具有高灵敏性且稳定可重复的正温度系数效应的PVDF/CF导电复合材料

以碳纤维(CF)为填料,聚偏氟乙烯(PVDF)为基体,通过熔融共混法制备PVDF/CF导电复合材料.所得复合材料具有显著的正温度系数(PTC)效应,温度上升到聚合物熔点附近时,电阻率对温度变化敏感.在转折温度区间(155.5~171.0oC,(35)(28)15.5oC)内,其体积电阻率的增加速率约为1.3×105?cm K-1.在不同CF含量下,复合材料表现出不同的PTC行为.随着CF含量的增加,其峰值电阻略有下降.高导电粒子含量下,无负温度系数(NTC)效应.在冷却循环过程,导电网络的重构性良好.复合材料即使经过多次热循环,依然表现出良好的PTC特性重现性.     

乙烯类聚合物-炭黑复合物的PTC效应

本文以低密度聚乙烯(LDPE)和乙烯-醋酸乙烯酯共聚物(EVA)为基材,炭黑(CB)为导电微粒,探讨了聚合物-炭黑复合物的结构对正温度系数效应(PTC)增强与减弱的影响和炭黑含量与PTC效应的关系以及交联结构对PTC现象的稳定作用.     

改性CF与EVA复合材料的PTC行为研究

试图通过增强EVA与CF之间的相互作用来消除NTC现象. 由于CF表面光滑, 惰性大, 将CF用KMnO4表面氧化后与具有活性官能团的EVA熔融共混, 得到EVA-改性CF复合物.     

聚乙烯/碳纤维复合材料的PTC效应

近几年 ,由导电粒子 (如碳黑、碳纤维、金属和金属氧化物等 ) [1～ 3] 填充结晶或半结晶型聚合物的导电复合材料备受人们关注 ,并逐渐得到了开发与利用 .其中有一类功能材料 ,随温度的升高 ,相继呈现正温度系数 (PTC)和负温度系数 (NTC)效应[4～ 8] .这类材料广泛应用于发热体制造、抗静电、过电流保护和电磁屏蔽等领域 .长期以来 ,以碳黑填充聚合物的 PTC效应报道得较多 .近年来 ,以碳纤维为填料或部分填料的高聚物复合材料的 PTC效应 [9～ 11]开始引起了人们的兴趣和关注 .本文着重讨论了碳纤维的加入对聚合物结晶形态的影响以及γ射…     

Resistivity-Temperature Behavior of CB-Filled HDPE Foaming Composites

High-density polyethylene/carbon black foaming conductive composites were prepared from acetylene black（ACEY） and super conductive carbon black（HG-1P） as conductive filler, low-density polyethylene（LDPE） as the second component, ethylene-vinyl acetate（EVA） and ethylene propylene rubber（EPR） as the third component, azobisformamide（AC） as foamer, and dicumyl peroxide（DCP） as cross-linker. The structure and resistivity-temperature behavior of high-density polyethylene（HDPE）/CB foaming conductive composites were investigated. Influences of carbon black, LDPE, EVA, EPR, AC, and DCP on the foaming performance and resistivity-temperature behavior of HDPE/CB foaming conductive composites were also studied. The results reveal that HDPE/CB foaming conductive composite exhibits better switching characteristic; ACET-filled HDPE foaming conductive composite displays better positive temperature coefficient（PYC） effect; whereas super conductive carbon black（HG-1P）-filled HDPE foaming conductive composite shows better negative temperature coefficient（NTC） effect.     

Enhanced Reproducibility of Positive Temperature Coefficient Effect of CB/HDPE/PVDF Composites with the Addition of Ionic Liquid

Developing an effective method for improving the reproducibility of positive temperature coefficient(PTC) effect is of great significance for large-scale application of polymer based PTC composites, owing to its contribution to the security and reliability. Herein, we developed a carbon black(CB)/high density polyethylene(HDPE)/poly(vinylidene fluoride)(PVDF) composite with outstanding PTC reproducibility, by incorporating 1-octyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide([OMIm][NTf_2]) into the composite. After multiple repeated temperature cycles, the PTC performance of as-prepared material keeps almost unchanged and the varition of resistance at room temperature is less than 7%. Our studies revealed that [OMIm][NTf2] contributes to the improvement of PTC reproducibility in two ways:(i)it acts as an efficient plasticizer for refining the co-continuous phase morphology of HDPE/PVDE blends;(ii) it inhibits the crystallization of PVDF through the dilution effect, leading to more overlaps of the volume shrinkage process of HDPE and PVDF melt which results in the decrease of interface gap between HDPE and PVDF. This study demonstrated that ionic liquids as the multifunctional agents have great potential for improving the reproducibility in the application of the binary polymer based PTC composites.     

聚乙烯/聚并苯复合材料室温电阻率变化规律研究

以新型导电材料聚并苯替代碳黑作为导电填料制备聚乙烯/聚并苯复合物.确定了复合物渗流转变区,并解释渗流转变现象的产生机理.从聚并苯含量和热处理过程,对聚乙烯/聚并苯复合物室温电阻率变化规律进行讨论.结果表明,聚并苯质量分数在20%～40%之间是聚乙烯/聚并苯复合物渗流转变区;热处理有利于聚乙烯晶区完善排列,也有利于导电链形成;以聚并苯作为导电填料所制备的复合物具有较高的PTC强度;辐射交联可以提高聚乙烯/聚并苯复合物PTC强度,抑制NTC效应.     

Percolation behaviour of ultrahigh molecular weight polyethylene/multi-walled carbon nanotubes composites

The electrical conductivity of polymer/multi-walled carbon nanotubes (MWCNTs) composites in a powder and in a hot-pressed compacted state, prepared by mechanical mixing, was studied. The semicrystalline ultrahigh molecular weight polyethylene (UHMWPE) was used as a polymer matrix. The data clearly evidence the presence of a percolation threshold φ_c at a very small volume fraction of the MWCNTs φ in a polymer matrix, φ_c ≈ 0.0004-0.0007. The ultralow percolation threshold in UHMWPE/MWCNTs thermoplastic composites was explained by high aspect ratio of the nanotubes and their segregated distribution inside the polymer matrix. The method of composite preparation effects the values of percolation threshold concentration φ_c and critical exponent t. A noticeable positive temperature coefficient of resistivity (PTC effect) was observed in the region of temperatures higher than melting point. It was explained by influence of thermal expansion of the polymer matrix and independence from the melting process that is a result of specific structure of conductive phase.     

短碳纤维填充HDPE复合体系的渗流网络与压阻行为

研究了短碳纤维(Shortcarbonfiber,SCF)填充高密度聚乙烯(HDPE)导电复合体系的渗流(Percola-tion)与压阻行为(Piezoresistivebehavior,PRB),发现SCF经物理接触而形成的导电网络是复合材料导电的根源.体系的压阻行为呈现浓度依赖性.受压时SCF间隙的减小与渗流网络的局部破坏-重建过程随填料浓度、载荷大小和力学循环次数的变化而变化,导致PRB表现为电阻负压力系数(NPC)、电阻正压力系数(PPC)或两者兼有的现象.讨论了体系PRB的稳定性,发现由于HDPE基体的塑性永久形变,电阻-时间基线随着压缩循环的进行而发生漂移,多次循环可有效提高体系的压阻稳定性.     

高密度聚乙烯/石墨导电复合物的PTC行为及其热循环稳定性

研究了高密度乙烯／石墨导电复合物的PTC行为及其影响因素,揭示了内应力随温度升高而松驰对PTC效应的贡献。复合物的导电性能与PTC行为是电导网络的总体结构及其随温度的变化所决定的,与材料组分性质以及各组分之间的相互作用关系不大。当环境温度趋于基体熔点时,复合物热学性质的变化造成导电网络的大规模破坏,是PTC行为产生的根源。热处理等物理手段可改变导电网络的微观结构,但不影响PTC行为赖以产生的物理机制,也不能有效改善PTC行为的热循环稳定性。     

PDA/PVDF紫外线屏蔽复合膜的制备及性能表征

利用多巴胺在溶液中自聚得到聚多巴胺(PDA)颗粒, 然后将其作为填料加入聚偏氟乙烯(PVDF)中, 采用溶液成膜法制备具有紫外线屏蔽功能的PDA/PVDF复合膜. 通过傅里叶变换红外光谱(FTIR)、 扫描电子显微镜(SEM)和紫外可见分光光度计(UV-Vis)对制备的PDA颗粒的结构、 形貌以及吸光度进行表征, 并且进一步利用X 射线衍射仪(XRD)、 差示扫描量热仪(DSC)、 热失重分析仪(TGA)、 接触角测量仪(CA)以及紫外老化箱等对PDA/PVDF复合膜的结构、 热性能、 润湿性能与紫外线屏蔽性能进行测试. 结果表明, 制备的PDA颗粒的粒径约为160 nm; 掺杂PDA之后的PVDF膜的结晶度以及接触角均减小; 并且PDA质量分数为5%时得到的PDA/PVDF复合膜在200400 nm范围内的透过率均低于1%, 能够吸收所有的紫外线, 表现出优异的紫外线屏蔽功能.     

Infrared spectroscopic studies on crystalline phase transition of PVDF and PVDF/hyperbranched polyester blend ultrathin films

In this study, as cast (AC, at 30 °C) and annealed (AN, at 130 °C, 3 h) samples of polyvinylidene fluoride (PVDF) and PVDF/hyperbranched polyester (HBP) (90/10) blend ultrathin films were subjected to heating-cooling (30 → 210 → 30 °C) cycle, and studied for their changes in crystalline phase transition behavior using in-situ Fourier transform infrared-transmission spectroscopy (FTIR-TS) and grazing incident reflection absorption spectroscopy (FTIR-GIRAS) techniques. Factor analysis was employed to extract the pure crystalline and amorphous spectra as well as the percentage content of ferroelectric crystallinity for both the samples. Irrespective of the thermal treatment (AC or AN) and spectral measurement (FTIR-TS or GIRAS) techniques, neat PVDF sample exhibited irreversible phase transitions during heating-cooling cycle associated with the transformation from ordered β-crystalline (1276 cm⁻¹) into disordered amorphous (1234 cm⁻¹) form. Interestingly, annealed PVDF/HBP blend sample measured using FTIR-GIRAS exhibited reversible crystalline phase transition behavior similar to a ‘dipole memory effect’ even after heating to 210 °C (>T_m) and then cooled to 30 °C. Compared to neat PVDF, higher ferroelectric crystallinity and reversible phase transition in PVDF/HBP blend may be attributed to (i) the existence of H-bonding between HBP (CO and OH groups) and PVDF (CH₂ and CF₂) and/or (ii) HBP acting as a nanoparticle in PVDF matrix.     

填充碳纳米管/石墨的复合型电磁波屏蔽膜

介绍一种填充碳纳米管/石墨的复合型电磁波屏蔽膜的组成、制备及其耐老化性能,实验发现：当碳纳米管/石墨的配比为1/7～1/2、有机聚合物/导电填料的配比为29.6/70.4～32.4/67.6时,该屏蔽膜具有最佳的电性能、屏蔽性能和加工性能,且在一定条件下具有负的温度系数。用多层结构模型讨论了该屏蔽膜的导电性,并与铜、镍蒸发膜的屏蔽特性进行了比较。     

炭黑／SBS／橡胶复合材料的电学性能

用炭黑填充ＳＢＳ／橡胶制备导电复合材料。研究了复合材料的导电性、电阻率随温度变化的特性。讨论了炭黑填充率、炭黑结构和性质以及ＳＢＳ对复合材料导电性和电阻率－温度特性的影响。实验结果指出，使用中等结构炭黑（Ｎ５５０）填充ＳＢＳ／橡胶共混基体可获得一定强度的ＰＴＣ复合材料；适量填充ＳＢＳ可改善ＳＢＳ／橡胶复合材料的高温ρ￣Ｔ特性，硫化ＳＢＳ／ＳＢＲ可减轻其滞后性。     

P[MMA-IL]修饰石墨烯协同调控PVDF复合物结晶与介电行为

为改善石墨烯(Gra)在聚偏氟乙烯(PVDF)中的分散性和界面性质,以甲基丙烯酸甲酯(MMA)和1-乙烯基-3-乙基咪唑溴盐(IL)为单体合成P[MMA-IL]共聚物,用于修饰石墨烯(Gra),并通过溶液共混、热压法制备PVDF/PMMA、PVDF/P[MMA-IL]、PVDF/PMMA/Gra和PVDF/P[MMA-IL]/Gra复合薄膜.采用Raman光谱、场发射扫描电子显微镜(FESEM)、傅里叶变换反射红外光谱分析仪(FTIR-ATR)、X射线衍射仪(XRD)、偏光显微镜(POM)、示差扫描量热仪(DSC)和电感电容电阻测试仪(LCR)对复合薄膜的结构形态、结晶与介电行为进行表征和分析.Raman光谱表明P[MMA-IL]与Gra之间存在强相互作用;FESEM照片显示P[MMAIL]能够促进Gra在基体中的分散;DSC、XRD和FTIR-ATR数据表明PMMA降低PVDF的结晶温度,PMMA和Gra未能诱导出?-PVDF极性晶体,而单独的P[MMA-IL]会通过咪唑阳离子-偶极子作用诱导?-PVDF晶体;通过咪唑阳离子-π强相互作用,P[MMA-IL]在模板剂Gra表面进行修饰,协同诱导作用增强.POM照片表明?-PVDF晶体在生长过程中,MMA链段会嵌入到球晶的晶片空隙中,引起结构疏松;离子-偶极子和IL成核作用导致?-PVDF晶体尺寸较小,结晶较快.介电行为研究表明PMMA及其修饰Gra降低PVDF的结晶度和链浓度,导致界面极化和取向极化较弱,介电响应较弱;而P[MMA-IL]修饰Gra诱导的?-PVDF晶体、以及IL链段在界面的离子极化使得界面极化作用增强,介电响应增强.     

熔融纺丝-拉伸法制备PVDF中空纤维膜及其油-水分离性能

以聚偏氟乙烯(PVDF)为成膜聚合物, 聚全氟乙丙烯(FEP)为添加剂, 聚乙二醇(PEG)和氯化钙(CaCl₂)为复合成孔剂, 采用熔融纺丝-拉伸法制备了PVDF中空纤维膜. 在制膜过程中未使用其它溶剂和稀释剂, 实现了制膜过程的相对绿色化. 分析和讨论了拉伸比对PVDF中空纤维膜结构与性能的影响, 测试了纤维膜的孔径分布、 力学性能和油-水分离性能等. 结果表明, 进行拉伸后处理的膜的孔径分布较窄, 在油包水乳液分离测试中, 分离效率均在97%以上, 表现出良好的油-水分离效果.     

碳纤维表面酰氯化及其与尼龙6的接枝Ⅱ、碳纤维接枝复合材料CF/PA6的等温结晶和熔融行为

碳纤维表面酰氯化及其与尼龙6的接枝Ⅰ、碳纤维接枝复合材料CF/PA6的等温结晶和熔融行为;阴离子接枝;碳纤维/尼龙6复合材料     

三元复合材料PANI／Ag／MWNT的电化学行为和比电容

通过原位聚合的方式在银纳米粒子/多壁碳纳米管（Ag/MWCNT）复合材料的表面成功聚合苯胺单体制备了聚苯胺/银纳米粒子/多壁碳纳米管（PANI/Ag/MWCNT）三元复合材料苯．通过对三元复合材料的结构以及表面形貌进行分析,表明聚苯胺层完全包覆了Ag/MWCNT复合材料,形成了核壳式结构．同时银纳米粒子则以单质晶体的形态存在于多壁碳纳米管与聚苯胺层之间．三元复合材料电极在1 mol/L的KOH溶液中具有极低的阻抗,而与聚苯胺电极相比,这些复合材料电极则表现出更低的电阻、更高的电化学活性和更好的循环稳定性．尤其是当苯胺和Ag：MWCNTs质量比为5：5时,该复合材料电极在0.25 A/g的电流密度下表现出最大的比电容值为160 F/g．     

聚氯乙烯/炭黑导电复合体系的压阻行为

研究了聚氯乙烯/炭黑(PVC/CB)导电复合体系在单轴压力作用下的压阻行为,发现CB含量对电阻-机械响应具有显著的影响.当CB含量低于渗流阈值时,PVC/CB复合材料呈现PPC效应;而高于渗流阈值时,呈现NPC效应.在渗流阈值附近,单轴压缩可诱导NPC效应的出现,或者抑制PPC效应.     

高填充可降解淀粉基聚烯烃材料的制备及其堆肥降解

制备了高填充的聚乙烯（PE）-淀粉-碳酸钙（CaCO3）三元复合材料,根据ASTM D6400标准对该材料进行了堆肥降解。采用熔体流动速率（MFI）、差示扫描量热分析（DSC）、扫描电镜分析（SEM）等方法研究了该复合材料的堆肥降解行为。结果表明：堆肥降解过程中,熔体流动速率（MFI）在堆肥1个月左右出现极小值;降解过...