Progress in adsorption-based CO2 capture by metal-organic frameworks

Metal-organic frameworks (MOFs) have recently attracted intense research interest because of their permanent porous structures, large surface areas, and potential applications as novel adsorbents. The recent progress in adsorption-based CO(2) capture by MOFs is reviewed and summarized in this critical review. CO(2) adsorption in MOFs has been divided into two sections, adsorption at high pressures and selective adsorption at approximate atmospheric pressures. Keys to CO(2) adsorption in MOFs at high pressures and low pressures are summarized to be pore volumes of MOFs, and heats of adsorption, respectively. Many MOFs have high CO(2) selectivities over N(2) and CH(4). Water effects on CO(2) adsorption in MOFs are presented and compared with benchmark zeolites. In addition, strategies appeared in the literature to enhance CO(2) adsorption capacities and/or selectivities in MOFs have been summarized into three main categories, catenation and interpenetration, chemical bonding enhancement, and electrostatic force involvement. Besides the advantages, two main challenges of using MOFs in CO(2) capture, the cost of synthesis and the stability toward water vapor, have been analyzed and possible solutions and path forward have been proposed to address the two challenges as well (150 references).     

Ligand-assisted enhancement of CO2 capture in metal-organic frameworks

Using density functional theory with a van der Waals-corrected functional, we elucidate how CO(2) binds to a novel "BTT-type" metal-organic framework (MOF) featuring open metal centers. We show that CO(2) binds most favorably to open metal cation sites, but with an adsorption energy that can be three times more sensitive to the choice of the bridging ligand than to metal cation choice. A strong, three-site interaction between CO(2) and the open-metal site is predicted, with the binding energy enhanced by up to a factor of 2, depending on the ligand. The CO(2)-MOF binding can be attributed to a combination of electrostatics and vdW dispersive interactions, both of which are critically sensitive to the local environment, and both of which contribute nearly equally to the overall binding strength. We show that a judicious choice of the organic linker and the metal center allows the binding energy to be tuned from 34.8 kJ/mol (for CaBTTri) to a maximum of 64.5 kJ/mol (MgBTT).     

CO2 capture by metal-organic frameworks with van der Waals density functionals

We use density functional theory calculations with van der Waals corrections to study the role of dispersive interactions on the structure and binding of CO(2) within two distinct metal-organic frameworks (MOFs): Mg-MOF74 and Ca-BTT. For both classes of MOFs, we report calculations with standard gradient-corrected (PBE) and five van der Waals density functionals (vdW-DFs), also comparing with semiempirical pairwise corrections. The vdW-DFs explored here yield a large spread in CO(2)-MOF binding energies, about 50% (around 20 kJ/mol), depending on the choice of exchange functional, which is significantly larger than our computed zero-point energies and thermal contributions (around 5 kJ/mol). However, two specific vdW-DFs result in excellent agreement with experiments within a few kilojoules per mole, at a reduced computational cost compared to quantum chemistry or many-body approaches. For Mg-MOF74, PBE underestimates adsorption enthalpies by about 50%, but enthalpies computed with vdW-DF, PBE+D2, and vdW-DF2 (40.5, 38.5, and 37.4 kJ/mol, respectively) compare extremely well with the experimental value of 40 kJ/mol. vdW-DF and vdW-DF2 CO(2)-MOF bond lengths are in the best agreement with experiments, while vdW-C09(x) results in the best agreement with lattice parameters. On the basis of the similar behavior of the reduced density gradients around CO(2) for the two MOFs studied, comparable results can be expected for CO(2) adsorption in BTT-type MOFs. Our work demonstrates for this broad class of molecular adsorbate-periodic MOF systems that parameter-free and computationally efficient vdW-DF and vdW-DF2 approaches can predict adsorption enthalpies with chemical accuracy.     

High uptakes of CO2 and CH4 in mesoporous metal-organic frameworks MIL-100 and MIL-101

Mesoporous MOFs MIL-100 and MIL-101 adsorb huge amounts of CO2 and CH4. Characterization was performed using both manometry and gravimetry in different laboratories for isotherms coupled with microcalorimetry and FTIR to specify the gas-solid interactions. In particular, the uptake of carbon dioxide in MIL-101 has been shown to occur with a record capacity of 40 mmol g(-1) or 390 cm3STP cm(-3) at 5 MPa and 303 K.     

配位竞争策略制备的两个镁基金属有机骨架及其选择性CO2捕集

利用配位竞争策略制备了2个镁基金属有机骨架(MOFs)。在酸性条件下,镁离子与N,N-二甲基甲酰胺(DMF)热分解产生的甲酸原位反应得到三维甲酸镁MOF:[Mg₃(HCO₂)₆]·DMF(1)。在相同条件下,当加入竞争配体1,1′∶3′,1″-三联苯-3,3″,5,5″-四甲酸(H₄L)后,甲酸不再参与配位,得到新的三维镁基MOF:[Mg₂(L)(H₂O)₃]·2H₂O·2CH₃CN·DMF(2)。单晶X射线分析表明,MOF 1具有[Mg₄@Mg2]四面体建筑块,它们形成dia拓扑网络并有一个孔径为0.44 nm的一维孔道。而MOF 2具有独特的[Mg₂]双核簇,与4-连接配体L^4-配位后,形成sra拓扑网络且沿a轴方向存在一个哑铃型孔道,长度为1.42 nm。气体吸附研究发现1具有微孔结构,其表面积为342 m^2<...     

两个配位竞争策略制备的镁基金属有机骨架及其选择性CO2捕集

利用配位竞争策略制备了2个镁基金属有机骨架(MOFs)。在酸性条件下,镁离子与N,N-二甲基甲酰胺(DMF)热分解产生的甲酸原位反应得到三维甲酸镁 MOF：[Mg₃(HCO₂)₆]·DMF (1)。在相同条件下,当加入竞争配体 1,1′∶3′,1″-三联苯-3,3″,5,5″-四甲酸(H₄L)后,甲酸不再参与配位,得到新的三维镁基MOF：[Mg₂(L)(H₂O)₃]·2 H₂O·2CH₃CN·DMF (2)。单晶X射线分析表明,MOF 1具有[Mg₄@Mg2]四面体建筑块,它们形成dia拓扑网络并有一个孔径为0.44 nm的一维孔道。而MOF 2具有独特的[Mg₂]双核簇,与4-连接配体L^4-配位后,形成sra拓扑网络且沿a轴方向存在一个哑铃型孔道,长度为1.42 nm。气体吸附研究发现1具有微孔结构,其表面积为342 m²·g^-1,但2不能保持原有多孔特征。此外,1具有良好的水稳定性且在低压下展现快速吸收的Ⅰ型 CO₂吸附等温线,在 298 K和 2 000 kPa下吸附量达到样品重量的 14.5%。理想吸附溶液理论和吸附热计算表明 1具有良好的选择性CO₂/CH₄捕获能力。     

Functional mesoporous metal-organic frameworks for the capture of heavy metal ions and size-selective catalysis

By using Zn(4)O(CO(2))(6) as secondary building units (SBUs) and two extended ligands containing amino functional groups, TATAB and BTATB (TATAB = 4,4',4'-s-triazine-1,3,5-triyltri-p-aminobenzoate and BTATB = 4,4',4'-(benzene-1,3,5-triyltris(azanediyl))tribenzoate), two isostructural mesoporous metal-organic frameworks (MOFs) with cavities up to 2.73 nm, designated as PCN-100 and PCN-101 (PCN represents porous coordination network), have been synthesized. N(2) sorption isotherms of both PCN-100 and -101 showed typical type IV behavior, indicating their mesoporous nature. The TATAB ligand that comprises PCN-100 was employed to capture heavy metal ions (Cd(II) and Hg(II)) by constructing complexes within the pores with a possible coordination mode similar to that found in aminopyridinato complexes. This reveals that mesoporous materials such as PCN-100 can be applied in the elimination of heavy metal ions from waste liquid. In addition, both PCNs-100 and -101 exhibit size-selective catalytic activity toward the Knoevenagel condensation reaction.     

Carborane-based metal-organic frameworks as highly selective sorbents for CO(2) over methane

Separation of CO(2)/CH(4) mixtures was studied in carborane-based metal-organic framework materials with and without coordinatively unsaturated metal sites; high selectivities for CO(2) over CH(4) ( approximately 17) are obtained, especially in the material with open metal sites.     

Cooperative template-directed assembly of mesoporous metal-organic frameworks

Despite great efforts, the development of a reliable way to assemble mesoporous metal-organic frameworks (mesoMOFs) remains a challenge. In this work, we have designed a cooperative template system, comprising a surfactant (cetyltrimethylammonium bromide) and a chelating agent (citric acid), for the generation of a mesoMOF containing a hierarchical system of mesopores interconnected with microspores. The surfactant molecules form micelles and the chelating agent bridges the MOF and the micelles, making self-assembly and crystal growth proceed under the direction of the cooperative template. However, when the surfactant or the chelating agent was applied individually, no mesoMOF was obtained.     

Anion separation by selective crystallization of metal-organic frameworks

A novel approach for the separation of anions from aqueous mixtures was demonstrated, which involves their selective crystallization with metal-organic frameworks (MOFs) containing urea functional groups. Self-assembly of Zn2+ with the N,N'-bis(m-pyridyl)urea (BPU) linker results in the formation of one-dimensional MOFs including various anions for charge balance, which interact to different extents with the zinc nodes and the urea hydrogen-bonding groups, depending on their coordinating abilities. Thus, Cl-, Br-, I-, and SO4(2-), in the presence of BPU and Zn2+, form MOFs from water, in which the anions coordinate the zinc and are hydrogen-bonded to the urea groups, whereas NO3- and ClO4- anions either do not form MOFs or form water-soluble discrete coordination complexes under the same conditions. X-ray diffraction, FTIR, and elemental analysis of the coordination polymers precipitated from aqueous mixtures containing equivalent amounts of these anions indicated total exclusion of the oxoanions and selective crystallization of the halides in the form of solid solutions with the general composition ZnCl(x)Br(y)I(z).BPU (x + y + z = 2), with an anti-Hofmeister selectivity. The concomitant inclusion of the halides in the same structural frameworks facilitates the rationalization of the observed selectivity on the basis of the diminishing interactions with the zinc and urea acidic centers in the MOFs when going from Cl- to I-, which correlates with decreasing anionic charge density in the same order. The overall crystal packing efficiency of the coordination frameworks, which ultimately determines their solubility, also plays an important role in the anion crystallization selectivity under thermodynamic equilibration.     

Enhanced CO2 binding affinity of a high-uptake rht-type metal-organic framework decorated with acylamide groups

An rht-type metal-organic framework (MOF) prepared from M(2)(carboxylate)(4) (M = Cu, Co) paddlewheel clusters and a flexible C(3)-symmetric hexacarboxylate ligand with acylamide groups exhibits larger CO(2) uptake, an enhanced heat of adsorption, and higher selectivity toward CO(2)/N(2) in comparison with what was previously observed for an analogous MOF with alkyne groups.     

Molecular screening of metal-organic frameworks for CO2 storage

We report a molecular simulation study for CO2 storage in metal-organic frameworks (MOFs). As compared to the aluminum-free and cation-exchanged ZSM-5 zeolites and carbon nanotube bundle, IRMOF1 exhibits remarkably higher capacity. Incorporation of Na(+) cations into zeolite increases the capacity only at low pressures. By variation of the metal oxide, organic linker, functional group, and framework topology, a series of isoreticular MOFs (IRMOF1, Mg-IRMOF1, Be-IRMOF1, IRMOF1-(NH2)4, IRMOF10, IRMOF13, and IRMOF14) are systematically examined, as well as UMCM-1, a fluorous MOF (F-MOF1), and a covalent-organic framework (COF102). The affinity with CO2 is enhanced by addition of a functional group, and the constricted pore is formed by interpenetration of the framework; both lead to a larger isosteric heat and Henry's constant and subsequently a stronger adsorption at low pressures. The organic linker plays a critical role in tuning the free volume and accessible surface area and largely determines CO2 adsorption at high pressures. As a combination of high capacity and low framework density, IRMOF10, IRMOF14, and UMCM-1 are identified from this study to be the best for CO2 storage, even surpass the experimentally reported highest capacity in MOF-177. COF102 is a promising candidate with high capacity at considerably low pressures. Both gravimetric and volumetric capacities at 30 bar correlate well with the framework density, free volume, porosity, and accessible surface area. These structure-function correlations are useful for a priori prediction of CO2 capacity and for the rational screening of MOFs toward high-efficacy CO2 storage.     

Copper-based metal-organic frameworks for electrochemical reduction of CO2

The electrochemical CO₂ reduction reaction (CO₂ER) is an emerging process that involves utilizing CO₂ to produce valuable chemicals and fuels by consuming excess electricity from renewable sources. Recently, Cu and Cu-based nanoparticles, as earth-abundant and economical metal sources, have been attracting significant interest. The chemical and physical properties of Cu-based nanoparticles are modified by different strategies, and CO₂ can be converted into multicarbon products. Among various Cu-based nanoparticles, Cu-based metal-organic frameworks (MOFs) are gaining increasing interest in the field of catalysis because of their textural, topological, and electrocatalytic properties. In this minireview, we summarized and highlighted the main achievements in the research on Cu-based MOFs and their advantages in the CO₂ER as electrocatalysts, supports, or precursors.     

CH(4) storage and CO(2) capture in highly porous zirconium oxide based metal-organic frameworks

A series of porous Zr oxoclusters-based MOFs was computationally explored for their gas storage/capture performances. The highly porous UiO-67(Zr) and UiO-68(Zr) solids show exceptionally high CH(4) and CO(2) adsorption capacities under operating conditions that make these thermal, water and mechanical resistant materials very promising for physisorption-based processes.     

A flexible metal-organic framework with double interpenetration for highly selective CO2 capture at room temperature

A flexible metal-organic framework of 1a Cu(FMA)(4,4'-Bpe)0.5(FMA=fumarate; 4,4'-Bpe=trans-bis-(4-pyridyl)ethylene) that exhibits guest molecule-controlled gate-opening adsorption has been reported, in which the flexible pores can be enlarged by CO_2 molecules rather than CH_4 and N_2 under a certain gate-opening pressure. The CO_2 uptake can be sharply improved from 6.85cm~3 g~(–1) at 0.60 atm to 33.7 cm~3 g~(–1) at 1 atm due to the gate-opening effect, thus resulting in the notably enhanced adsorption selectivities for CO_2/CH_4(32:1, v/v) and CO_2/N_2(48:1, v/v) separations at room temperature.     

Evaluation of the impact of H2O, O2, and SO2 on postcombustion CO2 capture in metal-organic frameworks

Molecular modeling methods are used to estimate the influence of impurity species: water, O(2), and SO(2) in flue gas mixtures present in postcombustion CO(2) capture using a metal organic framework, HKUST-1, as a model sorbent material. Coordinated and uncoordinated water effects on CO(2) capture are analyzed. Increase of CO(2) adsorption is observed for both cases, which can be attributed to the enhanced binding energy between CO(2) and HKUST-1 due to the introduction of a small amount of water. Density functional theory calculations indicate that the binding energy between CO(2) and HKUST-1 with coordinated water is ~1 kcal/mol higher than that without coordinated water. It is found that the improvement of CO(2)/N(2) selectivity induced by coordinated water may mainly be attributed to the increased CO(2) adsorption on the hydrated HKUST-1. On the other hand, the enhanced selectivity induced by uncoordinated water in the flue gas mixture can be explained on the basis of the competition of adsorption sites between water and CO(2) (N(2)). At low pressures, a significant CO(2)/N(2) selectivity increase is due to the increase of CO(2) adsorption and decrease of N(2) adsorption as a consequence of competition of adsorption sites between water and N(2). However, with more water molecules adsorbed at higher pressures, the competition between water and CO(2) leads to the decrease of CO(2) adsorption capacity. Therefore, high pressure operation should be avoided in HKUST-1 sorbents for CO(2) capture. In addition, the effects of O(2) and SO(2) on CO(2) capture in HKUST-1 are investigated: The CO(2)/N(2) selectivity does not change much even with relatively high concentrations of O(2) in the flue gas (up to 8%). A slightly lower CO(2)/N(2) selectivity of a CO(2)/N(2)/H(2)O/SO(2) mixture is observed compared with that in a CO(2)/N(2)/H(2)O mixture, especially at high pressures, due to the strong SO(2) binding with HKUST-1.