十二烷基硫酸钠对原位晶化制备小晶粒NaY的影响

研究了十二烷基硫酸钠对原位晶化制备小晶粒NaY的影响,并以包含小晶粒NaY的原位晶化产物为母体,通过铵交换和稀土离子交换制备出了REUSY催化剂.采用X射线衍射(XRD)、扫描电镜(SEM)、X射线荧光(XRF)及N₂物理吸附-脱附等手段对样品进行了表征,采用微反活性评价装置和小型固定流化床(ACE)评价了所制备催化剂在重油催化裂化反应中的催化性能.结果表明:在原位晶化合成NaY的体系中,添加高岭土微球质量5%的十二烷基硫酸钠,可以将分子筛的平均晶粒尺寸由540 nm减小到250 nm.相比于常规的原位晶化型流化催化裂化(FCC)催化剂,以包含小晶粒NaY的原位晶化产物为母体所制备出的催化剂,在反应原料的转化率、裂化产物的选择性以及抗积碳性能等方面均有明显的提高或改善.     

A general strategy to quantify analytes through fluorescence chromaticity and luminosity

To realize a fast, easy-operation and precise way using fluorescence probes to quantify analytes is a goal to facilitate detection, especially in situ. Herein, we are reporting an approach which can be generally employed for the differentiation and quantitation of analytes through fluorescence chromaticity and luminosity. Seven representative fluorescent probes, targeting pH, cysteine, hydrogen sulfide, hydrogen peroxide, palladium and hydrazine, were synthesized and tested. Without utilizing costly instrumentations, portable devices were employed to collect data of photographs from the fluorescence samples in responses to different analytes. Subsequently, the photographic images were digitally processed to generate calibration curves between chromaticity/luminosity verse concentrations after mapping to the CIE 1931 xyY standard color space. Good linear calibration curves and quantitative analysis of unknown samples with low errors through the spectral technology demonstrated the reliability of this method. Thus, we showed the analytical method with a simple and on-site constructible/portable device which is promising for applications in more fluorescence probes.     

细胞内源性分子辅助荧光信号放大策略及细胞成像

细胞内原位信号放大策略是检测低丰度内源性目标物的有效手段, 但多数信号放大策略依赖于外源性辅助物, 不可避免地改变细胞内微环境, 进而对机体造成一定干扰. 针对此问题, 可利用细胞内源性物质(如金属离子、 核酸、 蛋白酶等)实现原位荧光信号放大, 对不同生物标志物进行荧光成像, 此方法对低丰度靶分子检测及成像具有重要意义. 本文对内源性物质辅助信号放大及细胞内荧光成像相关研究进行了归纳整理, 介绍了内源性核酸、 酶、 蛋白质、 三磷酸腺苷(ATP)和金属离子辅助信号放大策略, 并探讨了其信号放大机理; 总结了内源性物质辅助信号放大探针在低丰度物质检测及成像方面的研究进展; 最后展望了该策略在细胞成像方面的优势及应用前景.     

原位限域生长策略制备有序介孔碳负载的超小MoO3纳米颗粒

采用原位限域生长策略制备了一系列有序介孔碳负载的超小MoO₃纳米颗粒复合物(OMC-US-MoO₃). 其中, 有序介孔碳被用作基质来原位限域MoO₃纳米晶的生长. 依此方法制备的MoO₃纳米晶具有超小的晶粒尺寸(<5 nm), 并在介孔碳骨架内具有良好的分散度. 制得的OMC-US-MoO₃复合物具有可调的比表面积(428~796 m²/g)、 孔容(0.27~0.62 cm³/g)、 MoO₃质量分数(4%~27%)和孔径(4.6~5.7 nm). 当MoO₃纳米晶的质量分数为7%时, 所得样品OMC-US-MoO₃-7具有最大的孔径、 最小的孔壁厚度和最规整的介观结构. 该样品作为催化剂时, 表现出优异的环辛烯选择性氧化性能.     

Pretilt angle generation by UV exposure during imidization of polyimide

We investigated pretilt angle generation and liquid crystal (LC) alignment by ultraviolet exposure during the imidization of polyimide (PI). The generated pretilt angle of a nematic (N) LC using an in situ photo-alignment method is smaller than that using a conventional photo-alignment method on a surface of PI having side chains. The NLC pretilt angles using an in situ photo-alignment method injected at isotropic phase increased with annealing were observed.     

Pyrolysis Process of Plant Fibers北大核心CSCD

The natural plant fiber has a large molecular weight and complex structure and composition,and its thermal cracking products and the composition distribution are also more complex. The fast pyrolysiscomprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry（Py-GC×GC-TOF/MS）,thermogravimetry-Fourier transform infrared spectroscopy（TG-FT-IR）,and in situ Fourier transform infrared spectroscopy（in situ FT-IR）methods were used to study the thermal pyrolysis process of six different natural fibers. The distribution of thermal pyrolysis products of different fibers under different pyrolysis temperatures was investigated and the product form was fully discussed. The research results show that the products of fiber pyrolysis mainly include alcohols,aldehydes,ketones,acids,esters,hydrocarbons, dehydrated sugars and CO2,etc. The types of pyrolysis products of different natural plant fibers are obviously different,and the main product types obtained are all different. At the same time,the results of in situ infrared spectroscopy and mass spectrometry show that pyrolysis products are closely related to the pyrolysis temperature. The results of in situ infrared experiments show that when the pyrolysis temperature is lower than 100 °C,the adsorbed water on the surface of the fiber structure is desorbed,but the fiber structure does not change significantly. When the pyrolysis temperature range is 100~200 °C,the temperature has little effect toward the pyrolysis process. When the temperature exceeds 300 °C,the fiber pyrolysis reaction intensifies and the surface structure changes significantly,and the main products are aldehydes and ketones. © 2022, Science Press (China). All rights reserved.     

用于镁硫电池的原位生长NiS的泡沫镍正极集流体

采用原位生长NiS的泡沫镍NiS@Ni(NNF)和铜箔分别作为硫@微孔碳(S@MC)正极材料的集流体, 0.4 mol/L(PhMgCl)₂-AlCl₃+1.0 mol/L LiCl “二代镁锂混合”作为电解液, 测试了镁硫电池恒电流和不同倍率下的充放电性能, 分析了2种不同的集流体在涂覆相同正极材料下对镁硫电池性能影响的原因. 研究发现, 采用铜箔集流体的镁硫电池循环后正极极片上观察到明显的裂缝, 镁负极表面有分布不均匀的附着物, 硫含量略高. 采用NNF为集流体时, 由于泡沫镍具有缓冲硫正极体积变化的孔道结构, 正极极片能基本保持原本的形貌; 特别是在NNF上原位生长的NiS可电催化加速多硫化物中间体的转化, 减少多硫化物的生成并减缓其穿梭, 不干扰镁负极上发生的电化学反应, 使镁负极极片表面更为均匀, 明显改善了镁硫电池的循环稳定性和倍率性能.     

基底表面性质与前驱液化学环境对原位定向构筑钛硅分子筛膜的影响

b取向MFI型分子筛膜能够显著促进分子的传输效率, 被广泛应用于混合物分离及催化领域. 虽然传统的原位水热晶化法已较为成熟, 然而仍难以调控膜层的b轴取向生长. 本文以304不锈钢片为基底, 采用经典的原位水热晶化法研究了基底表面物化性质、 前驱液配比及晶化条件对钛硅分子筛膜b轴取向生长的影响. 结果表明, TiO₂中间层表面的羟基能够定向诱导分子筛晶粒的吸附, 进而提高钛硅分子筛膜的b轴取向程度. 同时, 前驱液中模板剂和水含量对晶粒的大小及膜层的定向生长具有显著影响, 即仅在合适的碱度下才能形成高b轴取向的钛硅分子筛膜.     

One Step Fabrication and Application of Antibacterial Electrospun Zein/Cinnamon Oil Membrane Wound Dressing via In situ Electrospinning Process

Antibacterial wound dressing can benefit the wound healing by preventing bacterial infection, especially for the electrospun ones due to their porous structures and easily loading antibacterial drugs. However, it is challenging to apply the antibacterial electrospun wound dressing to covering the wound conveniently and safely. Here, we presented one step fabrication and application of antibacterial electrospun zein/cinnamon oil wound dressing via a handheld electrospinning setup. The prepared zein/cinnamon oil wound dressing showed gas permeability of (76.1±5.45) mm/s, hydrophilicity with zero body fluid contact angle, swelling stability after 24 h as well as antibacterial zones over 5 cm against both E. coli and S. aureus bacteria. Moreover, in situ electrospinning process can deposit the electrospun zein/cinnamon oil fibers directly onto the wound, meantime forming a wound dressing. The mice cut-wound model experiment demonstrated that the one step in situ fabrication and application of zein/cinnamon oil wound dressing could nearly heal the wound within 11 d.     

电解水催化材料动态构效关系的原位拉曼研究进展北大核心CSCD

可再生能源电解水产氢对于实现碳中和目标和未来可持续社会的发展具有重要意义。然而,在电解水服役过程中,催化材料往往会发生复杂的结构演变,这对深入理解电解水催化材料反应机制和精准设计高效催化材料造成了挑战。原位电化学拉曼表征技术对催化材料结构动态演变过程的实时监测,是揭示电解水材料动态构效关系,解析催化反应机理的关键。本文介绍了原位电化学拉曼表征技术的基本原理,重点综述了其在催化材料相结构演变、表面活性位点和界面水分子行为中的最新进展,阐述了电解水催化材料在服役过程中结构演变与性能演变之间的变化规律,为实现催化材料全生命周期动态构效关系的精准构建提供了技术基础。最后,分析总结了原位电化学拉曼表征技术在电解水应用过程中存在的问题与挑战,并对先进原位电化学拉曼技术未来的发展进行了展望。     

Droplet-based microdialysis-Concept, theory, and design considerations

The capability of continuously sampling the extracellular fluid opens up a wide range of applications of microdialysis in biological, pharmaceutical, and clinical studies. Existing microdialysis, however, faces challenges in sampling analytes with fast clearance and limited diffusivity because sampling resolution is limited by device size. Size reduction in probes and interconnected cannulae is a promising solution to improve temporal and spatial resolution. But the back pressure produced by resistance to laminar flows will be magnified in smaller channels, raising a concern as to whether it is feasible to operate continuous perfusion for miniaturized microdialysis. We demonstrate that a 10-fold smaller channel will exhibit 100-fold larger back pressure in response to the increase in the flow rate to maintain the relative recovery. In order to overcome the foreseen back pressure issue, this paper discusses a new concept using discrete droplets instead of continuous flows to operate dialysis in a miniaturized probe. This conceptual design is referred to as droplet-based digital microdialysis, in which droplets are produced, controlled and advanced within microchannels at a rate that in theory should allow for analytes to equilibrate with the extracellular fluid under no flow conditions. Expecting that a digital droplet design will entirely eliminate back pressure by introducing air between droplets, we numerically compare the equilibration kinematics of droplets to that of continuous flow. Results suggest equilibration of low molecular weight analytes between intermittently stationary droplets and the extracellular fluid in a few seconds. Considerations in design, prototyping, calibration and quantification, and the integration with other devices are suggested.     

Fe的原位掺杂对Pt/Silicalite-1催化丙烷脱氢反应性能的提升作用

利用一步水热法制备了原位掺杂Fe的Silicalite-1分子筛载体,浸渍得到相应的Pt基催化剂,用于丙烷的直接脱氢反应。作为对比,也制备了Pt/Silicalite-1和共浸渍的Pt1Fe2/Silicalite-1催化剂。研究发现较之Pt/Silicalite-1催化剂,原位掺入Fe的Pt/Fe-Silicalite-1催化剂反应性能有了很大程度地提高,而共浸渍制备的Pt1Fe2/Silicalite-1催化剂反应性能有所降低。在Pt/Fe-Silicalite-1催化剂上,尽管丙烷的初始转化率略有降低,但丙烯的选择性和催化稳定性大幅提高。反应8 h后丙烷转化率稳定在43.7%、丙烯选择性达到98.0%;且在80 h内基本保持不变。深入表征发现Fe的原位掺入使得Pt物种配位饱和度提高,避免了丙烷的深度脱氢使得丙烯选择性提高、结焦速率降低;且通过Fe-Pt之间电子转移,使得Pt上的电子云密度增强,增强了丙烯的脱附能力,进一步降低了结焦速率。另外载体中的Fe位点可以锚定Pt,使得Pt物种不易聚集,从而进一步提高了Pt/Fe-Silicalite-1的稳定性,使得该催化剂在反应80 h后仍保持高转化率和选择性。     

Flame retardant polyamide 6 by in situ polymerization of ε-caprolactam in the presence of melamine derivatives

An improved method for preparing melamine cyanurate （MCA） based flame retardant polyamide 6 （FRPA6） materials has been proposed. This processing method, i.e., improved in situ polymerization, was used to synthesize flame retardant PA6. In situ formed MCA nanoparticles were supposed to be linked to PA6 chains in the ε-caprolactam hydrolytic polymerization system to obtain startype polymers for the first time. Through TEM photographs, it can be found that the in situ formed MCA nanoparticles with diametric size of less than 50 nm, are nanoscaled, highly uniformly dispersed in the PA6 matrix. Synthesized flame retardant PA6 have good fire performance which can achieve UL-94 V-0 rating at 1.6 mm thickness with the presence of 7.34 wt.% MCA in the matrix.     

Voltammetric in situ measurements of trace metals in coastal waters

Developments in instrument miniaturisation and automation have resulted in the manufacture of portable electrochemical instrumentation for continuous trace-metal measurements from the banks of estuaries and on board ships. The most recent developments in flow cells with gel-coated iridium (Ir) micro-electrode arrays have resulted in submersible in situ voltammetric probes that allow long-term trace-metal monitoring at sub-nanomolar concentrations in coastal waters. This article overviews the design and the application of field-deployable voltammetric instrumentation for trace-metal monitoring.     

Copper-sulfide cluster assembled architecture via in situ reaction

A new copper-thiolate cluster assembled framework [Cu₂(μ₄-SCH₃)Cl]_n (1), has been solvothermally synthesized through in situ reaction viz., in situ ligand generation and metal reduction. Compound 1 represents the first 3D framework based on Atlas-sphere functionalized by single μ₂-Cl^- groups. DOS calculation reveals the interaction of electronic structures. It is found that the HOMO is mainly distributed on Cl, Cu and S bonding orbitals, while the LUMO is dominated by Cu-Cl antibonding orbitals.     

原位晶化FCC催化剂传质性能的频率响应法辨析

以苯为探针分子,采用频率响应(FR)技术和智能重量分析仪(IGA)研究了原位晶化流化催化裂化(FCC)催化剂上的传质行为。结合N₂吸附和扫描电镜(SEM)剖析所得织构性质数据,并与传统半合成FCC催化剂以及稀土改性Y分子筛传质性能进行对比,结果表明原位晶化FCC催化剂所具有的独特纳米化和高度分散的分子筛组分分布状态,显著改善了基质大孔/介孔结构与分子筛微孔孔道的贯通性,削弱了分子筛孔道与基质界面间的传质阻力,从而优化了成型催化剂颗粒的传质性能。本研究再次证实了频率响应技术可以检测和辨析多孔催化材料体系中发生的复杂吸附-扩散过程,是一种有效的多级孔催化材料传质性能的研究手段。     

In vivo sampling using loop microdialysis probes coupled to a liquid chromatograph.

Microdialysis probes with longer membranes (20-100 mm) provide increased relative recovery over traditional shorter probes (1-4 mm) developed for neuroscience applications. The characterization and optimization of "straight through" or "loop type" probes for use in subcutaneous tissue are considered. Membrane area, probe size, inlet and outlet tubing dimensions, and flow-rate are examined for their effects on relative recovery, the total collection rate, and bulk flow through the membrane wall. Polyacrylonitrile and regenerated cellulose membrane fibers with different geometries were compared. Sampling probes used fibers 3-10 cm long. Inlet and outlet tubing was varied from 25 to 110 microns I.D. with lengths of 10 to 50 cm. Probe configurations optimized for relative recovery, flow-rate, and utility for in vivo use are presented. Utilizing microdialysis probes with large membrane surface areas results in relative concentration recovery of greater than 50% at flow-rates of greater than 5 microliters/min. Therapeutic drug monitoring in subcutaneous tissue of awake animals is explored.     

高温红外光谱电化学薄层池的制作与表征

为了拓宽光谱电化学研究范围,开展高温下电化学反应过程,本文研制了一种高温红外光谱电化学薄层池(HTC)。 研制的HTC清洗方便,操作简单,适用于水体系和有机体系。 该HTC可在室温至373 K(根据溶剂沸点,控温精度为±0.5 K)温度范围内使用,具有良好的电化学性能,红外光谱采集谱图清晰信噪比好。 利用铁氰化钾水溶液和对苯醌离子液体溶液的红外光谱电化学行为对HTC进行了表征,得到较满意的结果。     

In situ Activatable Peptide-based Nanoprobes for Tumor Imaging

Owing to its excellent biological properties, peptide has been widely used in the design of nanoprobes capable of enhancing tumor imaging signals. In recent years, a number of peptide-based nanoprobes with strong loading capacity and great biocompatibility have been developed for precision tumor imaging by coupling peptide motifs with different imaging agents. It is worth noting that, compared with "always on" mode, the use of stimulus-mediated in situ activatable mode to design and control the self-assembly or nanostructure transformation of peptide-based nanoprobes in vivo can achieve the significant improvement of imaging efficiency. Herein, we summarize the recent progress of in situ activatable peptide-based nanoprobes for tumor imaging in diverse imaging modes, including magnetic resonance imaging(MRI), fluorescence imaging(FI), photoacoustic imaging(PAI), radionuclide imaging(RI) and multimodal imaging. Finally, we briefly prospect the challenges and potential development directions of this field.     

环己烯对噻吩在CuY分子筛上吸附的影响机制

A CuY zeolite prepared by liquid phase ion exchange was characterized by X-ray photoelectron spectroscopy, pyridine in situ Fourier transform infrared (in situ FTIR) spectroscopy, and ammonia temperature programmed desorption. The effect of cyclohexene on the adsorption of thiophene over the prepared CuY zeolite was explored by in situ FTIR. In particular, the role of the zeolite's Br?nsted acidity was investigated in the adsorption process. The results show that the percentage of Cu⁺ on the surface of the CuY zeolite can reach 77%. The surface acidity of the CuY zeolite mainly comprises medium and strong Br?nsted acidity and Lewis acidity. According to the adsorption results, cyclohexene negatively influences thiophene adsorption on the Br?nsted or Lewis acid sites in CuY by competitive adsorption. Although polymerization of thiophene and cyclohexene can occur easily on the HY or REY zeolites, the presence of Br?nsted acids in the CuY zeolite was not sufficient to polymerize either thiophene or cyclohexene. This difference may be caused by an anti-synergistic effect between the Cu ions of the CuY zeolite and neighboring Br?nsted acid sites, the result of which inhibits the polymerization of adsorbed thiophene and cyclohexene.