Models having the thermodynamic properties of aqueous solutions of tetraalkylammonium halides

The hypernetted-chain integral-equation-approximation method is used to calculate the ion-ion pair correlation functions and the thermodynamic properties of models of the kind previously studied,⁽¹⁾ which are based on an ion-ion pair potential having four terms: the usual Coulomb term, a core repulsion term, a term to represent a well-known dielectric repulsion effect, and a Gurney term to represent the effect of the overlap of the structure-modified regions, solvation shells or cospheres, when the ions come close together. The coefficientA _ij of the last term for each pairi,j of ionic species is the only parameter that is adjusted to fit the solution data. It is determined by fitting excess-free-energy (osmotic-coefficient) data. It is scaled to represent the molar free-energy change of water displaced from the cospheres when they overlap. The corresponding entropy changeS _ij and volume changeV _ij are determined by fitting, respectively, excessenthalpy and excess-volume data. Problems of finding a uniquely best set of parameters are discussed together with many examples of variations of the model, most of which require further investigation. A consistent set of these parameters, which represents much of what is known about the thermodynamic excess functions of these solutions at concentrations up to about 0.5M, is interpreted as far as possible in terms of the data for thermodynamic solvation functions for the same systems.This study was aided by a grant from the Office of Saline Water, U.S. Department of Interior.     

Thermodynamic properties of alkali halides. II. Enthalpies of dilution and heat capacities in water at 25°C

The enthalpies of dilution and volumetric specific heats of most alkali halides were measured in water at 25°C with flow microcalorimeters in the concentration range 0.01 to 1m. Apparent molal relative enthalpies _L, derived from the enthalpies of dilution, can be represented by a parametric equation in molality. Combining _L with osmotic data, excess entropies can be calculated. Excess free energies, enthalpies, and entropies are compared at 0.5m, and the observed trends are consistent with a model of structural interactions in aqueous alkali halide solutions. The apparent molal heat capacities _C were fitted with the equation _C= _C ^° +A_C(d₀m)^1/2+B _C m. The _C ^° are, in general, additive to better than 1 J-K^–1-mole^–1 and reflect mostly the structural part of ion-solvent interactions. Taking _C ^° (H⁺)=0, conventional ionic _C ^° are obtained. The parameterB _C for different pairs of ions follows approximately the same trends as the corresponding parameterB _V for apparent molal volumes and seems to reflect structural interactions between the ions.     

HCl-CoSO4水溶液热力学性质

在HCl-COSO4-H2O体系中,恒定溶液总离子强度I分别为0．2、0．4、0．6、0．8、1．0、1．5mol/kg．CoSO4在溶液中的离子强度分数yB分别恒定为0．00、0．10、0．20、0．30、0．50和0．70条件下,应用经典的电动势方法测定无液体接界电池(A)在278．15—323．15K温度范围内的电动势为：Pt,H2(10^5Pa)|HCl(cA),COSO4(cB),H2O|AgCl-Ag(A) 根据测得电池(A)的电动势数据,考虑到该体系存在硫酸的二级解离,应用数学迭代方法确定平衡体系氢离子的浓度,进而确定了混合溶液中HCl的活度系数γA。结果表明,在溶液中总离子强度保持恒定时,HCl的活度系数服从Hamed规则。在溶液组成恒定时,log γA对热力学温度1／T作图,是一条直线。     

U-Ti二元合金热力学性质

铀( Uranium)元素具有独特的5f电子结构(5f36d7s2),从熔点到室温有三种同素异晶体.由于铀的高原子序数和高密度特性,使其在核反应堆和核武器部件方面有重要用途.但是,由于铀原子核外的价电子较多,加上f电子的游移性较强,容易发生氧化,且随着温度升高而迅速降低强度.合金化是提高铀的工程性能的有效方法[1].     

Thermodynamic properties of liquid magnesium-nickel alloys

Summary Magnesium vapor pressures were determined over liquid Mg-Ni alloys for compositionsx _Mg>0.65 using an isopiestic method. Data points between 760 and 890°C were evaluated to derive corresponding partial thermodynamic properties. The composition dependence of the magnesium activities in liquid alloys is shown for a temperature of 1073 K. Additionally, it is possible to obtain the shape of the liquidus curve between about 60 and 70 at% Mg from the results of the isopiestic measurements.

---

Thermodynamische Eigenschaften flüssiger Mg-Ni Legierungen

Zusammenfassung Magnesiumdampfdrücke wurden mit Hilfe einer isopiestischen Methode über flüssigen Mg-Ni-Legierungen mit einer Zusammensetzungx _Mg>0.65 bestimmt. Aus experimentellen Punkten zwischen 760 und 890°C wurden die entsprechenden partiellen thermodynamischen Eigenschaften abgeleitet. Es wird die Konzentrationsabhängigkeit der Magnesiumaktivitäten in flüssigen Legierungen bei 1073 K gezeigt. Zusätzlich kann aus dem Ergebnis der isopiestischen Messungen der Verlauf der Liquiduskurve zwischen etwa 60 und 70 At% Mg ermittelt werden.

     

Standard Chemical Thermodynamic Properties of Perfluoro N-Alkanes

The chemical thermodynamic properties C_p°, ΔH_f° S°, ΔG_r° and K_p of gaseous perfluoro n-alkanes, P(CF₂)n F(2≤n≤10), have been calculated from 298.15 to 1000 K using the Benson method with C_p° = a″;b/T + c/T², C_p°=a+bT+c+/T² and C_p°=a″ + bT +cT². Better results are obtained for C_p°=a+b/T+c/T². The calculated chemical thermodynamic properties of C₂ F₆ (g) are in excellent agreement with the literature data of Stull, Westrum, and Sinke under IBM/PC microcomputer with STEP data base management system.     

缔合溶液热力学性质与谱学性质的关联

缔合溶液具有与理想溶液显著不同的热力学和谱学性质,对于热力学和谱学的研究,有助于我们理解缔合溶液的特殊行为.谱学技术中核磁共振(NMR)、红外(IR)和拉曼(Raman)光谱是研究分子间相互作用和溶液结构等微观性质的有效方法,谱学已成为分子热力学研究体系"四面体结构"中的第四个顶点.本文对缔合溶液中热力学(汽液平衡和焓)和谱学(NMR,IR和Raman)联系的最新研究进展进行了综述,着重介绍相关的模型,如化学缔合模型、局部组成(LC)、格子流体氢键(LFHB)理论以及统计缔合流体理论(SAFT).     

Thermodynamic properties at infinite dilution of several solutes in ethers by gas-liquid chromatography

Summary The thermodynamic properties of different solutes at infinite dilution have been determined at 323.15 K. Deviations from ideality are discussed in terms of different contributions. The activity coefficients are compared with the calculated values by the one group contribution method.     

Thermodynamic properties of dendrimers compared with linear polymers: General observations

The pressure‐volume‐temperature and thermal properties of dendrimers based on benzyl ether were measured and compared with literature values for monodisperse, linear polystyrenes. In addition, property measurements are presented for an exact linear analogue to the fifth‐generation dendrimer. The thermodynamic properties' molecular weight behavior for the dendrimers is unique when compared with that of linear polystyrene. All of the evidence presented in this work suggests that some form of structural transition occurs in the bulk at a molecular mass near that for the fourth‐generation dendrimer. No such transition is seen for polystyrene. Dendrimers exhibit an increased packing efficiency as evidenced by a decreased specific volume (increased density) as compared with an exact linear analogue of the fifth‐generation dendrimer analogue, and the dendrimer highlights the entropic differences between the two molecules. In addition, differences in the change in heat capacity with temperature for the two systems further allude to their entropic differences. A crystalline state can be formed for the lower generation dendrimer and linear analogue. This crystalline state is not seen in dendrimers above the third generation. These behaviors compiled with the difference in the glass‐transition temperature for the linear analogue suggest that the dendrimers' microstructure has a significant influence on the bulk thermodynamic state of the material. The Tait equation was fitted to the volume data for comparative purposes; the Tait equation has known limitations but was selected because of its widespread application. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 1766–1777, 2001     

Thermodynamic properties of aqueous mixtures of LiCl and Li2SO4 at different temperatures

Emf measurements were made on the cell without liquid junction: Li?ISE LiCl(m₁), Li₂SO₄(m₂) Ag/AgCl. The performances of the electrode pairs constructed in our laboratory were tested and exhibited near-Nernstian behavior. The mean activity coefficients of LiCl for the system Li⁺?Cl^??SO ₄ ^2? ?H₂O have been investigated by the emf values at temperatures of 0, 15, 35°C and constant total ionic strengths of 0.05, 0.1, 0.5, 1.0, 2.0, 3.0 and 5.0 mol·kg^?1. The activity coefficients decrease with increasing temperature and the ionic strength fraction of Li₂SO₄ in the mixtures. The thermodynamic properties are interpreted by use of Harned's empirical equations and Pitzer's ion interaction approach including the contribution of higher order electrostatic terms. The experimental results obey Harned's rule and are described by using Pitzer equations satisfactorily. The activity coefficients of Li₂SO₄, the osmotic coefficients and the excess free energies of mixing for the system in the experimental temperature range were reported.     

Thermodynamic properties of diatomic molecule systems under SO(2,1)‐anharmonic Eckart potential

Due to one of the most representative contributions to the energy in diatomic molecules being the vibrational, we consider the generalized Morse potential (GMP) as a typical interaction for one‐dimensional microscopic systems, which describes local anharmonic effects. From the Eckart potential (EP) model, it is possible to find a connection with the GMP model, as well as obtaining the analytical expression for the energy spectrum because it is based on algebras. This gives the macroscopic properties such as vibrational mean energy U, specific heat C, Helmholtz free energy F, and entropy S for a heteronuclear diatomic system, as well as with the exact partition function and its approximation for the high temperature region. Finally, a comparison is made between the graphs of some thermodynamic functions obtained with the GMP and the Morse potential (MP) for molecules.     

Thermodynamic properties of lithium chloride ammonia complexes for application inahigh-lifthigh temperature chemical heat pump

Ammonia absorption by and desorption from lithium chloride at different pressures has been studied using high-pressure differential scanning calorimetry, for application in a high-lift high temperature chemical heat pump. The measurements were performed under isobaric as well as under isothermal circumstances. Clausius–Clapeyron plots were constructed and used to calculate the thermodynamic parameters and to determine the stability regions of the different complexes. Controversies in literature as to the real existing phases are resolved.     

Thermodynamic properties of strong electrolyte solutions from correlation functions

General relations are presented to relate the fluctuation thermodynamic properties of multicomponent electrolyte solutions (concentration derivatives of the chemical potential, partial molar volume, and compressibility) to integrals of the total correlation function (Kirkwood-Buff solution theory) and of the nondivergent portion of the direct correlation function. Detailed expressions are given for the single-salt, single-solvent system. It appears that the direct correlation function expressions may be of more practical use in developing correlations for solution properties because, unlike the total correlation functions, terms exist which distinguish between cation and anion interactions with water and with other ions.     

锰基液流电池电解液的体积性质研究

体积性质是锰基液流电池电解液的重要热力学性质,常用于解释溶液中复杂的离子间相互作用关系。本文在283.15-318.15 K温度范围内,测定了浓度为0.5-3.0 mol/kg的MnSO₄水溶液的密度值,得到了MnSO₄溶液的几个热力学参数和弱分子间的相互作用关系。结合Pitzer电解液表观摩尔体积热力学模型,得到了体积参数β(0)V MX,β(1)V MX和CV MX,而且计算值与实验值的相关系数能够达到0.988。这一研究可以更好地理解锰电解液中离子相互作用机制,为优化电解液成分和提高电池性能提供理论支撑。     

Thermodynamic Properties of Aqueous Potassium Sulfate under Superambient Conditions

Using the ion-interaction or virial coefficient approach developed by Pitzer, the pressure dependencies of the osmotic and activity coefficients for K₂SO₄(aq) up to 225°C and 0.65 mol-kg^–1 have been calculated from recent literature data on the apparent molar volumes of K₂SO₄(aq). These pressure dependencies were combined with the osmotic and activity coefficients at 1 bar or P _sat, obtained from the model of Holmes and Mesmer to yield a comprehensive set of thermodynamic properties of K₂SO₄(aq) at temperatures from 25 to 225°C, pressures 100, 200, and 300 bars, and molalities to 0.65 mol-kg^–1.On leave from the     

Thermodynamic and aggregation properties of sodium dodecyl sulfate in aqueous binary mixtures of isomeric butanediols

The effect of aqueous binary mixtures of isomeric butanediols on the micellization of sodium dodecyl sulfate has been investigated. Conductivity and fluorescence techniques were employed to determine the critical micellar concentration, the degree of dissociation of the counterions and the aggregation numbers of the surfactants in these binary blends. Differential conductivity plots were employed to distinguish between the cooperative and the stepwise aggregation process of the surfactant in each solvent system. The mass-action model was employed to calculate the hydrophobic and the electrostatic contributions to the Gibbs energy of micellization as well as the monomer and the counterion concentrations in the postmicellar region. The thermodynamic parameters calculated for each system indicate that the micellization process occurs more readily in the presence of cosolvent owing to the formation of mixed micelles. Received: 5 July 2000 Accepted: 25 July 2000     

Thermodynamic properties and conductivities of some dodecylsurfactants in water

Densities, heat capacities, enthalpies of dilution, osmotic coefficients and conductivities are reported for dodecylamine hydrochloride, dodecyldimethylammonium and dodecyltrimethylammonium chloride in water over a wide range of concentration. The last two properties were also measured for dodecyltrimethylammonium bromide. From the thermodynamic data partial molar volumes, heat capacities and relative enthalpies and nonideal free energies and entropies were derived as a function of the surfactant concentration. The cmc's and degree of counterion dissociation were also calculated from the transport properties. It is shown that the trends of volumes, enthalpies, free energies and entropies are quite regular whereas heat capacities present maxima and minima at concentrations which depend on the nature of surfactants. Corresponding changes were observed in the osmotic coefficients and specific conductivities. The thermodynamic functions of micellization were evaluated on the basis of the pseudo-phase transition model. Finally, the effects of the introduction of methyl groups in the hydrophilic moiety of the surfactant and of the nature of the counterion on the thermodynamic properties of monomers and micelles are examined.     

Thermodynamic properties, intermolecular interaction parameters, and structure of aqueous amide solutions of ammonium and tetraalakylammonium bromides

The thermal effects of dissolution of ammonium bromide in water and its mixtures with formamide (FA) at 277–328 K were studied by the calorimetry method in the region of small additions of the nonaqueous component. The standard values of enthalpy and heat capacity of solution, as well as the temperature changes in the solution entropy and reduced dimensionless Gibbs energy, were calculated. The parameters of electrolyte-amide pair interactions were calculated using the McMillan-Mayer formalism. The contributions of the cation and anion to the pair interaction parameters were determined by the group additivity method. The results are compared with the data obtained previously for solutions of tetrabutyl-and tetraethylammonium bromides in aqueous solutions of FA and hexamethylphoshotriamide (HMPT). At elevated temperatures the system becomes less structured in amide solutions of tetraalkylammonium bromides (except solutions of Et₄NBr in aqueous HMPT) but more structured in solutions of ammonium bromide and in aqueous FA and HMPT.