Prediction of electrophoretic mobilities in non-aqueous capillary electrophoresis. Optimal separation of quinolones in acetonitrile-water media

A model of electrophoretic behaviour is used to predict the optimum conditions for the separation of a series of quinolones zwitterionic substances in mixtures of acetonitrile-water up to 30% (w/w) of acetonitrile. The effect of pH, pKa, the electrophoretic mobility of protonated and anionic species, and activity coefficients on the electrophoretic behaviour of quinolones is considered. The model proposed allows the resolution between substances in acetonitrile-water mixtures to be predicted from a few experimental data and thus permits one to obtain the best experimental conditions for separation methodologies.     

Capillary electrophoretic separation of inorganic and organic arsenic compounds

Capillary zone electrophoresis was used to separate arsenite, arsenate, dimethylarsinic and diphenylarsinic acid, methanearsonic acid, phenyl- and p-aminophenyl arsonic acid, phenylarsineoxide and phenarsazinic acid. Anionic and uncharged species were separated in a fused silica capillary with on-column UV detection at 200 nm. A 15 mM phosphate solution adjusted to pH 6.5 containing 10 mM sodium dodecylsulfonate served as background electrolyte. The influence of pH and applied voltage on separation efficiency, as well as the feasibility of identification of arsenic compounds in spiked urine, were investigated. Received: 18 March 1998 / Revised: 25 May 1998 / Accepted: 30 May 1998     

Capillary electrophoretic separation of inorganic and organic arsenic compounds

Capillary zone electrophoresis was used to separate arsenite, arsenate, dimethylarsinic and diphenylarsinic acid, methanearsonic acid, phenyl- and p-aminophenyl arsonic acid, phenylarsineoxide and phenarsazinic acid. Anionic and uncharged species were separated in a fused silica capillary with on-column UV detection at 200 nm. A 15 mM phosphate solution adjusted to pH 6.5 containing 10 mM sodium dodecylsulfonate served as background electrolyte. The influence of pH and applied voltage on separation efficiency, as well as the feasibility of identification of arsenic compounds in spiked urine, were investigated. Received: 18 March 1998 / Revised: 25 May 1998 / Accepted: 30 May 1998     

Capillary electrophoresis in mixed aqueous-organic media: Effect of tetrahydrofuran on mobilities, dissociation constants and separation of a series of quinolones

Summary The influence of the composition of aqueous-tetrahydrofuran mixtures on the electrophoretic behaviour of nine quinolones was studied in order to predict the optimum conditions for their separation. The effect of pH, pK _a and activity coefficients on electrophoretic behaviour was established. Standard pH values for buffer solutions of the NIST scale as previously determined in THF-water were used in accordance with IUPAC rules. pH was therefore measured for these media as for water. The pK _a values of quinolones were determined from the electrophoretic mobilities-pH data pairs in different THF-water mixtures. The electrophoretic resolution between pairs of substances was then predicted in order to obtain the optimal experimental conditions for separation methodologies.     

Capillary electrophoresis of boron cluster compounds in aqueous and nonaqueous solvents

The electrophoretic properties of boron cluster compounds were determined in water, methanol and ACN as solvents of the BGE and discussed based on the principles of ion migration. Two types of boron cluster compounds were investigated. One type consisted of derivatives of the nido-7,8-dicarbaundecaborate cluster, the other types are derivatized cobalt bis(dicarbollide) ions (COSANs) whose central cobalt atom is sandwiched by two 7,8-dicarbaundecaborate clusters. The BGE in all solvents was acetate/acetic acid buffer with pH 4.75 in water, 9.7 in methanol and 22.3 in ACN, respectively, at different ionic strength between 5 and 30 mM. The dependence of the mobility on ionic strength could not be explained by the theory of Debye, Hückel and Onsager, but good agreement was found upon considering an ion size parameter. Limiting mobilities were derived by curve fitting, and by the aid of the solvent viscosities the hydrodynamic radii of the analyte anions were calculated. They are between 0.25 and 0.48 nm, and were nearly independent of the solvent. Electrophoresis of the analytes in a BGE consisting of 6 mM perchloric acid in ACN allows the conclusion that the present boron cluster compounds behave as stronger acids than perchloric acid.     

Capillary electrophoretic separation of glycoproteins

Ｇｌｙｃｏｐｒｏｔｅｉｎｓａｒｅｋｎｏｗｎｔｏｂｅａｎｉｍｐｏｒｔａｎｔｇｒｏｕｐｏｆｆｕｎｃｔｉｏｎａｌｍａｃｒｏｍｏｌｅｃｕｌｅｓｉｎｂｉｏｌｏｇｉｃａｌｓｙｓｔｅｍｓ,ｂｕｔｉｔｉｓｍｏｒｅｄｉｆｆｉｃｕｌｔｔｏａｎａｌｙｚｅｔｈｅｍｔｈａｎｎｏｒｍａｌｐｒｏｔｅｉｎｓ.Ｔｈｅｍｏｓｔｓｅｒｉｏｕｓｐｒｏｂｌｅｍｌｉｅｓｉｎｔｈｅａｎａｌｙｓｉｓｏｆｔｈｅｉｒｍｉｃｒｏｈｅｔｅｒｏｇｅｎｅｉｔｙｗｈｉｃｈｉｓａｓｐｅｃｉａｌｐｈｅｎｏｍｅｎｏｎｏｆｇｌｙｃｏｃｏｎｊｕｇａｔｅｓ.Ｄｉｆｆｅｒ…     

Capillary electrophoretic separation of nanoparticles

In the present work, CdSe nanocrystals (NCs) synthesized with a trioctylphosphine surface passivation layer were modified using amphiphilic molecules to form a surface bilayer capable of providing stable NCs aqueous solutions. Such modified nanocrystals were used as a test solute in order to analyze new electrophoretic phenomena, by applying a micellar plug as a separation tool for discriminating nanocrystals between micellar and micelle-free zones during electrophoresis. The distribution of NCs between both zones depended on the affinity of nanocrystals towards the micellar zone, and this relies on the kind of surface ligands attached to the NCs, as well as electrophoretic conditions applied. In this case, the NCs that migrated within a micellar zone can be focused using a preconcentration mechanism. By modifying electrophoretic conditions, NCs were forced to migrate outside the micellar zone in the form of a typical CZE peak. In this situation, a two-order difference in separation efficiencies, in terms of theoretical plates, was observed between focused NCs (N ~ 10⁷) and a typical CZE peak for NCs (N ~ 10⁵). By applying the amino-functionalized NCs the preconcentration of NCs, using a micellar plug, was examined, with the conclusion that preconcentration efficiency, in terms of the enhancement factor for peak height (SEF_height) can be, at least 20. The distribution effect was applied to separate CdSe/ZnS NCs encapsulated in silica, as well as surface-modified with DNA, which allows the estimation of the yield of conjugation of biologically active molecules to a particle surface.     

Capillary electrophoresis applied for the determination of acidity constants and limiting electrophoretic mobilities of ionizable herbicides including glyphosate and its metabolites and for their simultaneous separation

Thermodynamic acidity constants and limiting ionic mobilities were determined for polyprotic non-chromophore analytes using capillary electrophoresis with capacitively coupled contactless conductivity detection. It was not necessary to work with buffers of identical ionic strength as ionic strength effects on effective electrophoretic mobilities were corrected by modeling during data evaluation (software AnglerFish). The mobility data from capillary electrophoresis coupled to conductivity detection were determined in the pH range from 1.25 to 12.02 with a high resolution (36 pH steps). With this strategy, thermodynamic acidity constants and limiting ionic mobilities for various acidic herbicides were determined, sometimes for the first time. The model analytes included glyphosate, its metabolites, and its acetylated derivates (aminomethyl phosphonic acid, glyoxylic acid, sarcosine, glycine, N-acetyl glyphosate, N-acetyl aminomethyl phosphonic acid, hydroxymethyl phosphonic acid). The obtained data were used in simulations to optimize separations by capillary electrophoresis. Simulations correlated very well to experimental results. With the new method, the separation of glyphosate from interfering components like phosphate in beer samples was possible.     

Calculation of electrophoretic mobilities in water-organic modifier mixtures in capillary electrophoresis

In order to correlate/predict electrophoretic mobility data in the mixture of water+organic modifier four equations have been presented and examined. The experimental mobilities of five analytes were determined in a water-methanol mixture. These data have been used to assess the accuracy and predictability of the models. Also, some previously published mobility data in water-organic modifier mixtures has been employed for further evaluation of the models. The models produced accurate results and the means of percentage deviations were in the range of 0.66-1.30.     

Capillary electrophoretic separation of amino acids: Fraction collection

A simple method is described which enables solutes to be collected at an electrically isolated exit after they have been separated by a free solution capillary electrophoretic system. The method is illustrated by the separation of dansyl amino acids using multiple separation capillaries.     

Nonaqueous media for separation of nonionic organic compounds by capillary electrophoresis

For the separation of neutral compounds by micellar electrokinetic chromatography, separations are usually carried out in predominantly aqueous solution in order to preserve the charged micelle necessary for the separation. We now show that polycyclic aromatic hydrocarbon (PAH) compounds can be separated efficiently by capillary electrophoresis in pure methanol or in aqueous-organic mixtures containing a high percentage of methanol. Sodium tetradecyl sulfate was the preferred surfactant. The effects of pH, solvent composition, surfactant structure, and surfactant concentration on the separations were studied. Reproducible migration times and linear calibration plots were obtained.     

Capillary zone electrophoresis of sub-microm-sized particles in electrolyte solutions of various ionic strengths: size-dependent electrophoretic migration and separation efficiency

To gain insight into the mechanisms of size-dependent separation of microparticles in capillary zone electrophoresis (CZE), sulfated polystyrene latex microspheres of 139, 189, 268, and 381 nm radius were subjected to CZE in Tris-borate buffers of various ionic strengths ranging from 0.0003 to 0.005, at electric field strengths of 100-500 V cm(-1). Size-dependent electrophoretic migration of polystyrene particles in CZE was shown to be an explicit function of kappaR, where kappa(-1) and rare the thickness of electric double layer (which can be derived from the ionic strength of the buffer) and particle radius, respectively. Particle mobility depends on kappaR in a manner consistent with that expected from the Overbeek-Booth electrokinetic theory, though a charged hairy layer on the surface of polystyrene latex particles complicates the quantitative prediction and optimization of size-dependent separation of such particles in CZE. However, the Overbeek-Booth theory remains a useful general guide for size-dependent separation of microparticles in CZE. In accordance with it, it could be shown that, for a given pair of polystyrene particles of different sizes, there exists an ionic strength which provides the optimal separation selectivity. Peak spreading was promoted by both an increasing electric field strength and a decreasing ionic strength. When the capillary is efficiently thermostated, the electrophoretic heterogeneity of polystyrene microspheres appears to be the major contributor to peak spreading. Yet, at both elevated electric field strengths (500 V/cm) and the highest ionic strength used (0.005), thermal effects in a capillary appear to contribute significantly to peak spreading or can even dominate it.     

Capillary electrophoretic separation of recombinant granulocyte-colony-stimulating factor glycoforms

Free zone capillary electrophoresis separated recombinant human granulocyte-colony-stimulating factor, expressed in Chinese hamster ovary cells, into two well-resolved species. Following incubation with neuraminidase, these species comigrated, eluting earlier than either of the original two species. This indicated that the observed heterogeneity was caused by different amounts of sialic acid present on the carbohydrate portion of the protein. It was determined that optimum separation occurred in the buffer pH range 7–9. Evidence is also presented to show that these glycoforms migrate in order of increasing numbers of sialic acids present.     

Capillary electrophoretic separation of phenolic diterpenes from rosemary

The major phenolic diterpenes responsible for the antioxidant properties of rosemary extracts, namely carnosol and carnosic acid, were separated by capillary zone electrophoresis (CZE) using a 56 cm long uncoated fused-silica capillary and a 50 mM disodium tetraborate buffer of pH 10.1. The effect of the buffer type, pH and concentration, and the capillary length on the separation, was studied. Carnosol and carnosic acid were identified in the electrophoregrams of rosemary extracts through their migration times and UV spectra obtained by CZE analysis of pure compounds isolated from a rosemary extract by HPLC fractionation. The CZE method had good reproducibility (relative standard deviation less than 5%) and was applied to compare the contents of carnosol and carnosic acid in solid and oil-dispersed commercial extracts of rosemary and in rosemary leaves. The separation of carnosol and carnosic acid was accomplished in less than 11 min.     

Capillary electrophoretic separation of polycyclic aromatic sulfur heterocycles

Capillary electrophoresis (CE) was used to separate polycyclic aromatic sulfur heterocycles (PASHs), a class of compounds that occurs in fossil fuels and refined products of petroleum. An electric charge was introduced into the compounds through methylation or phenylation of the sulfur atom. Separations of standard PASHs that are expected to be present in industrially desulfurized fuels showed that CE possessed a higher resolution than reversed phase liquid chromatography. The CE method can separate all the monomethylbenzothiophenes; this is not achieved in capillary gas chromatography. A linear relationship was found between migration time and the calculated volume of the compounds. The PASHs in deeply desulfurized diesel were separated after preconcentration, and the electropherogram was compared with the chromatograms from GC and HPLC. Finally, derivatized PASHs are often enantiomeric and the enantiomers can be separated if a suitable cyclodextrin is added to the running buffer.     

Capillary electrophoretic separation of glutamate enantiomers in neural samples

A micellar electrokinetic chromatographic (MEKC) separation of glutamate (Glu) enantiomers fluorescently tagged with naphthalene-2,3-dicarboxaldehyde (NDA) is described. Chiral selectors tested included alpha-, beta-, and gamma-cyclodextrins, modified cyclodextrins, D-glucosamine, sucrose, taurocholate, and their binary mixtures. NDA-labeled Glu enantiomers were best resolved with beta-cyclodextrin in the presence of methanol as an organic modifier. Under the separation conditions, no other amino acids coelute with Glu enantiomers. Using NDA as the reagent, the labeling reaction proceeded readily in aqueous solution, and the spectroscopic properties of NDA fluorophore were optimum for the sensitive laser-induced fluorescence (LIF) detection. Glu enantiomers present in mass limited samples such as single neurons could be adequately quantified by coupling this separation with LIF detection. A detection limit of 0.57 microM Glu was obtained. Using the present method, D-Glu was detected in rat brain, and, for the first time, in ganglia and single neurons of Aplysia californica, an extensively studied neuronal model. Interestingly, the level of D-Glu was found to be higher than that of L-Glu in many Aplysia neurons.     

Capillary electrophoretic separation and characterizations of CdSe quantum dots

We have developed a capillary electrophoresis method to characterize the QD surface ligand interactions with various surfactant systems. The method was demonstrated with 2–5 nm CdSe nanoparticles surface-passivated with trioctylphosphine oxide (TOPO). Water solubility was accomplished by surfactant-assisted phase transfer via an oil-in-water microemulsion using either cationic, anionic, or non-ionic surfactants. Interaction between the QD surface ligand (TOPO) and the alkyl chain of the surfactant molecule produces a complex and dynamic surface coating that can be characterized through manipulation of CE separation buffer composition and capillary surface modification. Additional characterization of the QD surface ligand interactions with surfactants was accomplished by UV-VIS spectroscopy, photoluminescence, and TEM. It is anticipated that studies such as these will elucidate the dynamics of QD surface ligand modifications for use in sensors.      

Capillary zone electrophoresis of histidine-containing compounds

Capillary zone electrophoresis has been tested for the separation of angiotensins, cationic heptapeptides and model histidine derivatives. Good separation efficiencies are seen for peptides and model compounds with negative to small positive net charges. For net charge greater than +2, addition of putrescine to pH 6 buffer greatly suppresses ion exchange at anionic sites on fused silica. When operating at pH values where histidine groups are neutral, addition of Zn2+ allows separations based on metal, rather than proton, binding. Separation efficiencies and relative migration times are dependent on capillary length when ion-exchange behavior occurs.     

High voltage capillary zone electrophoresis: Operating parameters effects on electroendosmotic flows and electrophoretic mobilities

Summary In High Voltage Capillary Zone Electrophoresis a field is applied across a narrow bore capillary filled with electrolyte solution. An electroendosmotic (EEO) flow is generated within this capillary which sweeps solutes along the tube. An absolute method of flow estimation is described, along with some operating parameter effects on the solute mobility. System parameters enabling flow direction reversal and a zero flow are described. The use of several capillaries simultaneously and the effect of pH on EEO flow rates are also shown. Effects of various operating parameters on solute resolution are also detailed.     

Capillary electrophoretic determination of mercury compounds in different matrixes

Summary Capillary electrophoresis has been used to separate inorganic (Hg²⁺) and organic (methyl-, ethyl-, and phenylmercury) mercury compounds as their cysteine complexes. The optimized electrophoretic separation was performed in fused-silica capillary tubing at 25 kV with 25mm sodium borate buffer (pH 9.3). Identification and quantification of the mercury species at mg L⁻¹ levels was achieved by use of UV detection at 200 nm. The relative standard deviation (n=10) ranged from 0.38 to 0.51% for migration times and from 0.43 to 2.94% for corrected peak areas. Good recovery (>90%) was obtained for all four mercury species in surface waters, and for inorganic mercury and methylmercury in five- to tenfold diluted biofluids (urine, saliva, and cerebrospinal fluid). TheLOQ values obtained were too high to be useful for determination of mercury species in real samples. Presented at Balaton Symposium '01 on High-Performance Separation Methods, Siófok, Hungary, September 2–4, 2001