High-performance liquid chromatographic system for the separation of dynorphin A (1-17) fragments and its application in enzymolysis studies with rat nerve terminal membranes

A high-performance liquid chromatographic method capable of separating a large number of C- and N-terminal degradation fragments of dynorphin A (1-17) (dyn 1-17) in 1 h has been developed. The system has been applied to study the metabolism profiles of various dyn 1-17-derived peptides following in vitro incubation with rat striatum and spinal cord nerve terminal membranes. In addition to the removal of the N-terminal amino acid Tyr, major sites of cleavage between the following amino acids could be established: Leu5-Arg6 in dyn 1-7 (formation of dyn 1-5); Arg6-Arg7 and Leu5-Arg6 in dyn 1-8 (formation of dyn 1-6 and dyn 1-5, respectively); Arg7-Ile8 in dyn 1-9 (formation of dyn 1-7) and Arg9-Pro10 in dyn 1-10 (formation of dyn 1-9). Studies with inhibitors of the enzymes involved show that dyn 1-5 is formed directly from dyn 1-8 via an endopeptidase insensitive to the angiotensin-converting enzyme inhibitor MK 422 acting on the scissile Leu5-Arg6 bond in dyn 1-8. The method circumvents the use of [3H]Tyr-labelled dynorphins, which have the inherent drawback that fragments lacking the N-terminal Tyr cannot be detected. Owing to the high resolution, also for the larger dynorphins dyn 1-14, dyn 1-15 and dyn 1-16, the chromatographic system should prove especially useful in the elucidation of the enzymolysis pattern of dyn 1-17. Furthermore, the method offers a way to evaluate simultaneously the selectivity of new enzyme inhibitors for several cleavage sites in the same assay.     

Conformational analysis of dynorphin A (1-13) using hydrogen-deuterium exchange and tandem mass spectrometry

Trifluoroethanol (TFE)-induced conformational changes in dynorphin A (1-13) were investigated using charge-state distribution (CSD) and hydrogen-deuterium exchange (HDX), combined with electrospray ionization (ESI) mass spectrometry (MS). Individual amino acids involved in secondary structural elements were identified by collision-induced dissociation-tandem mass spectrometry (MS/MS). It was observed that dynorphin A (1-13) largely exists in an unfolded conformation and a folded structure in increasing concentrations of TFE. In 50% TFE, it forms an alpha-helix that encompasses residues 1-9 and remains flexible from residues 10 to 13.     

A facile preparation of 1-(6-hydroxyindol-1-yl)-2,2-dimethylpropan-1-one

An effective synthesis of 1-(6-hydroxyindol-1-yl)-2,2-dimethylpropan-1-one (4) was developed starting from 1H-indole (2). The key step involved suitable utilization of 4-(1-pyrrolidino)pyridine for the removal of the chloroacetyl moiety from chloroacetic acid 1-(2,2-dimethylpropionyl)-1H-indol-6-yl ester (3); a possible mechanism is, also, presented. Compound 4 might lead to selectively substituted derivatives, either on the phenolic-OH or the indolyl-NH, with putative biological interest. In this respect, we found that the core structure of 1H-indol-6-ol (1) possesses a degree of aldose reductase inhibitory potential, at a concentration of 100 microM.     

Molecular and crystal structures of (6R, 7R, 14S)-6,14-etheno-7-[(1R)-1-hydroxyethyl]- and (6R, 7R, 14S)-6,14-etheno-7-[(1S)-1-hydroxyethyl]-6,7,8,14-tetrahydro-17-nor-17-phenylthebaine

The crystal structures and absolute configurations of (6R,7R,14S)-6,14-etheno-7-[(1R)-1-hydroxyethyl]-6,7,8,14-tetrahydro-17-nor-17-phenylthebaine and (6R,7R,14S)-6,14-etheno-7-[(1S)-1-hydroxyethyl]-6,7,8,14-tetrahydro-17-nor-17-phenylthebaine were established by X-ray diffraction analysis. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2245–2250, November, 1998.     

A new route to the improved synthesis of 1-(alkoxymethyl)-5-alkyl-6-(arylselenenyl)uracils

A new route to C-6-selenenyl analogs of compound 1a from 5-alkyl-6-chlorouracils 6a-b has been described. A mild and highly efficient synthesis of 1-(alkoxymethyl)-5-alkyl-6-(arylselenenyl)uracils 8a-e has been accomplished from 6a-b in good yields using a two step procedure. Silylation of 5-alkyl-6-chlorouracils 6a-b using N,O-bis(trimethylsilyl)acetamide followed by regioselective alkylation of the silylated intermediate with ethyl or benzyl chloromethyl ether in dichloromethane afforded the desired 1-(alkoxymethyl)-5-alkyl-6-chlorouracils 7a-d in 88–94% yields. Compounds 7a-d readily underwent addition-elimination reaction with an appropriate arylselenol in the presence of ethanolic sodium hyroxide to produce the corresponding 1-(alkoxymethyl)-5-alkyl-6-(arylselenenyl)uracils 8a-e in excellent yields (94–99%).     

暴露于环境烟气中的大鼠尿样代谢物分析

4-(甲基亚硝胺基)-1-(3-吡啶基)-1-丁醇(NNAL)是烟草特有亚硝胺4-(甲基亚硝胺基)-1-(3-吡啶)-1-丁酮(NNK)在生物体内的一种代谢标记物,分析暴露于烟气中的生物体内NNAL的含量是研究卷烟烟气对生物体健康影响的有效手段.基于人体的个体差异性很大,本文以饲养的大鼠为研究对象,采用LC-MS/MS...     

A New Route to the Synthesis of 2-Amino-6-(methoxycarbonyl)amino-4-(tetrahydropyridyl)pyrimidine 1-Oxide

A new approach to 2-amino-6-(methoxycarbonyl)amino-4-(1,2,3,6-tetrahydro-1-pyridyl)pyrimidine 1-oxide ( 3 ) is described. Methyl [1-ethoxy-2-(ethoxycarbonyl)-ethylidene]carbamate ( 5 ) reacted with guanidine to the pyrimidinecarbamate 6 , which was successively transformed into methyl 2-amino-6-(p-tolyslulfonyl)oxy-4-pyrimidinecarbamate ( 8 ). Oxidation of 8 led to the corresponding pyrimidine N-oxide 9 , a useful starting material to 3 .     

A new method for the preparation of 1-(chloromethyl)- and 1-(dichloromethyl)silatranes

A preparative method for the synthesis of 1-(chloromethyl)- and 1-(dichloromethyl)silatranes was developed based on the reactions of 1-chlorosilatrane with the binary P(NMe₂)₃–СHX₃ system (X₃ = HBrCl, Cl₃).

     

A Short and Stereoselective Synthesis of the （-）-（5R, 6S）-6-Acetoxy-hexadecane-5-olide

(-)-(5R, 6S)-6-Acetoxyhexadecan-5-olide 1, a natural mosquito attractant pheromone,was synthesized from readily available aldehyde 2 and cyclopentanone 3 using L-proline-catalyzed asymmetric aldol reaction as the key step.     

Structure of 1-(arylselanyl)naphthalenes. 2. G dependence in 8-G-1-(p-YC(6)H(4)Se)C(10)H(6).

The structures of 8-G-1-(p-YC(6)H(4)Se)C(10)H(6) (1 (G = Cl) and 2 (G = Br): Y = H (a), OMe (b), Me (c), Cl (d), Br (e), COOEt (f), and NO(2) (g)) were investigated by X-ray crystallographic analysis, NMR spectroscopy, and ab initio MO calculations. The structures of all members in 1 and 2 are concluded to be type B, which is in striking contrast to the type A structure for 4d-g (4 (g(n)), where G = H). The Se-C(i) bond of the p-YC(6)H(4)Se group in 8-G-1-(p-YC(6)H(4)Se)C(10)H(6) is almost perpendicular to the naphthyl plane in type A, and it is located on the plane in type B. The chlorine and bromine substitution at the 8-position in 1 and 2 dramatically changes the type A structure of 4 (g(n)) to type B. The nonbonded G- - -Se-C 3c-4e type interaction must contribute to stabilize the type B structure. The type B structure in 1 and 2 should also be more stabilized than the same structure in 4 by the 3c-4e type interaction: The structure of 4b is type B in the crystals and type B would be more stable for 4c and might be for 4a in solutions. Ab initio MO calculations are performed on 8-G-1-(p-YC(6)H(4)Se)C(10)H(6), 8-G-C(10)H(6)SeH-1, and models HG- - -SeH(2), where G = Cl, Br, and F, to clarify the reason for the dramatic change in the structures. The type B structure is optimized to be more stable than the type A for all species examined, which supports the observations. The energy differences between type B and type A are larger for the models than for the naphthalenes. While the superiority of the type B for the former is Br > Cl > F, that of the latter is Br approximately Cl >/= F. These results show that the main factor of the structural change from type A to type B is the nonbonded G- - -Se-C 3c-4e interaction. The electronic effect of halogens through the naphthalene pi-framework would also contribute to some extent, although the direct comparison of the evaluated values between the naphthalene systems and the models is not so easy. Factors to stabilize the two structures of 1, 2, 4, and 8-(MeSe)-1-(p-YC(6)H(4)Se)C(10)H(6) are reexamined from a viewpoint of the nonbonded G- - -Se-C 3c-4e interaction (G dependence), together with the electronic effect of Y (Y dependence).     

Rapid quantitation of 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) and its metabolite 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL) in rat urine using ultra-fast liquid chromatography mass spectrometry (UFLC/MS/MS)

The tobacco-specific nitrosamine 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) is a component of tobacco smoke and is rapidly metabolized to 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL). Limited information is available on the relative systemic exposures resulting from NNK administration via the oral, intraperitoneal injection, and inhalation routes. Moreover, there is a need for a rapid method for simultaneous quantitative analyses of NNK and NNAL in rat urine. We developed a method based on Ultra Fast Liquid Chromatography Mass Spectrometry (UFLC/MS/MS) for the extraction and analysis of the potent lung carcinogens NNK and NNAL. Following addition of synthetic labeled internal standards, urine was introduced to 96 well plate Evolute^® Express CX 30?mg solid phase extraction system. The eluates were dried under vacuum and reconstituted in mobile phase before injecting to the LC system. The use of UFLC allowed for a 7.1?min run time. The precision and accuracy of the samples was 1.2-6.6% relative standard deviation (%RSD) and 91-113% of the concentration added, respectively. The limits of detection for NNK and NNAL were 70 and 3.0?pg/mL, respectively. The selectivity and sensitivity of this method improves the ability to measure these compounds at low concentrations and greatly facilitate toxicological studies of the NNK and NNAL.     

Formation of Metallo-6(A)-((2-(bis(2-aminoethyl)amino)ethyl)amino)-6(A)-deoxy-beta-cyclodextrins and Their Complexation of Tryptophan in Aqueous Solution

A pH titration study shows that 6(A)-((2-(bis(2-aminoethyl)amino)ethyl)amino)-6(A)-deoxy-beta-cyclodextrin (betaCDtren) forms binary metallocyclodextrins, [M(betaCDtren)](2+), for which log(K/dm(3) mol(-)(1)) = 11.65 +/- 0.06, 17.29 +/- 0.05, and 12.25 +/- 0.03, respectively, when M(2+) = Ni(2+), Cu(2+), and Zn(2+), where K is the stability constant in aqueous solution at 298.2 K and I = 0.10 mol dm(-)(3) (NaClO(4)). The ternary metallocyclodextrins [M(betaCDtren)Trp](+), where Trp(-) is the tryptophan anion, are characterized by log(K/dm(3) mol(-)(1)) = 8.2 +/- 0.2 and 8.1 +/- 0.2, 9.5 +/- 0.3 and 9.4 +/- 0.2, and 8.1 +/- 0.1 and 8.3 +/- 0.1, respectively, where the first and second values represent the stepwise stability constants for the complexation of (R)- and (S)-Trp(-), respectively, when M(2+) = Ni(2+), Cu(2+), and Zn(2+). From comparisons of stabilities and UV-visible spectra, the binary and ternary metallocyclodextrins appear to be six-coordinate when M(2+) = Ni(2+) and Zn(2+) and five-coordinate when M(2+) = Cu(2+). The factors affecting the stoichiometries and stabilities of the metallocyclodextrins, are discussed and comparisons are made with related systems.     

A novel synthesis of N(1)-(substituted)-pyrimido[5,4-e]-1,2,4-triazine-5,7(1H,6H)-diones

A new synthesis of N₁-(substituted)-pyrimido[5,4-e]-1,2,4-triazine-5,7(1H,6H)-diones, which are analogues of the natural product toxoflavin, is reported. Condensation of preformed alkyl or aryl hydrazones with 6-chloro-3-methyl-5-nitrouracil efficiently provides pyrimidotriazinediones in a three-step process that broadens the scope of R₁ substituents.     

Enantioselective oxidation of (RS)-2-phenyl-1-propanol to (S)-2-phenylpropanoic acid with Gluconobacter oxydans: simplex optimization of the biotransformation

The microbial oxidation of racemic 2-phenyl-1-propanol by Gluconobacter oxydans DSM 50049 was investigated. Whole bacterial cells were used to produce (S)-(+)-2-phenylpropanoic acid with high enantiomeric excess (E>200). A simplex sequential method was employed as an experimental design to guide the optimization process. Temperature of 26–28°C, pH 6.0–6.2, substrate concentration of 20–25 mM and agitation of 150 rpm have been found the best conditions to achieve the highest reaction rates and enantioselectivities.     

Synthesis of the core tetrasaccharide of Trypanosoma cruzi glycoinositolphospholipids: Manp(alpha1-->6)-Manp(alpha1-->4)-6-(2-aminoethylphosphonic acid)-GlcNp(alpha1-->6)-myo-Ins-1-PO4

[structure: see text] Synthesis of the core tetrasaccharide Manp(alpha1-->6)-Manp(alpha1-->4)-6-(2-aminoethylphosphonic acid)-GlcNp(alpha1-->6)-myo-Ins-1-PO4, found in glycoinositolphospholipids of Trypanosoma cruzi parasites, is described. The key building block, 6-O-(2-azido-3-O-benzyl-6-O-((2-benzyloxycarbonylaminoethyl)phosphonic acid benzyl ester)-2-deoxy-alpha-D-glucopyranosyl)-1-di-O-benzylphosphoryl-4,5-O-isopropylidene-2,3-O-(D-1,7,7-trimethyl[2,2,1]bicyclohept-6-ylidene)-D-myo-inositol, was synthesized using a partially protected glucosyl D-camphorinositolphosphate and a (2-benzyloxycarbonylaminoethyl)phosphonic acid derivative in a regioselective phosphonate esterfication. Elongation with ethyl 2-O-benzoyl-3,4,6-tri-O-benzyl-alpha-D-mannopyranosyl-(1-->6)-2,3,4-tri-O-benzyl-1-alpha-D-thiomannopyranoside using dimethyl(methylthio)sulfonium trifluoromethanesulfonate gave a fully protected tetrasaccharide which was successfully deprotected subsequently with sodium methoxide, sodium in liquid ammonia, and aq hydrochloric acid to give title compound.