Ruthenium-catalyzed regiospecific borylation of methyl C-H bonds

We report the regiospecific, ruthenium-catalyzed borylation of saturated terminal C-H bonds. Alkylboronates were obtained in 78-98% yields. The borylations of alkanes, trialkylamines, protected alcohols, and fluoroalkanes occurred regiospecifically at the methyl group that is least sterically hindered. In contrast to most organometallic C-H activation, the reactions of alkanes occurred in higher yields than the reactions of arenes. Reactions were conducted that probed steric and electronic effects on the alkyl borylation. These reactions showed that the borylation occurred preferentially at the methyl group that is least sterically hindered and most electron-deficient. Ruthenium compounds containing boryl ligands were synthesized, and one was characterized by X-ray crystallography. One of these compounds contained a rare bridging boryl ligand and served as a catalyst precursor for the borylation of octane.     

Regioselectivity of the borylation of alkanes and arenes

The borylation of alkanes and arenes has become some of the most practical C-H bond functionalization chemistry. Most striking is the high regioselectivity of these reactions. Rhodium and ruthenium complexes catalyze with exquisite selectivity the borylation of methyl C-H bonds over methylene or methine C-H bonds. Iridium complexes catalyze, with high steric control, the borylation of one aromatic C-H bond over another. In contrast, iridium-catalyzed borylation of heteroaromatic C-H bonds is more controlled by electronic effects. Detailed information on these selectivities and mechanistic information on the origins of this regioselectivity will be described in this critical review (95 references).     

Iridium-catalyzed borylation of secondary C-h bonds in cyclic ethers

The borylation of secondary C-H bonds, specifically secondary C-H bonds of cyclic ethers, with a catalyst generated from tetramethylphenanthroline and an iridium precursor is reported. This borylation occurs with unique selectivity for the C-H bonds located β to the oxygen atoms over the weaker C-H bonds located α to oxygen atoms. Mechanistic studies imply that the C-H bond cleavage occurs directly at the β position rather than at the α position followed by isomerization of a reaction intermediate.     

CX_2(X=H,F,Cl)与甲基异丙基醚C-H键插入反应的理论研究

用从头计算方法在MP2 /6 31G(d)水平上研究了CX2 (X =H ,F ,Cl)与甲基异丙基醚的C -H键插入反应。CCl2 与甲基异丙基醚两个不同的α C的C -H键插入势垒分别为 117.2kJ/mol (甲基 )和 2 0 .6kJ/mol (异丙基 )。CF2 与异丙基α C的C -H键上插入势垒为 12 0 .0kJ/mol,在插入甲基上C -H键时会引起C -O键的断裂。CH2 的插入反应则不需要势垒。对CX2 与二甲醚、甲乙醚、甲基异丙基醚、甲基苄基醚上各种不同的C -H键插入势垒进行了比较 ,甲基和苯基都促使其毗邻的C -H键更容易被CX2 所插入     

Palladium-catalyzed monoselective C-H borylation of acetanilides under acidic conditions

A practical Pd-catalyzed reaction was developed to achieve C-H activation/C-B cross-coupling of acetanilides under acidic conditions. The new reaction shows a good functional group tolerance and an exclusive mono-selectivity. This C-H borylation method may provide a generally applicable route for the conversion of C-H moieties into many other types of bonds.     

Reactivity of the C-H bonds of methyl hexanoate toward the <Emphasis Type="Italic">tert</Emphasis>-butylperoxy radical

The kinetics of oxygen uptake and the kinetics of accumulation of methyl hexanoate oxidation products in the presence of tert-butyl hydroperoxide have been investigated to determine the partial rate constants for the interaction of the tert-butylperoxy radical with C-H bonds of the ester at 373 K. The ester group deactivates the C-H bonds in the 2- and 3-positions and does not deactivate the same bonds in the 5-position, which are similar in reactivity to the methylenic C-H bonds of hydrocarbons. The C-H bonds of the methoxyl group of methyl hexanoate are substantially more reactive than the C-H bonds of the methyl group.     

Catalytic hydroxylation of polypropylenes

The regioselective functionalization of both model and commercial polypropylenes of varying tacticity has been conducted by a rhodium-catalyzed functionalization of the methyl C-H bonds of the polymer with diboron reagents. Rhodium-catalyzed borylation of the polypropylenes, followed by oxidation of the boron-containing material, produced polymers containing 0.2-1.5% hydroxymethyl side chains. Both the number-average molecular weights and molecular weight distributions of the polypropylenes were essentially unchanged after the catalytic and oxidative functionalization process. The efficiency of the borylation process was affected by the molecular weight of the polymer, the steric hindrance around the methyl groups, and the ratio of the diboron reagent to the monomer repeat unit. The hydroxylated derivative of the commercial isotactic polypropylene was used as macroinitiator for the aluminum-mediated ring-opening polymerization of epsilon-caprolactone to prepare polypropylene-graft-polycaprolactone. This graft copolymer was an effective compatibilizer for melt blends of polypropylene and polycaprolactone.     

Iridium-catalyzed C-H borylation-based synthesis of natural indolequinones

An iridium-catalyzed C-H borylation provides the key step in a short synthesis of two indolequinone natural products. This regioselective C-H functionalization strategy delivers 7-borylindoles that undergo facile oxidation-hydrolysis to 7-hydroxyindoles and subsequent oxidation to the desired indolequinones, thereby demonstrating a powerful application of the iridium-catalyzed C-H borylation reaction. A significant result has arisen from the iridium-catalyzed borylation of N-diethylhydrosilyl-6-methoxyindole; even in the presence of a substituent at C6, the N-hydrosilyl group still directs borylation exclusively into the more sterically hindered C7 position in preference to C2.     

Iridium-catalyzed borylation of thiophenes: versatile, synthetic elaboration founded on selective C-H functionalization

Iridium-catalyzed borylation has been applied to various substituted thiophenes to synthesize poly-functionalized thiophenes in good to excellent yields. Apart from common functionalities compatible with iridium-catalyzed borylations, additional functional group tolerance to acyl (COMe) and trimethylsilyl (TMS) groups was also observed. High regioselectivities were observed in borylation of 3- and 2,5-di-substituted thiophenes. Electrophilic aromatic C-H/C-Si bromination on thiophene boronate esters is shown to take place without breaking the C-B bond, and one-pot C-H borylation/Suzuki-Miyaura cross-coupling has been accomplished on 2- and 3-borylated thiophenes.     

Efficient alkyl ether synthesis via palladium-catalyzed, picolinamide-directed alkoxylation of unactivated C(sp3)-H and C(sp2)-H bonds at remote positions

We report the efficient synthesis of alkyl ethers by the functionalization of unactivated sp(3)- and sp(2)-hybridized C-H bonds. In the Pd(OAc)(2)-catalyzed, PhI(OAc)(2)-mediated reaction system, picolinamide-protected amine substrates undergo facile alkoxylation at the γ or δ positions with a range of alcohols, including t-BuOH, to give alkoxylated products. This method features a relatively broad substrate scope for amines and alcohols, inexpensive reagents, and convenient operating conditions. This method highlights the emerging value of unactivated C-H bonds, particularly the C(sp(3))-H bond of methyl groups, as functional groups in organic synthesis.     

Iterative synthesis of 1,3,5-polyphenylene dendrons via C-H activation

An iterative synthesis of 1,3,5-polyphenylene dendrons via C-H activation/Suzuki-Miyaura coupling up to a third generation dendron is described. C-H bonds at the focal points of the dendrons are selectively borylated via iridium-catalyzed borylation, eliminating the need for reactive protecting groups. Sequential additions of low catalyst loadings efficiently borylate higher-generation dendrons, whereas higher initial catalyst loadings are less efficient.     

Iridium-catalyzed C-H activation/borylation/oxidation for the preparation of bis-protected phloroglucinol derivatives

The preparation of bis-protected phloroglucinol derivatives from a range of protected resorcinol substrates is presented. Functionalization was achieved via a two-step, one-pot iridium-catalyzed C-H activation/borylation/oxidation protocol. Our system gave high conversions to the arylboronic esters and good yields of the desired phenols following subsequent oxidation. A range of common protecting group categories was studied including alkyl, silyl, ether and ester.     

Sterically directed functionalization of aromatic C-H bonds: selective borylation ortho to cyano groups in arenes and heterocycles

Ir-catalyzed borylations of 4-substituted benzonitriles are described. In contrast to electrophilic aromatic substitutions and directed ortho metalations, C-H activation/borylation enables functionalization at the 2-position, adjacent to the cyano group, when the 4-subsitutent is larger than cyano. When an excess of borane reagent is used, diborylation can be achieved with a single regioisomer being formed in certain cases. Extension of sterically directed borylation to cyano-substituted, five- and six-membered ring heterocycles is also reported.     

C-H bond activation of hydrocarbons by an imidozirconocene complex

Monomeric imidozirconocene complexes of the type Cp2(L)Zr=NCMe3 (Cp = cyclopentadienyl, L = Lewis base) have been shown to activate the carbon-hydrogen bonds of benzene, but not the C-H bonds of saturated hydrocarbons. To our knowledge, this singularly important class of C-H activation reactions has heretofore not been observed in imidometallocene systems. The M=NR bond formed on heating the racemic ethylenebis(tetrahydro)indenyl methyl tert-butyl amide complex, however, cleanly and quantitatively activates a wide range of n-alkane, alkene, and arene C-H bonds. Mechanistic experiments support the proposal of intramolecular elimination of methane followed by a concerted addition of the hydrocarbon C-H bond. Products formed by activation of sp2 C-H bonds are generally more thermodynamically stable than those formed by activation of sp3 C-H bonds, and those resulting from reaction at primary C-H bonds are preferred over secondary sp3 C-H activation products. There is also evidence that thermodynamic selectivity among C-H bonds is sterically rather than electronically controlled.     

Chemospecific chromium[VI] catalyzed oxidation of C-H bonds at -40 degrees C1

H5IO6 in the presence of catalytic chromoyl diacetate is a powerful method for oxidation of C-H bonds. Tertiary and oxygen activated C-H bonds are oxidized to tertiary alcohols or ketones at temperatures as low as -40 degrees C. The putative reagent is neutral dioxoperoxy chromium[VI] which undergoes C-H oxidation with retention of stereochemistry. This reagent appears to be the first reagent capable of oxidation of a C-H bond in the presence of an olefin without concomitant epoxidation.     

Chemoselective C-H oxidation of alcohols to carbonyl compounds with iodosobenzene catalyzed by (salen)chromium complex

Primary and secondary alcohols with benzylically and allylically activated C-H bonds are chemoselectively oxidized to the corresponding carbonyl compounds by the (salen)Cr(III) complex I as the catalyst and iodosobenzene as the oxygen source; the oxidizing species is the Cr(V) oxo complex. Allylic alcohols with fully substituted double bonds give appreciable amounts of epoxides besides the C-H oxidation products enones, while saturated alcohols are less readily oxidized.     

Highly efficient syntheses of azetidines, pyrrolidines, and indolines via palladium catalyzed intramolecular amination of C(sp3)-H and C(sp2)-H bonds at γ and δ positions

Efficient methods have been developed to synthesize azetidine, pyrrolidine, and indoline compounds via palladium-catalyzed intramolecular amination of C-H bonds at the γ and δ positions of picolinamide (PA) protected amine substrates. These methods feature relatively a low catalyst loading, use of inexpensive reagents, and convenient operating conditions. Their selectivities are predictable. These methods highlight the use of unactivated C-H bond, especially the C(sp(3))-H bond of methyl groups, as functional groups in organic synthesis.     

"One-pot" tandem C-H borylation/1,4-conjugate addition/reduction sequence

A microwave-assisted, one-pot, iridium-catalyzed aromatic C-H borylation/rhodium-catalyzed 1,4-conjugate addition sequence provides a highly robust protocol suitable for high-throughput array synthesis. Selective formation of either β-aryl-substituted ketones or the corresponding alcohols can be achieved in good overall yields by simple variation of the reaction conditions.     

Rh-catalyzed ortho-selective C-H borylation of N-functionalized arenes with silica-supported bridgehead monophosphine ligands

Supported phosphine-Rh systems, prepared in situ from silica-supported bridgehead monophosphines and [Rh(OH)(cod)](2), have enabled ortho-selective C-H borylation for a range of arenes containing nitrogen-based directing groups. The regioselectivity was excellent with various N-directing groups, including saturated and unsaturated N-heterocycles, tert-aminoalkyl groups, and imine-type C-N double bonds. The reaction showed significant tolerance toward steric repulsion around the reacting C-H bond. This Rh catalysis complements the Ir-catalyzed ortho-borylation, which is effective for arenes with oxygen-based directing groups.     

Synthesis of masked haloareneboronic acids via iridium-catalyzed aromatic C-H borylation with 1,8-naphthalenediaminatoborane (danBH)

“Masked” areneboronic acids have been prepared by Ir-catalyzed C-H borylation of arenes. A [Ir(OMe)(cod)]₂ complex with a DPPE ligand showed the highest catalytic activity in the C-H borylation of benzene at 80 °C. The reaction system can be applied to substituted arenes, including halogen-substituted arenes. 1,3-Dihalobenzenes undergo the C-H borylation at their 5-positions in a regioselective fashion, affording 3,5-dihaloareneboronic acid derivatives, which serve as useful coupling modules for the convergent dendrimer synthesis.