In-situ cation exchange enhances room temperature phosphorescence of a family of metal-organic frameworks

The rational designability and chemical tunability of metal-organic frameworks(MOFs)are enabling tributes to efficaciously enhance their room temperature phosphorescence(RTP)performance.A family of stable anionic MOFs,[Zn₂(4,5-ImDC)₂]M₂(NKU-132,M=(CH₃)₂NH₂or(CH₂CH₃)₂NH₂),featuring significant RTP have been synthesized.By rational cation selection and in-situ replacement from dimethylammonium to diethylammonium,the phosphorescence lifetime is increased from 30.88 to126.3 ms,along with less sensitivity to air.This work provides an anti-quenching and lifetime tuning example for RTP-MOFmaterials via facile host-guest chemistry.     

A guest-dependent approach to retain permanent pores in flexible metal-organic frameworks by cation exchange

Two anionic metal-organic frameworks were successfully prepared based on pre-designed flexible multicarboxylate ligands and indium cations. Owing to the flexibility of the bridging organic linkers, which could not themselves sustain the frameworks, both of the frameworks showed thermal instability and shrinkage after removal of guest solvent molecules. Inspired by bamboo, we used a guest-dependent approach to tune the permanent porosity of the MOFs. In this approach, several tetraalkyammonium cations of different sizes were introduced into the channels by cation exchange to act as partitions and to support the main frameworks. This approach significantly enhanced the stability of the framework and its permanent porosity. Moreover, the gas-adsorption properties (such as gate sorption, hysteresis, and selectivity) of the MOFs were also modulated by the judicious choice of guest cations.     

Enhanced isosteric heat of H2 adsorption by inclusion of crown ethers in a porous metal-organic framework

Inclusion of 18-crown-6 or 15-crown-5 in a porous MOF increased the isosteric heats of H(2) adsorption significantly, which are comparable to MOFs containing open metal sites.     

Ligand-assisted enhancement of CO2 capture in metal-organic frameworks

Using density functional theory with a van der Waals-corrected functional, we elucidate how CO(2) binds to a novel "BTT-type" metal-organic framework (MOF) featuring open metal centers. We show that CO(2) binds most favorably to open metal cation sites, but with an adsorption energy that can be three times more sensitive to the choice of the bridging ligand than to metal cation choice. A strong, three-site interaction between CO(2) and the open-metal site is predicted, with the binding energy enhanced by up to a factor of 2, depending on the ligand. The CO(2)-MOF binding can be attributed to a combination of electrostatics and vdW dispersive interactions, both of which are critically sensitive to the local environment, and both of which contribute nearly equally to the overall binding strength. We show that a judicious choice of the organic linker and the metal center allows the binding energy to be tuned from 34.8 kJ/mol (for CaBTTri) to a maximum of 64.5 kJ/mol (MgBTT).     

Hierarchical modeling of ammonia adsorption in functionalized metal-organic frameworks

The adsorption of ammonia in four metal-organic frameworks modified with different functional groups (-OH, -C=O, -Cl, -COOH) was investigated using a hierarchical molecular modeling approach. To describe the hydrogen bonding and other strong interactions between NH(3) and the surface functional groups, a set of Morse potential parameters were obtained by fitting to energies from quantum chemical calculations at the MP2 level of theory. We describe a systematic force field parameterization process, in which the Morse parameters were fitted using simulated annealing to match a large number of single-point MP2 energies at various distances and angles. The fitted potentials were then used in grand canonical Monte Carlo simulations to predict ammonia adsorption isotherms and heats of adsorption in functionalized MIL-47, IRMOF-1, IRMOF-10, and IRMOF-16. The results show that ammonia adsorption can be significantly enhanced by using materials with appropriate pore size, strongly interacting functional groups, and high density of functional groups.     

Modeling adsorption in metal-organic frameworks with open metal sites: propane/propylene separations

We present a new approach for modeling adsorption in metal-organic frameworks (MOFs) with unsaturated metal centers and apply it to the challenging propane/propylene separation in copper(II) benzene-1,3,5-tricarboxylate (CuBTC). We obtain information about the specific interactions between olefins and the open metal sites of the MOF using quantum mechanical density functional theory. A proper consideration of all the relevant contributions to the adsorption energy enables us to extract the component that is due to specific attractive interactions between the π-orbitals of the alkene and the coordinatively unsaturated metal. This component is fitted using a combination of a Morse potential and a power law function and is then included into classical grand canonical Monte Carlo simulations of adsorption. Using this modified potential model, together with a standard Lennard-Jones model, we are able to predict the adsorption of not only propane (where no specific interactions are present), but also of propylene (where specific interactions are dominant). Binary adsorption isotherms for this mixture are in reasonable agreement with ideal adsorbed solution theory predictions. We compare our approach with previous attempts to predict adsorption in MOFs with open metal sites and suggest possible future routes for improving our model.     

Understanding hydrogen adsorption in metal-organic frameworks with open metal sites: a computational study

Recent experimental investigations show that the open metal sites may have a favorable impact on the hydrogen adsorption capacity of metal-organic frameworks (MOFs); however, no definite evidence has been obtained to date and little is known on the interactions between hydrogen and the pore walls of this kind of MOFs. In this work, a combined grand canonical Monte Carlo simulation and density functional theory calculation is performed on the adsorption of hydrogen in MOF-505, a recently synthesized MOF with open metal sites, to provide insight into molecular-level details of the underlying mechanisms. This work shows that metal-oxygen clusters are preferential adsorption sites for hydrogen, and the strongest adsorption of hydrogen is found in the directions of coordinatively unsaturated open metal sites, providing evidence that the open metal sites have a favorable impact on the hydrogen sorption capacity of MOFs. The storage capacity of hydrogen of MOF-505 at room temperature and moderate pressures is predicted to be low, in agreement with the outcome for hydrogen physisorption in other porous materials.     

Molecular simulation of adsorption and diffusion of hydrogen in metal-organic frameworks

Metal-organic frameworks (MOFs) are thought to be a set of promising hydrogen storage materials; however, little is known about the interactions between hydrogen molecules and pore walls as well as the diffusivities of hydrogen in MOFs. In this work, we performed a systematic molecular simulation study on the adsorption and diffusion of hydrogen in MOFs to provide insight into molecular-level details of the underlying mechanisms. This work shows that metal-oxygen clusters are preferential adsorption sites for hydrogen in MOFs, and the effect of the organic linkers becomes evident with increasing pressure. The hydrogen storage capacity of MOFs is similar to carbon nanotubes, which is higher than zeolites. Diffusion of hydrogen in MOFs is an activated process that is similar to diffusion in zeolites. The information derived in this work is useful to guide the future rational design and synthesis of tailored MOF materials with improved hydrogen adsorption capability.     

Confinement effects in the hydrogen adsorption on paddle wheel containing metal-organic frameworks

The confinement effects upon hydrogen adsorption in Cu(II)-paddle wheel containing metal-organic frameworks (MOFs) were evaluated and rationalized in terms of the structural properties (cavity types and pore diameters) of PCN-12, HKUST-1, MOF-505, NOTT-103 and NOTT-112. First-principles calculations were employed to identify the strongest adsorption positions at the paddle wheel inorganic building unit (IBU). The adsorption centres due to confinement were located through analysis of 3D occupancy maps obtained from the hydrogen trajectories computed via molecular dynamics simulations. It was found that the confinement enhances the adsorption on the weakest adsorption centres around the IBU in regions close to the narrowest windows and promotes the formation of new adsorption regions into the small cavities. Our results indicate that at low pressure, the high H(2) uptake in these materials is partly due to the presence of small cavities (5.3-8.5 ?) or narrow windows where the long-range contribution to the adsorption becomes important. Conversely, confinement effects in cavities with diameters >12 ? were not observed.     

Recent advances in metal-organic frameworks for adsorption of common aromatic pollutants

This review (with 85 refs.) summarizes the recent literature on the adsorption of common aromatic pollutants by using modified metal-organic frameworks (MOFs). Four kinds of aromatic pollutants are discussed, namely benzene homologues, polycyclic aromatic hydrocarbons (PAHs), organic dyes and their intermediates, and pharmaceuticals and personal care products (PPCPs). MOFs are shown to be excellent adsorbents that can be employed to both the elimination of pollutants and to their extraction and quantitation. Adsorption mechanisms and interactions between aromatic pollutants and MOFs are discussed. Finally, the actual challenges of existence and the perspective routes towards future improvements in the field are addressed.

Open image in new window

Graphical abstract Recent advance on adsorption of common aromatic pollutants including benzene series, polycyclic aromatic hydrocarbons, organic dyes and their intermediates, pharmaceuticals and personal care products by metal-organic frameworks.

     

Effects of surface area, free volume, and heat of adsorption on hydrogen uptake in metal-organic frameworks

Grand canonical Monte Carlo simulations were performed to predict adsorption isotherms for hydrogen in a series of 10 isoreticular metal-organic frameworks (IRMOFs). The results show acceptable agreement with the limited experimental results from the literature. The effects of surface area, free volume, and heat of adsorption on hydrogen uptake were investigated by performing simulations over a wide range of pressures on this set of materials, which all have the same framework topology and surface chemistry but varying pore sizes. The results reveal the existence of three adsorption regimes: at low pressure (loading), hydrogen uptake correlates with the heat of adsorption; at intermediate pressure, uptake correlates with the surface area; and at the highest pressures, uptake correlates with the free volume. The accessible surface area and free volume, calculated from the crystal structures, were also used to estimate the potential of these materials to meet gravimetric and volumetric targets for hydrogen storage in IRMOFs.     

Separation of styrene and ethylbenzene on metal-organic frameworks: analogous structures with different adsorption mechanisms

The metal-organic frameworks MIL-47 (V(IV)O{O(2)C-C(6)H(4)-CO(2)}) and MIL-53(Al) (Al(III)(OH)·{O(2)C-C(6)H(4)-CO(2)}) are capable of separating ethylbenzene and styrene. Both materials adsorb up to 20-24 wt % of both compounds. Despite the fact that they have identical building schemes, the reason for preferential adsorption of styrene compared to ethylbenzene is very different for the two frameworks. For MIL-47, diffraction experiments reveal that styrene is packed inside the pores in a unique, pairwise fashion, resulting in separation factors as high as 4 in favor of styrene. These separation factors are independent of the total amount of adsorbate offered. This is due to co-adsorption of ethylbenzene in the space left available between the packed styrene pairs. The separation is of a non-enthalpic nature. On MIL-53, the origin of the preferential adsorption of styrene is related to differences in enthalpy of adsorption, which are based on different degrees of framework relaxation. The proposed adsorption mechanisms are in line with the influence of temperature on the separation factors derived from pulse chromatography: separation factors are independent of temperature for MIL-47 but vary with temperature for MIL-53. Finally, MIL-53 is also capable of removing typical impurities like o-xylene or toluene from styrene-ethylbenzene mixtures.     

Quasi-equilibrated temperature programmed desorption and adsorption: A new method for determination of the isosteric adsorption heat

Temperature programmed desorption and adsorption (TPDA) studied under quasi-equilibrium conditions using typical flow TPD setup equipped with a chromatographic TCD detector has been found a good method of obtaining the equilibrium data characterizing adsorption of n-hexane on high silica HZSM-5 and HY zeolites. The equilibrium control of sorption has been confirmed by linearity of the isosters constructed from the TPDA profiles. For HZSM-5 it was corroborated by very good agreement obtained in fitting the experimental data with the model based on the dual site Langmuir (DSL) adsorption function. The values of the adsorption enthalpy and entropy, either determined from the adsorption isosters or as the fitted model parameters, were close to the literature data. Increase of the isosteric adsorption heat of hexane with coverage was observed for both zeolites (72-90 kJ mol⁻¹ for HZSM-5 and 46-61 kJ mol⁻¹ for HY).     

Understanding adsorption and interactions of alkane isomer mixtures in isoreticular metal-organic frameworks

Novel metal-organic frameworks (MOFs) may lead to advances in adsorption and catalysis owing to their superior properties compared to traditional nanoporous materials. A combination of the grand canonical Monte Carlo method and configurational-bias Monte Carlo simulation was used to evaluate the adsorption isotherms of C4-C6 alkane isomer mixtures in IRMOF-1 and IRMOF-6. The amounts of adsorbed linear and branched alkanes increase with increasing pressure, and the amount of branched alkanes is larger than that of the linear ones. The locations of the alkane isomer reveal that the Zn4O clusters of the IRMOFs are the preferential adsorption sites for the adsorbate molecules. The interaction energy between the Zn4O cluster and the adsorbate is larger than that between the organic linker and the adsorbate. It was further confirmed that the Zn4O cluster plays a much more important role in adsorption by pushing a probe molecule into the pore at positions closer to the Zn4O cluster. It is difficult for branched alkane molecules to approach the Zn4O cluster of IRMOF-6 closely owing to strong spatial hindrance. In addition, the adsorption selectivity is discussed from the viewpoints of thermodynamics and kinetics, and the diffusion behavior of n-butane and 2-methylpropane were investigated to illustrate the relationship between diffusion and adsorption.     

A new type of polyhedron-based metal-organic frameworks with interpenetrating cationic and anionic nets demonstrating ion exchange, adsorption and luminescent properties

An interesting new MOF, built with interpenetrating cationic (MOF-A(+)) and anionic (MOF-B(-)) nets that do not require counter ions to balance charge, together with an architectural strategy focused on the use of MOPs as nodes and MOCs as spacers for the generation of 3D frameworks, is reported.     

Stability effects on CO2 adsorption for the DOBDC series of metal-organic frameworks

Metal-organic frameworks with unsaturated metal centers in their crystal structures, such as Ni/DOBDC and Mg/DOBDC, are promising adsorbents for carbon dioxide capture from flue gas due to their high CO(2) capacities at subatmospheric pressures. However, stability is a critical issue for their application. In this paper, the stabilities of Ni/DOBDC and Mg/DOBDC are investigated. Effects of steam conditioning, simulated flue gas conditioning, and long-term storage on CO(2) adsorption capacities are considered. Results show that Ni/DOBDC can maintain its CO(2) capacity after steam conditioning and long-term storage, whereas Mg/DOBDC does not. Nitrogen isotherms for Mg/DOBDC show a drop in surface area after steaming, corresponding to the decrease in CO(2) adsorption, which may be caused by a reduction of unsaturated metal centers in its structure. Conditioning with dry simulated flue gas at room temperature only slightly affects CO(2) adsorption in Ni/DOBDC. However, introducing water vapor into the simulated flue gas further reduces the CO(2) capacity of Ni/DOBDC.     

High gas sorption and metal-ion exchange of microporous metal-organic frameworks with incorporated imide groups

Metal-organic frameworks (MOFs), {[Cu(2)(bdcppi)(dmf)(2)]·10DMF·2H(2)O}(n) (SNU-50) and {[Zn(2)(bdcppi)(dmf)(3)]·6DMF·4H(2)O}(n) (SNU-51), have been prepared by the solvothermal reactions of N,N'-bis(3,5-dicarboxyphenyl)pyromellitic diimide (H(4)BDCPPI) with Cu(NO(3))(2) and Zn(NO(3))(2), respectively. Framework SNU-50 has an NbO-type net structure, whereas SNU-51 has a PtS-type net structure. Desolvated solid [Cu(2)(bdcppi)](n) (SNU-50'), which was prepared by guest exchange of SNU-50 with acetone followed by evacuation at 170 °C, adsorbs high amounts of N(2), H(2), O(2), CO(2), and CH(4) gases due to the presence of a vacant coordination site at every metal ion, and to the presence of imide groups in the ligand. The Langmuir surface area is 2450 m(2) g(-1). It adsorbs H(2) gas up to 2.10 wt% at 1 atm and 77 K, with zero coverage isosteric heat of 7.1 kJ mol(-1), up to a total of 7.85 wt% at 77 K and 60 bar. Its CO(2) and CH(4) adsorption capacities at 298 K are 77 wt% at 55 bar and 17 wt% at 60 bar, respectively. Of particular note is the O(2) adsorption capacity of SNU-50' (118 wt% at 77 K and 0.2 atm), which is the highest reported so far for any MOF. By metal-ion exchange of SNU-51 with Cu(II), {[Cu(2)(bdcppi)(dmf)(3)]·7DMF·5H(2)O}(n) (SNU-51-Cu(DMF)) with a PtS-type net was prepared, which could not be synthesized by a direct solvothermal reaction.     

Mixed-ligand metal-organic frameworks with large pores: gas sorption properties and single-crystal-to-single-crystal transformation on guest exchange

Two isomorphous 3D metal-organic frameworks, {[Cu2(BPnDC)2(bpy)].8 DMF.6 H2O}n (1) and {[Zn2(BPnDC)2(dabco)].13 DMF.3 H2O}n (2), have been prepared by the solvothermal reactions of benzophenone 4,4'-dicarboxylic acid (H2BPnDC) with Cu(NO3)(2).2.5 H2O and 4,4'-bipyridine (bpy), and with Zn(NO3)(2).6 H2O and 4-diazabicyclo[2.2.2]octane (dabco), respectively. Compounds 1 and 2 are composed of paddle-wheel {M2(O2CR)4} cluster units, and they generate 2D channels with two different large pores (effective size of larger pore: 18.2 A for 1, 11.4 A for 2). The framework structure of desolvated solid, [Cu2(BPnDC)2(bpy)]n (SNU-6; SNU=Seoul National University), is the same as that of 1, as evidenced by powder X-ray diffraction patterns. SNU-6 exhibits high permanent porosity (1.05 cm3 g(-1)) with high Langmuir surface area (2910 m2 g(-1)). It shows high H2 gas storage capacity (1.68 wt % at 77 K and 1 atm; 4.87 wt % (excess) and 10.0 wt % (total) at 77 K and 70 bar) with high isosteric heat (7.74 kJ mol(-1)) of H2 adsorption as well as high CO2 adsorption capability (113.8 wt % at 195 K and 1 atm). Compound 2 undergoes a single-crystal-to-single-crystal transformation on guest exchange with n-hexane to provide {[Zn2(BPnDC)2(dabco)].6 (n-hexane).3 H2O}n (2hexane). The transformation involves dynamic motion of the molecular components in the crystal, mainly a bending motion of the square planes of the paddle-wheel units resulting from rotational rearrangement of phenyl rings and carboxylate planes of BPnDC2-.