Mechanistic insight into protonolysis and cis-trans isomerization of benzylplatinum(II) complexes assisted by weak ligand-to-metal interactions. A combined kinetic and DFT study

Low-temperature NMR measurements showed that protonolysis and deuterolysis by H(D)X acids on meta- and para-substituted dibenzylplatinum(II) complexes cis-[Pt(CH(2)Ar)(2)(PEt(3))(2)] (Ar = C(6)H(4)Y(-); Y = 4-Me, 1a; 3-Me, 1b; H, 1c; 4-F, 1d; 3-F, 1e; 4-Cl, 1f; 3-Cl, 1g; 3-CF(3), 1h) in CD(3)OD leads directly to the formation of trans-[Pt(CH(2)Ar)(PEt(3))(2)(CD(3)OD)]X (4a-4h) and toluene derivatives. The reaction obeys the rate law k(obsd) = k(H)[H(+)]. For CH(2)Ar = CH(2)C(6)H(5)(-), k(H) = 176 ± 3 M(-1) s(-1) and k(D) = 185 ± 5 M(-1) s(-1) at 298.2 K, ΔH(double dagger) = 46 ± 1 kJ mol(-1) and ΔS(double dagger) = -47 ± 1 J K(-1) mol(-1). In contrast, in acetonitrile-d(3), three subsequent stages can be distinguished, at different temperature ranges: (i) instantaneous formation of new benzylhydridoplatinum(IV) complexes cis-[Pt(CH(2)Ar)(2)(H)(CD(3)CN)(PEt(3))(2)]X (2a-2h, at 230 K), (ii) reductive elimination of 2a-2h to yield cis-[Pt(CH(2)Ar)(CD(3)CN)(PEt(3))(2)]X (3a-3h) and toluene derivatives (in the range 230-255 K), and finally (iii) spontaneous isomerization of the cis cationic solvento species to the corresponding trans isomers (4a-4h, in the range 260-280 K). All compounds were detected and fully characterized through their (1)H and (31)P{(1)H} NMR spectra. Kinetics monitored by (1)H and (31)P{(1)H} NMR and isotopic scrambling experiments on cis-[Pt(CH(2)Ar)(2)(H)(CD(3)CN)(PEt(3))(2)]X gave some insight onto the mechanism of reductive elimination of 2a-2h. Systematic kinetics of isomerization of 3a-3h were followed in the temperature range 285-320 K by stopped-flow techniques. The process goes, as expected, through the relatively slow dissociative loss of the weakly bonded solvent molecule and interconversion of two geometrically distinct T-shaped three-coordinate intermediates. The dissociation energy depends upon the solvent-coordinating ability. DFT optimization reveals that along the energy profile the "cis-like" [Pt(CH(2)Ar)(PMe(3))(2)](+) intermediate is strongly stabilized by a Pt···η(2)-C1-C(ipso) bond between the unsaturated metal and benzyl carbons. The value of the ensuing stabilization energy was estimated by computational data to be greater than that found for similar β-agostic Pt···η(2)-CH interactions with alkyl groups containing β-hydrogens. An observed consequence of the strong stabilization of "cis"-[Pt(η(2)-CH(2)Ar)(PMe(3))(2)](+) is the remarkable acceleration of the rate of isomerization, greater than that produced by the so-called "β-hydrogen kinetic effect". Kinetic and DFT data concur to indicate that electron donation by substituents on the benzyl ring leads to further stabilization of the "cis"-[Pt(η(2)-CH(2)Ar)(PMe(3))(2)](+) cationic species.     

Studies of reductive elimination reactions to form carbon-oxygen bonds from Pt(IV) complexes.

The platinum(IV) complexes fac-L(2)PtMe(3)(OR) (L(2) = bis(diphenylphosphino)ethane, o-bis(diphenylphosphino)benzene, R = carboxyl, aryl; L = PMe(3), R = aryl) undergo reductive elimination reactions to form carbon-oxygen bonds and/or carbon-carbon bonds. The carbon-oxygen reductive elimination reaction produces either methyl esters or methyl aryl ethers (anisoles) and L(2)PtMe(2), while the carbon-carbon reductive elimination reaction affords ethane and L(2)PtMe(OR). Choice of reaction conditions allows the selection of either type of coupling over the other. A detailed mechanistic study of the reductive elimination reactions supports dissociation of the OR(-) ligand as the initial step for the C-O bond formation reaction. This is followed by a nucleophilic attack of OR(-) upon a methyl group bound to the Pt(IV) cation to produce the products MeOR and L(2)PtMe(2). C-C reductive elimination proceeds from L(2)PtMe(3)(OR) by initial L (L = PMe(3)) or OR(-) (L(2) = dppe, dppbz) dissociation, followed by C-C coupling from the resulting five-coordinate intermediate. Our studies demonstrate that both C-C and C-O reductive elimination reactions from Pt(IV) are more facile in polar solvents, in the presence of Lewis acids, and for OR(-) groups that contain electron withdrawing substituents.     

Mechanisms of reductive eliminations in square planar Pd(II) complexes: nature of eliminated bonds and role of trans influence

The trans influence of various phosphine ligands (L) in direct as well as dissociative reductive elimination pathways yielding CH(3)CH(3) from Pd(CH(3))(2)L(2) and CH(3)Cl from Pd(CH(3))(Cl)L(2) has been quantified in terms of isodesmic reaction energy, E(trans), using the MPWB1K level of density functional theory. In the absence of a large steric effect, E(trans) correlated linearly with the activation barrier (E(act)) of both direct and dissociation pathways. The minimum of molecular electrostatic potential (V(min)) at the lone pair region of phosphine ligands has been used to assess their electron donating power. E(trans) increased linearly with an increase in the negative V(min) values. Further, the nature of bonds that are eliminated during reductive elimination have been analyzed in terms of AIM parameters, viz. electron density (ρ(r)), Laplacian of the electron density (?(2)ρ(r)), total electron energy density (H(r)), and ratio of potential and kinetic electron energy densities (k(r)). Interestingly, E(act) correlated inversely with the strength of the eliminated metal-ligand bonds measured in terms of the bond length or the ρ(r). Analysis of H(r) showed that elimination of the C-C/C-Cl bond becomes more facile when the covalent character of the Pd-C/Pd-Cl bond increases. Thus, AIM details clearly showed that the strength of the eliminated bond is not the deciding factor for the reductive elimination but the nature of the bond, covalent or ionic. Further, a unified picture showing the relationship between the nature of the eliminated chemical bond and the tendency of reductive elimination is obtained from the k(r) values: the E(act) of both direct and dissociative mechanisms for the elimination of CH(3)CH(3) and CH(3)Cl decreased linearly when the sum of k(r) at the cleaved bonds showed a more negative character. It means that the potential electron energy density dominates over the kinetic electron energy density when the bonds (Pd-C/Pd-Cl) become more covalent and the eliminated fragments attain more radical character leading to the easy formation of C-C/C-Cl bond.     

Mechanistic insight into the cleavage of an aromatic C-C bond by tungsten

The pathway for the cleavage of an aromatic C-C bond in quinoxaline by a tungsten(II) complex [W(PMe(3))(4)(η(2)-CH(2)PMe(2))H] is explored by performing detailed DFT calculations. The real active complex was found to be [W(PMe(3))(2)(η(2)-CH(2)PMe(2))H] rather than [W(PMe(3))(4)]. The key step in the whole reaction is the reductive elimination of two hydrides that are located originally on quinoxaline (see scheme).     

Mechanisms of C-C and C-H alkane reductive eliminations from octahedral Pt(IV): reaction via five-coordinate intermediates or direct elimination?

The Pt(IV) complexes P(2)PtMe(3)R [P(2) = dppe (PPh(2)(CH(2))(2)PPh(2)), dppbz (o-PPh(2)(C(6)H(4))PPh(2)); R = Me, H] undergo reductive elimination reactions to form carbon-carbon or carbon-hydrogen bonds. Mechanistic studies have been carried out for both C-C and C-H coupling reactions and the reductive elimination reactions to form ethane and methane are directly compared. For C-C reductive elimination, the evidence supports a mechanism of initial phosphine chelate opening followed by C-C coupling from the resulting five-coordinate intermediate. In contrast, mechanistic studies on C-H reductive elimination support an unusual pathway at Pt(IV) of direct coupling without preliminary ligand loss. The complexes fac- P(2)PtMe(3)R (P(2) = dppe, R = Me, H; P(2) = dppbz, R = Me) have been characterized crystallographically. The Pt(IV) hydrides, fac-P(2)PtMe(3)H (P(2) = dppe, dppbz), are rare examples of stable phosphine ligated Pt(IV) alkyl hydride complexes.     

Alkyl carbon-nitrogen reductive elimination from platinum(IV)-sulfonamide complexes

Platinum(IV) complexes containing monodentate sulfonamide ligands, fac-(dppbz)PtMe(3)(NHSO(2)R) (dppbz = o-bis(diphenylphosphino)benzene; R = p-C(6)H(4)(CH2)(3)CH(3) (1a), p-C(6)H(4)CH(3) (1b), CH(3) (1c)), have been synthesized and characterized, and their thermal reactivity has been explored. Compounds 1a-c undergo competitive C-N and C-C reductive elimination upon thermolysis to form N-methylsulfonamides and ethane, respectively. Selectivity for either C-N or C-C bond formation can be achieved by altering the reaction conditions. Good yields of the C-N-coupled products were observed when the thermolyses of 1a-c were conducted in benzene-d(6). In contrast, exclusive C-C reductive elimination occurred upon themolysis of 1a,b in nitrobenzene-d(5). When the thermolyses of 1a were performed in the presence of sulfonamide anion NHSO2R- in benzene-d(6), ethane elimination was completely inhibited and C-N reductive elimination products were formed in high yield. Mechanistic studies support a two-step reaction pathway involving initial dissociation of NHSO(2)R(-) from the platinum center, followed by nucleophilic attack of this anion on a methyl group of the resulting five-coordinate platinum(IV) cation to form MeNHSO(2)R and (dppbz)PtMe(2). C-C reductive elimination to form ethane occurs directly from the five-coordinate Pt(IV) cation.     

Structure and reactivity of bis(silyl) dihydride complexes (PMe(3))(3)Ru(SiR(3))(2)(H)(2): model compounds and real intermediates in a dehydrogenative C-Si bond forming reaction

A series of stable complexes, (PMe(3))(3)Ru(SiR(3))(2)(H)(2) ((SiR(3))(2) = (SiH(2)Ph)(2), 3a; (SiHPh(2))(2), 3b; (SiMe(2)CH(2)CH(2)SiMe(2)), 3c), has been synthesized by the reaction of hydridosilanes with (PMe(3))(3)Ru(SiMe(3))H(3) or (PMe(3))(4)Ru(SiMe(3))H. Compounds 3a and 3c adopt overall pentagonal bipyramidal geometries in solution and the solid state, with phosphine and silyl ligands defining trigonal bipyramids and ruthenium hydrides arranged in the equatorial plane. Compound 3a exhibits meridional phosphines, with both silyl ligands equatorial, whereas the constraints of the chelate in 3c result in both axial and equatorial silyl environments and facial phosphines. Although there is no evidence for agostic Si-H interactions in 3a and 3b, the equatorial silyl group in 3c is in close contact with one hydride (1.81(4) A) and is moderately close to the other hydride (2.15(3) A) in the solid state and solution (nu(Ru.H.Si) = 1740 cm(-)(1) and nu(RuH) = 1940 cm(-)(1)). The analogous bis(silyl) dihydride, (PMe(3))(3)Ru(SiMe(3))(2)(H)(2) (3d), is not stable at room temperature, but can be generated in situ at low temperature from the 16e(-) complex (PMe(3))(3)Ru(SiMe(3))H (1) and HSiMe(3). Complexes 3b and 3d have been characterized by multinuclear, variable temperature NMR and appear to be isostructural with 3a. All four complexes exhibit dynamic NMR spectra, but the slow exchange limit could not be observed for 3c. Treatment of 1 with HSiMe(3) at room temperature leads to formation of (PMe(3))(3)Ru(SiMe(2)CH(2)SiMe(3))H(3) (4b) via a CH functionalization process critical to catalytic dehydrocoupling of HSiMe(3) at higher temperatures. Closer inspection of this reaction between -110 and -10 degrees C by NMR reveals a plethora of silyl hydride phosphine complexes formed by ligand redistribution prior to CH activation. Above ca. 0 degrees C this mixture converts cleanly via silane dehydrogenation to the very stable tris(phosphine) trihydride carbosilyl complex 4b. The structure of 4b was determined crystallographically and exhibits a tetrahedral P(3)Si environment around the metal with the three hydrides adjacent to silicon and capping the P(2)Si faces. Although strong Si.HRu interactions are not indicated in the structure or by IR, the HSi distances (2.00(4) - 2.09(4) A) and average coupling constant (J(SiH) = 25 Hz) suggest some degree of nonclassical SiH bonding in the RuH(3)Si moiety. The least hindered complex, 3a, reacts with carbon monoxide principally via an H(2) elimination pathway to yield mer-(PMe(3))(3)(CO)Ru(SiH(2)Ph)(2), with SiH elimination as a minor process. However, only SiH elimination and formation of (PMe(3))(3)(CO)Ru(SiR(3))H is observed for 3b-d. The most hindered bis(silyl) complex, 3d, is extremely labile and even in the absence of CO undergoes SiH reductive elimination to generate the 16e(-) species 1 (DeltaH(SiH)(-)(elim) = 11.0 +/- 0.6 kcal x mol(-)(1) and DeltaS(SiH)(-)(elim) = 40 +/- 2 cal x mol(-)(1) x K(-)(1); Delta = 9.2 +/- 0.8 kcal x mol(-)(1) and Delta = 9 +/- 3 cal x mol(-)(1).K(-)(1)). The minimum barrier for the H(2) reductive elimination can be estimated, and is higher than that for silane elimination at temperatures above ca. -50 degrees C. The thermodynamic preferences for oxidative additions to 1 are dominated by entropy contributions and steric effects. Addition of H(2) is by far most favorable, whereas the relative aptitudes for intramolecular silyl CH activation and intermolecular SiH addition are strongly dependent on temperature (DeltaH(SiH)(-)(add) = -11.0 +/- 0.6 kcal x mol(-)(1) and DeltaS(SiH)(-)(add) = -40 +/- 2 cal.mol(-)(1) x K(-)(1); DeltaH(beta)(-CH)(-)(add) = -2.7 +/- 0.3 kcal x mol(-)(1) and DeltaS(beta)(-CH)(-)(add) = -6 +/- 1 cal x mol(-)(1) x K(-)(1)). Kinetic preferences for oxidative additions to 1 - intermolecular SiH and intramolecular CH - have been also quantified: Delta = -1.8 +/- 0.8 kcal x mol(-)(1) and Delta = -31 +/- 3 cal x mol(-)(1).K(-)(1); Delta = 16.4 +/- 0.6 kcal x mol(-)(1) and Delta = -13 +/- 6 cal x mol(-)(1).K(-)(1). The relative enthalpies of activation (-)(1) x K(-)(1)). Kinetic preferences for oxidative additions to 1 - intermolecular SiH and intramolecular CH - have been also quantified: Delta (H)SiH(add) = 1.8 +/- 0.8 kcal x mol(-)(1) and Delta S((SiH-add) =31+/- 3 cal x mol(-)(1) x K(-)(1); Delta S (SiH -add) = 16.4 +/- 0.6 kcal x mol(-)(1) and =Delta S (SiH -CH -add) =13+/- 6 cal x mol(-)(1) x K(-)(1). The relative enthalpies of activation are interpreted in terms of strong SiH sigma-complex formation - and much weaker CH coordination - in the transition state for oxidative addition.     

The synthesis, characterisation and reactivity of 2-phosphanylethylcyclopentadienyl complexes of cobalt, rhodium and iridium

2-Phosphanylethylcyclopentadienyl lithium compounds, Li[C(5)R'(4)(CH(2))(2)PR(2)] (R = Et, R' = H or Me, R = Ph, R' = Me), have been prepared from the reaction of spirohydrocarbons C(5)R'(4)(C(2)H(4)) with LiPR(2). C(5)Et(4)HSiMe(2)CH(2)PMe(2), was prepared from reaction of Li[C(5)Et(4)] with Me(2)SiCl(2) followed by Me(2)PCH(2)Li. The lithium salts were reacted with [RhCl(CO)(2)](2), [IrCl(CO)(3)] or [Co(2)(CO)(8)] to give [M(C(5)R'(4)(CH(2))(2)PR(2))(CO)] (M = Rh, R = Et, R' = H or Me, R = Ph, R' = Me; M = Ir or Co, R = Et, R' = Me), which have been fully characterised, in many cases crystallographically as monomers with coordination of the phosphorus atom and the cyclopentadienyl ring. The values of nu(CO) for these complexes are usually lower than those for the analogous complexes without the bridge between the cyclopentadienyl ring and the phosphine, the exception being [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (Cp' = C(5)Me(4)), the most electron rich of the complexes. [Rh(C(5)Et(4)SiMe(2)CH(2)PMe(2))(CO)] may be a dimer. [Co(2)(CO)(8)] reacts with C(5)H(5)(CH(2))(2)PEt(2) or C(5)Et(4)HSiMe(2)CH(2)PMe(2) (L) to give binuclear complexes of the form [Co(2)(CO)(6)L(2)] with almost linear PCoCoP skeletons. [Rh(Cp'(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are active for methanol carbonylation at 150 degrees C and 27 bar CO, with the rate using [Rh(Cp'(CH(2))(2)PPh(2))(CO)] (0.81 mol dm(-3) h(-1)) being higher than that for [RhI(2)(CO)(2)](-) (0.64 mol dm(-3) h(-1)). The most electron rich complex, [Rh(Cp'(CH(2))(2)PEt(2))(CO)] (0.38 mol dm(-3) h(-1)) gave a comparable rate to [Cp*Rh(PEt(3))(CO)] (0.30 mol dm(-3) h(-1)), which was unstable towards oxidation of the phosphine. [Rh(Cp'(CH(2))(2)PEt(2))I(2)], which is inactive for methanol carbonylation, was isolated after the methanol carbonylation reaction using [Rh(Cp'(CH(2))(2)PEt(2))(CO)]. Neither of [M(Cp'(CH(2))(2)PEt(2))(CO)] (M = Co or Ir) was active for methanol carbonylation under these conditions, nor under many other conditions investigated, except that [Ir(Cp'(CH(2))(2)PEt(2))(CO)] showed some activity at higher temperature (190 degrees C), probably as a result of degradation to [IrI(2)(CO)(2)](-). [M(Cp'(CH(2))(2)PEt(2))(CO)] react with MeI to give [M(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] (M = Co or Rh) or [Ir(Cp'(CH(2))(2)PEt(2))Me(CO)]I. The rates of oxidative addition of MeI to [Rh(C(5)H(4)(CH(2))(2)PEt(2))(CO)] and [Rh(Cp'(CH(2))(2)PPh(2))(CO)] are 62 and 1770 times faster than to [Cp*Rh(CO)(2)]. Methyl migration is slower, however. High pressure NMR studies show that [Co(Cp'(CH(2))(2)PEt(2))(CO)] and [Cp*Rh(PEt(3))(CO)] are unstable towards phosphine oxidation and/or quaternisation under methanol carbonylation conditions, but that [Rh(Cp'(CH(2))(2)PEt(2))(CO)] does not exhibit phosphine degradation, eventually producing inactive [Rh(Cp'(CH(2))(2)PEt(2))I(2)] at least under conditions of poor gas mixing. The observation of [Rh(Cp'(CH(2))(2)PEt(2))(C(O)Me)I] under methanol carbonylation conditions suggests that the rhodium centre has become so electron rich that reductive elimination of ethanoyl iodide has become rate determining for methanol carbonylation. In addition to the high electron density at rhodium.     

Vinyl-vinyl coupling on late transition metals through C-C reductive elimination mechanism. A computational study

A detailed density functional study was performed for the vinyl-vinyl reductive elimination reaction from bis-sigma-vinyl complexes [M(CH=CH(2))(2)X(n)]. It was shown that the activity of these complexes decreases in the following order: Pd(IV), Pd(II) > Pt(IV), Pt(II), Rh(III) > Ir(III), Ru(II), Os(II). The effects of different ligands X were studied for both platinum and palladium complexes, which showed that activation barriers for C-C bond formation reaction decrease in the following order: X = Cl > Br, NH(3) > I > PH(3). Steric effects induced either by the ligands X or by substituents on the vinyl group were also examined. In addition, the major factors responsible for stereoselectivity control on the final product formation stage and possible involvement of asymmetric coupling pathways are reported. In all cases DeltaE, DeltaH, DeltaG, and DeltaG(aq) energy surfaces were calculated and analyzed. The solvent effect calculation shows that in a polar medium halogen complexes may undergo a reductive elimination reaction almost as easily as compounds with phosphine ligands.     

C-H vs C-C bond activation of acetonitrile and benzonitrile via oxidative addition: rhodium vs nickel and Cp* vs Tp' (Tp' = hydrotris(3,5-dimethylpyrazol-1-yl)borate, Cp* = η(5)-pentamethylcyclopentadienyl)

The photochemical reaction of (C(5)Me(5))Rh(PMe(3))H(2) (1) in neat acetonitrile leads to formation of the C-H activation product, (C(5)Me(5))Rh(PMe(3))(CH(2)CN)H (2). Thermolysis of this product in acetonitrile or benzene leads to thermal rearrangement to the C-C activation product, (C(5)Me(5))Rh(PMe(3))(CH(3))(CN) (4). Similar results were observed for the reaction of 1 with benzonitrile. The photolysis of 1 in neat benzonitrile results in C-H activation at the ortho, meta, and para positions. Thermolysis of the mixture in neat benzonitrile results in clean conversion to the C-C activation product, (C(5)Me(5))Rh(PMe(3))(C(6)H(5))(CN) (5). DFT calculations on the acetonitrile system show the barrier to C-H activation to be 4.3 kcal mol(-1) lower than the barrier to C-C activation. A high-energy intermediate was also located and found to connect the transition states leading to C-H and C-C activation. This intermediate has an agostic hydrogen interaction with the rhodium center. Reactions of acetonitrile and benzonitrile with the fragment [Tp'Rh(CNneopentyl)] show only C-H and no C-C activation. These reactions with rhodium are compared and contrasted to related reactions with [Ni(dippe)H](2), which show only C-CN bond cleavage.     

Synthesis and reactivity of silyl ruthenium complexes: the importance of trans effects in C-H activation,Si-C bond formation,and dehydrogenative coupling of silanes

A series of octahedral ruthenium silyl hydride complexes, cis-(PMe(3))(4)Ru(SiR(3))H (SiR(3) = SiMe(3), 1a; SiMe(2)CH(2)SiMe(3), 1b; SiEt(3), 1c; SiMe(2)H, 1d), has been synthesized by the reaction of hydrosilanes with (PMe(3))(3)Ru(eta(2)-CH(2)PMe(2))H (5), cis-(PMe(3))(4)RuMe(2) (6), or (PMe(3))(4)RuH(2) (9). Reaction with 6 proceeds via an intermediate product, cis-(PMe(3))(4)Ru(SiR(3))Me (SiR(3) = SiMe(3), 7a; SiMe(2)CH(2)SiMe(3), 7b). Alternatively, 1 and 7 have been synthesized via a fast hydrosilane exchange with another cis-(PMe(3))(4)Ru(SiR(3))H or cis-(PMe(3))(4)Ru(SiR(3))Me, which occurs at a rate approaching the NMR time scale. Compounds 1a, 1b, 1d, and 7a adopt octahedral geometries in solution and the solid state with mutually cis silyl and hydride (or silyl and methyl) ligands. The longest Ru-P distance within a complex is always trans to Si, reflecting the strong trans influence of silicon. The aptitude of phosphine dissociation in these complexes has been probed in reactions of 1a, 1c, and 7a with PMe(3)-d(9) and CO. The dissociation is regioselective in the position trans to a silyl ligand (trans effect of Si), and the rate approaches the NMR time scale. A slower secondary process introduces PMe(3)-d(9) and CO in the other octahedral positions, most likely via nondissociative isomerization. The trans effect and trans influence in 7a are so strong that an equilibrium concentration of dissociated phosphine is detectable (approximately 5%) in solution of pure 7a. Compounds 1a-c also react with dihydrogen via regioselective dissociation of phosphine from the site trans to Si, but the final product, fac-(PMe(3))(3)Ru(SiR(3))H(3) (SiR(3) = SiMe(3), 4a; SiMe(2)CH(2)SiMe(3), 4b; SiEt(3), 4c), features hydrides cis to Si. Alternatively, 4a-c have been synthesized by photolysis of (PMe(3))(4)RuH(2) in the presence of a hydrosilane or by exchange of fac-(PMe(3))(3)Ru(SiR(3))H(3) with another HSiR(3). The reverse manifold - HH elimination from 4a and trapping with PMe(3) or PMe(3)-d(9) - is also regioselective (1a-d(9)() is predominantly produced with PMe(3)-d(9) trans to Si), but is very unfavorable. At 70 degrees C, a slower but irreversible SiH elimination also occurs and furnishes (PMe(3))(4)RuH(2). The structure of 4a exhibits a tetrahedral P(3)Si environment around the metal with the three hydrides adjacent to silicon and capping the P(2)Si faces. Although strong Si...HRu interactions are not indicated in the structure or by IR, the HSi distances (2.13-2.23(5) A) suggest some degree of nonclassical SiH bonding in the H(3)SiR(3) fragment. Thermolysis of 1a in C(6)D(6) at 45-55 degrees C leads to an intermolecular CD activation of C(6)D(6). Extensive H/D exchange into the hydride, SiMe(3), and PMe(3) ligands is observed, followed by much slower formation of cis-(PMe(3))(4)Ru(D)(Ph-d(5)). In an even slower intramolecular CH activation process, (PMe(3))(3)Ru(eta(2)-CH(2)PMe(2))H (5) is also produced. The structure of intermediates, mechanisms, and aptitudes for PMe(3) dissociation and addition/elimination of H-H, Si-H, C-Si, and C-H bonds in these systems are discussed with a special emphasis on the trans effect and trans influence of silicon and ramifications for SiC coupling catalysis.     

Carbon-fluorine bond activation coupled with carbon-carbon bond formation at iridium. Confirmation of complete kinetic diastereoselectivity at the new carbon stereocenter by intramolecular trapping using vinyl as the migrating group

The iridium(perfluoropropyl)(vinyl) complex CpIr(PMe(3))(n-C(3)F(7))(CH=CH(2)) (5) has been prepared. It has been characterized by X-ray crystallography, and its ground state conformation in solution has been determined by (19)F{(1)H} HOESY NMR studies. It reacts with the weak acid lutidinium iodide to afford the eta(1)-allylic complex CpIr(PMe(3))((Z)-CH(2)CH=CFC(2)F(5))I (6), which has also been characterized crystallographically. The mechanism of C-F bond activation and C-C bond formation leading to 6 has been elucidated in detail by studying the reaction of 5 with lutidinium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate [LutH(+)B(ArF)(4)(-)], containing a weakly coordinating counteranion. The main kinetic product of this reaction, determined by (19)F{(1)H} HOESY studies at -50 degrees C, is the endo-CpIr(PMe(3))(anti-eta(3)-CH(2)CHCFCF(2)CF(3))[B(ArF)(4)] diastereomer 9, along with a small amount of the exo-syn-isomer 8. Isomer 9 rearranges at -20 degrees C to its exo-anti isomer 7, and subsequently to the thermodynamically favored exo-syn-isomer 8, which has been isolated and crystallographically characterized. Complex 8 reacts with iodide to afford complex6. On the basis of the unambiguously defined kinetically controlled stereochemistry of 9 and 8, a detailed mechanism for the C-F activation/C-C coupling reaction is proposed, the principal conclusion of which is that C-F activation is completely diastereoselective.     

Surface Organometallic Chemistry on Oxides: Reaction of Trimethylphosphine with Bis(allyl)rhodium Grafted onto Silica

The reaction of Rh(eta(3)-C(3)H(5))(3) with the surface hydroxyl groups of partially dehydroxylated silica leads to the formation of the surface organometallic complex (&tbd1;SiO)(&tbd1;SiOX)Rh(eta(3)-C(3)H(5))(2), 1 (where X is H or Si&tbd1;), with evolution of propene. The reaction of 1 with PMe(3) was examined, and two major pathways were discovered. Reductive elimination of two allyl ligands as 1,5-hexadiene and coordination of PMe(3) give the surface product (&tbd1;SiO)Rh(PMe(3))(3), 2, which was characterized by elemental analysis, IR and (31)P MAS NMR spectroscopy. We also prepared 2 independently from CH(3)Rh(PMe(3))(3) and partially dehydroxylated silica. The second major reaction pathway is the elimination of propene to give (&tbd1;SiO)(2)Rh(eta(1)-C(3)H(5))(PMe(3))(3), 3. The presence of the sigma-bound allyl ligand was inferred from its characteristic IR spectrum. The reactivity of 3 toward CO was examined: insertion of CO into the Rh-C bond followed by reductive elimination of the silyl ester &tbd1;SiOC(O)C(3)H(5) produces (&tbd1;SiO)Rh(CO)(PMe(3))(2), 4. In static vacuum, 3 decomposes to give allyl alcohol, which is slowly decarbonylated by 2.     

Density Functional Study on the Reaction Mechanism for the Reaction of Ni^＋ with Ethane

The mechanism of the reaction of Ni^ (^2D) with ethane in the gas-phase was studied by using density functional theory.Both the B3LYP and BLYP functionals with standard all-electron basis sets are used to give the detailed information of the potential energy surface (PES) of [Ni,C2,H6]^ . The mechanisms forming the products CH4 and H2 in the reaction of Ni^ with ethane are proposed.The reductive eliminations of CH4 and H2 are typical addition-elimination reactions.Each of the two reactions consists of two elementary steps:C-C or C-H bond activations to form inserted species followed by isomerizations to from product-like intermediate.The rate determining steps for the elimination reactions of forming CH4 and H2 are the isomerization of the inserted species rather than C-C or C-H bond activations .The elimination reaction of forming H2 was found to be thermodynamically favored compared to that of CH4.     

Scope and mechanism of the intermolecular addition of aromatic aldehydes to olefins catalyzed by Rh(I) olefin complexes

Rhodium (I) bis-olefin complexes Cp*Rh(VTMS)(2) and CpRh(VTMS)(2) (Cp* = C(5)Me(5), Cp = C(5)Me(4)CF(3), VTMS = vinyl trimethylsilane) were found to catalyze the addition of aromatic aldehydes to olefins to form ketones. Use of the more electron-deficient catalyst CpRh(VTMS)(2) results in faster reaction rates, better selectivity for linear ketone products from alpha-olefins, and broader reaction scope. NMR studies of the hydroacylation of vinyltrimethylsilane showed that the starting Rh(I) bis-olefin complexes and the corresponding Cp*/Rh(CH(2)CH(2)SiMe(3))(CO)(Ar) complexes were catalyst resting states, with an equilibrium established between them prior to turnover. Mechanistic studies suggested that CpRh(VTMS)(2) displayed a faster turnover frequency (relative to Cp*Rh(VTMS)(2)) because of an increase in the rate of reductive elimination, the turnover-limiting step, from the more electron-deficient metal center of CpRh(VTMS)(2). Reaction of Cp*/Rh(CH(2)CH(2)SiMe(3))(CO)(Ar) with PMe(3) yields acyl complexes Cp*/Rh[C(O)CH(2)CH(2)SiMe(3)](PMe(3))(Ar); measured first-order rates of reductive elimination of ketone from these Rh(III) complexes established that the Cp ligand accelerates this process relative to the Cp* ligand.     

Mechanism of olefin metathesis with catalysis by ruthenium carbene complexes: density functional studies on model systems

Gradient-corrected (BP86) density functional calculations were used to study alternative mechanisms of the metathesis reactions between ethene and model catalysts [(PH(3))(L)Cl(2)Ru[double bond]CH(2)] with L=PH3 (I) and L=C(3)N(2)H(4)=imidazol-2-ylidene (II). On the associative pathway, the initial addition of ethene is calculated to be rate-determining for both catalysts (Delta G(22-25)*[double bond] kcal mol(-1)). The dissociative pathway starts with the dissociation of phosphane, which is rather facile (Delta G(298)* is approximately equal to 5-10 kcal mol(-1)). The resulting active species (L)Cl(2)Ru[double bond]CH(2) can coordinate ethene cis or trans to L. The cis addition is unfavorable and mechanistically irrelevant (Delta G(298)* is approximately equal to 21-25 kcal mol(-1)). The trans coordination is barrierless, and the rate-determining step in the subsequent catalytic cycle is either ring closure of the complex to yield the ruthenacyclobutane (catalyst I, Delta G(298)*=12 kcal mol(-1)), or the reverse reaction (catalyst II, ring opening, Delta G(298)*=10 kcal mol(-1)), that is, II is slightly more active than I. For both catalysts, the dissociative mechanism with trans olefin coordination is favored. The relative energies of the species on this pathway can be tuned by ligand variation, as seen in (PMe(3))(2)Cl(2)Ru[double bond]CH(2) (III), in which phosphane dissociation is impeded and olefin insertion is facilitated relative to I. The differences in calculated relative energies for the model catalysts I-III can be rationalized in terms of electronic effects. Comparisons with experiment indicate that steric effects must also be considered for real catalysts containing bulky substituents.     

Synthesis, structure and DFT study of dinuclear iron, cobalt and nickel complexes with cyclopentadienyl-metal moieties

Reactions of 1,1'-bis(dipheny1phosphino)cobaltocene with Co(PMe(3))(4), Ni(PMe(3))(4), Fe(PMe(3))(4), Ni(COD)(2), FeMe(2)(PMe(3))(4) or NiMe(2)(PMe(3))(3) afford a series of novel dinuclear complexes [((Me(3)P)[lower bond 1 start]Co(η(5)-C(5)H(4)[upper bond 1 start]PPh(2)))((Me(3)P)M[upper bond 1 end](η(5)-C(5)H(4)P[lower bond 1 end]Ph(2)))] (M = Co(1), Ni(2) and Fe(3)) [Co(η(5)-C(5)H(4)[upper bond 1 start]PPh(2))(2)Ni[upper bond 1 end](COD)](4), [Co(η(5)-C(5)H(4)[upper bond 1 start]PPh(2))(2)Ni[upper bond 1 end](PMe(3))(2)] (5) and [((Me(3)P)[lower bond 1 start]Co(Me)(η(5)-C(5)H(4)[upper bond 1 start]PPh(2)))((Me(3)P)Fe[upper bond 1 end](Me)(η(5)-C(5)H(4)P[lower bond 1 end]Ph(2)))] (6). Reactions of 1,1'-bis(dipheny1phosphino)ferrocene with Ni(PMe(3))(4), NiMe(2)(PMe(3))(3), or Co(PMe(3))(4) gives rise to complexes [Fe(η(5)-C(5)H(4)[upper bond 1 start]PPh(2))(2)M[upper bond 1 end](PMe(3))(2)] (M = Ni (7), Co (8)). The complexes 1-8 were spectroscopically investigated and studied by X-ray single crystal diffraction. The possible reaction mechanisms and structural characteristics are discussed. Density functional theory (DFT) calculations strongly support the deductions.     

Synthetic and computational studies of the palladium(iv) system Pd(alkyl)(aryl)(alkynyl)(bidentate)(triflate) exhibiting selectivity in C-C reductive elimination

Synthetic routes to methyl(aryl)alkynylpalladium(iv) motifs are presented, together with studies of selectivity in carbon-carbon coupling by reductive elimination from Pd(IV) centres. The iodonium reagents IPh(C[triple bond, length as m-dash]CR)(OTf) (R = SiMe(3), Bu(t), OTf = O(3)SCF(3)) oxidise Pd(II)Me(p-Tol)(L(2)) (1-3) [L(2) = 1,2-bis(dimethylphosphino)ethane (dmpe) (1), 2,2'-bipyridine (bpy) (2), 1,10-phenanthroline (phen) (3)] in acetone-d(6) or toluene-d(9) at -80 °C to form complexes Pd(IV)(OTf)Me(p-Tol)(C[triple bond, length as m-dash]CR)(L(2)) [R = SiMe(3), L(2) = dmpe (4), bpy (5), phen (6); R = Bu(t), L(2) = dmpe (7), bpy (8), phen (9)] which reductively eliminate predominantly (>90%) p-Tol-C[triple bond, length as m-dash]CR above ～-50 °C. NMR spectra show that isomeric mixtures are present for the Pd(IV) complexes: three for dmpe complexes (4, 7), and two for bpy and phen complexes (5, 6, 8, 9), with reversible reduction in the number of isomers to two occurring between -80 °C and -60 °C observed for the dmpe complex 4 in toluene-d(8). Kinetic data for reductive elimination from Pd(IV)(OTf)Me(p-Tol)(C[triple bond, length as m-dash]CSiMe(3))(dmpe) (4) yield similar activation parameters in acetone-d(6) (66 ± 2 kJ mol(-1), ΔH(?) 64 ± 2 kJ mol(-1), ΔS(?)-67 ± 2 J K(-1) mol(-1)) and toluene-d(8) (E(a) 68 ± 3 kJ mol(-1), ΔH(?) 66 ± 3 kJ mol(-1), ΔS(?)-74 ± 3 J K(-1) mol(-1)). The reaction rate in acetone-d(6) is unaffected by addition of sodium triflate, indicative of reductive elimination without prior dissociation of triflate. DFT computational studies at the B97-D level show that the energy difference between the three isomers of 4 is small (12.6 kJ mol(-1)), and is similar to the energy difference encompassing the six potential transition state structures from these isomers leading to three feasible C-C coupling products (13.0 kJ mol(-1)). The calculations are supportive of reductive elimination occurring directly from two of the three NMR observed isomers of 4, involving lower activation energies to form p-TolC[triple bond, length as m-dash]CSiMe(3) and earlier transition states than for other products, and involving coupling of carbon atoms with higher s character of σ-bonds (sp(2) for p-Tol, sp for C[triple bond, length as m-dash]C-SiMe(3)) to form the product with the strongest C-C bond energy of the potential coupling products. Reductive elimination occurs predominantly from the isomer with Me(3)SiC[triple bond, length as m-dash]C trans to OTf. Crystal structure analyses are presented for Pd(II)Me(p-Tol)(dmpe) (1), Pd(II)Me(p-Tol)(bpy) (2), and the acetonyl complex Pd(II)Me(CH(2)COMe)(bpy) (11).     

Carbon-carbon reductive elimination from homoleptic uranium(IV) alkyls induced by redox-active ligands

The synthesis, characterization, and reactivity of the homoleptic uranium(IV) alkyls U(CH(2)C(6)H(5))(4) (1-Ph), U(CH(2)-p-CH(3)C(6)H(4))(4) (1-p-Me), and U(CH(2)-m-(CH(3))(2)C(6)H(3))(4) (1-m-Me(2)) are reported. The addition of 4 equiv of K(CH(2)Ar) (Ar = Ph, p-CH(3)C(6)H(4), m-(CH(3))(2)C(6)H(3)) to UCl(4) at -108 °C produces 1-Ph in good yields and 1-p-Me and 1-m-Me(2) in moderate yields. Further characterization of 1-Ph by X-ray crystallography confirmed η(4)-coordination of each benzyl ligand to the uranium center. Magnetic studies produced an effective magnetic moment of 2.60 μ(B) at 23 °C, which is consistent with a tetravalent uranium 5f(2) electronic configuration. Addition of 1 equiv of the redox-active α-diimine (Mes)DAB(Me) ((Mes)DAB(Me) = [ArN═C(Me)C(Me)═NAr]; Ar = 2,4,6-trimethylphenyl (Mes)) to 1-Ph results in reductive elimination of 1 equiv of bibenzyl (PhCH(2)CH(2)Ph), affording ((Mes)DAB(Me))U(CH(2)C(6)H(5))(2) (2-Ph). Treating an equimolar mixture of 1-Ph and 1-Ph-d(28) with (Mes)DAB(Me) forms the products from monomolecular reductive elimination, 2-Ph, 2-Ph-d(14), bibenzyl, and bibenzyl-d(14). This is confirmed by (1)H NMR spectroscopy and GC/MS analysis of both organometallic and organic products. Addition of 1 equiv of 1,2-bis(dimethylphosphino)ethane (dmpe) to 1-Ph results in formation of the previously synthesized (dmpe)U(CH(2)C(6)H(5))(4) (3-Ph), indicating the redox-innocent chelating phosphine stabilizes the uranium center in 3-Ph and prevents reductive elimination of bibenzyl. Full characterization for 3-Ph, including X-ray crystallography, is reported.     

A two-state computational investigation of methane C--H and ethane C--C oxidative addition to [CpM(PH3)]n+ (M = Co, Rh, Ir; n = 0, 1)

Reductive elimination of methane from methyl hydride half-sandwich phosphane complexes of the Group 9 metals has been investigated by DFT calculations on the model system [CpM(PH(3))(CH(3))(H)] (M = Co, Rh, Ir). For each metal, the unsaturated product has a triplet ground state; thus, spin crossover occurs during the reaction. All relevant stationary points on the two potential energy surfaces (PES) and the minimum energy crossing point (MECP) were optimized. Spin crossover occurs very near the sigma-CH(4) complex local minimum for the Co system, whereas the heavier Rh and Ir systems remain in the singlet state until the CH(4) molecule is almost completely expelled from the metal coordination sphere. No local sigma-CH(4) minimum was found for the Ir system. The energetic profiles agree with the nonexistence of the Co(III) methyl hydride complex and with the greater thermal stability of the Ir complex relative to the Rh complex. Reductive elimination of methane from the related oxidized complexes [CpM(PH(3))(CH(3))(H)](+) (M = Rh, Ir) proceeds entirely on the spin doublet PES, because the 15-electron [CpM(PH(3))](+) products have a doublet ground state. This process is thermodynamically favored by about 25 kcal mol(-1) relative to the corresponding neutral system. It is essentially barrierless for the Rh system and has a relatively small barrier (ca. 7.5 kcal mol(-1)) for the Ir system. In both cases, the reaction involves a sigma-CH(4) intermediate. Reductive elimination of ethane from [CpM(PH(3))(CH(3))(2)](+) (M = Rh, Ir) shows a similar thermodynamic profile, but is kinetically quite different from methane elimination from [CpM(PH(3))(CH(3))(H)](+): the reductive elimination barrier is much greater and does not involve a sigma-complex intermediate. The large difference in the calculated activation barriers (ca. 12.0 and ca. 30.5 kcal mol(-1) for the Rh and Ir systems, respectively) agrees with the experimental observation, for related systems, of oxidatively induced ethane elimination when M = Rh, whereas the related Ir systems prefer to decompose by alternative pathways.