel) correlates with the catalytic activity found previously for titanium-silicates in 2,3,6-trimethylphenol oxidation with H(2)O(2).     

Chelate bis(imino)pyridine cobalt complexes: synthesis, reduction, and evidence for the generation of ethene polymerization catalysts by Li+ cation activation

Treatment of the bis(iminobenzyl)pyridine chelate Schiff-base ligand 8 (ligPh) with FeCl2 or CoCl2 yielded the corresponding (ligPh)MCl2 complexes 9 (Fe) and 10 (Co). The reaction of 10 with methyllithium or "butadiene-magnesium" resulted in reduction to give the corresponding (ligPh)Co(I)Cl product 11. Similarly, the bis(aryliminoethyl)pyridine ligand (ligMe) was reacted with CoCl2 to yield (ligMe)CoCl2 (12). Reduction to (ligMe)CoCl (13) was effected by treatment with "butadiene-magnesium". Complex 13 reacted with Li[B(C6F5)4] in toluene followed by treatment with pyridine to yield [(ligMe)Co+-pyridine] (15). The reaction of the Co(II) complexes 10 or 12 with ca. 3 molar equiv of methyllithium gave the cobalt(I) complexes 16 and 17, respectively. Treatment of the (ligMe)CoCH3 (17) with Li[B(C6F5)4] gave a low activity ethene polymerization catalyst. Likewise, complex 16 produced polyethylene (activity = 33 g(PE) mmol(cat)(-1) h(-1) bar(-1) at room temperature) upon treatment with a stoichiometric amount of Li[B(C6F5)4]. A third ligand (lig(OMe)) was synthesized featuring methoxy groups in the ligand backbone (22). Coordination to FeCl2 and CoCl2 yielded the desired compounds 23 and 24. Reaction with MeLi gave (ligOMe)CoMe (25/26). Treatment of 25/26 with excess B(C6F5)3 gave the eta6-arene cation complex 27, where one Co-N linkage was cleaved. Activation of 25/26 with Li[B(C6F5)4] again gave a catalytically active species.     

Synthesis,structure, and reactions of a three-coordinate nickel-carbene complex, [1,2-Bis(di-tert-butylphosphino)ethane]Ni=CPh(2)

The three-coordinate nickel-carbene complex (dtbpe)Ni=CPh2 (3) was prepared from the thermolysis of the diphenyldiazoalkane complex (dtbpe)Ni(N,N':eta2-N2CPh2) (2) (dtbpe = 1,2-bis(di-tert-butylphosphino)ethane). Complex 3 was structurally characterized by single-crystal X-ray diffraction methods (Ni-C = 1.836(2) A). Complex 3 reacts with 2 equiv of CO2 to afford (dtbpe)Ni{OC(O)CPh2C(O)O} (4), with diphenylketene to give (dtbpe)Ni{OC(=CPh2)CPh2} (5), with excess CO to transfer the carbene fragment and generate diphenylketene and (dtbpe)Ni(CO)2 (6), with sulfur dioxide to give the metallasulfone (dtbpe)Ni{C,S:eta2-S(O)2CPh2} (7), and with the Br?nsted acid [HNMe2Ph][B(C6F5)4] to give the alkyl cation [(dtbpe)Ni(CHPh2)][B(C6F5)4] (8). Complexes 4, 5, and 7 have also been characterized by single-crystal X-ray diffraction methods.     

1-[Hydroxy(sulfonyloxy)iodo]-1H,1H-perfluoroalkanes: Stable, Fluoroalkyl Analogs of Koser's Reagent

1-[Hydroxy(sulfonyloxy)iodo]-1H,1H-perfluoroalkanes 3 [R(f)CH(2)I(OH)OSO(2)R; R = CH(3), CF(3), p-CH(3)C(6)H(4), R(f) = CF(3), C(2)F(5)] can be prepared in two steps from the appropriate iodofluoroalkanes by oxidation with peroxytrifluoroacetic acid and subsequent reaction with TsOH, MsOH, or Me(3)SiOTf. The tosylate derivative 3a reacts with silyl enol ethers under mild conditions to give the respective alpha-(tosyloxy) ketones. A similar reaction of cyclohexene furnishes cis-1,2-bis(tosyloxy)cyclohexane as the major product. Triflates 3c,f react with (trimethylsilyl)arenes under mild conditions to afford the respective (fluoroalkyl) (aryl)iodonium triflates 7, while the analogous reaction with alkynyltrimethylsilanes leads to novel (fluoroalkyl)(alkynyl)iodonium salts 8.     

Ethylene sensing by silver(I) salt-impregnated luminescent films

Luminescent oligomers and polymers doped with silver(I) salts were used as optical sensors for ethylene and other gaseous small molecules. Films of poly(vinylphenylketone) (PVPK) or 1,4-bis(methylstyryl)benzene (BMSB) impregnated with AgBF(4), AgSbF(6), or AgB(C(6)F(5))(4) respond to ethylene exposures with a reversible emission quenching that is proportional to the pressure of the gas. Experiments with various analytes revealed that only gases capable of forming coordinate bonds with Ag(I) ions (i.e., ethylene, propylene, and ammonia) produced a sensing response. Comparison of the effects of ethylene and tetradeuterioethylene revealed that the emission quenching was due to enhanced vibrational relaxation. The Ag(I) ions are essential to the observed optical response. The oligomer/polymer support enhances the response characteristics of the impregnated salt by promoting separation of Ag(I) from its anion, a separation that improves accessibility of the Ag(I) ion to the gaseous analytes. Salts with large lattice energies, where the anion is not dissociated from Ag(I) in the matrix, fail to sensitize film responses. Photoluminescence experiments with Ag(I)-impregnated BMSB films established that the Ag(I) ions serve to communicate the analyte-binding signal to the support by altering the support-based emission. These experiments demonstrate a sensing paradigm where simultaneous coordination of Ag(I) ions to the support matrix and to a gaseous analyte enables the optical response.     

Chiral 2,6-bis(oxazolinyl)pyridine-rare earth metal complexes as catalysts for highly enantioselective 1,3-dipolar cycloaddition reactions of 2-benzopyrylium-4-olates

Significant levels of enantioselectivity were obtained in 1,3-dipolar cycloadditions of 2-benzopyrylium-4-olate generated from the Rh(2)(OAc)(4)-catalyzed decomposition of o-methoxycarbonyl-alpha-diazoacetophenone. This reaction utilized chiral 2,6-bis(oxazolinyl)pyridine (Pybox)--rare earth metal triflate complexes as chiral Lewis acid catalysts. The reactions with several benzyloxyacetaldehyde derivatives catalyzed by a Sc(III)--Pybox-i-Pr complex (10 mol %) proceeded smoothly to yield endo-adducts selectively with high enantioselectivity (up to 93% ee). For the reaction with benzyl pyruvate, the Sc(III)-Pybox-i-Pr complex (10 mol %) catalyzed the reaction effectively in the presence of trifluoroacetic acid (10 mol %) to yield an exo-adduct with both high diastereo- and enantioselectivity (94% ee). This catalytic system was efficiently applied to the reactions with several other alpha-keto esters with high exo- and enantioselectivities (up to 95% ee). In contrast to the reaction with carbonyl compounds, Yb(III)--Pybox-Ph complex (10 mol %) was found to be effective to obtain high enantioselectivity (96% ee) of diastereoselectively produced exo-cycloadduct in the reaction with 3-acryloyl-2-oxazolidinone.     

Preparation of I2@SWNTs: synthesis and spectroscopic characterization of I2-loaded SWNTs

X-ray photoelectron spectroscopy (XPS) along with inductively coupled plasma analysis (ICP-AE) and Raman spectroscopy have been used to define the location and to quantify the amount of iodine in HiPco SWNT samples loaded with molecular I(2) via sublimation (I(2)-SWNTs). The exterior-adsorbed I(2) can be removed (as I(-)) by reducing the sample of filled nanotubes with Na(0)/THF or by heating the I(2)-SWNTs to 300 degrees C (without reduction), leaving I(2) contained only within the interior of the SWNTs (I(2)@SWNTs) as proven by XPS. These I(2)@SWNTs contain approximately 25 wt % of I(2) and are stable without the loss of I(2) even after exposure to additional reduction with Na(0)/THF or upon heating to ca. 500 degrees C.     

New insight into selective catalytic reduction of nitrogen oxides by ammonia over H-form zeolites: a theoretical study

Density functional theory calculations were carried out to investigate the reaction mechanism of selective catalytic reduction of nitrogen oxides by ammonia in the presence of oxygen at the Br?nsted acid sites of H-form zeolites. The Br?nsted acid site of H-form zeolites was modeled by an aluminosilicate cluster containing five tetrahedral (Al, Si) atoms. A low-activation-energy pathway for the catalytic reduction of NO was proposed. It consists of two successive stages: first NH(2)NO is formed in gas phase, and then is decomposed into N(2) and H(2)O over H-form zeolites. In the first stage, the formation of NH(2)NO may occur via two routes: (1) NO is directly oxidized by O(2) to NO(2), and then NO(2) combines with NO to form N(2)O(3), which reacts with NH(3) to produce NH(2)NO; (2) when NO(2) exceeds NO in the content, NO(2) associates with itself to form N(2)O(4), and then N(2)O(4) reacts with NH(3) to produce NH(2)NO. The second stage was suggested to proceed with low activation energy via a series of synergic proton transfer steps catalyzed by H-form zeolites. The rate-determining step for the whole reduction of NO(x) is identified as the oxidation of NO to NO(2) with an activation barrier of 15.6 kcal mol(-1). This mechanism was found to account for many known experimental facts related to selective catalytic reduction of nitrogen oxides by ammonia over H-form zeolites.     

Structures, energies, and spin-spin coupling constants of methyl-substituted 1,3-diborata-2,4-diphosphoniocyclobutanes: four-member B-P-B-P rings B2P2(CH3)(n)H(8-n), with n = 0, 1, 2, 4

An ab initio study has been carried out to determine the structures, relative stabilities, and spin-spin coupling constants of a set of 17 methyl-substituted 1,3-diborata-2,4-diphosphoniocyclobutanes B(2)P(2)(CH(3))(n)H(8-n), for n = 0, 1, 2, 4, with four-member B-P-B-P rings. The B-P-B-P rings are puckered in a butterfly conformation, in agreement with experimental data for related molecules. Isomers with the CH(3) group bonded to P are more stable than those with CH(3) bonded to B. If there is only one methyl group or if two methyl groups are bonded to two different P or B atoms, isomers with equatorial bonds are more stable than those with axial bonds. However, when two methyl groups are present, the gem isomers are the most stable for molecules B(2)P(2)(CH(3))(2)H(6) with P-C and B-C bonds, respectively. Transition structures present barriers to the interconversion of two equilibrium structures or to the interchange of axial and equatorial positions in the same isomer. These barriers are very low for the isomer with two methyl groups bonded to B in axial positions for the isomer with four axial bonds and for the isomer with geminal B-C bonds at both B atoms. Coupling constants (1)J(B-P), (1)J(P-C), (1)J(B-C), (2)J(P-P), and (3)J(P-C) are capable of providing structural information. They are sensitive to the number of methyl groups present and can discriminate between axial, equatorial, and geminal bonds, although not all do this to the same extent. The one-bond coupling constants (1)J(B-P), (1)J(P-C), and (1)J(B-C) are similar in equilibrium and transition structures, but (3)J(P-C) and (2)J(P-P) are not. These coupling constants and those of the corresponding fluoro-derivatives of the 1,3-diborata-2,4-diphosphoniocyclobutanes demonstrate the great sensitivity of phosphorus coupling to structural and electronic effects.     

The first acetimino complexes of Rh(III). 4-imino-2-methylpentan-2-amino-Rh(III) complexes through metal-assisted intramolecular aldol-type condensation of two acetimino ligands

[Rh(Cp)Cl(mu-Cl)](2) (Cp = pentamethylcyclopentadienyl) reacts (i) with [Au(NH=CMe(2))(PPh(3))]ClO(4) (1:2) to give [Rh(Cp)(mu-Cl)(NH=CMe(2))](2)(ClO(4))(2) (1), which in turn reacts with PPh(3) (1:2) to give [Rh(Cp)Cl(NH=CMe(2))(PPh(3))]ClO(4) (2), and (ii) with [Ag(NH=CMe(2))(2)]ClO(4) (1:2 or 1:4) to give [Rh(Cp)Cl(NH=CMe(2))(2)]ClO(4) (3) or [Rh(Cp)(NH=CMe(2))(3)](ClO(4))(2).H(2)O (4.H(2)O), respectively. Complex 3 reacts (i) with XyNC (1:1, Xy = 2,6-dimethylphenyl) to give [Rh(Cp)Cl(NH=CMe(2))(CNXy)]ClO(4) (5), (ii) with Tl(acac) (1:1, acacH = acetylacetone) or with [Au(acac)(PPh(3))] (1:1) to give [Rh(Cp)(acac)(NH=CMe(2))]ClO(4) (6), (iii) with [Ag(NH=CMe(2))(2)]ClO(4) (1:1) to give 4, and (iv) with (PPN)Cl (1:1, PPN = Ph(3)P=N=PPh(3)) to give [Rh(Cp)Cl(imam)]Cl (7.Cl), which contains the imam ligand (N,N-NH=C(Me)CH(2)C(Me)(2)NH(2) = 4-imino-2-methylpentan-2-amino) that results from the intramolecular aldol-type condensation of the two acetimino ligands. The homologous perchlorate salt (7.ClO(4)) can be prepared from 7.Cl and AgClO(4) (1:1), by treating 3 with a catalytic amount of Ph(2)C=NH, in an atmosphere of CO, or by reacting 4with (PPN)Cl (1:1). The reactions of 7.ClO(4) with AgClO(4) and PTo(3) (1:1:1, To = C(6)H(4)Me-4) or XyNC (1:1:1) give [Rh(Cp)(imam)(PTo(3))](ClO(4))(2).H(2)O (8) or [Rh(Cp)(imam)(CNXy)](ClO(4))(2) (9), respectively. The crystal structures of 3 and 7.Cl have been determined.