Spin Polarization and Spin‐Flip Through Phosphorene Superlattice

The spin‐dependent transport properties, including spin polarization and spin‐flip for phosphorene superlattice in the presence of an extrinsic Rashba spin‐orbit interaction (RSOI) based on the transfer matrix method, are studied. The results show that the number of barriers in the superlattice structure plays a dominant role in output spin polarization, which can be used in designing optimized spintronic devices. In addition, by controlling on the Rashba strength, an incident spin‐up electron can be transmitted as a spin‐down electron. Also, it enables to convert the unpolarized incident electronic beam (with zero spin polarization) into an arbitrary output spin polarization, which plays a significant role in qubit circuits.     

Gradient Chiral Metamirrors for Spin‐Selective Anomalous Reflection

Metasurfaces, the phase‐engineered quasi‐2D interfaces, have attracted intensive interest due to their great capabilities in manipulating the reflection, refraction and transmission of electromagnetic waves. Here, we demonstrate the design and realization of a gradient chiral metamirror tailored for spin‐selective anomalous reflection based on the theory of Pancharatnam‐Berry phase. Asymmetric split ring resonators are employed as the basic meta‐atoms for strong circular dichroism. Dispersionless phase discontinuities are achieved by adjusting the orientation of the meta‐atoms, and spin‐dependent absorption is realized by introducing a chiral resonance. Theoretical results predict both broadband beam deflection and spin‐selective absorption for circularly polarized waves in a designer metamirror. Experimental verification of this bifunctional performance is implemented at microwave frequencies and the measured results agree well with the simulation ones. Such chiral metamirrors could pave an avenue towards spin‐selective modulation of the wavefront and might find promising applications in planar electromagnetic devices.     

A Compact Optical Switch via Plasmonics of Subwavelength Circular‐Sharp Hole Arrays in Metal Films

We studied numerically the enhanced optical transmission (EOT) through periodic subwavelength circular‐sharp hole arrays in metallic films with different edge sharp distribution features of unit structures. Detailed studies indicate that the unit structure edge sharp distribution features strongly influence the surface plasmons (SPs). These results demonstrate that the number of edge sharp activated the localized surface plamons (LSP) resonance on the unit structure is changed by rotating the polarization of the incident light, leading to change the infrared transmittance of the array. Moreover, a compact plasmonic switch via periodic circular‐sharp hole arrays based on the dependence of SPs on unit structural edge sharp distributions is proposed. The finding provides a new idea for designing plasmonics devices, and expands the application range of metal micro‐nano structure in the field of optical communications and information processing.     

Frequency‐sensitive switching control effect induced by two‐photon resonance in an EIT‐based layered medium

The optical response of an atomic vapor can be coherently manipulated by tunable quantum interference occurring in atomic transition processes. A periodic layered medium whose unit cells consist of a dielectric and an EIT (electromagnetically induced transparency) atomic vapor is designed for light propagation manipulation. Such an EIT‐based periodic layered medium exhibits a flexible frequency‐sensitive optical response, where a very small change in probe frequency can lead to a drastic variation of reflectance and transmittance. As the destructive quantum interference relevant to two‐photon resonance arises in EIT atoms interacting with both control and probe fields, the controllable optical processes that depend sensitively on the external control field will take place in this EIT‐based periodic layered medium. Such a frequency‐sensitive and field‐controlled optical behavior of reflection and transmission in the EIT photonic crystal can be applicable to designs of new devices such as photonic switches, photonic logic gates and photonic transistors, where one laser field can be controlled by the other one, and would have potential applications in the areas of integrated optical circuits and other related techniques (e.g., all‐optical instrumentations).     

Back focal plane imaging of Tamm plasmons and their coupled emission

The unique optical properties of Tamm plasmons (TPs) – such as flexible wavevector matching conditions including inplane wavevector within the light line, and existing both S‐ and P‐polarized TPs − facilitate them for direct optical excitation. The Tamm plasmon‐coupled emission (TPCE) from a combined photonic–plasmonic structure sustaining both surface plasmons (SPs) and TPs is described in this paper. The sensitivity of TPCE to the emission wavelength and polarization is examined with back focal plane imaging and verified with the numerical calculations. The results reveal that the excited probe can couple with both TPs and SPs, resulting in surface plasmon‐coupled emission (SPCE) and TPCE, respectively. The TPCE angle is strongly dependent on the wavelength allowing for spectral resolution using different observation angles. These Tamm structures provide a new tool to control the optical emission from dye molecules and have many potential applications in fluorescence‐based sensing and imaging.     

Time‐resolved coherent anti‐Stokes Raman spectroscopy impulsively excited by supercontinuum

Time‐resolved coherent anti‐Stokes Raman scattering (CARS) impulsively excited by a supercontinuum (SC) is investigated. We show that it is critical to optimize the temporal overlapping of the constituent solitons of a SC in order to impulsively excite vibrational modes over a broad frequency range. The cross‐correlation frequency‐resolved optical gating technique is utilized to retrieve the optical response function of molecules under SC impulsive excitation, and background‐free CARS with spectral resolution significantly better than the bandwidth of the probe pulses is achieved. Copyright © 2011 John Wiley & Sons, Ltd.     

Alternative difference analysis scheme combining R‐space EXAFS fit with global optimization XANES fit for X‐ray transient absorption spectroscopy

Time‐resolved X‐ray absorption spectroscopy (TR‐XAS), based on the laser‐pump/X‐ray‐probe method, is powerful in capturing the change of the geometrical and electronic structure of the absorbing atom upon excitation. TR‐XAS data analysis is generally performed on the laser‐on minus laser‐off difference spectrum. Here, a new analysis scheme is presented for the TR‐XAS difference fitting in both the extended X‐ray absorption fine‐structure (EXAFS) and the X‐ray absorption near‐edge structure (XANES) regions. R‐space EXAFS difference fitting could quickly provide the main quantitative structure change of the first shell. The XANES fitting part introduces a global non‐derivative optimization algorithm and optimizes the local structure change in a flexible way where both the core XAS calculation package and the search method in the fitting shell are changeable. The scheme was applied to the TR‐XAS difference analysis of Fe(phen)₃ spin crossover complex and yielded reliable distance change and excitation population.     

Resolution Enhancement of Plasmonic Sensors by Metal‐Insulator‐Metal Structures

Optical sensors based on surface plasmons have attracted much attention over the past decades owing to the wealth of applications in bio‐ and chemical and gas sensing. In surface plasmon resonance sensors, a single metal layer is commonly used, but its resolution is limited because of broad resonances. In this context, we have developed a sensor chip based on a stack of metals and a dielectric, e.g. a metal‐insulator‐metal structure, consisting of a thick insulator layer sandwiched by metal layers, that exhibits a sharp resonance due to the excitation of surface plasmon polaritons hybrid modes. We have performed both experiments and theoretical simulations to estimate the enhancement of the sensitivity of such a structure. By changing the refractive index of an aqueous solution of glucose on top of the sensor chip, we found that the use of a metal‐insulator‐metal structure improves the figure of merit of the sensor 7.5 times compared to that of a conventional surface plasmon resonance sensor chip.     

Airy plasmons: non‐diffracting optical surface waves

Airy beams represent an important class of non‐diffracting waves which can be realized on a flat surface. Being generated in the form of surface‐plasmon polaritons, such Airy plasmons demonstrate many remarkable properties: they do not diffract while propagating along parabolic trajectories, and they recover their shape after passing through obstacles. This paper reviews the basic physics of Airy plasmons in both paraxial and non‐paraxial cases, and describes the experimental methods for generation of Airy surface waves on metal surfaces, including a control of their trajectories, as well as the interference of Airy plasmons and hot‐spot generation. Many unusual properties of Airy plasmons can be utilized for useful applications, including plasmonic circuitry and surface tweezers. Picture: Observation of two colliding Airy plasmons.     

Spin–orbit stiffness of the spin‐polarized electron gas

In a spin‐polarized electron gas, Coulomb interaction couples the spin and motion degrees of freedom to build propagating spin waves. The spin wave stiffness S_sw quantifies the energy cost to trigger such excitation by perturbing the kinetic energy of the electron gas (i.e. putting it in motion). Here we introduce the concept of spin–orbit stiffness, S_so, as the energy necessary to excite a spin wave with a spin polarization induced by spin–orbit coupling. This quantity governs the Coulombic enhancement of the spin–orbit field acting of the spin wave. First‐principles calculations and electronic Raman scattering experiments carried out on a model spin‐polarized electron gas, embedded in a CdMnTe quantum well, demonstrate that S_so = S_sw. Through optical gating of the structure, we demonstrate the reproducible tuning of S_so by a factor of 3, highlighting the great potential of spin–orbit control of spin waves in view of spintronics applications. (© 2016 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Tunable On‐Chip Sources with Aperiodic Metasurface

Surface plasmons show tremendous capability in integrated communication, quantum computing and sensing. Excitations and manipulations of surface plasmons are essential in developing integrated photonic devices. Here, a systematic study of tunable emission of surface plasmons with an eightfold quasicrystal metasurface, which acts as an on‐chip source, is presented. It is shown that the quasicrystal structure can switch on or off the surface plasmons propagation channels in the desired direction. Meanwhile, such a quasicrystal structure can be polarization‐dependent or polarization‐independent based on different constituent slit pairs. The proposed quasicrystal design provides more freedom for steering surface plasmons in the launching process. Thus, it may significantly simplify the design and fabrication of integrated plasmonic devices.     

Chirality Driven by Magnetic Dipole Response for Demultiplexing of Surface Waves

Surface electromagnetic waves are characterized by the intrinsic spin‐orbit interaction which results in the fascinating spin‐momentum locking. Therefore, directional coupling of light to surface waves can be achieved through chiral nanoantennas. Here, we show that dielectric nanoantenna provides chiral response with strong spectral dependence due to the interference of electric and magnetic dipole momenta when placed in the vicinity of the metal‐air interface. Remarkably, chiral behaviour in the proposed scheme does not require elliptical polarization of the pump beam or the geometric chirality of the nanoantenna. We show that the proposed ultracompact and simple dielectric nanoantenna allows for both directional launching of surface plasmon polaritons on a thin gold film and their demultiplexing with a high spectral resolution.     

All-silicon chiral metasurfaces and wavefront shaping assisted by interference

Chiral metasurfaces have different electromagnetic responses with circularly polarized lights, showing as circular dichroism and optical activity. Here, a novel kind of all-silicon chiral metasurface is proposed by introducing destructive interference between achiral meta-atoms. The maximum value of circular dichroism spectra can reach 0.49. By adding an antireflective layer at the side of the silicon substrate, the maximum circular dichroism reaches 0.54. What is more, the bandwidth of circular dichroism greater than 0.4 reaches 0.15 THz. Two samples are fabricated to verify the feasibility of this scheme, and the experimental results are in good agreement with the simulations. In addition, the proposed scheme can also be used to generate various interesting functions, such as beam control and vortex generator. This flexible and efficient implementation solution of chiral metasurface can bring new ideas to the development of chiral devices in the future.     

Tunneling‐induced transparency in a chaotic microcavity

A new form of induced transparency enabled by dynamical tunneling coupling of continuous chaos and discrete regular modes in a slightly deformed optical microcavity is demonstrated experimentally. An optical beam is focused on the cavity boundary and tuned on resonance with a high‐Q mode, which leads to destructive interference for the excitation of chaotic field and induces a transparency in the transmission. The experimental results are in excellent agreement with a model based on quantum scattering theory. This tunneling‐induced transparency is accompanied by extremely steep normal dispersion, and holds great potential in slow light and enhanced nonlinear interactions.     

Magnetic non‐volatile flip‐flop with spin‐Hall assistance

A novel multi‐bit non‐volatile flip‐flop (NVFF) written by spin‐Hall‐assisted spin‐transfer torque (STT) is proposed. This NVFF employs perpendicular‐anisotropy MTJs and requires an STT current combined with a spin‐Hall current to write the data. Thanks to the assistance of spin‐Hall effect (SHE), the incubation delay required by the conventional STT switching can be eliminated to achieve fast operation. Our proposed NVFF uses multi‐bit architecture and shows high‐density and low‐energy advantages over hybrid NV/volatile FFs in the application of the NV register file. Sim‐ulation results show that the proposed spin‐Hall‐assisted NVFF saves ～31% storage density and ～32% energy dissipation compared with the conventional STT‐NVFF. Moreover, the reliability of MTJ barrier is enhanced due to the reduction of the write voltage. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

石墨烯等离激元的光学性质及其应用前景

石墨烯等离激元由于其独特的电学可调性、本征低衰减以及局域光场高度增强等特性, 引起了广泛的关注并迅速成长为一门新的学科分支--石墨烯表面等离激元光子学. 本文介绍了石墨烯等离激元的一些基本性质, 包括色散关系、局域的等离激元和传导的等离激元以及石墨烯等离激元对其周边介电环境的敏感性等. 在此基础上, 进一步介绍了石墨烯等离激元在太赫兹到中红外频段的应用, 比如有源光调制器的一些功能器件和增强的红外光谱探测等.     

Sensitivity‐enhancement methods for surface plasmon sensors

Surface plasmon resonance (SPR) sensors have been a mature technology for more than two decades now, however, recent investigations show continuous enhancement of their sensitivity and their lower detection limit. Together with the recent investigations in localized SPR phenomena, extraordinary optical transmission through nanoapertures in metals, and surface‐enhanced spectroscopies, drastic developments are expected to revolutionize the field of optical biosensing. Sensitivity‐enhancement (SE) techniques are reviewed focusing both on the physical transduction mechanisms and the system performance. In the majority of cases the SE is associated with the enhancement of the electromagnetic field overlap integral describing the interaction energy within the analyte. Other important mechanisms are the interaction between plasmons and excitons and between the analyte molecules and the metal surface. The lower detection limit can be reduced significantly if systems with high signal‐to‐noise ratio are used such as common‐path interferometry, ellipsometry or polarimetry systems.     

Anisotropy‐assisted non‐scattering coherent absorption of surface plasmon‐polaritons

The ability to control propagation of electromagnetic guided modes lies at the heart of integrated nanophotonics. Surface plasmon‐polaritons are a class of guided modes which can be employed in integrated optical systems. Here, we present a theoretical design of a coherent surface plasmon absorber which can perfectly harvest energy of coherently incident surface plasmons without parasitic scattering into free space modes. Excitation of free space modes which usually accompanies scattering of a surface plasmon by an interface boundary is avoided due to specially tailored anisotropy of the absorber. The concept of coherent SPP absorber is analyzed numerically for spatially non‐uniform and finite‐size structures. We believe that our results will be important for the development of integrated nanoplasmonic systems.     

Chiral lateral optical force near plasmonic ring induced by Laguerre-Gaussian beam

Owing to the good adjustability and the strong near-field enhancement, surface plasmons are widely used in optical force trap, thus the optical force trap can achieve excellent performance. Here, we use the Laguerre-Gaussian beam and a plasmonic gold ring to separate enantiomers by the chiral optical force. Along with the radial optical force that traps the particles, there is also a chirality-sign-sensitive lateral force arising from the optical spin angular momentum, which is caused by the interaction between optical orbit angular momentum and gold ring structure. By selecting a specific incident wavelength, the strong angular scattering and non-chiral related azimuthal optical force can be suppressed. Thus the chiral related azimuthal optical force can induce an opposite orbital rotation of the trapped particles with chirality of different sign near the gold ring. This work proposes an effective approach for catchingand separating chiral enantiomers.     

Surface‐enhanced Raman scattering from gold‐coated germanium oxide nanowires

We utilized bulk‐synthesized nanowires (NWs) of germanium dioxide as nanoscale structures that can be coated with noble metals to allow the excitation of surface plasmons over a broad frequency range. The NWs were synthesized on substrates of silicon using gold‐catalyst‐assisted vapor–liquid–solid (VLS) growth mechanism in a simple quartz tube furnace setup. The resulting NWs have diameters of ∼100–200 nm, with lengths averaging ∼10–40 µm and randomly distributed on the substrate. The NWs are subsequently coated with thin films of gold, which provide a surface‐plasmon‐active surface. Surface‐enhanced Raman scattering (SERS) studies with near‐infrared (NIR) excitation at 785 nm show significant enhancement (average enhancement > 10⁶) with good uniformity to detect submonolayer concentrations of 4‐methylbenzenethiol (4‐MBT), trans‐1,2‐bis(4‐pyridyl)ethylene (BPE), and 1,2‐benzendithiol (1,2‐BDT) probe molecules. We also observed an intense, broad continuum in the Raman spectrum of NWs after metal coating, which tended to diminish with the analyte monolayer formation. Copyright © 2008 John Wiley & Sons, Ltd.