Understanding mercapto ligand exchange on the surface of FePt nanoparticles

Tailoring the surface of nanoparticles is essential for biological applications of magnetic nanoparticles. FePt nanoparticles are interesting candidates owing to their high magnetic moment. Established procedures to make FePt nanoparticles use oleic acid and oleylamine as the surfactants, which make them dispersed in nonpolar solvents such as hexane. As a model study to demonstrate the modification of the surface chemistry, stable aqueous dispersions of FePt nanoparticles were synthesized after ligand exchange with mercaptoalkanoic acids. This report focuses on understanding the surface chemistry of FePt upon ligand exchange with mercapto compounds by conducting X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) studies. It was found that the mercapto end displaces oleylamine on the Pt atoms and the carboxylic acid end displaces the oleic acid on the Fe atoms, thus exposing carboxylate and thiolate groups on the surface that provide the necessary electrostatic repulsion to form stable aqueous dispersions of FePt nanoparticles.     

Single‐Crystalline and Near‐Monodispersed NaMF3 (M=Mn,Co, Ni,Mg) and LiMAlF6 (M=Ca,Sr) Nanocrystals from Cothermolysis of Multiple Trifluoroacetates in Solution

We report the synthesis of single‐crystalline and near‐monodispersed NaMF₃ (M=Mn, Co, Ni, Mg), LiMAlF₆ (M=Ca, Sr), and NaMgF₃:Yb,Er nanocrystals (quasisquare nanoplates, nanorods, and nanopolygons) by the cothermolysis of multiple trifluoroacetates in hot combined organic solvents (oleic acid, oleylamine, and 1‐octadecene). The nanocrystals were characterized by XRD, TEM, superconductive quantum interference device (SQUID), and upconversion luminescence spectroscopy. By regulating the polarity of the dispersant, the NaMF₃ (M=Mn, Co, Ni) nanoplates were partially aligned to form nanoarrays on copper TEM grids. The sizes of the NaMF₃ nanocrystals were easily tuned by the use of proper synthetic conditions such as reaction temperature and time and solvent composition. On the basis of a series of experiments in which the reaction conditions were varied, together with GC–MS and FTIR analysis, the reaction pathways for the formation of these nanocrystals from trifluoroacetate precursors were proposed. The magnetic measurements showed that the differently sized NaMnF₃ square plates displayed interesting weak ferromagnetic behavior on the nanometer scale. The strong red upconversion luminescence emitted from the NaMgF₃:Yb,Er nanorods under 980‐nm near‐IR laser excitation suggests that NaMgF₃ may be a good candidate host material for red upconversion luminescence.     

Synthesis of colloidal uranium-dioxide nanocrystals

In this paper, we have developed an organic-phase synthesis method for producing size-controlled, nearly monodispersed, colloidal uranium-dioxide nanocrystals. These UO2 nanocrystals are potentially important to applications such as nuclear fuel materials, catalysts, and thermopower materials. In addition, we have systematically mapped out the functions of the solvents (oleic acid, oleylamine, and 1-octadecene) in the synthesis, and we found that N-(cis-9-octadecenyl)oleamide-a product of the condensation of oleic acid and oleylamine-can substantially affect the formation of UO2 nanocrystals. Importantly, these results provide fundamental insight into the mechanisms of UO2 nanocrystal synthesis. Moreover, because a mixture of oleic acid and oleylamine has been widely used in synthesizing a variety of high-quality metal or metal-oxide nanocrystals, the results herein should also be important for understanding the detailed mechanisms of these syntheses.     

Size-controlled chalcopyrite CuInS2 nanocrystals: One-pot synthesis and optical characterization

Chalcopyrite ternary CuInS2 semiconductor nanocrystals have been synthesized via a facile one-pot chemical approach by using oleylamine and oleic acid as solvents.The as-prepared CuInS2 nanocrystals have been characterized by instrumental analyses such as X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS),transmission electron microscopy(TEM)/high-resolution TEM(HRTEM),energy-dispersive X-ray spectroscopy(EDS),UV-vis absorption spectroscopy(UV-vis) and photoluminescence(PL) spectroscopy.The particle sizes of the CuInS2 nanocrystals could be tuned from 2 to 10 nm by simply varying reaction conditions.Oleylamine,which acted as both a reductant and an effective capping agent,plays an important role in the size-controlled synthesis of CuInS2 nanocrystals.Based on a series of comparative experiments under different reaction conditions,the probable formation mechanism of CuInS2 nanocrystals has been proposed.Furthermore,the UV-vis absorption and PL emission spectra of the chalcopyrite CuInS2 nanocrystals have been found to be adjustable in the range of 527-815 nm and 625-800 nm,respectively,indicating their potential application in photovoltaic devices.     

Simple synthesis of Pd-Fe3O4 heterodimer nanocrystals and their application as a magnetically recyclable catalyst for Suzuki cross-coupling reactions

A simple gram-scale synthesis of Pd-Fe(3)O(4) heterodimer nanocrystals was achieved by controlled one-pot thermolysis of a mixture solution composed of iron acetylacetonate, palladium acetylacetonate, oleylamine, and oleic acid. The heterodimer nanocrystals are composed of a 6 nm-sized Pd nanosphere and a 30 nm-sized faceted Fe(3)O(4) nanocrystal and they are soft ferrimagnetic with high saturation magnetization value and low coercivity value. The heterodimer nanocrystals exhibited good activities for various Suzuki coupling reactions. Furthermore, the nanocrystal catalyst could be easily separated from the product mixture by using a magnet and could be recycled 10 times without losing catalytic activity.     

Fe3O4 nanocrystals with novel fractal

Fe3O4 novel fractal nanocrystals have been synthesized by a surfactant-assisted solvothermal process for the first time. X-ray diffraction (XRD), X-ray photoelectron spectra (XPS), M?ssbauer spectroscopy (MS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM) have been used to investigate the novel fractal nanocrystals. The lengths of the fractals are about 2-3 microm, and the trunks and branches of Fe3O4 fractals have almost the same diameters of ca. 30-50 nm. The roles of surfactant PEG-20000 and N2H4 have been discussed in detail. One key fact has been found that the ferrocene concentration has a vital effect on the morphologies of the products. The side-branching process and the oscillation of the concentration have been proposed to illustrate the formation mechanisms of the fractal nanocrystals. In addition, magnetic properties of Fe3O4 fractal nanocrystals have also been detected by a vibrating sample magnetometer, showing relatively high saturation magnetization (Ms) of ca. 78.75 emu/g.     

Structure and morphology of spinel MFe2O4 (M=Fe, Co, Ni) nanoparticles chemically synthesized from heterometallic complexes

We synthesized magnetic spinel ferrites from trimetallic single-source precursors. Fe(II), Co(II), and Ni(II) ferrite nanoparticles in the range of 9-25 nm were synthesized by solvothermal decomposition of trimetallic acetate complex precursors in benzyl ether in the presence of oleic acid and oleylamine, using 1,2-dodecanediol as the reducing agent. For comparison, spinel ferrite nanoparticles were synthesized by stoichiometric mixtures of metal acetate or acetylacetonate salts. The nanoparticles (NP) were characterized by TEM, DLS, powder XRD, and Raman spectroscopy; and their magnetic properties were characterized by ZFC-FC and M(H) measurements. The ferrite-NP were more homogeneous and had a narrower size distribution when trimetallic complexes were used as precursors. As a consequence, the magnetic properties of these ferrite-NP are closer to the aimed room temperature superparamagnetic behavior, than are those of other ferrites obtained by a mixture of salts.     

Monodisperse superparamagnetic nanoparticles by thermolysis of Fe(III) oleate and mandelate complexes

Monodisperse superparamagnetic iron oxide nanoparticles of controlled size were synthesized by thermal decomposition of organic iron compounds in different high-boiling solvents in the presence of oleic acid and/or oleylamine. The compounds included Fe(III) oleate and mandelate, formed from FeCl₃ and the respective acids. The size of the nanoparticles was easily tuned to 8–27 nm by varying the experimental conditions. The nanoparticles were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), and magnetization measurements. The hydrophobic coating of the particles was analyzed by thermogravimetric analysis (TGA) and atomic absorption spectroscopy (AAS). To make the particles biocompatible and water dispersible, nontoxic hydrophilic poly(ethylene glycol) derivatives were synthesized and used for phase transfer of hydrophobic particles into water using a ligand-exchange procedure.     

Ternary cobalt-iron phosphide nanocrystals with controlled compositions, properties, and morphologies from nanorods and nanorice to split nanostructures

Structural phase-controlled formation of binary Co(2)P and CoP nanocrystals is achieved by reacting cobalt(II) oleate with trioctylphosphine. In the absence of oleylamine, Co(2)P nanowires are formed at both 290 and 320 °C. In the presence of oleylamine, Co(2)P nanorods are formed at 290 °C, and CoP nanorods are formed at 320 °C. With the simultaneous reaction of iron(III) oleate and cobalt(II) oleate with trioctylphosphine in the presence of oleylamine, ternary Co(2)P-type cobalt-iron phosphide nanostructures are produced at both 290 and 320 °C, corresponding to rice-shaped Co(1.5)Fe(0.5)P nanorods and split Co(1.7)Fe(0.3)P nanostructures, respectively. The controlled incorporation of iron into cobalt phosphide can alter the magnetic properties from paramagnetic binary Co(2)P to ferromagnetic Co(2)P-type ternary cobalt-iron phosphide nanostructures. Meanwhile, the time-dependent morphological evolution from small nanodots/nanorods, through seeded growth to unique split nanostructures is demonstrated in one-pot reaction at 320 °C.     

Aging investigation of cobalt ferrite nanoparticles in low pH magnetic fluid

In this study, we report on how surface-passivated and nonpassivated cobalt ferrite nanoparticles (8 nm diameter), suspended as ionic magnetic fluids and aged under low pH conditions, revealed different behavior as far as the time evolution of the iron/cobalt cation distribution, crystal quality, coercivity, and saturation magnetization are concerned. Different techniques were used to perform a detailed study regarding the chemical stability, structural stability, and surface and magnetic properties of the suspended nanoparticles as a function of the aging time. Properties of surface-passivated and nonpassivated nanoparticles were investigated by transmission electron microscopy, X-ray diffraction, atomic absorption spectrometry, magnetic measurements, Raman spectroscopy, and M?ssbauer spectroscopy. Our data showed that the employed nanoparticle surface passivation process, besides the formation of an iron-rich surface layer, modifies the nanoparticle core as well, improving the crystal quality while modifying the Fe/Co cation distribution and the nanoparticle dissolution rate profile. Magnetic data showed that the saturation magnetization increases for surface-passivated nanoparticles in comparison to the nonpassivated ones, though coercivity decreases after passivation. These two observations were associated to changes in the cation distribution among the available tetrahedral and octahedral sites.     

单分散铁氧体纳米颗粒的生长机制与成分偏聚的透射电子显微研究

理解纳米晶的生长机制对单分散纳米晶的可控合成至关重要。本文以热分解法制备的双金属铁氧体(钴铁氧和锰铁氧)纳米颗粒为例,利用透射电子显微镜(TEM)系统研究了铁氧体纳米晶的生长机制,揭示了由此造成的成分偏聚现象。对不同时间阶段的反应产物的分析结果表明,两步加热法(即先后在相对低的温度和相对高的温度下加热反应)是制备高质量的单分散铁氧体纳米晶的关键;通过控制低温反应阶段的时间可实现纳米晶的形核阶段和生长阶段的有效分离,从而有利于单分散纳米晶的合成。利用扫描透射电子显微镜(STEM)及电子能量损失谱(EELS)谱学成像技术分析,我们进一步发现了双金属铁氧体纳米晶中的成分偏聚现象,表明双金属铁氧体纳米晶在形核阶段主要形成富Fe的核芯,而在生长阶段则形成更富Co/Mn的双金属铁氧体壳层。这些结果对制备高质量的单分散铁氧体纳米晶具有重要的指导意义,同时也有助于正确理解热分解法制备的铁氧体纳米晶的表面成分和相关表面物理化学性质。     

X型六角晶系钡铁氧体纳米晶的制备和表征

用硬脂酸凝胶法制备了Co₂-X型六角晶系钡铁氧体纳米晶,在750℃热处理得到的纳米晶形貌为球形,粒径范围为15～25nm.随着热处理温度的升高,粒子逐渐长大并呈块状.振荡样品磁强计测试结果表明,Co₂-X型六角晶系钡铁氧体纳米晶具有与常规体材料不同的磁性能,其比饱和磁化强度σ_s低于后者.产物的矫顽力、比饱和磁化强度随粒子的长大呈规律性的变化.     

镝掺杂铁氧体纳米晶的制备、表征和磁性

采用化学共沉淀法制备出了镝掺杂铁氧体纳米晶, 利用透射电子显微镜(TEM)、X射线衍射仪(XRD)、傅立叶红外光谱仪(FTIR)、古埃磁天平、振动样品磁强计(VSM)、X射线能谱仪(EDX)等仪器对产物进行了表征, 研究了Dy^3＋掺杂量对铁氧体纳米晶的结构、磁性和粒度的影响. 结果表明: 适量稀土元素镝离子的掺杂可以提高尖晶石型铁氧体的磁性、降低矫顽力, 当n(Fe^3＋)∶n(Dy^3＋)＝14∶1时其磁性最强. Dy^3＋替代或充填进入了尖晶石晶格, 且主要占据B位. 掺杂了镝的铁氧体磁性纳米粒子粒度变小, 且分布更集中、均匀, 当Dy^3＋加入量为n(Fe^3＋)∶n(Dy^3＋)＝14∶1时铁氧体纳米粒子的平均粒径由掺杂前的14 nm降低到到8 nm. 这种具有超顺磁性的软磁铁氧体纳米晶可应用于纳米磁液领域.     

Effect of surface modification on magnetization of iron oxide nanoparticle colloids

Magnetic iron oxide nanoparticles have numerous applications in the biomedical field, some more mature, such as contrast agents in magnetic resonance imaging (MRI), and some emerging, such as heating agents in hyperthermia for cancer therapy. In all of these applications, the magnetic particles are coated with surfactants and polymers to enhance biocompatibility, prevent agglomeration, and add functionality. However, the coatings may interact with the surface atoms of the magnetic core and form a magnetically disordered layer, reducing the total amount of the magnetic phase, which is the key parameter in many applications. In the current study, amine and carboxyl functionalized and bare iron oxide nanoparticles, all suspended in water, were purchased and characterized. The presence of the coatings in commercial samples was verified with X-ray photoelectron spectroscopy (XPS). The class of iron oxide (magnetite) was verified via Raman spectroscopy and X-ray diffraction. In addition to these, in-house prepared iron oxide nanoparticles coated with oleic acid and suspended in heptane and hexane were also investigated. The saturation magnetization obtained from vibrating sample magnetometry (VSM) measurements was used to determine the effective concentration of magnetic phase in all samples. The Tiron chelation test was then utilized to check the real concentration of the iron oxide in the suspension. The difference between the concentration results from VSM and the Tiron test confirmed the reduction of magnetic phase of magnetic core in the presence of coatings and different suspension media. For the biocompatible coatings, the largest reduction was experienced by amine particles, where the ratio of the effective weight of magnetic phase reported to the real weight was 0.5. Carboxyl-coated samples experienced smaller reduction with a ratio of 0.64. Uncoated sample also exhibits a reduction with a ratio of 0.6. Oleic acid covered samples show a solvent-depended reduction with a ratio of 0.5 in heptane and 0.4 in hexane. The corresponding effective thickness of the nonmagnetic layer between magnetic core and surface coating was calculated by fitting experimentally measured magnetization to the modified Langevin equation.     

Controlled synthesis of different types iron oxides nanocrystals in paraffin oil

Monodisperse Fe3O4 and FeO nanocrystals (NCs) with different sizes (from 10 nm to 50 nm) and different shapes (cube, sphere, and ellipsoid) were synthesized by simply adjusting reaction temperature or molar ratio of Fe/oleic acid (OA) during the decomposition of FeO(OH) in noncoordinating solvent. The concentration of OA affected the nucleation and growth of NCs by improving the chemical reaction driving force during the syntheses of different types of iron oxide NCs. It has been found that the reaction temperature influenced the reaction activity between FeO(OH) and OA. The structure of Fe oleate complexes was studied using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Raman spectroscopy, and transmission electron microscopy (TEM) were used for structural and chemical characterization of as-prepared iron oxide NCs.     

Thermal decomposition of [bis(salicylaldehydato)cadmium(II)] to CdS nanocrystals

The present investigation reports, the novel synthesis of nanocrystals CdS using thermal decomposition of [bis(salicylaldehydato)cadmium(II)], as a new precursor, and elemental sulfur in oleylamine. The as-synthesized CdS crystals have diameters about 10 nm. The products were characterized by X-ray diffraction (XRD) transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), ultraviolet–visible (UV–Vis) spectroscopy and Fourier transformed infrared (FT-IR) spectra. The results of this paper show that the shape and size of cadmium sulfide nanocrystals can be controlled systematically by adjusting certain reaction parameters, such as the reactant concentration, the reaction temperature and the reaction time. Cadmium sulfide nanoparticles and nanorods with different lengths have been successfully prepared.     

Inorganic nanocrystal self-assembly via the inclusion interaction of beta-cyclodextrins: toward 3D spherical magnetite

Synthesis and three-dimensional (3D) assembly of magnetite nanocrystals were realized by a one-pot procedure, in which Fe(acac)3 (acac = acetylacetonate) was partly reduced by hydrazine accompanied with ethylene glycol and spontaneously assembled into spherical nanostructures in the presence of surfactants including beta-cyclodextrin, oleic acid, and oleylamine. The size of the assembled spheres can coarsely be controlled in a limited range (100 nm to 2 microm) by changing the reaction temperature and the concentration of beta-cyclodextrin. X-ray diffraction and far Fourier transform infrared spectroscopy were employed to clarify the structures of magnetite in the assembled spheres. Electron diffraction pattern in a selected-area exhibits a high-crystallinity characteristic of cubic structure magnetite. We found that the formation of spherical magnetite aggregates highly depends on the presence of beta-cyclodextrin, while oleic acid and oleylamine improve the morphology of individual magnetite nanoparticles in the assembled spheres. In addition, the thermal gravimetric analysis and differential thermal analysis were applied to determine the content of magnetite in the products. Magnetic properties were also studied by using a superconducting quantum interference device magnetometer.     

Shape control and associated magnetic properties of spinel cobalt ferrite nanocrystals

By combining nonhydrolytic reaction with seed-mediated growth, high-quality and monodisperse spinel cobalt ferrite, CoFe(2)O(4), nanocrystals can be synthesized with a highly controllable shape of nearly spherical or almost perfectly cubic. The shape of the nanocrystals can also be reversibly interchanged between spherical and cubic morphology through controlling nanocrystal growth rate. Furthermore, the magnetic studies show that the blocking temperature, saturation, and remanent magnetization of nanocrystals are solely determined by the size regardless the spherical or cubic shape. However, the shape of the nanocrystals is a dominating factor for the coercivity of nanocrystals due to the effect of surface anisotropy. Such magnetic nanocrystals with distinct shapes possess tremendous potentials in fundamental understanding of magnetism and in technological applications of magnetic nanocrystals for high-density information storage.     

Surface modification of magnetic nanoparticles capped by oleic acids: characterization and colloidal stability in polar solvents

The lyophobic surface of monodisperse magnetic nanoparticles capped by oleic acid was made to be more lyophilic by ozonolysis to increase the stability of the suspension in polar solvents like ethanol. The ozone oxidatively cleaved the double bond of oleic acid to form carbonyl and carboxyl groups on the surface of the nanoparticles. Additionally, interfacial ligand exchange of the capping molecules was applied to make the hydrophobic particle surface more hydrophilic. The magnetic particles showed enhanced miscibility and short-term stability in water after interfacial ligand exchange. The structure changes of the capping molecules on the nanoparticle surfaces were investigated using Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS). From these spectroscopy studies, the cleavage of the oleic acid and the formations of the carboxyl and carbonyl groups on the particle surface were confirmed. The shape and the magnetic properties of the nanoparticles were maintained after the surface modification. Ozonolysis is an effective method in modifying the lyophobic surface of the magnetic nanoparticles.     

FePc结构对Pd(OAc)2/HQ/FePc催化环己烯氧化活性的影响

在乙腈酸性水溶液中,不同来源酞菁铁(FePc)和Pd(OAc)2/HQ（氢醌）组成的催化体系在环己烯氧化反应中有明显不同的催化活性.通过IR、Mssbauer、XPS、XRD、SEM、BET等技术对酞菁铁的分析表明,由酞菁铁组成的多组份催化体系的催化活性与酞菁铁中的飒 氧酞菁铁含量、酞菁铁结晶度和表面形态有关.