Calix[4]tubes: a new class of potassium-selective ionophore

A new class of cryptand-like ionophore based on a bis calix[4]arene structure has been developed. These molecules proved highly selective for complexation of potassium over all group I metal cations and barium. A range of symmetric and asymmetric calix[4]tubes featuring either alkyl or phenyl substituents at the upper rim have been synthesized in exceptional yield. Alteration of the calix[4]arene upper rim environment enables fine-tuning of the rate of potassium uptake, which can be evaluated through the conformational change on binding by NMR studies. Selectivity of potassium complexation has been demonstrated using NMR and electrospray mass spectral techniques. Molecular modeling studies, derived from crystallographic data, confirm that the potassium metal cation is complexed via the axial route, passing through the calix[4]arene annulus, and provide evidence for complexation rate and selectivity.     

Synthesis and metal ion complexation studies of proton-ionizable calix

A series of novel N-chromogenic calix[4]arene azacrown ethers were synthesized as selective extractants of potassium ion. 1,3-Alternate calix[4]arene azacrown ethers were prepared by reacting 25,27-dipropyloxy-26,28-bis(5-chloro-3-oxapentyloxy) calix[4]arenes with p-toluenesulfonamide in the presence of potassium carbonate. The coupling reaction of calix[4]arene azacrown ether with 2-hydroxy-5-nitrobenzyl bromide in the presence of triethylamine in THF gave the chromogenic calix[4]arene azacrown ether in moderate yield. These compounds show high potassium selectivity over other metal ions as shown by two-phase extraction, bulk liquid membrane, and 1H NMR studies on a ligand-metal complex. It is assumed that the OH of the chromogenic group attached on nitrogen can assist the complexation by encapsulation of the metal.     

邻甲氧基羰基苄氧基取代杯[4]芳烃衍生物的合成及其性？…

杯芳烃是继冠醚、环糊精之后的第三代主体分子 [1] .据文献 [2 ,3]报道 ,在杯 [4]芳烃下沿酚氧原子上连接乙酸酯得到的四取代衍生物对 Na+ 有很高的选择性 ,核磁与晶体结构研究均证实这是由于羧酸酯的羰基和酚氧基参与了对 Na+ 的配位 ,而且配位基团所形成的包络空间大小与钠离子相匹配 .一般认为 ,随着包络空间改变 ,对金属离子的识别作用会有所变化[4] .但目前对这方面的工作并没有给予更多的重视 .我们发现 ,用 2 -溴甲基苯甲酸甲酯与杯 [4 ]芳烃反应 ,得到了一种新的四取代杯 [4]芳烃衍生物 2 ,萃取研究结果表明 ,该化合物对钾离子有较…     

邻甲氧基羰基苄氧基取代杯[4]芳烃衍生物的合成及其性能研究

杯芳烃是继冠醚、环糊精之后的第三代主体分子[1].据文献[2,3]报道,在杯[4]芳烃下沿酚氧原子上连接乙酸酯得到的四取代衍生物对Na+有很高的选择性,核磁与晶体结构研究均证实这是由于羧酸酯的羰基和酚氧基参与了对Na+的配位,而且配位基团所形成的包络空间大小与钠离子相匹配.一般认为,随着包络空间改变,对金属离子的识别作用会有所变化[4].但目前对这方面的工作并没有给予更多的重视.我们发现,用2-溴甲基苯甲酸甲酯与杯[4]芳烃反应,得到了一种新的四取代杯[4]芳烃衍生物[2]萃取研究结果表明,该化合物对钾离子有较好的选择性.此外,在合成该衍生物的过程中,还得到了另一新的二取代衍生物(3).     

Potassium Sensing Calix[4]arene Crown Ethers

1,3-Alternate calix[4]arene crown-5 (1) and corresponding biscrown-5 (2) were synthesized and the complexation behavior with alkali metal ions examined. For both 1 and 2, potassium ion was selectively extracted from aqueous phase into organic phase over other alkali metal ions based on two phase extraction experiment. The complexation ratio between calix[4]arene biscrown-5 (2), in which two crown cavities connect to the calix[4]arene framework by 1,3-alternate fashion and potassium metal ion is found to 1:1 by proton NMR spectroscopy and extraction equilibria. Association constants (logK_a) for 1 and 2 were determined to give 2.51 and 3.49, respectively.     

Information transfer in calix[4]arenes: influence of upper rim substitution on alkaline metal complexation at the lower rim

Novel calix[4]arene amides have been synthesized and their interaction with alkaline cations has been evaluated through extracting aqueous solutions of Li-, Na- and K-picrates with solutions of calix[4]arene amides in CH₂Cl₂. Electron-withdrawing groups on the upper rim of the calix[4]arene scaffold were found to have a negative effect on the absolute amount of metal ions extracted. The decreased extraction ability is accompanied by a higher selectivity towards sodium cations.     

Tube-type coordination polymers: two- and four-silver(I)-mediated linear networking of calix[4]arene tetracarboxylates

Two calix[4]arene tetracarboxylates, [calix[4]arene tetraacetate (K(4)CTA) and calix[4]arene tetrabenzoate (K(4)CTB)] as their potassium salts, have been prepared. Employing these as precursors, two Ag(I) coordination polymers incorporating calix[4]arene units have been successfully prepared and their X-ray crystal structures have been determined. In these, the CTA and CTB derivatives are linearly bound to two and four silver atoms, respectively, to generate unusual tubular nanostructures. A comparative NMR study was undertaken to investigate the nature of the metal ion blocking of the tube as observed in the CTA-derived structure. The thermal properties for both coordination polymers were also examined.     

Conformational templation in a singly bridged calix[7]arene derivative induced by alkali metal cations

The first examples of alkali metal cation conformational templation of a calix[7]arene derivative were found in the alkali salts of 1,4-calix[7]crown-4, which were obtained by its treatment with the corresponding alkali metal carbonates. Competitive experiments showed that potassium and rubidium cations give the most effective templation, with a slight preference for the former. Experimental results and Monte Carlo conformational searches indicated that the cation interacts with all O-atoms including those of the crown-4 bridge.     

Syntheses of novel calix[4]arene hydrazone-based receptors and their cooperative complexation with soft and hard metal ions

Four novel calix[4]arene hydrazone-based receptors 3a?Cd were prepared in yields of 69?C87% by condensating formylated calix[4]arene ester (2) with salicylyl hydrazine, 2,4-dinitrophenyl hydrazine, nicotinyl hydrazine or phenyl thiosemicarhazide, respectively. New compounds were characterized through elemental analysis, IR, ESI?CMS, ¹H NMR studies. Compounds 3a?Cd containing two binding sites had the complexation abilities for hard and soft cations concurrently. The noncompetitive extracting experiments showed compounds 3a?Cd were excellent receptors for hard and soft metal cations. The competitive extracting experiments exhibited the cooperative complexation in binding hard and soft metal cations and compound 3a possessed outstanding selectivity for Na⁺ and Hg²⁺. The IR spectra of compound 3a before and after complexation revealed that the soft metal cation was binded in the cavity composed of hydrazone groups and azo groups at the upper rims of calix[4]arene units and hard metal cations was binded in cavity composed of ester groups and phenolic hydroxyl groups at the lower rims of calix[4]arene units.     

Salt-Bridge Supported Bilayer Lipid Membrane Modified with Calix[n]arenes as Alkali Cation Sensors

ABSTRACT

Potentiometric behaviors of a salt-bridge supported bilayer lipid membrane (Sb-BLM) modified with Calix[n]arene (n=4, 6, 8) derivatives are described for some alkali metal ions. The modified Sb-BLM was used as an alkali cation sensor. The membrane potentials were observed to generate Nernstian responses to the concentration of alkali metal ions in electrolyte. The Sb-BLM modified with the calix[n]arenes show high selectivity for individual alkali metal ions: Calix[8]arenes for K⁺, calix[6]arenes for Cs⁺ Calix[4]arenes show no selectivity for any alkali ions. The interacting mechanism is also discussed.     

Cation-dependent binding of zinc diethoxycarbonylcalix[4]arenebis(porphyrinate) triethylenediamine

Zinc calix[4]arene-bis(porphyrinate) with two ethoxycarbonyl substituents at the lower rim of the calix[4]arene moiety was synthesized. Its complexation properties toward the sodium cation and triethylenediamine were studied. The influence of the binding of the sodium cation by the calix[4]arene moiety on the complexation properties of the interporphyrin cavity toward triethylenediamine was revealed.     

Stilbene-bridged 1,3-alternate calix[4]arene crown ether for selective alkali ion extraction

A series of stilbene-bridged calix[4]arenes was synthesized through an intramolecular reductive McMurry coupling of bisbenzaldehyde calix[4]arene in high yields. Tetra- and pentaethylene glycol chains were tethered to the phenolic groups of calix[4]arene to form stilbene-bridged calix[4]arene crown-5 and crown-6, respectively. The presence of stilbene bridge over the calix[4]arene rim effectively prevented the connection of the polyether chains in the cone conformation resulting in the exclusive formation of 1,3-alternate stilbene-bridged calix[4]arene crown product. Compared to the cone analogues, the 1,3-alternate calix[4]arene crown ethers showed a greater extraction ability and selectivity toward Cs⁺.     

Rigid versus flexible: how important is ligand "preorganization" for metal ion recognition by lower rim-functionalized calix[4]arenes?

For an assessment of the outcomes from use of an appropriately "preorganized" calixarene-based ionophore versus its conformationally mobile prototype, solvent extraction propensities of flexible calix[4]arene di-[N-(X-sulfonyl)carboxamides] for alkali, alkaline earth metal cations, Pb2+, Ag+ and Hg2+ are compared with those for seven new rigid analogs fixed in the cone, partial cone and 1,3-alternate conformations. For each of the metal ions, the preferred calix[4]arene conformation was determined from the NMR spectra for the metal salt of the flexible ligand. Except for Ag+, flexible calix[4]arene di-[N-(X-sulfonyl)carboxamides] were found to provide greater metal ion extraction efficiency and better selectivity than the corresponding "preorganized" ionophores.     

Preparation and chromatographic characteristics of calix[4]arene polysiloxane as stationary phases for capillary gas chromatography

Summary Two new kinds of calix[4]arene derivatives, 5, 11, 17, 23-tetra-tert-butyl-25,27-bis(isopropylcarbamoyl-methoxy)-26,28-diundecenyloxy calix[4]arene (C[4]A) and 25,27-dibutoxy-5, 11, 17, 23-tetra-tert-butyl-26,28-diundecenyloxy calix[4]arene (C[4]B0, are prepared and then are polymized by two different processes. Three calix[4]arene polysiloxane stationary phases for capillary gas chromatography are obtained. Their chromatographic characteristics, including column efficiency, polarity, selectivity, glass-transition temperature and thermal stability are studied. Retention mechanisms are also discussed.     

含酰胺和席夫碱单元的杯[4]芳烃衍生物的合成与配合性能

杯[4]-1,3-二乙酸乙酯衍生物1与水合肼反应生成杯[4]芳烃酰肼衍生物2, 然后进一步与相应的芳醛反应, 高产率地合成了三个新型的含酰胺和席夫碱单元的杯[4]芳烃衍生物3a～3c和一例新型杯[4]冠醚4. 阳离子萃取实验表明新型杯芳烃衍生物比只含有酰胺基或席夫碱基的杯芳烃衍生物有更强的软金属离子配合性能, 杯[4]冠醚4还对Ag^＋有较好的选择性萃取能力.     

Self-assembled monolayers of organosulphur molecules bearing calix[4]arene moieties

We investigate the self-assembly of modified calix[4]arene on gold surfaces. Calix[4]arene was modified through a reaction sequence which led to assembling of the crown-5 moiety and to the insertion of two thioether groups into the starting molecule. The so-obtained calix[4]arene-crown-5 bis(7-thiatridecyloxy) (hereafter called calix[4]arene) was in the stable 1,3-alternate conformation. The calix[4]arene/gold interface was investigated by means of spectroscopic ellipsometry (SE), scanning tunneling microscopy (STM) and cyclic voltammetry (CV). SE data indicate a layer thickness compatible with the formation of a monomolecular layer. This result is confirmed by STM imaging which shows the formation of a high density of small pits, one gold layer deep, a typical feature of self-assembled organosulphur monolayers on gold. CV measurements performed in presence of the [Ru(NH(3))(6)(2+/3+)] redox couple indicate a passivation of the metal electrode, resulting in a reduction of the redox current, after the layer deposition. CV has also been used to investigate the selectivity properties of calix[4]arene-covered gold electrodes by measuring the redox current decrease in the presence of different salt solutions. It is found that calix[4]arene-covered electrodes are able to complex K(+) and Ba(2+), while no complexation is observed in the case of Li(+), Na(+), Cs(+), Mg(2+) and Ca(2+).     

Complexation of Calix[4]arene With Alkali Metal Cations: Conformational Binding Selectivity and Cation-π Driven Inclusion

Hartree-Fock, second order Møller-Plesset perturbation theory, and density functional theory calculations were carried out to analyse the complexation of calix[4]arene with cationic species including H + and the alkali metal cations (Li + , Na + , K + , Rb + , and Cs + ). Special emphasis has been placed on conformational binding selectivity, and on the structural characterization of the complexes. Li + and Na + cations are located in the calix[4]arene lower rim. The larger cations (K + , Rb + , and Cs + ) complex preferentially with the calix[4]arene cone conformer, and their endo (inclusive) complexation is driven by cation- ~ interactions, leading in the case of K + to a structure that reflects a preferential interaction with two phenol rings. The endo complexation of Cs + with calix[4]arene is in agreement with X-ray diffraction data.     

Cesium-ion selective electrodes based on calix[4]arene dibenzocrown ethers

Four calix[4]arene dibenzocrown ether compounds have been prepared and evaluated as Cs(+)-selective ligands in solvent polymeric membrane electrodes. The ionophores include 25,27-bis(1-propyloxy)calix[4]arene dibenzocrown-6 1, 25,27-bis(1-alkyloxy)calix[4]arene dibenzocrown-7s 2 and 3, and 25,27-bis(1-propyloxy)calix[4]arene dibenzocrown-8 4. For an ion-selective electrode (ISE) based on 1, the linear response concentration range is 1x10(-1) to 1x10(-6) M of Cs(+). Potentiometric selectivities of ISEs based on 1-4 for Cs(+) over other alkali metal cations, alkaline earth metal cations, and NH(4)(+) have been assessed. For 1-ISE, a remarkably high Cs(+)/Na(+) selectivity was observed, the selectivity coefficient (K(Cs,Na)(Pot)) being ca. 10(-5). As the size of crown ether ring is enlarged from crown-6 (1) to crown-7 (2 and 3) to crown-8 (4), the Cs(+) selectivity over other alkali metal cations, such as Na(+) and K(+), is reduced successively. Effects of membrane composition and pH in the aqueous solution upon the electrode properties are also discussed.     

Synthetic cation transporters incorporating crown ethers and calixarenes as headgroups and central relays: a comparison of sodium and chloride selectivity

An earlier study showed that a calix[4]arene could function as a central relay unit to form an ion conductance pathway through a phospholipid bilayer membrane. The present study expands the range of compounds from calix[4]arene to calix[6]arene and incorporates them either as central units or as headgroups, substituting one or more diaza-18-crown-6 residues in functioning hydraphiles. Ion release was assayed by detecting either Na(+) or Cl(-) release from phospholipid vesicles. The ion transport activity for calix[4]arenes in either position is modest, but is almost non-existent when calix[6] residues were incorporated either as head groups or central relay units. The poor activity of the calix[6]arenes may result from an inability to penetrate to the midplane of the bilayer or pass entirely through it to form a conductance pathway. The transmembrane "flip-flop" may result from high polarity or steric bulk, or both. A hydraphile incorporating a single -NHCOC(6)H(4)OCH(2)CONH- as a central relay proved to be an excellent Na(+) conductor, but less selective for Cl(-). The fact that this new hydraphile molecule shows selectivity for Na (+) over Cl(-) transport and possesses two secondary amide residues in the central relay suggests a means to control ion selectivity in synthetic ion transporters.     

新型杯[4]芳烃氨基苯酚类衍生物的合成及对La3 的选择性识别

设计合成了下缘连有氨基苯氧基结构的杯[4]芳烃衍生物:5,11,17,23-四叔丁基-25-[2-(2-氨基苯氧基)乙氧基]-27-(2-羟基乙氧基)-26,28-二羟基杯[4]芳烃(化合物C),增加了与阳离子的结合位点,有利于通过配位作用对金属离子进行识别。化合物C的结构通过红外光谱、1H NMR、13C NMR和质谱进行了表征。通过紫外可见光谱和荧光发射光谱对化合物C与24种金属阳离子的络合作用进行了研究,结果发现,其对La3+有特殊的识别作用,化合物C与La3+的络合比为1∶1。