Bi2WO6量子点(QDs)修饰Bi2MoO6-xF2x异质结的构筑及其催化活性增强机理

采用简单沉积-沉淀法合成了Bi₂WO₆@Bi₂MoO_6-xF_2x（BWO/BMO6-xF2x）异质结,借助XRD、XPS、TEM、SEM、EDS、UV-Vis-DRS、PC和EIS等测试技术对其组成、形貌、光吸收特性和光电化学性能等进行系统表征,并以模型污染物罗丹明B（RhB）的光催化降解作为探针反应来评价Bi₂WO₆@Bi₂MoO_6-xF_2x异质结的光催化活性增强机制。形貌分析表明,所得Bi₂MoO₆微球由大量厚度为20~50 nm的纳米片组成;FE-SEM和HR-TEM分析表明,尺寸约为10 nm的Bi₂WO₆量子点均匀沉积在Bi₂MoO_6-xF_2x微球表面,形成新颖的Bi₂WO₆@Bi₂MoO_6-xF_2x异质结;与纯Bi₂MoO₆或者Bi₂WO₆相比,1∶1Bi₂WO₆@Bi₂MoO_6-xF_2x异质结表现出更好的光催化活性和光电流性质,其对RhB光催化降解的表观速率常数分别为纯BMO和BWO的6.4和11.6倍。PC和EIS图谱分析表明,Bi₂WO₆量子点表面沉积显著提高Bi₂MoO_6-xF_2x光生电子/空穴的分离效率和迁移速率;活性物种捕获实验证明了·O₂^-和h⁺是主要的活性物种。根据实验结果,探讨了F^-掺杂和Bi₂WO₆量子点之间的协同效应对Bi₂MoO₆的光催化活性的影响机制。     

三元体系YCl3-CdCl2-H2O和四元体系YCl3-CdCl2-HCl(～8.8%)-H2O (25 ℃)的相平衡及其固相新化合物的研究

The equilibrium solubilities of the ternary system YCl₃-CdCl₂-H₂O, the quaternary system YCl₃-CdCl₂-HCl(～8.8%)-H₂O were determined at 25 ℃ and the phase diagrams were constructed. The results show that the ternary system was complicated with six equilibrim solid phases CdCl₂·2.5H₂O, CdCl₂·H₂O, 8CdCl₂·YCl₃·15H₂O (8∶1 type), 4CdCl₂·YCl₃·13H₂O(4∶1 type), 5CdCl₂·2YCl₃·26H₂O (5∶2 type) and YCl₃·6H₂O. The quaternary system was also complicated with four equilibrim solid phase CdCl₂·H₂O, 4CdCl₂·YCl₃·13H₂O (4∶1 type), 5CdCl₂·2YCl₃·26H₂O(5∶2 type) and YCl₃·6H₂O. Among the three new compounds 8CdCl₂·YCl₃·15H₂O, 4CdCl₂·YCl₃·13H₂O and 5CdCl₂·2YCl₃·26H₂O, 8CdCl₂·YCl₃·15H₂O was a kind of metastable compound only in ternary system, and it was changed into 4CdCl₂·YCl₃·13H₂O with time. Both 4∶1 type and 5∶2 type existed in ternary and quaternary system, but they were also congruently soluble compounds in quaternary system. They have been prepared from the system and have been characterized by XRD, TC-DTG and DSC.     

纳米Mn-Zn铁氧体的制备和研究

Nanosize manganese zinc ferrites were fabricated by hydrothermal precipitation route using Fe₂(SO₄)₃, ZnSO₄·7H₂O, MnSO₄·H₂O as material, then some calcinated at 500 ℃ and studied by XRD, TEM, IR and VSM. The results showed that the products were spinel crystal structure and uniformly sized nanoparticles (15～25 nm) with little aggregation. The analysis of IR showed that the superficial water can be eliminated, but that was embedded in crystal lattice can not be removed by calcinating. The effect Zn content x on the lattice (a) of nanosize Mn_1-xZn_xFe₂O₄ was also discussed. The lattice of nanosize Mn_1-xZn_xFe₂O₄ decreases with x increasing; and its value deviated the standard lattice (a₀) of normal size manganese zinc ferrites. A lot of water was absorbed during the hydrothermal process owing to the large surface of nanosize particles. The change of magnetic properties of Mn_xZn_1-xFe₂O₄ with x increasing was studied: nanosize Mn_xZn_1-xFe₂O₄ particles synthesized by us exhibited peculiar magnetic properties curve with Zn content (x) increasing, Superparamagnetic behaviors of the synthesized ZnFe₂O₄ samples were confirmed by magnetic characterization, which can be explained by the difference between the distribution of the metal ions (Mn²⁺, Zn²⁺ and Fe³⁺) among the tetrahedral (A) and the octahedral (B) sites of nanosize ferrite and that of bulk ferrite.     

掺杂和取代对红色荧光材料SrAl12O19:Mn4+发光性能的影响

SrAl₁₂O₁₉：Mn⁴⁺是一种用于高显色性白光发光二极管的候选红色荧光材料。本论文研究了Mg²⁺、Zn²⁺和Ge⁴⁺离子的掺杂效应以及Ga³⁺、Ca²⁺和Ba²⁺离子的取代效应对SrAl₁₂O₁₉：Mn⁴⁺荧光材料性能的影响。样品通过高温固相反应制备,焙烧温度在1 250~1 500 ℃之间。利用X射线衍射技术表征了材料的相纯度,用荧光激发光谱和发射光谱表征了材料的荧光性能。研究结果指出,与未进行Mg²⁺或Zn²⁺掺杂的样品相比,Mg²⁺或Zn²⁺离子对Al³⁺格位的掺杂可以使材料的发光强度提高~60%,其原因被认为是掺杂促进了激活剂Mn⁴⁺离子进入晶格,其过程可以表示为：MO+MnO₂⇔M_Al^''+M_Al^·+3O_O^×（M=Mg,Zn）,电子顺磁共振谱支持这一结果。Ge⁴⁺离子的掺杂使材料的发光性能明显下降。Ga³⁺离子可以取代Al³⁺离子形成全范围的固溶体,其中少量Ga³⁺离子的掺杂可以使材料的荧光发射强度提高~13%,而掺杂量进一步提高使材料的荧光性能下降。Ca²⁺和Ba²⁺对Sr²⁺的取代仅形成有限范围的固溶体。Ca²⁺的取代使材料的发光性能提高;而 Ba²⁺的取代使材料的发光强度下降。     

电荷补偿对Ba2ZnGe2O7：Bi3+荧光粉发光性质的影响

采用高温固相法制备了2个系列的荧光粉样品：Ba_2-xZnGe₂O₇：xBi³⁺（系列Ⅰ）和Ba_1.994-yK_yZnGe₂O₇：0.006Bi³⁺（系列Ⅱ）。X射线衍射（XRD）测试结果表明,少量Bi³⁺、K⁺的掺杂不会明显改变材料的物相结构。样品的荧光光谱测试结果表明,虽然2个系列样品的发光光谱都随组成成分变化有少量变化,但发光颜色基本上均为黄绿色。在358 nm的激发下,荧光粉的发射光谱呈现一个峰值在500 nm的宽发射带,归属于³P₁→¹S₀能级跃迁。在500 nm监测下,荧光粉的最强激发峰位于358 nm,归属于¹S₀→³P₁能级跃迁,此外还有一个位于320 nm的肩峰归属于O^2--Bi³⁺电荷转移带。系列Ⅰ样品的光谱数据结果指出,Bi³⁺的最佳掺杂量x为0.006。在该基质中,Bi³⁺掺杂取代Ba²⁺属于不等价取代,会在晶格中产生Ba²⁺空位或间隙O^2-,对材料的发光强度产生负面影响。对此,采用K⁺与Bi³⁺协同掺杂起到电荷补偿的作用,填补Ba²⁺空位或捕获间隙O^2-缺陷。空位被填补或间隙被捕获均减少了晶格畸变,从而使发光强度明显提高。系列Ⅱ样品的光谱数据表明,完全电荷补偿的荧光粉样品相比于没有掺K⁺的样品,其发光强度提高了约2.5倍。     

g-C3N4/CaTi2O5复合材料制备及其光催化性能

利用类石墨氮化碳（g-C₃N₄）和亚稳相钙钛氧化物（CaTi₂O₅）固相法制备C₃N₄/CaTi₂O₅复合材料。利用X射线衍射（XRD）、金相显微镜、扫描电子显微镜（SEM）及附带能谱分析仪（EDS）和N₂吸附-脱附对样品的显微结构和比表面积进行检测分析,并用紫外-可见吸收光度计（UV-Vis）测试了样品的光吸收性能,研究C₃N₄与CaTi₂O₅物质的量之比（n_C3N4/nCaTi₂O₅）对C₃N₄/CaTi₂O₅复合样品的物相结构和微观形貌的影响,同时考察C₃N₄/CaTi₂O₅复合样品在可见光照射下光催化降解罗丹明染料效果。实验结果表明：相比纯C₃N₄和CaTi₂O₅样品,C₃N₄/CaTi₂O₅复合样品在可见光下具有较高的光催化性能,随着n_C3N4/nCaTi₂O₅增加,样品的光催化降解率随之增加而后降低,当n_C3N4/nCaTi₂O₅=1：1时,样品的光催化降解率达到最大值99.5%,并且循环重复利用5次后,样品的光催化剂降解率仍几乎保持不变。复合样品光催化性能提高主要归因于复合能级结构有效地抑制了电子和空穴复合所致。     

CO2在纳米SiO2/TiO2悬浮体系中的光催化还原

用水热法合成了氧化硅改性的具有高比表面积、高催化活性的锐钛型二氧化钛, 并在其悬浮体系中将CO₂光催化还原合成甲醇. 采用XRD, TEM, 物理吸附, UV-Vis吸收光谱和FTIR等表征手段对催化剂结构特征进行了研究. 结果表明: 添加氧化硅后, 氧化硅和二氧化钛之间形成Si—O—Ti键, 抑制了TiO₂晶粒生长, 提高了锐钛型TiO₂的比表面积, 且随着含硅量的增加, SiO₂/TiO₂的UV吸收逐步蓝移, 禁带宽度增加. 还原反应结果表明: SiO₂/TiO₂具有光催化还原活性, 且随着含硅量的增加先增加后减小, 当SiO₂质量分数为3.5%时, SiO₂/TiO₂复合催化剂反应活性最强, 5 h内甲醇产量可达到21.0 mg/L, 并有少量甲醛生成.     

四种Keggin型多酸纳米材料的制备及其吸附有机染料的性能

以4种Keggin型多酸作为原料(分别为H₃PW₁₂O₄₀·36H₂O(简写为PW₁₂^a)、H₃PMo₁₂O₄₀·34H₂O(简写为PMo₁₂^a)、H₄SiW₁₂O₄₀·35H₂O(简写为SiW₁₂^a)和H₄GeW₁₂O₄₀·40H₂O(简写为GeW₁₂^a)),采用表面活性剂智能化控制的软化学法制备了相应的4种Keggin型多酸纳米材料,分别为Ag₃PW₁₂O₄₀·36H₂O(简写为PW₁₂^b)、Ag₃PMo₁₂O₄₀·34H₂O(简写为PMo₁₂^b)、Ag₄SiW₁₂O₄₀·35H₂O(简写为SiW₁₂^b)和Ag₄GeW₁₂O₄₀·40H₂O(简写为GeW₁₂^b)。采用IR、UV-Vis、XRD和SEM表征多酸的结构和纳米粒子的形貌。在室内黑暗条件下,100mg样品可在5min内把20mg·L^-1的100mL亚甲基蓝(MB)染料溶液脱色,使其变为接近无色,吸附效率最高可达96.3%,吸附效率大小为PMo₁₂^b >PW₁₂^b >GeW₁₂^b >SiW₁₂^b。相同条件下,100mg样品使20mg·L^-1的100mL罗丹明B(RhB)染料溶液30min内脱色完全,脱色效率最高可达96.1%,吸附效率大小为PW₁₂^b >PMo₁₂^b >SiW₁₂^b >GeW₁₂^b。说明该4种多酸纳米材料具有较高的吸附有机染料性能。     

ZnAl2O4:Mn材料的制备及发光性能

以共沉淀法与煅烧法联用,成功制备了一系列ZnAl₂O₄:xMn样品。通过扫描电镜和X射线粉末衍射测试研究了样品的形貌和物相特征,结果表明尖晶石结构的ZnAl₂O₄中[AlO₆]的八面体位可以有效被Mn⁴⁺替代。通过荧光激发和发射光谱研究了样品的发光性能,发现Mn⁴⁺在ZnAl₂O₄体系中掺杂可以显示出明亮的红色发光(发射峰值位于680 nm处)。比较不同Mn⁴⁺浓度(Mn与Al的物质的量之比)掺杂样品的发光强度时发现,Mn⁴⁺最佳掺杂浓度为0.06%。通过德克斯特公式分析了发光强度与浓度关系,探究浓度猝灭机制,结果表明最邻近离子之间能量传递造成Mn⁴⁺浓度猝灭的发生。为了提高Mn⁴⁺的发光强度,选择了7种金属离子(Li⁺、Na⁺、K⁺、Ca²⁺、Sr²⁺、Sn²⁺和Ga³⁺)与Mn⁴⁺共掺杂进入ZnAl₂O₄基质中,其中效果较突出的为Li⁺和Ga³⁺,其共掺杂使Mn⁴⁺发光强度分别增强0.6倍和1倍。     

HEPT类化合物的QSAR研究

为定量结构／活性相关性研究提取了量子化学参数,拓扑指数Am,分子连接性指数^mxt及疏水性常数,同时应用正交变换和最佳变量子集算法（Leaps-and-Bonds)进行了变量压缩和选择,进而实施了多元回归分析,并由此结果进行了HEPT类化合物（1－[(2-hydroxyethoxy)methyl]-6-(phenylthio)-thymine derivatives)的结构／活性关系的理论解释,进行了人工神经网络法对于该类化合物的活性预测,其结构明显好于多元回归法。     

液滴荧光传感与计算机联用技术在微量分析中的应用

通过在LS55型荧光-磷光-发光分光光度计上加装液滴产生及调节附件,采用计算机采集与分析处理数据,成功地研制了双通道液滴光化学传感装置.利用葡聚糖凝胶对复合维生素B中不同组分的选择性吸附来达到分离与同时检测的目的,并将其用于复合维生素B药片的分析,取得了满意的结果.     

From the Micro- to the Macro-: Managing the Conservation of the Warship,Vasa

Sweden's famous warship, Vasa, sank on her maiden voyage in August 1628, and remained on the bottom of Stockholm harbour for 333 years. Raised in 1961, she became the first large-scale wooden object to be treated with polyethylene glycol (PEG). In the summer of 2000 a number of acidic salt precipitations were noticed on the surface of the ship and on wooden artefacts in the storerooms. An international research project has been established to look into the causes of this problem and suggest possible re-treatments. Meanwhile projects are underway to monitor movements in the ship, to build a better support system, and to replace the thousands of iron bolts holding the structure together, while a sophisticated new climate system has recently been installed in the museum.     

On the scaling of the interface energy of the liquid clusters in the disordered nanoporous medium

Similarity of the extrusion curves of non-wetting liquid in a nanoporous medium with different initial fill volume fractions is observed experimentally. The similarity can be explained by the scaling of the interface energy and the self-similarity of the infinite percolation cluster of fluid-filled pores. Understanding the physical processes leading to the observed phenomena is a foundation for the development of high-performance devices for damping and energy storage on the basis of such heterogeneous systems.     

Using of the Agglomeration-in-liquid for the Technology of the Fine Materials

The content of the fine and ultrafine particles in the raw material results in difficulty of the separation, the loss of the valuable components and ecological contamination. Secondary using of the fine particles is impossible without their granulation. This problem has been solved by the agglomeration-in-liquid method.An agglomeration-in-liquid method is a process to produce agglomerates in a liquid phase from solid particles suspended in the liquid. The surface of solid particles and the binding liquid must be of identical polarity, but the continuous phase must be of the opposite polarity. The water solutions of the surfactant are the binding liquids or the organic liquids.     

On the quality of the hardness kernel and the Fukui function to evaluate the global hardness

An approximated hardness kernel, which includes the second derivative with respect to the density of the kinetic energy, the electron-electron coulomb repulsion, and the exchange density functionals, has been tested for the calculation of the global hardness. The results obtained for a series of 40 cations and neutral systems and 16 anions represent in most cases an improvement of the results obtained using the HOMO-LUMO gap approach and indicate the viability of this approach to evaluate global hardness. In addition, the relevance of the Fukui function approximation and the role of the three components of the hardness kernel in the evaluation of the global hardness have been analyzed.     

Copper-containing dendromesogens: the influence of the metal on the mesomorphism

The synthesis and liquid crystalline behaviour of the first and second generations of a dendrimeric structure based on poly(propyleneimine)(DAB-dendr(NH₂)_x) are reported. 4-(4-n-Alkoxybenzoyloxy)salicylaldehydes are used as mesogenic moieties attached at the peripheral amino groups of the dendrimers giving rise to dendromesogens with four and eight mesogenic branches. From these dendromesogens, considered as organic ligands, were prepared six metal-containing dendrimers which incorporate two or four copper atoms in their structures. All the dendrimeric ligands and three of the metal-containing dendrimers exhibit liquid crystalline properties which were studied by optical microscopy, DSC, X-ray diffraction and EPR spectroscopy.     

光亮剂对银电沉积行为的影响

用电势阶跃法和旋转圆盘电极法 (RDE)以及SEM和XRD测试手段 ,初步研究了光亮剂对氰化体系中银电沉积行为的影响 .研究表明 ,光亮剂的加入并未导致银电沉积成核机理的改变 ,但显著增强了镀液的微观平整效应 ,并且所得镀层的表观光滑程度明显改善 .XRD测试亦同时表明光亮剂的加入并未改变镀层的择优取向     

On the dependence of the critical supersaturation on the initial undersaturation in the reverse Wilson chamber

The dependence of the critical supersaturation on the degree of the initial undersaturation has been analyzed in detail.This dependence is explained by means of the Richarch-Powell equation, taking into account the dependence of the -ratio upon the partial pressures of the inert gas and the liquid under investigation.