Thermal stability of phthalate esters: Effect of substituents on the β-carbon atom

In order to clarify the mechanism conferring heat resistance on phthalate esters, those with a substituent on the β-carbon atom, such as bis(2-aminobutyl) phthalate, bis(2-nitrobutyl) phthalate, bis(2,4-diphenylbutyl) phthalate and dineopentyl phthalate, were synthesized and their thermal stabilities were studied by thermogravimetry and differential thermal analysis. The analytical results for these phthalate esters were compared with those for dibutyl phthalate, with a straight alkyl chain. As the temperatures required for a 3% weight loss of phthalate esters with a substituent, an electron-donating group (amino group) or an electron-accepting group (nitro group) on the β-carbon atom move to the higher end of the range, the effect of the adjacent group was recognized. The presence of a phenyl group in phthalate esters considerably improved the heat resistance. It is considered that the high heat resistance of bis(2,4-diphenylbutyl) phthalate is due to the obstruction of the planar configuration for cis elimination by the phenyl group and hindrance by the phenyl group of the formation of the six-membered cyclic transition state owing to the interaction between non-bondable molecules.     

Heat capacities of some phthalate esters

Isobaric heat capacities C _p in the liquid phase of dimethyl phthalate, diethyl phthalate, dibutyl phthalate, bis(2-ethylhexyl) phthalate, and benzyl butyl phthalate were measured by commercial SETARAM heat conduction calorimeters. Results obtained cover the following temperature range: dimethyl phthalate 283 to 323 K, diethyl phthalate 306 to 370 K, dibutyl phthalate 313 to 447 K, bis(2-ethylhexyl) phthalate from 313 to 462 K, benzyl butyl phthalate from 313 to 383 K. The heat capacity data obtained in this work were merged with available experimental data from literature, critically assessed and sets of recommended data were developed by correlating selected data as a function of temperature. This revised version was published online in August 2006 with corrections to the Cover Date.     

Effect of plasticizer dibutyl phthalate on the thermal decomposition of nitrocellulose

This paper aims to investigate the effects of plasticizer dibutyl phthalate (DBP) on the thermal decomposition of nitrocellulose (NC) by using a series of analytical apparatuses. In the present study, the detailed structures of pure NC (NC-P) and NC with DBP (NC-D) were revealed by scanning electron microscope. It was found that the fibers in NC-D are more closely aligned than those in NC-P, which makes the thermal behaviors of NC-D different from NC-P. The thermal stability of both NC-P and NC-D was examined by means of simultaneous TG-DSC apparatus (STA). Three different kinetic methods (Kissinger–Akahira–Sunose method, Ozawa–Flynn–Wall method, and Friedman method) were applied for determining the activation energy E of these two NC samples. Moreover, the experimental data were compared with sigmoidal models and pre-exponential factor was calculated by compensation effect. Besides, in situ Fourier transform infrared (FTIR) and a TGA instrument coupled with Frontier FTIR spectrometer were employed to investigate the characteristic functional groups of decomposition residues and gaseous products at different temperatures, respectively. The results show that NC-P and NC-D have similar decomposition products and decomposition mechanisms.     

Human Metabolism of Bis(2-ethylhexyl)phthalate

Abstract

To study the human metabolism of bis (2-ethylhexyl)-phthalate (DEHP) urine samples were analyzed from non-uremic psoriatic patients, uremic patients undergoing hemodialysis treatments and patients undergoing cardiac bypass surgery using High Performance Liquid Chromatography (HPLC). The urine of dialyzed non-uremic patients contained phthalic acid, mono (2-ethylhexyl) phthalate and bis (2-ethylhexyl) phthalate. Other compounds identified were p-hydroxy benzoic acid, m-hydroxy benzoic acid, o-hydroxy hippuric acid, o-hydroxy benzoic acid and benzoic acid, which may be either diet dependent normal urinary constituents or metabolites of bis (2-ethylhexyl) phthalate. The levels of phthalic acid and bis (2-ethylhexyl) phthalate found in the urine of patients who were on total body oxygenators containing a membrane during cardiac bypass surgery were comparable to levels obtained from non-uremic psoriatic patients. Significant levels of phthalic acid were detected in the urine of the uremic patients studied while mono (2-ethylhexyl) phthalate and bis (2-ethylhexyl)-phthalate were present only in small amounts or were completely absent. In general, the urinary phthalate content of uremic patients increased with urinary volume.     

An experimental setup for isobaric heat capacities for viscous fluids at high pressure: Squalane,bis(2-ethylhexyl) sebacate and bis(2-ethylhexyl) phthalate

A high-pressure flow calorimeter has been used to determine highly accurate isobaric heat capacities for different viscous fluids, squalane (SQN), bis(2-ethylhexyl) sebacate (DEHS) and bis(2-ethylhexyl) phthalate (DEHP) from T = (293.15 to 353.15) K and up to 30 MPa. The experimental device was adapted for viscous liquids at high pressure and it can measure heat capacities with an estimated total uncertainty better than 1%. The isobaric heat capacity values were analysed together with their temperature and pressure dependences. In addition, a fitting equation of the experimental molar isobaric heat capacity for these viscous fluids as a function of temperature and pressure was proposed.     

The study of thermal decomposition kinetics of zinc oxide formation from zinc oxalate dihydrate

This study is devoted to the thermal decomposition of ZnC₂O₄·2H₂O, which was synthesized by solid-state reaction using C₂H₂O₄·2H₂O and Zn(CH₃COO)₂·2H₂O as raw materials. The initial samples and the final solid thermal decomposition products were characterized by Fourier transform infrared and X-ray diffraction. The particle size of the products was observed by transmission electron microscopy. The thermal decomposition behavior was investigated by thermogravimetry, derivative thermogravimetric and differential thermal analysis. Experimental results show that the thermal decomposition reaction includes two stages: dehydration and decomposition, with nanostructured ZnO as the final solid product. The Ozawa integral method along with Coats–Redfern integral method was used to determine the kinetic model and kinetic parameters of the second thermal decomposition stage of ZnC₂O₄·2H₂O. After calculation and comparison, the decomposition conforms to the nucleation and growth model and the physical interpretation is summarized. The activation energy and the kinetic mechanism function are determined to be 119.7 kJ mol^?1 and G(α) = ?ln(1 – α)^1/2, respectively.     

Structure,thermal stability and decomposition of bis-allyl-zinc compounds

The structure, thermal stability and decomposition of solutions of diallylzinc (I), bis(2-methylallyl)zinc (II), bis(3-methylallyl)zinc (III) and bis(3,3-dimethylallyl)zinc (IV) in deuterated solvents, have been investigated by¹H NMR and by kinetic measurements at temperatures between ?125 and +180°C. At room temperature I, II, III and IV are dynamic systems and are best described as being rapidly equilibrating mixtures of all isomeric σ-allyl forms; the NMR spectra are averages weighted according to the relative concentrations of the respective forms. I displays a¹H NMR spectrum of a static σ-allyl system only below ?125°C and II only below ?115°C. At temperatures above 100°C the thermal decomposition of I–IV results in coupling of the allyl groups, decomposition via radicals being the major process. The coupled products exhibit CIDNP, in which the multiplet polarisations confirm a decomposition via randomly diffusing allyl radicals. In the allyl radicals CH₂CR¹CR²R³ an alternating spin density was proved experimentally. The thermal stability decreases in the order I > II > III > IV.     

Solid‐phase extraction based on chloromethylated polystyrene magnetic nanospheres followed by gas chromatography with mass spectrometry to determine phthalate esters in beverages

An ultrasound‐assisted magnetic solid‐phase extraction procedure with chloromethylated polystyrene‐coated Fe₃O₄ nanospheres as magnetic adsorbents has been developed to determine eight phthalate esters (bis(4‐methyl‐2‐pentyl) phthalate, dipentyl phthalate, dihexyl phthalate, benzyl butyl phthalate, bis(2‐butoxyethyl) phthalate, dicyclohexyl phthalate, di‐n‐octyl phthalate, and dinonyl phthalate) simultaneously in beverage samples, in combination with gas chromatography coupled to tandem mass spectrometry for the first time. Several factors related to magnetic solid‐phase extraction efficiencies, such as amount of adsorbent, extracting time, ionic strength, and desorption conditions were investigated. The enrichment factors of the method for the eight analytes were over 2482. A good linearity was observed in the range of 10–500 ng/L for bis(2‐butoxyethyl) phthalate and 2–500 ng/L for the other phthalate esters with correlation coefficients ranging from 0.9980 to 0.9998. The limits of detection and quantification for the eight phthalate esters were in the range of 0.20–2.90 and 0.67–9.67 ng/L, respectively. The mean recoveries at three spiked levels were 75.8–117.7%, the coefficients of variations were <11.6%. The proposed method was demonstrated to be a simple and efficient technique for the trace analysis of the phthalate esters in beverage samples.     

Micro-determination of total phthalate esters in biological samples by gas-liquid chromatography.

A method was investigated in which all of the phthalate esters in biological samples were determined as phthalic acid by gas-liquid chromatography. The method is based on the separation of phthalate esters from the sample with n-hexane, saponification of the esters with an alkaline ethanolic solution to give phthalic acid, purification of the acid by extraction with diethyl ether and column chromatography using silica gel, and conversion of the acid into bis(2,2,2-trifluoroethyl) phthalate with a 2,2,2-trifluoroethanol solution containing boron trifluoride. The derivative obtained is highly sensitive to an electron-capture detector, giving a sensitivity of 0.1 pg. Biological samples fortified with di(2-ethylhexyl) phthalate at levels of 5-100 ppb were analyzed, with recoveries of 70-100%.     

Influence of polyesterurethane plasticizer on the kinetics of poly(vinyl chloride) decomposition process

Poly(vinyl chloride) (PVC), plasticized by di(2-ethylhexyl) phthalate (DEHP), medium molecular mass polyesterurethane (PU) or by both plasticizers, was thermally degraded under dynamic thermogravimetric conditions and the kinetics of decomposition was studied by isoconversional methods and by non-linear regression. It has been found that the initial decomposition temperature is higher for PVC plasticized with PU, as compared with PVC plasticized with di(2-ethylhexyl) phthalate (DEHP) or plasticized with PU/DEHP, and thermal degradation shows features of a multi-step complex process. Application of polymeric plasticizer leads to the increase and a 'smoothing' effect in the course of energy of activation and pre-exponential factor at the initial stage of decomposition indicating thus the hindered migration of medium molecular mass compound from PVC matrix (in comparison with PVC containing monomeric DEHP) due to steric hindrances as well as due to specific interactions between C=O and Cl groups along the macrochains. Kinetic model function of the decomposition process of PVC/DEHP and PVC/DEHP/PU blends was found to be a two-stage autocatalyzed reaction of n^th order; autocatalytic effect is associated most likely with the role of HCl formed during PVC decomposition. For PVC/PU blend best fit was found by non-linear regression for a two-stage scheme in which first stage was Prout-Tompkins model and the second was autocatalytical model of n^th order - the first one involves particle disintegration, which was promoted by product generation at branching PVC 'pseudo-crystals' nuclei, thus exposing more surface on which decomposition reaction proceeds.     

Kinetic parameters for thermal decomposition of hydrazine

The propulsion of most of the operating satellites comprises monopropellant (hydrazine––N₂H₄) or bipropellant (monometilydrazine—MMH and nitrogen tetroxide) chemical systems. When some sample of the propellant tested fails, the entire sample lot shall be rejected, and this action has turned into a health problem due to the high toxicity of N₂H₄. Thus, it is interesting to know hydrazine thermal behavior in several storage conditions. The kinetic parameters for thermal decomposition of hydrazine in oxygen and nitrogen atmospheres were determined by Capela–Ribeiro nonlinear isoconversional method. From TG data at heating rates of 5, 10, and 20 °C min^?1, kinetic parameters could be determined in nitrogen (E = 47.3 ± 3.1 kJ mol^?1, lnA = 14.2 ± 0.9 and T _b = 69 °C) and oxygen (E = 64.9 ± 8.6 kJ mol^?1, lnA = 20.7 ± 3.1 and T _b = 75 °C) atmospheres. It was not possible to identify a specific kinetic model for hydrazine thermal decomposition due to high heterogeneity in reaction; however, experimental f(α)g(α) master-plot curves were closed to F _1/3 model.     

Determination of Phthalates in Beverages by Headspace SPME-GC Using Calix[6]arene Fiber

A headspace solid-phase microextraction, in conjunction with gas chromatography using a novel sol–gel calix[6]arene-contained fiber for the determination of phthalate acid esters in non-alcoholic beverages is described for the first time. A Taguchi’s L₂₅ (5⁶) orthogonal array experimental design was introduced to optimize the extraction parameters such as extraction temperature, extraction time, salt concentration and stirring speed. Under the optimized conditions, the method showed linear response of three to five orders of magnitude with correlation coefficients (r) better than 0.995. Owing to the good selectivity and high sensitivity of this fiber to phthalate acid esters, the extraction was carried out in real beverage matrix and low detection limits of 0.015–0.298 μg L^?1 were achieved. The recoveries of standard addition tests amounted to 87.9–108.3% and the relative standard deviation values varied from 9.62 to 15.2%. The method was applied to the analysis of 12 kinds of beverages and bis-2-ethylhexyl phthalate was the sole analyte detected in these samples.     

Synthesis of bis(2-ethylhexyl) phthalate over methane sulfonic acid catalyst. Kinetic investigations

The kinetic model for the synthesis of bis(2-ethylhexyl) phthalate from phthalic anhydride and 2-ethylhexanol in the presence of methane sulfonic acid as a catalyst has been derived, based on the investigation carried out in an isothermal, semibatch reactor. The first step, the formation of mono(2-ethylhexyl) phthalate, is very fast and irreversible. The second step, the esterification of monoester with 2-ethylhexanol, is relatively slow and needs a catalyst. The second reaction appears to be of the first order with respect to mono(2-ethylhexyl) phthalate and does not depend on the concentration of alcohol.     

Thermal decomposition of 1,3,3-trinitroazetidine in the gas phase, solution, and melt

1,3,3-Trinitroazetidine (TNAZ) was synthesized using the alternative approach based on the transformation of 3-oximino-1-(p-toluenesulfonyl)azetidine in the reaction with nitric acid through intermediate pseudonitrol. The thermal decomposition of TNAZ in the gas phase, melt and m-dinitrobenzene solution in a wide concentration range (5–80%) was studied by manometry, volumetry, thermogravimetry, IR spectroscopy, and mass spectrometry. In the gas phase in the temperature range from 170 to 220°C the thermal decomposition proceeds according to the first-order kinetic law with the activation energy 40.5 kcal mol^?1 and pre-exponential factor 10^15.0 s^?1. The major gaseous reaction products are N₂, NO, NO₂, CO₂, H₂O, and nitroacetaldehyde, and trace amounts of CO and HCN are formed. The rate-determining step of the process is the homolytic cleavage of the N-NO₂ bond in the TNAZ molecule. In melt at 170–210 °C the thermal decomposition proceeds with the pronounced self-acceleration and the maximum reaction rates are observed at conversions 53.9–67.4%. The solid decomposition products accelerate the reaction. It is most likely that the autocatalysis of TNAZ decomposition in the liquid phase is due to the autocatalytic decomposition of 1-nitroso-3,3-dinitroazetidine, which is formed by the thermal decomposition of TNAZ. In m-dinitrobenzene TNAZ also decomposes with self-acceleration. The higher the concentration in the solution, the more pronounced the self-acceleration. Additives of picric acid moderately accelerate the thermal decomposition of TNAZ, whereas hexamethylenetetraamine additives exert a strong acceleration.     

Thermal decomposition behavior, kinetics, and thermal hazard evaluation of CMDB propellant containing CL-20 by microcalorimetry

The thermal decomposition behavior of composite modified double-base propellant containing hexanitrohexaazaisowurtzitane (CL-20/CMDB propellant) was studied by microcalorimetry. The kinetic and thermodynamic parameters were obtained from the analysis of the heat flow curves. The effect of different proportion of CL-20 to the thermal decomposition behavior, kinetics, and thermal hazard was investigated at the same time. The critical temperature of thermal explosion (T _b), the self acceleration decomposition temperature (T _SADT), and the adiabatic decomposition temperature rise (??T _ad) were calculated to evaluate the thermal hazard of the CL-20/CMDB propellant. It shows that the CMDB propellant with 38% CL-20 has relative lower values of E and lgA, and with 18% CL-20 has the highest potential hazard.     

Preparation and performance of plasticizers for poly(vinyl chloride) from products of thermal decomposition of waste polystyrene

2,4-Diphenylbutyl-2,4-diphenylbutyrate (DPBDPB) and 2,4,6-triphenylhexyl-2,4,6-triphenylhexoate (TPHTPH), plasticizers for poly(vinyl chloride), were synthesized from the products of thermal decomposition of waste polystyrene. Their heat stabilities were studied by thermogravimetric analysis and differential thermal analysis, and compared with those of typical plasticizers for PVC such as dibutyl phthalate (DBP), dihexyl phthalate (DHP) and bis(2-ethylhexyl) phthalate (DOP). DPBDPB and TPHTPH showed much higher heat resistance than DOP. PVC was plasticized with a mixed system consisting of DOP as the primary plasticizer and DPBDPB as the secondary. It became clear that DPBDPB is an excellent heat-resistant plasticizer which does not affect the compatibility of PVC with DOP.     

Determination of phthalate esters from environmental water samples by micro‐solid‐phase extraction using TiO2 nanotube arrays before high‐performance liquid chromatography

We describe a highly sensitive micro‐solid‐phase extraction method for the pre‐concentration of six phthalate esters utilizing a TiO₂ nanotube array coupled to high‐performance liquid chromatography with a variable‐wavelength ultraviolet visible detector. The selected phthalate esters included dimethyl phthalate, diethyl phthalate, dibutyl phthalate, butyl benzyl phthalate, bis(2‐ethylhexyl)phthalate and dioctyl phthalate. The factors that would affect the enrichment, such as desorption solvent, sample pH, salting‐out effect, extraction time and desorption time, were optimized. Under the optimum conditions, the linear range of the proposed method was 0.3–200 μg/L. The limits of detection were 0.04–0.2 μg/L (S/N = 3). The proposed method was successfully applied to the determination of six phthalate esters in water samples and satisfied spiked recoveries were achieved. These results indicated that the proposed method was appropriate for the determination of trace phthalate esters in environmental water samples.     

Determination of phthalate esters in soil by microemulsion electrokinetic chromatography coupled with accelerated solvent extraction

A novel method using microemulsion electrokinetic chromatography combining accelerated solvent extraction was developed for quantitative analysis of six phthalate esters (PAEs) including dimethyl phthalate, diethyl phthalate, dibutyl phthalate, benzyl butyl phthalate, bis(2-ethylhexyl) phthalate, as well as dioctyl phthalate. The effect of each individual component within the microemulsions, i.e. oil phase, surfactant and co-surfactant on resolution of the analytes was systematically studied. Baseline separation of six PAEs was achieved within 26?min by using the microemulsion buffer containing a 60?mmol/L borate buffer at pH 9.0, 0.5% v/v n-octane as oil droplets, 100?mmol/L sodium cholate as surfactant and 5.0% v/v 1-butanol as co-surfactant. The purposed accelerated solvent extraction-microemulsion electrokinetic chromatography method was successfully applied to the determination of trace amount of PAEs in soil samples collected from three different fields in areas of Fujian Province and the contents of dimethyl phthalate, diethyl phthalate, dibutyl phthalate, benzyl butyl phthalate, bis(2-ethylhexyl) phthalate and dioctyl phthalate were 0.63-0.68, 0.32-0.63, 2.53-3.96, 0-1.75, 7.32-11.7 and 0-3.46mg/kg, respectively. It was validated that the results were consistent with those obtained by GC-MS method.     

High‐performance liquid chromatography separation of phthalate acid esters with a MIL‐53(Al)‐packed column

In this study, a MIL‐53(Al)‐packed column was successfully prepared and firstly applied to separate phthalate acid esters (butyl benzyl phthalate, di‐n‐butyl phthalate, diethyl phthalate, bis(2‐ethylhexyl) phthalate, and dimethyl phthalate). Their baseline separation could be achieved within 12 min with a mobile phase of methanol/H₂O ratio at 92:8, and the temperature and flow rate was 40°C and 0.6 mL/min, respectively. The stacking effect and electrostatic force were the key factors in the separation. Moreover, there was a substantial linear relation between the peak height, peak area, and the analyte mass, and the relative standard deviations of retention time, peak height, peak area, and half peak width for five replicate separations of the analytes were within the ranges 0.31–0.88%, 0.72–1.52%, 1.33–1.53%, and 0.46–0.95%, respectively. The results of the calculation of the thermodynamics parameters showed that the separation of phthalate acid esters was controlled by both enthalpy change (ΔH) and entropy change (ΔS).     

Centrifugeless ultrasound‐assisted emulsification microextraction based on salting‐out phenomenon followed by high‐performance liquid chromatography for the simple determination of phthalate esters in aqueous samples

A fast, sensitive, and centrifugeless ultrasound‐assisted emulsification microextraction followed by a high‐performance liquid chromatography method is developed for the determination of some phthalate esters in aqueous samples. In this method, a simple approach is followed to eliminate the centrifugation step in dispersive liquid–liquid microextraction using an organic solvent whose melting point is near the ambient temperature, consumption of the extracting solvent is efficiently reduced, and the overall extraction time was found to be only 7 min. The variables affecting the method are optimized. Under the optimal experimental conditions (75 μL of 1‐undecanol, a flow rate of 2.0 mL/min, and an ultrasound irradiation of 1 min), the proposed method exhibits good preconcentration factors (52–97), low limits of detection (1.0–5.0 ng/mL), and linearities in the range of 5–1500 ng/mL (r ² ≥ 0.995). Finally, the method is successfully applied to the analysis of phthalate esters in the drinking and river water samples. To study the probable release of the phthalate esters from a polyethylene container into boiling water, the boiling water exposed to the polyethylene container was analyzed by the proposed method.