Fungal hydroxylation of ethyl benzene and derivatives

The fungus $\text{Mortierella isabellina}$ converts ethyl benzene and a number of parasubstituted derivatives to the corresponding optically active 1-phenylethanols with enantiomeric excesses between 5 and 40%. Hydrogen removal from the substrate preceeds product formation and is stereochemically independent of it.     

Cu/SBA-1的合成及其对苯羟化反应的催化性能

以正硅酸乙酯(TEOS)为硅源,十六烷基三乙基溴化铵(CTEABr)为模板剂,在强酸性条件下采用溶胶-凝胶法合成了Cu掺杂SBA-1分子筛.用XRD、SEM、N2吸附/脱附、红外光谱对所制备的样品进行表征.XRD测定结果显示所合成的Cu/SBA-1具有明显的立方介孔结构,Cu/SBA-1比表面积达931 m2·g-1,...     

Preparation of Fe@Cu‐BDC and its catalytic performance for benzene hydroxylation

Novel Fe@Cu‐BDC catalysts were synthesized by adsorbing various contents of Fe ions on the surface and into the channels of Cu‐BDC support through an in situ method under ultrasonication. The structure of the catalysts was characterized using X‐ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy, energy‐dispersive X‐ray spectrometry, X‐ray photoelectron spectroscopy and thermogravimetric analysis. The catalytic activity of catalysts for benzene hydroxylation was evaluated. The results showed that the Fe@Cu‐BDC catalysts had favorable catalytic activity for benzene hydroxylation. The yield of products can reach ca 37% and the selectivity of phenol can reach ca 62% over the 6% Fe@Cu‐BDC catalyst at 60°C in a reaction time of 75 min. Furthermore, the contents of Fe and solvent played a key role in benzene hydroxylation. After the reaction, the catalyst could be easily separated from the reaction mixture by centrifugation and reused for five times without significant decrease in activity.     

Al-SBA-15介孔分子筛的合成、表征及其在苯酚叔丁基化反应中的催化性能

 通过嫁接的方法合成了Al-SBA-15介孔分子筛,用X射线衍射、透射电子显微镜、低温N2吸附和NH3程序升温脱附等方法进行了表征,并研究了其在苯酚叔丁基化反应中的催化性能. 结果表明, Al-SBA-15保持了母体SBA-15高度有序的六方介孔结构,具有较强的酸性,且在苯酚叔丁基化反应中表现出比Al-MCM-41更好的催化活性和2,4-二叔丁基苯酚选择性.     

无外加酸体系中高温合成Al-SBA-15

在无外加酸的体系中,以三嵌段共聚物P123为模板剂,一步合成有序介孔材料Al-SBA-15。考查了高温和硅/铝源物种共水解对产物形貌和结构性质的影响。XRD,N2吸附脱附,IR,SEM,TEM等结果表明,在无外加酸的体系中,升高晶化温度至423 K促使Al-SBA-15的短棒状颗粒分散、卷曲成环状。与较低晶化温度下得到的样品对比,孔径增大,比表面积明显降低。当晶化温度低于423 K,样品铝含量基本保持不变。研究还发现,硅源/铝源物种共水解时间超过20 h后,所得样品中铝含量明显降低。     

无外加酸体系中高温合成Al-SBA-15

在无外加酸的体系中,以三嵌段共聚物P123为模板剂,一步合成有序介孔材料Al-SBA-15。考查了高温和硅/铝源物种共水解对产物形貌和结构性质的影响。XRD,N₂吸附脱附,IR,SEM,TEM等结果表明,在无外加酸的体系中,升高晶化温度至423 K促使Al-SBA-15的短棒状颗粒分散、卷曲成环状。与较低晶化温度下得到的样品对比,孔径增大,比表面积明显降低。当晶化温度低于423 K,样品铝含量基本保持不变。研究还发现,硅源/铝源物种共水解时间超过20 h后,所得样品中铝含量明显降低。     

Pd/MCM-41催化剂的制备及其光催化苯羟基化的研究

以酸化高岭土为原料,采用水热法在碱性介质中制得MCM-41分子筛.以此分子筛为载体制备了负载型Pd催化剂并对载体和催化剂进行了氮气吸附脱附、X射线粉末衍射和透射电镜等表征.研究其在光催化苯羟基化反应中的催化性能,考察了Pd的负载量、氧化剂的用量、不同光源及光照时间等反应条件对催化剂催化性能的影响,以及催化剂的回收重复利用率.结果表明以H_2O_2为氧化剂时,在汞灯照射下,Pd/MCM-41催化剂对苯羟基化反应表现出了良好的催化性能.     

Mn/Al-SBA-15的制备及吸附脱硫性能

以嫁接法制备的Al-SBA-15为载体,醋酸锰为活性组分前驱体,通过浸渍法制备Mn/Al-SBA-15吸附剂。利用X射线衍射(XRD)、N₂吸附-脱附、NH₃程序升温脱附(NH₃-TPD)、吡啶-原位傅里叶变换红外(Py-FTIR)和X射线光电子能谱(XPS)等表征手段对吸附剂进行分析,以模拟汽油中噻吩的脱除反应为模型反应考察了吸附剂的吸附性能,确定了吸附剂的最佳Al/Si物质的量比,并结合表征结果对吸附剂脱硫过程进行机理探讨,最后研究了吸附剂的再生性能。实验结果表明,当Al/Si(mol ratio)为1:45时,吸附剂脱硫性能最高;吸附剂主要通过酸碱作用吸附噻吩分子;Al的引入提高了吸附剂的结构稳定性,从而提高了吸附剂的再生性能。     

高水热稳定有序介孔Al-SBA-15材料的优化合成及表征

借助无机铝盐自水解所产生的弱酸性环境,通过改变水热处理温度及无机铝盐的引入种类和引入量来调控合成体系中Al—OH及材料孔壁中Si—OH的相对含量,在不引入矿物质强酸的条件下,一步合成了具有高Al引入量且孔壁硅、铝物种达到原子水平均匀分散的Al-SBA-15介孔材料.表征结果表明,当以硝酸铝为铝源,水热处理温度和投料硅铝比分别为140℃和10时,所得样品具有高度有序的二维六方介孔结构及较高的水热稳定性,在经800℃高温水蒸气处理2 h后,其介孔比表面积和孔体积仅分别降低了18.82%和16.67%.此外,骨架Al的引入使所得样品同时具有B酸和L酸中心,且具有相对较强的酸性,在异丙苯催化裂化反应中表现出明显活性.     

Catalytic activity of iron-containing polymers in hydroxylation of benzene with hydrogen peroxide

Hydroxylation of benzene with hydrogen peroxide in aqueous acetonitrile at 50°C was studied. The KU-2-8 and KU-1 cation exchangers, and also specially synthesized cation exchangers and phenolformaldehyde resins derived from pyrocatechol and resorcinol, all modified with Fe(III) cations, were used as catalysts. The macrocomplex KU-2-8/Fe³⁺ showed the highest catalytic activity and ensured 32% yield of phenol in 15 min. The formation of phenol depends in a complex fashion on the initial concentration of hydrogen peroxide, content of Fe(III) ions in the polymer, and reaction time.     

High catalytic activity for CO oxidation of gold nanoparticles confined in acidic support Al-SBA-15 at low temperatures

While there is a large number of recent studies of Au nanocatalysts supported on metal oxides, low-temperature CO oxidation under an acidic environment has not yet been accomplished. Over a novel acidic Al-SBA-15 support, uniformly distributed gold nanoparticles with sizes approximately 2.7 nm were obtained by a successive procedure of aminosilane grafting, gold adsorption-reduction, and then high-temperature hydrogen treatment. The catalyst system, Au@Al-SBA-15, exhibits extraordinarily high activity for CO oxidation at 80 degrees C. By varying the Si/Al ratio of the support, the dependence of the catalytic activity on the support Si/Al ratio was found in the CO oxidation reaction.     

Cyclotriphosphazene grafted silica: a novel support for immobilizing the oxo-vanadium Schiff base moieties for hydroxylation of benzene

The first report on the use of chlorotriphosphazenyl anchored mesoporous silica as a novel support for the immobilization of oxo-vanadium Schiff base moieties is described. The resulting heterogeneous material showed better catalytic activity than homogeneous as well as silica immobilized oxo-vanadium Schiff base for the hydroxylation of benzene with hydrogen peroxide.     

Synthesis of Al-SBA-15 and Its Application in Cobalt Based Fischer–Tropsch Synthesis

Kinetics and Catalysis - Three types of Al-SBA-15 were synthesized with vapor induced internal hydrolysis, impregnation and template methods and then utilized as supports for 15 wt % Co...     

基于多金属氧酸盐的介孔离子催化剂催化苯一步氧化制苯酚（英文）

苯酚是一种重要的有机化工原料,工业上主要采用合成路线长、原子利用率低、能耗高、环境污染严重的异丙苯法生产.当前,随着绿色化学的普及,H_2O_2催化苯一步氧化制苯酚受到越来越多的关注.在研究的众多催化剂中,钒取代杂多酸被认为是该反应最有效的催化剂之一.然而,纯杂多酸易溶于H_2O_2催化的苯羟基化反应体系,导致污染严重、后处理和分离困难.为了获得可回收的固体杂多酸催化剂,通常将其负载于多孔载体上,但这种方法常伴随着活性组分易溶脱,反应速率慢等缺点.因此,在H_2O_2催化苯一步氧化制苯酚体系中获得高效、可重复使用的杂多酸基固体催化剂仍然是一个挑战.采用有机单元修饰杂多酸是制备杂多酸基固体催化剂的有效方法.研究表明,有机基团的引入可以有效调控杂多酸的溶解性和氧化还原性.另一方面,催化剂中的疏水微环境也能有效促进非极性底物与催化活性中心的相互作用,提高反应速率,改善催化活性.因此,我们通过离子交换法将对二甲苯型双核咪唑离子液体阳离子与含钒杂多阴离子结合,研究制备了一种具有疏水微环境的介孔杂多酸基离子固体催化剂.采用傅里叶变换红外光谱、X射线衍射、扫描电镜、N2吸附-脱附和CHN元素分析等表征手段对催化剂进行全面分析.结果表明,该催化剂是一种具有较高比表面积的半无定形疏水有机杂多酸盐.在H_2O_2催化的苯一步氧化制苯酚反应中引导了液-固两相催化体系,在反应时间1 h,反应温度70 oC,苯酚产率可达到28.9%,与均相纯杂多酸的催化活性基本相当,且催化剂重复使用性能良好.催化剂构效关系和反应动力学研究表明,高比表面积和疏水微环境的构建加快了苯与催化活性中心的相互作用,提高了催化反应速率和产物选择性.同时,咪唑基离子液体阳离子通过分子内的电子相互作用改善了杂多阴离子的氧化还原能力,也赋予固体催化剂更高的催化活性.该研究为H_2O_2催化苯一步氧化制苯酚反应提供了一种制备简单,经济高效,可重复使用的杂多酸基固体催化剂.     

One-step direct synthesis of mesoporous aluminosilicates Al-SBA-15 with cage-like macropores by using micrometer-sized aluminum balls

Ordered mesoporous aluminosilicate Al-SBA-15 materials with cage-like macropores have been synthesized by using micrometer-sized aluminum balls as an Al source, tetraethyl orthosilicate (TEOS) as a silica source, and triblock copolymer Pluronic P123 as a template. The resulting materials were fully characterized by XRD, N₂ adsorption, SEM, TEM, ICP-AES, and ²⁷Al MAS-NMR. The products (Al-SBA-15) have ordered two-dimensional (2-D) hexagonal mesostructures (space group p6mm). The calcined Al-SBA-15 materials exhibit disordered macropores with diameters of about 70–80 nm and ordered mesopores with a diameter of ∼5 nm, a BET surface area of about 500 m²/g, Si/Al ratio of 40–80, and a ratio of tetrahedral Al to octahedral Al sites of about 2:1. This combination of properties gives these materials potential applications in areas such as adsorption, catalysis and separation. Supported by the National Natural Science Foundation of China (Grant Nos. 20890123 & 20721063), Shanghai Science & Technology Committee (08DZ2270500), and Shanghai Leading Academic Discipline Project (No.B108)     

Triethylamine-modified Keggin heteropolyacid: a novel phase-transfer catalyst for hydroxylation of benzene with H2O2

The Keggin-structured heteropolyacid H₄PMo₁₁VO₄₀ and its triethylamine-modified derivative [(C₂H₅)₃NH]₄PMo₁₁VO₄₀ were prepared and characterized by FT-IR and UV–visible spectrometry, and elemental analysis. Direct hydroxylation of benzene to phenol by H₂O₂ over these two catalysts was then compared. The effect of the triethylamine in [(C₂H₅)₃NH]₄PMo₁₁VO₄₀ on the catalytic hydroxylation of benzene was investigated in detail. The results showed that although the triethylamine-modified catalyst is not significantly more active than the parent heteropolyacid catalyst, its reaction-controlled phase-transfer characteristics enable easy separation of the catalyst from the reaction medium, and its reuse, suggesting its potential for application to the hydroxylation of benzene to phenol with H₂O₂.     

Preparation and characterization of vanadium(IV) oxide supported on SBA-15 and its catalytic performance in benzene hydroxylation to phenol using molecular oxygen

Preparation of dispersed transition metal oxides catalyst with low oxidation state still remains a challenging task in heterogeneous catalysis.In this study,vanadium oxides supported on zeolite SBA-15 have been prepared under hydrothermal condition using V 2 O 5 and oxalic acid as sources of vanadium and reductant,respectively.The structures of samples,especially the oxidation state of vanadium,and the surface distribution of vanadium oxide species,have been thoroughly characterized using various techniques,including N 2-physisorption,X-ray diffraction(XRD),transmission electron microscopy(TEM),X-ray photoelectron spectroscopy(XPS),UV-visible spectra(UV-Vis) and UV-visible-near infrared spectra(UV-Vis-NIR).It is found that the majority of supported vanadium was in the form of vanadium(IV) oxide species with the low valence of vanadium.By adjusting hydrothermal treatment time,the surface distribution of vanadium(IV) oxide species can be tuned from vanadium(IV) oxide cluster to crystallites.These materials have been tested in the hydroxylation of benzene to phenol in liquid-phase with molecular oxygen in the absence of reductant.The catalyst exhibits high selectivity for phenol(61%) at benzene conversion of 4.6%,which is a relatively good result in comparison with other studies employing molecular oxygen as the oxidant.     

一步由微米铝球直接合成含笼状大孔的Al-SBA-15

以微米铝球为铝源,正硅酸乙酯(TEOS)为硅源,聚醚三嵌段聚合物P123为模板剂,在酸性水溶液中,一步直接合成含有笼状大孔的介孔氧化硅(铝)分子筛Al-SBA-15.用透射电子显微镜(TEM)、扫描电子显微镜(SEM)、27Al固体核磁(27AlMAS-NMR)、ICP发射光谱仪、X射线衍射(XRD),以及低温N2吸/脱附对样品进行了表征.结果表明,得到的材料是二维六方结构(空间群p6mm)的Al-SBA-15,经过550℃焙烧后,Al-SBA-15的比表面积大约为500m2/g,Si/Al比在40～80之间,四配位铝/六配位铝之比约为2,结构中存在约70～80nm的笼型大孔和约为5nm的介孔.     

奎宁-杂多酸杂化催化剂催化H2O2为氧源的苯羟基化反应

将奎宁与Keggin结构磷钼钒杂多酸结合制备出一种新颖的多相苯羟基化杂化催化剂, 采用傅里叶变换红外光谱、紫外-可见光谱、X射线衍射、扫描电镜、热重、N₂吸附-脱附和CHN元素分析等表征手段对催化剂进行了分析. 结果表明, 该催化剂是一种具有较高比表面积和孔体积的半无定形有机杂多酸盐. 在H₂O₂为氧源的苯羟基化反应中, 杂化催化剂引导了液-固两相催化体系, 表现出较高催化活性和重复使用稳定性. 催化剂中奎宁与杂多阴离子间的氢键和电子相互作用赋予了其高熔点和难溶性, 而高比表面积和因奎宁而改善的杂多阴离子的氧化还原性是其获得优异催化性能的主要原因. 这为多相苯羟基化反应提供了一种新的且制备便捷的基于多金属氧酸盐的高效催化剂.