Synthesis and preliminary cytotoxicity studies of achiral pyrrolyl-substituted titanocenes

From the reaction of various 6-pyrrolylfulvenes (3a–3d) with Super Hydride (LiBEt₃H), lithiated cyclopentadienide intermediates (4a–4d) were synthesised. These intermediates were then transmetallated with titanium tetrachloride TiCl₄ to yield the pyrrolyl-substituted titanocenes bis-[((1-(4-methoxybenzyl)-pyrrole)2-)cyclopentadienyl]titanium(IV) dichloride (5a), bis-[((1-(4-methoxyphenyl)-pyrrole)2-)cyclopentadienyl]titanium(IV) dichloride (5b), bis-[((2,4-bis(4-methoxyphenyl)-1-methyl-pyrrole)2-)cyclopentadienyl]titanium(IV) dichloride (5c), bis-[((2-(4-methoxyphenyl)-1-methyl-pyrrole)2-)cyclopentadienyl]titanium(IV) dichloride (5d). Titanocene 5b crystallised and was characterised by X-ray crystallography. The four titanocenes 5a–5d were tested for their cytotoxicity through MTT-based in vitro tests on CAKI-1 cell lines in order to determine their IC₅₀ values. Titanocenes 5a–5d were found to have IC₅₀ values of 440 (±35), 68 (±14), 105 (±30), and 36 (±7) μM.     

Benzyl-substituted titanocene dichloride anticancer drugs: From lead to hit

Through the reaction of Super Hydride (LiBEt₃H) with 6-phenyl-substituted fulvenes followed by transmetallation to TiCl₄ ten novel benzyl-substituted titanocene dichloride derivatives were synthesised. 6(4-morpholinomethyl-phenyl) fulvene (6g) and (bis-[(4-methoxymethyl-benzyl)cyclopentadienyl]titanium(IV) dichloride) (8a) were characterised by single crystal X-ray diffraction. All of the titanocenes had their cytotoxicity investigated through preliminary in vitro testing on the LLC-PK (pig kidney epithelial) cell line and CAKI-1 human kidney cell human carcinoma cell line in an MTT based assay in order to determine their IC50 values. The titanocenes synthesised were found to have IC50 values ranging from 2.3 (±0.3) μM (comparable to cisplatin) to others which show no anti-proliferative activity on this cell line in standard DMSO formulations on LLC-PK cell line. Eight of the titanocenes were found to be completely water-soluble and had IC50 values of 6.5 (±0.7) μM to no activity when using medium only for formulation. On the CAKI-1 cell line, IC50 values of 7.8 (±1.4) μM to no activity were found using DMSO formulation, while IC50 values of 0.55 (±0.32) μM to no activity were measured using just medium as the formulation reagent. Some of the titanocenes show significant cytotoxicity improvement when compared directly to the lead compound Titanocene Y (bis-[(p-methoxybenzyl)cyclopentadienyl] titanium(IV) dichloride) and are more cytotoxic than cisplatin. Bis-[(4-diethylaminomethyl-benzyl)cyclopentadienyl]titanium(IV) dichloride (8d) at this preliminary stage seems to be the most promising of the ten compounds prepared and exhibits nanomolar activity against CAKI-1.     

Novel zirconocene anticancer drugs?

From the reaction of Super Hydride (LiBEt₃H) with 6-(4-methoxyphenyl) fulvene (1a), 6-(2-fluoro-4-methoxyphenyl) fulvene (1b), and 6-(4-N,N-dimethylaminophenyl) fulvene (1c) lithiated cyclopentadienide intermediates (2a-c) were synthesised. These intermediates were then transmetallated to zirconium with ZrCl₄ to give benzyl-substituted zirconocenes bis-[(4-methoxybenzyl)cyclopentadienyl] zirconium(IV) dichloride (3a), bis-[(2-fluoro-4-methoxybenzyl)cyclopentadienyl] zirconium(IV) dichloride (3b) and bis-[(4-N,N-dimethylaminobenzyl)cyclopentadienyl] zirconium(IV) dichloride (3c). All three zirconocenes were characterised by single crystal X-ray diffraction and preliminary in vitro cell tests were performed with the zirconocene derivatives on the LLC-PK cell line in order to determine their cytotoxicity. Zirconocenes 3b and 3c did not show cytotoxicity up to a concentration of 170 μM, while 3a exhibited an IC50 value of 57 μM against LLC-PK.     

Synthesis and cytotoxicity studies of new dimethylamino-functionalised and heteroaryl-substituted titanocene anti-cancer drugs

From the carbolithiation of N,N-dimethylamino fulvene (3a) and different ortho-lithiated heterocycles (furan, thiophene and N-methylpyrrole), the corresponding lithium cyclopentadienide intermediate (4a-c) was formed. These three lithiated intermediates underwent a transmetallation reaction with TiCl₄ resulting in dimethylamino-functionalised titanocenes 5a-c. When these titanocenes were tested against LLC-PK cells, the IC₅₀ values obtained were of 240, and 28 μM for titanocenes 5a and 5b, respectively. The most cytotoxic titanocene 5c with an IC₅₀ value of 5.5 μM is found to be almost as cytotoxic as cis-platin, which showed an IC₅₀ value of 3.3 μM, when tested on the LLC-PK cell line, and titanocene 5c is approximately 400 times better than titanocene dichloride itself.     

Novel titanocene anti-cancer drugs derived from fulvenes and titanium dichloride

Starting from 6-(p−N,N-dimethylanilinyl)fulvene (1a) or 6-(pentamethylphenyl)fulvene (1b) [1,2-di(cyclopentadienyl)-1,2-di(p−N,N-dimethylaminophenyl)ethanediyl] titanium dichloride (2a) and [1,2-di(cyclopentadienyl)-1,2-bis(pentamethylphenyl)ethanediyl] titanium dichloride (2b) and their corresponding dithiocyanato complexes (3a, 3b) were synthesized. Titanocene 2b did not show a cytotoxic effect, but when 2a was tested against pig kidney carcinoma cells (LLC-PK) or human ovarian carcinoma cells (A2780/cp70) inhibitory concentrations (IC₅₀) of 2.7 × 10⁻⁴ and 1.9 ×  10⁻⁴ M, respectively, were observed.     

Novel benzyl-substituted vanadocene anticancer drugs

From the reaction of 6-(p-methoxyphenyl) fulvene (1a), 6-(3,4-dimethoxyphenyl) fulvene (1b) and 6-(3,4,5-trimethoxyphenyl) fulvene (1c) with LiBEt₃H, lithiated cyclopentadienide intermediates (2a–c) were synthesised. These intermediates were then transmetallated to vanadium with VCl₄ to yield the benzyl-substituted vanadocenes bis-[(p-methoxybenzyl)cyclopentadienyl] vanadium(IV) dichloride (3a), bis-[(3,4-dimethoxybenzyl)cyclopentadienyl] vanadium(IV) dichloride (3b), and bis-[(3,4,5-trimethoxybenzyl)cyclopentadienyl] vanadium(IV) dichloride (3c). The two vanadocenes 3a and 3c were characterised by single crystal X-ray diffraction. All three vanadocenes had their cytotoxicity investigated through MTT based preliminary in vitro testing on the LLC-PK (pig kidney epithelial) cell line in order to determine their IC50 values and compare them with the corresponding titanocene dichloride derivatives. Vanadocenes 3b–c were found to have IC50 values of 9.1 and 8.3 μM, while 3a showed a superior value of 3.0 μM, respectively.     

Syntheses of methylene-bridged ansa-zirconocene complexes and copolymerization studies of ethylene and norbornene

Methylene-bridged ansa-metallocene complexes bearing substituents on the cyclopentadienyl (Cp) and fluorenyl (Flu) moieties, namely methylene[9-(2,7-di-tert-butyl)fluorenyl(2-(1,3-dimethylcyclopentadienyl))]zirconium dichloride (1a) and its analogue, methylene[(9-(2,7-di-tert-butyl)fluorenyl(2-(1-methyl-3-phenyl)cyclopentadienyl))]zirconium dichloride (2a), have been prepared from (2,7-di-tert-butyl)-9-prop-2-ynyl-9H-fluorene (2). This procedure includes the use of 3-bromo-1-propyne which affords the methylene bridging unit by way of an intermolecular Pauson-Khand reaction in which norbornadiene and a pendant alkyne cyclize to form a ring that later becomes a substituted cyclopentadienyl group. Ethylene-norbornene (E-N) copolymerization was then carried out using these new complexes (1a and 1b) in the presence of methylaluminoxane (MAO) as a cocatalyst; these activities can be compared to that of isopropylene[9-fluorenyl-cyclopentadienyl]zirconium dichloride (3a). The activity of catalyst 1a was comparable to that of 3a but much higher than that of 2a. In addition, 1a shows higher norbornene insertion performance, and gives an E-N copolymer with a higher glass transition temperature (T_g) than 2a under identical conditions; both 1a and 2a give a lower T_g polymer than 3a does.     

Synthesis and characterization of titanium and zirconium complexes with silicone-bridged phenoxycyclopentadienyl ligands

Dimethylsilyl(2,3,4,5-tetramethylcyclopentadienyl)(3-tert-butyl-5-methyl-2-phenoxy)titanium dichloride (1a), a useful catalyst precursor for olefin copolymerization, was synthesized at high yield starting from allyl-protected phenolic ligand 3a,which was first treated with 2 equiv. of n-BuLi to selectively give the dilithium salt of 3a along with 1-heptene, a coupling product of a protected allyl ether moiety and butyl anion. Addition of TiCl₄ to the resulting dilithium salt of 3a in toluene afforded 1a in 50% isolated yield. This methodology could be applied to the preparation of related titanium and zirconoium complexes 1b-1d, 8 with silicone-bridged Cp-phenoxy ligands, whereas the reaction starting from methyl-protected precursor 2a did not produce the zirconium complex 8. Copolymerization of ethylene and 1-hexene with the newly prepared complexes was also investigated.     

Fulvalenediyl-bridged heterobimetallic complexes consisting of sandwich and half-sandwich compounds with early-late transition metals

A straightforward synthesis methodology for the preparation of heterobimetallic [(η⁵-C₅H₅)(η⁵-C₅H₄-C₅Me₄)M] (3a, M = Fe; 3b, M = Ru) and [(η⁵-C₅H₅)((μ-η⁵:η⁵-C₅H₄-C₅Me₄)TiCl₃)M] (4a, M = Fe; 4b, M = Ru) in which early and late transition metals are connected by a fulvalenediyl bridge is reported.The structures of molecules 3b and 4a in the solid state are discussed. Most noteworthy in 4a is the exo arrangement of the iron and titanium atoms coordinated by the fulvalenediyl unit which itself is twisted with a dihedral angle between the joined cyclopentadienyl rings of 19.33(9)°. Electrochemical, UV/Vis/NIR spectroscopic and spectroelectrochemical experiments on 4a and Cp∗TiCl₃, for comparison, provide evidence for some transfer of electronic information between the conjoined ferrocene and half-sandwich titanocene trichloride subunits of 4a. Evidence comes from systematic potential shifts and the presence of a fairly intense Fe → Ti charge-transfer absorption band that vanishes upon oxidation and reduction of 4a.     

Synthesis and characterization of phosphorous-bridged bisphenoxy titanium complexes and their application to ethylene polymerization

Phosphorous-bridged bisphenoxy titanium complexes were synthesized and their ethylene polymerization behavior was investigated. Bis[3-tert-butyl-5-methyl-2-phenoxy](phenyl)phosphine tetrahydrofuran titanium dichloride (4a) was obtained by treatment of 3 equiv of n-BuLi with bis[3-tert-butyl-2-hydroxy-5-methylphenyl](phenyl)phosphine hydrochloride salt (3a) followed by TiCl₄(THF)₂ in THF. THF-free complexes 5a-5d were synthesized more conveniently by the direct reaction of MOM-protected ligands (2a-2d) with TiCl₄ in toluene. X-ray analysis of 4a revealed that the ligand is bonded to the octahedral titanium (IV) center in a facial fashion and two chlorine atoms possess cis-geometry. Complexes 4a and 5a-5d were utilized as catalyst precursors for ethylene polymerization. Complex 5c gave high molecular weight polyethylene (M_w = 1,170,000, M_w/M_n = 2.0) upon activation with Al(ⁱBu)₃/[Ph₃C][B(C₆F₅)₄] (TB). Ethylene polymerization activity of 5d activated with Al(ⁱBu)₃/TB reached 49.0 × 10⁶ g mol (cat) ⁻¹ h⁻¹.     

Novel titana-2,4-cyclopentadienes by 1,1-alkylboration

Bis(trimethylsilyl)amino-(2,2,5,5-tetramethyl-1,2,5-azadisila-cyclopent-1-yl)-titanium dichloride (3) and bis(2,2,5,5-tetramethyl-1,2,5-azadisila-cyclopent-1-yl)-titanium dichloride (4) were prepared and converted into the di(1-alkynyl)titanium derivatives, (Me₃Si)₂N[(CH₂Me₂Si)₂N]Ti(CCR)₂ (5) and [(CH₂Me₂Si)₂N]₂Ti(CCR)₂ (6) [R=Me (a), Ph (b), SiMe₃ (c)]. The reaction of 5a and 5b with trialkylboranes such as Et₃B leads almost quantitatively to titana-2,4-cyclopentadienes 7a and 7b, in which a diethylboryl group functions as a substituent in 3-position. In the same manner, 6b reacts with Et₃B or Pr₃B to titana-2,4-cyclopentadienes 8b or 9b, respectively. It is proposed that these reactions proceed by 1,1-alkylboration. Compound 5c also reacts with Et₃B, however, a complex mixture was obtained. All products were characterised by ¹H-, ¹¹B-, ¹³C-, ¹⁵N- and ²⁹Si-NMR spectroscopy.     

Novel organotin antibacterial and anticancer drugs

From the reaction of 6-(p-methoxyphenyl) fulvene (1a), 6-(p-N,N-dimethylaminophenyl) fulvene (1b) and 6-(3,4-dimethoxyphenyl) fulvene (1c) with LiBEt₃H, lithiated cyclopentadienide intermediates (2a–c) were synthesised. These intermediates were then transmetallated to tin with SnCl₄ to yield tetra-substituted bis(cyclopentadienyl)tin dichloride complexes (3a–c). Further reaction with tin tetrachloride yielded the benzyl-substituted derivatives bis-[(p-methoxybenzyl)cyclopentadienyl] tin(IV) dichloride (4a), bis-[(p-N,N-dimethylaminobenzyl)cyclopentadienyl] tin(IV) dichloride (4b), and bis-[(3,4-dimethoxyphenyl)cyclopentadienyl] tin(IV) dichloride (4c). Preliminary antibacterial tests were carried out using the Kirby–Bauer disk-diffusion method, in which 4a–c showed little to no activity against the Gram-negative bacterium Escherichia coli, but medium activity against Gram-positive bacteria (MRSA, MSSA). In addition, the organotin complexes had their cytotoxicity investigated through preliminary in vitro testing on the LLC-PK (pig kidney epithelial) cell line in order to determine their IC50 values. Compound 4c showed no cytotoxic activity, while 4a and 4b were found to have IC50 values of 15 and 205 μM, respectively.     

Conjugate additions of lithium dialkynylcuprates [(RCC)2CuLi] to activated chromones. Unexpected formation of the 6H-bis[1]benzopyrano[2,3-b:3′,4′-e]pyridine system

Lithium dialkynylcuprates [(RCC)₂CuLi], 1a-d, are easily generated and undergo conjugate additions to activated chromones giving 2-alkynylchroman-4-ones 4a-d, 13, 15c,d and 5, however, 1,4-additions to 3 proceed anomalously to give the eneynonitriles 6a-b and the bisbenzopyranopyridine 7.     

Synthesis, characterization and antitumor properties of titanocene derivatives with thiophene containing ligands

The titanocene complexes [TiCp₂(Cl)R] (1), [TiCp₂(Cl)SR] (2), [TiCp₂(SR)₂] (3) with R = benzothienyl (BT) A and dibenzothienyl (DBT) B, were synthesized and the molecular structures of [TiCp₂(Cl)DBT] (1B) and [TiCp₂(Cl)SDBT] (2B) confirmed by single crystal X-ray diffraction studies. The dibenzothiophene rings are planar and for 1B in the plane of the titanium and chloro ligand. The chloro ligand is in a trans position to the sulfur atom with respect to the titanium-carbon bond. The complexes were studied for their electronic and structural features and preliminary tests were conducted for their tumor inhibiting properties against HeLa and COLO 320M tumor cell lines. These antitumor activities were compared against those observed for titanocene dichloride (S-01) under similar conditions and the highest antitumor activity was recorded for 2B.     

Greener fluorous chemistry: Convenient preparation of new types of ‘CF3-rich’ secondary alkyl mesylates and their use for the synthesis of azides, amines, imidazoles and imidazolium salts

2,2,2-Trifluoroethanol, 1,1,1,3,3,3-hexafluoro-2-propanol, and nonafluoro-tert-butyl alcohol were used as precursors for the preparation of the appropriate bis(polyfluoroalkoxymethyl)carbinols [(R_FHOCH₂)₂CHOH, 1a-c, R_FH = (a) CF₃CH₂, (b) (CF₃)₂CH, and (c) (CF₃)₃C] and the corresponding mesylates [(R_FHOCH₂)₂CHOSO₂CH₃, 2a-c]. This novel design paradigm is introduced to eliminate the persistence and bioaccumulation problems of fluorous chemistry, which are associated with the use of longer linear perfluoroalkyl groups (e.g. R_fn ≥ n-C₈F₁₇, n-C₇F₁₅). Secondary mesylates 2a,b and the primary tosylate [(CF₃)₃COCH₂CH₂OTs, 2d] displayed acceptable reactivity towards azide and imidazole nucleophiles to allow the syntheses of novel fluorous azides, which on hydrogenolysis with H₂/Pd-C offered fluorous amines [(R_FHOCH₂)₂CHNH₂, 8a,b], and 1-(polyfluoroalkyl)imidazoles (5a,b,d), respectively, while 2c showed no reactivity due to steric hindrance. The reaction of 8a,b with formaline, glyoxal and hydrochloric acid gave symmetrical 1,3-dialkylated imidazolium chlorides (9a,b), while 5a,b,d were effectively alkylated using n-C₈F₁₇(CH₂)₃I, methyl iodide, 2-bromoethanol, and 2d to yield the corresponding 1,3-dialkylimidazolium iodides, bromides, and tosylates (7aa-ec). Some physical properties of new compounds including mp, bp and solubility patterns were also analyzed; and the fluorophilicity values of 1a-c, and 2a-c were experimentally determined by GC and/or ¹⁹F NMR spectroscopy.     

A facile approach for the synthesis of novel substituted 4H-chromenes and condensation reactions of 4H-chromenes leading to chromenopyrrolones and triazolylchromenopyrrolones

A facile method has been developed for the synthesis of 4H-chromene-3-carboxylates 3a–d by the nucleophilic substitution reaction of 2-hydroxy-2H-chromene-3-carboxylates 2a–d with triethylsilane in the presence of BF₃·O(C₂H₅)₂. Cyclocondensation of 4H-chromene-3-carboxylates 3a–d with benzylamines 4a–d afforded a series of 2,3-dihydrochromenopyrrolones 5a–p and with propargylamine afforded 2-propynyl-2,3-dihydrochromenopyrrolones 6a–d. Click reaction of 6a–d with benzyl azides 7a–d provided a series of 1H-1,2,3-triazolylmethyl-2,3-dihydrochromenopyrrolones 8a–p. Thus synthesized compounds 3a–d, 5a–p, 6a–d, and 8a–p are novel heterocyclic compounds and being reported for the first time.     

Syntheses, structure and ethylene polymerization behavior of β-diiminato titanium complexes

A series of new titanium complexes bearing β-diiminato ligands [(Ph)NC(R₁)CHC(R₂)N(Ph)]₂TiCl₂ (4a: R₁ = R₂ = CH₃; 4b: R₁ = R₂ = CF₃; 4c: R₁ = Ph, R₂ = CH₃; 4d: R₁ = Ph, R₂ = CF₃) has been synthesized and characterized. X-ray crystal structures reveal that complexes 4a and 4c adopt distorted octahedral geometry around the titanium center. With modified methylaluminoxane (MMAO) as a cocatalyst, complexes 4a-d are active catalysts for ethylene polymerization, and produce high molecular weight polyethylenes. Catalyst activities and the molecular weights of polymers are considerably influenced by the steric and electronic effects of substituents on the catalyst backbone under the same polymerization condition. With the strong electron-withdrawing groups (CF₃) at R₁ or/and R₂ position, complexes 4b and 4d show higher activities than complexes 4a and 4c, respectively.     

Synthesis and structure of {{amino(triorganosilyl)carbene}pentacarbonyltungsten(0)} complexes and attempted synthesis of {[2-bis(trimethylsilyl)methyl-3-triorganosilyl-2H-azaphosphirene-κP]pentacarbonyltungsten(0)}

First examples of tungsten aminocarbene complexes [(OC₅)W{C(SiR¹_nR²_3-n)NH₂}] 2a-d (R¹ = Ph, R² = Me) were synthesized via ammonolysis of the corresponding methoxycarbene complexes 1a-d. They were characterized by NMR spectroscopy, MS, IR, UV/Vis and elemental analysis, and in the case of the C-triphenylsilyl derivative 2a by single-crystal X-ray structure analysis. The reaction of P-chloro alkylidenephosphane 3 with complexes 2a-d, meant to give 2H-azaphosphirene complexes, was monitored by ³¹P NMR spectroscopy to reveal the formation of the products 4-7, which were presumably formed via decomposition of the transient complexes 10a-d.     

A convenient and efficient route for the synthesis of amidecrownophanes via 1:1 macrocyclization of di(acid chloride) with diamine derivatives

Four amidecrownophanes 3a-d, including three new compounds 3a, 3c and 3d, were readily prepared through amidation of dicarbonyl dichloride with diamine derivatives without using high-dilution or template conditions and then the tandem Claisen rearrangement. At the macrocyclization step the intramolecular hydrogen bonding of the intermediate might play an important role to give high yields of 1:1 macrocycles.     

Synthesis of sulfur containing analogues of the soluble guanylate cyclase inhibitor 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazin-1-one NS2028

Sulfur analogues of the soluble guanylate cyclase (sGC) inhibitor NS2028 1a are synthesized. Treating 8-bromo-2H-benzo[b][1,4]oxazin-3(4H)-one oxime (6) with 1,1′-thiocarbonyldiimidazole (1.1 equiv) gave the carbamothioate 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazine-1-thione (3a) in 83% yield. Alternatively reacting NS2028 1a with P₂S₅ (0.5 equiv) affords the carbamothioate 3a in 80% yield. Similar treatment of 8-aryl substituted NS2028 analogues 1b-d with P₂S₅ gave the carbamothioates 3b-d in 64-91% yields. Although quite stable, the carbamothioates 3a-d could be thermally isomerized in the presence of Cu (10 mol %) to afford the thiocarbamates 4a-d in high yields. Interestingly, in the case of carbamothioate 3a Pd and In metals also facilitated the isomerization. Furthermore, treatment of the thiocarbamates 4a-d with P₂S₅ (0.5 equiv) affords the carbamodithioates 5a-d in 72-89% yields. All new compounds are fully characterized including single crystal X-ray data for carbamothioate 3a and thiocarbamate 4a. Finally, a mechanism is proposed for the carbamothioate to thiocarbamate isomerization.