稀土Ce掺杂对ZnO结构和光催化性能的影响

采用共沉淀-焙烧法合成了一系列不同含量的稀土Ce掺杂的ZnO光催化剂. 利用傅里叶变换红外(FT-IR)光谱、粉末X射线衍射(XRD)、扫描电镜(SEM)、紫外-可见(UV-Vis)光谱、光致发光(PL)谱等技术对所制备的光催化剂进行了系列表征. 以酸性橙II脱色降解为模型反应, 考察了掺杂不同含量的铈及不同焙烧温度对ZnO的物理结构和光催化脱色性能的影响. 结果表明: 掺入质量分数(w)为2%的铈可以明显改善氧化锌表面状态, 有利于产生更多的表面羟基; 同时可以抑制光生电子与光生空穴(e^-/h⁺)的复合, 显著提高光催化脱色活性和光催化稳定性; 焙烧温度对光催化剂的晶体结构、表面性能和光催化活性产生较大影响, 500 °C的焙烧处理使样品的结晶度较高, 同时催化剂颗粒粒径较细, 表面具有丰富的羟基. 但过高的焙烧温度(600-800 °C)将导致催化剂的物理结构发生恶化, 降低光催化性能.     

稀土Ce掺杂对ZnO结构和光催化性能的影响

采用共沉淀-焙烧法合成了一系列不同含量的稀土Ce掺杂的ZnO光催化剂. 利用傅里叶变换红外(FT-IR)光谱、粉末X射线衍射(XRD)、扫描电镜(SEM)、紫外-可见(UV-Vis)光谱、光致发光(PL)谱等技术对所制备的光催化剂进行了系列表征. 以酸性橙II脱色降解为模型反应, 考察了掺杂不同含量的铈及不同焙烧温度对ZnO的物理结构和光催化脱色性能的影响. 结果表明: 掺入质量分数(w)为2%的铈可以明显改善氧化锌表面状态, 有利于产生更多的表面羟基; 同时可以抑制光生电子与光生空穴(e^-/h⁺)的复合, 显著提高光催化脱色活性和光催化稳定性; 焙烧温度对光催化剂的晶体结构、表面性能和光催化活性产生较大影响, 500 °C的焙烧处理使样品的结晶度较高, 同时催化剂颗粒粒径较细, 表面具有丰富的羟基. 但过高的焙烧温度(600-800 °C)将导致催化剂的物理结构发生恶化, 降低光催化性能.     

Structural,optical and photocatalytic activity of cerium doped zinc aluminate

Zinc aluminate and cerium-doped zinc aluminate nanoparticles are synthesised by co-precipitation method. Ammonium hydroxide is used as a precipitating agent. The synthesised compounds are characterised by powder X-ray diffraction (XRD), Fourier transform Infrared spectroscopy (FT-IR), Ultraviolet diffuse reflectance spectroscopy (UV-DRS), Thermogravimetric analysis (TGA), Scanning electron microscopy (SEM) and Surface area measurements. The photocatalytic activity of zinc aluminate and cerium doped zinc aluminate nanoparticles are studied under the UV light and visible light taking methylene blue as a model pollutant. The amount of catalyst, concentration of dye solution and time are optimised under UV-light. Degradation of methylene blue under the UV-light is found to be 99% in 20 min with 10 mg of cerium doped catalyst. Compared to visible light degradation, the degradation of dye under UV-light is higher. Cerium doping in zinc aluminate (ZnAl₂O₄:Ce³⁺) increased the photocatalytic activity of zinc aluminate.     

Extending photocatalytic activity of TiO2 nanoparticles to visible region of illumination by doping of cerium

Cerium-doped Titanium dioxide (TiO(2)) nanoparticles are prepared by sol-gel method. Doping shifts the UV absorption edge of TiO(2) to the visible region, making it efficient for visible light photocatalysis. Incorporation of cerium decreases the effective band gap of TiO(2) and increases the Urbach energy levels. At the dopant concentrations of 0.015 and 0.025 mol the luminescence intensity increases compared to undoped TiO(2); however, the luminescence is quenched at 0.035 mol. Quenching of luminescence indicates efficient separation of charge carriers. Undoped TiO(2) is showing poor performance in the photocatalytic degradation of methyl orange under visible light. However, on cerium doping its photoactivity is increased, and is drastically enhanced at 0.035 mol of cerium. Further increase in Ce(3+) doping level to 0.045 mol results in the reduction of the photodegradation of the dye. On UV irradiation, entire samples show good photocatalytic activity up to 30 min, but their efficiency decreases when irradiation time is increased to 45 min. Irradiation for longer time results in negative charging of the TiO(2) surface with migrating electrons. The negatively charged surface repels the OH(-) ion and O(2) molecule from adsorbing on its surface thus decreasing the availability of hydroxyl and superoxide radical for dye degradation.     

Micelle‐Directing Synthesis of Ag‐Doped WO3 and MoO3 Composites for Photocatalytic Water Oxidation and Organic‐Dye Adsorption

In this paper, an Ag‐doped WO₃ (and MoO₃) composite has been prepared by following a simple micelle‐directed method and high‐temperature sintering route. The as‐prepared samples were characterized by X‐ray diffraction, inductively coupled plasma, transmission electron microscopy, X‐ray photoelectron spectroscopy, UV/Vis diffuse reflectance spectroscopy, Brunauer–Emmett–Teller, photoluminescence spectroscopy, and electrochemical impedance spectroscopy techniques. The photocatalytic experiments reveal that their oxygen‐production rates are up to 95.43 μmol (75.45 μmol) for Ag‐doped WO₃ (MoO₃), which is 9.5 (7.3) times higher than that of pure WO₃: 9.012 μmol (MoO₃: 9.00 μmol) under visible‐light illumination (λ ≥420 nm), respectively. The improvement of their photocatalytic activity is attributed to the enhancement of their visible‐light absorption and the separation efficiency of photogenerated carriers by Ag doping. Moreover, Ag‐doped WO₃ (MoO₃) also shows excellent adsorption of rhodamine B (RhB) and methylene blue (MB) in aqueous solution, with maximum adsorption capacities towards RhB and MB of 822 and 820 mg g⁻¹ for Ag‐doped WO₃, and 642 and 805 mg g⁻¹ for Ag‐doped MoO₃, respectively.     

Preparation, phase transformation and photocatalytic activities of cerium-doped mesoporous titania nanoparticles

Cerium-doped mesoporous TiO₂ nanoparticles with high surface area and thermal stable anatase wall were synthesized via hydrothermal process in a cetyltrimethylammonium bromide (CTAB)/Ti(SO₄)₂/Ce(NO₃)₄/H₂O system. The obtained materials were characterized by XRD, FESEM, HRTEM, FTIR spectroscopy, nitrogen adsorption and DRS spectra. Experimental results indicated that the doping of cerium not only increased the surface area of mesoporous TiO₂ nanoparticles, but also inhibited the mesopores collapse and the anatase-to-rutile phase transformation. Moreover, the undoped, doped anatase mesoporous nanoparticles exhibit higher photocatalytic activity than commercial photocatalyst (Degussa, P25), but the maximum photodegradation rate corresponds to the undoped mesoporous TiO₂ nanoparticles. The lower photocatalytic activities of cerium-doped samples compared with undoped one may be ascribed to that the doped cerium partially blocks titania's surface sites available for the photodegradation and absorption of Rhodamine B (RB).     

Effect of dopant concentration on photocatalytic activity of TiO2 film doped by Mn non-uniformly

The thin films of TiO₂ doped by Mn non-uniformly were prepared by sol-gel method under process control. In our preceding study, we investigated in detail, the effect of doping mode on the photocatalytic activity of TiO₂ films showing that Mn non-uniform doping can greatly enhance the activity. In this study we looked at the effect of doping concentration on the photocatalytic activity of the TiO₂ films. In this paper, the thin films were characterized by UV-vis spectrophotometer and electrochemical workstation. The activity of the photocatalyst was also evaluated by photocatalytic degradation rate of aqueous methyl orange under UV radiation. The results illustrate that the TiO₂ thin film doped by Mn non-uniformly at the optimal dopant concentration (0.7 at %) is of the highest activity, and on the contrary, the activity of those doped uniformly is decreased. As a comparison, in 80 min, the degradation rate of methyl orange is 62 %, 12 % and 34 % for Mn non-uniform doping film (0.7 at %), the uniform doping film (0.7 at %) and pure titanium dioxide film, respectively. We have seen that, for the doping and the pure TiO₂ films, the stronger signals of open circuit potential and transient photocurrent, the better photocatalytic activity. We also discusse the effect of dopant concentration on the photocatalytic activity of the TiO₂ films in terms of effective separation of the photon-generated carriers in the semiconductor.     

Optimization and detailed stability study on Pb doped ceria nanocubes for enhanced photodegradation of several anionic and cationic organic pollutants

A series of Pb doped CeO₂ nanocubes with seven different Pb loadings (2–12 mol%) were synthesized via modified hydrothermal technique. The prepared samples were characterized by XRD, XPS, FT-IR, TGA, SEM, HR-TEM, EDS and UV–Vis DRS analysis. According to XRD analysis, the crystalline structure of synthesized pure CeO₂ and Pb-doped CeO₂ samples are cubic structure. The ceria nanocubes showed an increase in amount of oxygen vacancies with increasing the dopant concentrations. When the doping level of Pb is 6 mol%, the optical band gap of Pb-CeO₂ is smaller than that of pure CeO₂ nanocubes. The HR-TEM results confirms the cubic structure of 6% Pb-CeO₂ with average crystallite size of about 15 nm. The photocatalytic ability of Pb-CeO₂ catalysts were studied by degrading several anionic and cationic organic pollutants like methylene blue (MB), methylene orange (MO), methylene red (MR), rhodamine B (RhB), reactive blue 160 (RB160), salicylic acid (SA), coumarin and phenol. The 6% Pb-CeO₂ nanocubes shows better photocatalytic performance against anionic dyes especially for MB. To find the optimum condition for better photocatalytic performance of 6% Pb-CeO₂ nanocubes, the photocatalytic process was conducted in different initial reaction conditions like reaction temperature, catalytic dosage, dye concentration and pH of the reaction solution. The stability and recyclability of 6% Pb-CeO₂ photocatalyst was studied by XRD, FT-IR and EDS analysis after 5 cycles of MB degradation. The hydroxyl radical estimation and trapping experiments were conducted to observe the photocatalytic mechanism process in 6% Pb-CeO₂ nanocubes. The perfect doping concentration for better organic pollutant degradation by Pb-CeO₂ is found to be 6 mol% of Pb.     

Efficient photocatalytic degradation of rhodamine-B by Fe doped CuS diluted magnetic semiconductor nanoparticles under the simulated sunlight irradiation

The present work is planned for a simple, inexpensive and efficient approach for the synthesis of Cu_1-xFe_xS (x = 0.00, 0.01, 0.03, 0.05 and 0.07) nanoparticles via simplistic chemical co-precipitation route by using ethylene diamine tetra acetic acid (EDTA) as a capping molecules. As synthesized nanoparticles were used as competent catalysts for degradation of rhodamine-B organic dye pollutant. The properties of prepared samples were analyzed with energy dispersive analysis of X-rays (EDAX), X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-visible optical absorption spectroscopy, Fourier transform infrared (FTIR) spectra, Raman spectra and vibrating sample magnetometer (VSM). EDAX spectra corroborated the existence of Fe in prepared nanoparticles within close proximity to stoichiometric ratio. XRD, FTIR and Raman patterns affirmed that configuration of single phase hexagonal crystal structure as that of (P6₃/mmc) CuS, without impurity crystals. The average particle size estimated by TEM scrutiny is in the assortment of 5–10 nm. UV-visible optical absorption measurements showed that band gap narrowing with increasing the Fe doping concentration. VSM measurements revealed that 3% Fe doped CuS nanoparticles exhibited strong ferromagnetism at room temperature and changeover of magnetic signs from ferromagnetic to the paramagnetic nature with increasing the Fe doping concentration in CuS host lattice. Among all Fe doped CuS nanoparticles, 3% Fe inclusion CuS sample shows better photocatalytic performance in decomposition of RhB compared with the pristine CuS. Thus as synthesized Cu_0·97Fe_0·03S nanocatalysts are tremendously realistic compounds for photocatalytic fictionalization in the direction of organic dye degradation under visible light.     

Preparation and Characterization of Bismuth Doped TiO2 Thin Films

A series of Bismuth-doped titanium oxide (Bi-doped TiO₂) thin films on glass substrates have been prepared by sol-gel dip coating process. The prepared catalysts were characterized by XRD and XPS. The photocatlytic activity of the thin film catalysts was evaluated through the photodegradation of aqueous methyl orange under UV illumination. The experiments demonstrated that the Bi-doped TiO₂ prepared was anatase phase. The doped bismuth was in the 3⁺ oxidation state. The presence of Bi significantly enhanced the photocatalytic activity of TiO₂ films. At calcination temperature of 500°C, with doping concentration of 2 wt %, Bi-doped TiO₂ thin film showed the highest photocatalyic activity.     

Preparation and characterization of Pd modified CeO2 nanoparticles for photocatalytic degradation of dye

The aim of this work was to investigate the structural and optical properties of bare cerium dioxide (CeO₂) and Pd-doped CeO₂ (0.5, 1.0, 1.5 and 2.0 wt%) photocatalysts prepared by a combination of homogeneous precipitation and the impregnation method. X–ray diffraction analysis indicated that all samples were composed of the cubic fluorite phase of CeO₂. Scanning electron micrographs revealed that all samples provided mostly spherical morphology with high agglomeration and estimated particle sizes ranging from 10 to 20 nm in diameter. The XPS core-level spectra of Pd species after incorporating 2.0 wt% Pd–doped CeO₂ showed double peaks with binding energies of Pd3d_5/2 and Pd3d_3/2 corresponding to the Pd²⁺ oxidation state. The results from diffuse reflectance UV–visible spectroscopy showed that doping with Pd increased the absorbance onset of CeO₂ to a longer wavelength, while the band gap decreased from 3.0 eV to 2.8 eV with 2.0% Pd doping concentration. This was likely due to the creation of impurity levels of Pd²⁺ inside the conduction and valence bands of CeO₂. The photoluminescence spectra (PL) indicated that the emission peak intensity of CeO₂ decreased in the presence of Pd²⁺ dopant in CeO₂. This was associated with a decrease in the electron–hole recombination rate for electronically-excited. Photocatalytic activity for methyl orange dye degradation under visible light irradiation of 1.0 wt% Pd–doped CeO₂ was determined as the optimal doping level with photocatalytic activity 5 times higher than that of bare CeO₂ photocatalyst.     

Co doped ZnO nanowires as visible light photocatalysts

High aspect ratio cobalt doped ZnO nanowires showing strong photocatalytic activity and moderate ferromagnetic behaviour were successfully synthesized using a solvothermal method and characterized by scanning electron microscopy (SEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), X-ray absorption spectroscopy (XAS), vibrating sample magnetometry (VSM) and UV–visible absorption spectroscopy. The photocatalytic activities evaluated for visible light driven degradation of an aqueous methylene orange (MO) solution were higher than for Co doped ZnO nanoparticles at the same doping level and synthesized by the same synthesis route. The rate constant for MO visible light photocatalytic degradation was 1.9·10⁻³ min⁻¹ in case of nanoparticles and 4.2·10⁻³ min⁻¹ in case of nanowires. We observe strongly enhanced visible light photocatalytic activity for moderate Co doping levels, with an optimum at a composition of Zn_0.95Co_0.05O. The enhanced photocatalytic activities of Co doped ZnO nanowires were attributed to the combined effects of enhanced visible light absorption at the Co sites in ZnO nanowires, and improved separation efficiency of photogenerated charge carriers at optimal Co doping.     

Preparation of Ce‐doped TiO2 Hollow Fibers and Their Photocatalytic Degradation Properties for Dye Compound

Cerium‐doped titanium dioxide (TiO₂) with a hollow fiber structure was successfully prepared using ammonium ceric nitrate and tetrabutyltitanate as precursors and cotton fiber as the template. The effects of cerium (Ce)‐doping on the crystallite sizes, crystal pattern, and optical property of the prepared catalysts were investigated by means of techniques such as scanning electron microscopy (SEM), X‐ray diffraction (XRD), BET surface area, and UV‐vis diffuse absorption spectroscopy. SEM observation showed that the prepared TiO₂ fibers possessed fibrous shape inherited from the cotton fiber and had a hollow structure. As confirmed by XRD and UV‐vis diffuse absorption spectroscopy examinations, Ce‐doping restrained the growth of grain size and extended the photoabsorption edge of TiO₂ hollow fiber into the visible light region. The present photocatalyst showed higher photocatalytic reactivity in photodegradation of highly concentrated methylene blue (MB) solutions than pure TiO₂ under UV and visible light, and the amount of Ce‐doped significantly affected the catalytic property. In the experiment condition, the photocatalytic activity of 0.5 mol% Ce‐doped TiO₂ fiber was optimal of all the prepared samples. In addition, the possibility of cyclic usage of the photocatalyst was also confirmed. The material was easily removed by centrifugal separation. Therefore, using the template method and by doping with cerium, TiO₂ may hopefully become a low‐energy consuming, high activity and green environmentally friendly catalytic material.     

The influence of precursor’s composition and concentration on cadmium doped TiO<Subscript>2</Subscript> film

The purpose of this article is to emphasize that new nanomaterials offer a number of attractive alternatives for solar energy use in wastewater photocatalysis. The wastewater from the textile industry contains dyes and heavy metals. Thin films of cadmium doped TiO₂ (Cd-TiO₂) were coated by a doctor blade using TiO₂ Degussa P25 and cadmium precursor (cadmium nitrate). The photocatalytic efficiency of cadmium doped TiO₂ is strongly influenced by crystal structure, particle size, particle morphology, porosity and doping. The pore size distribution and the roughness analysis have been studied by the atomic force microscopy (AFM) of the thin films. The photocatalytic activity of the samples was tested in Methyl orange and Methylene blue photodegradation. Cadmium doped TiO₂ catalyst does not significantly decrease the efficiency of photodegradation processes, and, in some situations, improves dye photodegradation.     

Nitrogen‐doped graphene‐cerium oxide (NG‐CeO2) photocatalyst for the photodegradation of methylene blue in waste water

This study shows a facile approach for the preparation of CeO₂ nanoparticles decorated with porous nitrogen‐doped graphene (NG) nanosheets for effective photocatalytic degradation of methylene blue (MB). NG nanosheets were first synthesized using a hydrothermal method and then nitrogen‐doped graphene‐cerium oxide (NG‐CeO₂) was prepared through mixing of cerium nitrate with different concentrations of NG under ultrasonication followed by hydrothermal treatment. The synthesized nanocomposites were characterized using X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), transmission electron microscopy (TEM), and field emission scanning electron microscopy (FE‐SEM). The photocatalytic activity of the synthesized nanocomposites was analyzed against MB dye. Results showed that the nanocomposites of NG‐CeO₂ have an average particle size of 20 nm. The as‐prepared NG‐CeO₂ nanocomposites exhibited outstanding photocatalytic activity for dye degradation under visible light irradiation, which could be attributed to synergistic effects between the NG nanosheets and CeO₂. The quantum of photodegradation increases with the increase of the NG content in the nanocomposites.     

MoO3改性的TiO2在可见光下催化降解亚甲基蓝

采用浸渍法制备了MoO₃/P25催化剂（MoO₃/P25（x）,x为MoO₃与P25质量比）,用X射线衍射、紫外-可见漫反射光谱、傅里叶变换红外光谱及拉曼光谱等手段对样品进行了表征,并用催化降解亚甲基蓝考察了催化剂在可见光区的催化活性。结果表明,MoO₃在P25表面最大单层负载量对应的MoO₃与P25质量比在0.1左右。单层分散的氧化钼物种与P25之间有较强的相互作用,降低了P25禁带宽度,提高了催化剂对可见光的吸收。当MoO₃与P25质量比大于0.1时,会生成晶相MoO₃,催化剂对可见光的吸收反而随MoO₃担载量增加而降低。催化剂禁带宽度不是决定其可见光下催化降解亚甲基蓝活性的唯一因素。具有适宜禁带宽度和一定晶相MoO₃含量的MoO₃/P25（0.25）表现出最佳活性。     

Chemical synthesis of Ni/TiO<Subscript>2</Subscript> nanophotocatalyst for UV/visible light assisted degradation of organic dye in aqueous solution

The Ni/TiO₂ nanoparticles with different Ni dopant content were prepared by a modified sol–gel method. The structure and photoinduced charge properties of the as-prepared catalysts were determined using X-ray diffraction, transmission electron microscopy, UV–vis diffuse reflectance spectroscopy and surface photovoltage spectroscopy techniques, and the photocatalytic efficiency of these catalysts was tested using an organic dye. It was shown that Ni modification could greatly enhance the photocatalytic efficiency of these nanocomposite catalysts by taking the photodegradation of methyl orange as a model reaction. With appropriate ratio of Ni and TiO₂, Ni/TiO₂ nanocomposites showed the superior photocatalytic activity than the single TiO₂ nanoparticles. Surface photovoltage spectra demonstrated that Ni modification could effectively inhibit the recombination of the photoinduced electron and holes of TiO₂. This electron–hole pair separation conditions are responsible for the higher photocatalytic performance of Ni/TiO₂ nanocomposites in the visible region of electromagnetic spectrum.     

Ce掺杂Bi2MoO6/TiO2纳米纤维异质结的制备及可见光催化性能

以静电纺丝技术制备的TiO₂纳米纤维为基质,通过溶剂热法制备了异质结型稀土Ce掺杂Bi₂MoO₆/TiO₂复合纳米纤维。利用X射线衍射（XRD）、扫描电子显微镜（SEM）、X射线光电子能谱（XPS）、透射电镜（TEM）、紫外-可见漫反射光谱（UV-Vis DRS）以及荧光光谱（PL）等分析测试手段对样品的物相、形貌和光学性能等进行表征。以罗丹明B为模拟有机污染物,研究了样品的可见光催化性能。结果表明：在稀土掺杂样品中,Ce离子进入Bi₂MoO₆晶格,部分取代Bi³⁺,导致晶胞膨胀,晶格畸变,形成缺陷;与TiO₂复合形成异质结,有利于光生电荷的产生、转移和有效分离,从而提高TiO₂纳米纤维的光催化活性。可见光照射180 min,罗丹明B的降解率达到95.1%。经5次循环光催化降解活性基本不变,样品具有良好的光催化稳定性。     

Ce掺杂Bi2MoO6/TiO2纳米纤维异质结的制备及可见光催化性能

以静电纺丝技术制备的TiO_2纳米纤维为基质,通过溶剂热法制备了异质结型稀土Ce掺杂Bi_2MoO_6/TiO_2复合纳米纤维。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)、透射电镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)以及荧光光谱(PL)等分析测试手段对样品的物相、形貌和光学性能等进行表征。以罗丹明B为模拟有机污染物,研究了样品的可见光催化性能。结果表明:在稀土掺杂样品中,Ce离子进入Bi_2MoO_6晶格,部分取代Bi3+,导致晶胞膨胀,晶格畸变,形成缺陷;与TiO_2复合形成异质结,有利于光生电荷的产生、转移和有效分离,从而提高TiO_2纳米纤维的光催化活性。可见光照射180 min,罗丹明B的降解率达到95.1%。经5次循环光催化降解活性基本不变,样品具有良好的光催化稳定性。     

Effect of nitrogen-doping temperature on the structure and photocatalytic activity of the B,N-doped TiO2

B,N-TiO₂ photocatalysts were synthesized by boron doping firstly and subsequently nitrogen doping in NH₃ at variable temperatures. The effects of the nitrogen doping temperature on the structure and photocatalytic activity of the B,N-codoped TiO₂ were investigated. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-vis diffuse reflectance spectrum (DRS), electron paramagnetic resonance (EPR) and X-ray photoelectron spectroscopy (XPS). The photocatalytic activity was evaluated with photocatalytic degradation of methyl orange dye (MO) under visible light and UV-visible light irradiation. The results suggested that the boron and nitrogen can be incorporated into the TiO₂ lattice either interstitially or substitutionally or both, while the Ti-O-B-N structure plays a vital role in photocatalytic activity in visible light region. The optimal nitrogen doping temperature is 550 °C. Higher temperature may form many oxygen vacancies and Ti³⁺ species, resulting in the decrease of photocatalytic activity in visible light.