Comparison of electrophonic and auditory-nerve electroneural responses

Electrophonic and auditory-nerve electroneural responses were recorded from the inferior colliculus of the cat. The electrophonic response appeared at a latency 1.0-1.5 ms later than the electroneural response, due to the time requirements for cochlear transduction. The electrophonic response also demonstrated very slow growth of response amplitude with increasing stimulus current as compared to the electroneural response. Aminoglycoside perfusion of the cochlea eliminated the electrophonic component from the evoked response record and left the electroneural component relatively unchanged, indicating that the electrophonic is an acoustic stimulus that requires an intact auditory end organ for transduction.     

Spectral description of fluctuating electromagnetic fields of solids using a self-consistent approach

A new way to evaluate the spectral-correlation properties of thermal fields of solids is suggested. The principal element here is the surface linear response function of an inhomogeneous electron subsystem of solids. Along with straightforward calculations using the known response functions, the suggested method allows calculating the response functions self-consistently based on the time dependent density functional theory. The self-consistent calculation of the linear response function followed by an application of the fluctuation–dissipation theorem yields spectral power densities of the fluctuating electromagnetic fields.     

Active elasticity of gels with contractile cells

Cells play an active role in the maintenance of mechanical homeostasis within tissues and their response to elastic forces is important for tissue engineering. We predict the collective response of an ensemble of contractile cells in a three-dimensional elastic medium to externally applied strain fields. Motivated by experiment, we model the cells as polarizable force dipoles that change their orientation in response to the local elastic strain. The analogy between the mechanical response of these systems and the dielectric response of polar molecules is used to calculate the elastic response function. We use this analogy to evaluate the average cell orientation, the mean polarization stress, and the effective elastic constants of the material, as a function of the cell concentration and matrix properties.     

Measurement of the frequency response of a diaphragm-based pressure sensor by use of a pulsed excimer laser

We present a novel method for measuring the frequency response of a diaphragm-based optical fiber Fabry-Perot interferometric pressure sensor. The impulse response of the sensor to the radiation pressure generated by an excimer laser pulse is measured. The Fourier transform of the impulse response yields the frequency response of the pressure sensor. Experimental results show that it is a convenient and efficient method for measurement of the frequency response of diaphragm-based pressure sensors.     

Millimeter/submillimeter mixing based on the nonlinear plasmon response of two-dimensional electron systems

The nonlinear plasmon response of a two-dimensional electron system with an incorporated defect to monochromatic and bichromatic microwave radiation has been investigated. The operation of an electronic device (mixer) based on the plasmon response with a record operational speed has been demonstrated and analyzed. It has been found that the system response time is no more than τ = 25 ps. It has been shown that the nonlinear response of the system is caused by a new physical mechanism of nonlinearity induced by the presence of an inhomogeneity in the electron system.     

Calculation of the spectral response of an arrayed-waveguide gating demultiplexer with a wide-angle beam propagation method in a cylindrical coordinate system

The spectral response of an arrayed-waveguide grating (AWG) demultiplexer is calculated by simulating the field propagation in the output section of an AWG with a wide-angle beam propagation method (BPM) in a cylindrical coordinate system. As in a practical design of an AWG demultiplexer, each output waveguide consists of two straight sections connected by a bending section. The spectral response obtained by the present algorithm is more accurate than those obtained with two popular approximate methods, namely, the conventional overlapped integral method and the standard BPM for radially straight and infinitely long output waveguides. With the present algorithm, the dependence of the spectral response on the parameters of the output section is analyzed. The channel crosstalk and the 3 dB passband width of the spectral response depend mainly on the length of the first straight section, the end separation and the angular separation of the output waveguides. The bending section results in an asymmetrical spectral response with remarkable sidelobes which can be reduced by increasing the bending radius.     

Investigations of a nonlinear energy harvester with a bistable potential well

This paper investigates a nonlinear energy harvester that uses magnetic interactions to create an inertial generator with a bistable potential well. The motivating hypothesis for this work was that nonlinear behavior could be used to improve the performance of an energy harvester by broadening its frequency response. Theoretical investigations study the harvester's response when directly powering an electrical load. Both theoretical and experimental tests show that the potential well escape phenomenon can be used to broaden the frequency response of an energy harvester.     

The use of moment equations for calculating the mean square response of a linear system to non-stationary random excitation

The moment equations approach is used to calculate the mean square response of a linear system to non-stationary random excitation which is expressed as a product of a deterministic envelope function and a Gaussian stationary non-white noise. The moment equations are derived by performing single integrations in the time domain and are solved numerically by digital computer. Numerical examples are given for the response of single and two degree-of-freedom systems which are excited by noise with an exponentially decaying harmonic correlation function. It is shown that an overshoot, in the sense that the transient response exceeds its stationary value, may occur even in the case of an exponential envelope function, but that the response does not exhibit overshoot when the natural frequency of the system is almost coincident with the dominant frequency of the input.     

开孔屏蔽腔内传输线负载所受电磁干扰的解析算法

外界电磁场通过孔缝耦合进入屏蔽腔,并经由线缆对腔内电子设备造成干扰,这是电磁兼容中需要考虑的重要问题,而数值法分析此类尺寸跨度大的电磁问题效率过低。基于电磁拓扑和等效电路法,提出一种快速计算外界平面波辐照下开孔屏蔽腔内传输线负载所受电磁干扰的解析算法。首先利用电磁拓扑将整个耦合问题分解为两个独立的子问题:外界平面波辐照下开孔空腔内的耦合场问题与耦合场辐照下孤立传输线的响应问题,然后提出基于等效电路法求解空腔内耦合电场的计算方法,最后利用场线耦合BLT方程求解耦合电场对孤立传输线负载造成的电磁干扰。经CST仿真验证,该解析算法能有效计算任意位置开(多)孔屏蔽腔内任意放置传输线负载所受的电磁干扰。相比于数值法,该解析算法不仅花费更少的计算时间与资源,且能用于参数影响规律的研究。     

The covariance response of linear systems to locally stationary random excitation

A simple method is given for calculating the covariance response of linear, time-invariant systems to random excitation processes which are locally stationary, or approximately so. As an illustration, the method is used to estimate the response of an idealized model of a ten-storey building to non-stationary ground acceleration; the accuracy of the estimated response is assessed by a comparison with the results of a less approximate, but lengthier, general calculation method, previously published.     

The dynamic response of an inhomogeneous plasma diode to an appliedpotential drop

Recent measurements of the response to an applied step voltage in collisionless plasmas have demonstrated the importance of the initial ion density distribution for the resulting time evolution and the formation of electric double layers. The dynamic response of a plasma diode to an applied step voltage is studied by particle-in-cell simulations and an analytical model. It is shown that an ion-density cavity (a local ion-density minimum with a width of many Debye lengths) can support large potential drops for several electron transit times. The potential drop extends over a distance related to the cavity width. When the applied potential drop exceeds a certain critical value, which depends on the cavity depth, the drop instead concentrates in a cathode sheath, which also is the response obtained for homogeneous initial plasma. The existence regions for the two different response in the appropriate parameter plane are found from the simulations and shown to agree with the regions predicted analytically. The analytical potential profiles agree with those simulated     

Nonlinear dispersion of avalanche upconversion

Two-beam coupling measurements of an avalanche upconversion transition in concentrated Tm:LiYF (4) confirm that, despite the resonant nature of the excited-state optical interaction, the induced response is strongly dispersive. This surprising characteristic is shown to be a general feature of avalanche polarization, with an off-resonant process dominating the resonant response.     

自适应光学系统的数值模拟：动态控制过程和频率响应特性

对自适应光学系统的动态控制过程进行了数值模拟。与自动控制理论的解析分析相比,动态控制过程的数值模拟有其优越性。系统的频率响应特性与动态控制性能密切相关,对自适应光学系统的频率响应特性也进行了数值模拟。模拟计算的结果与实验测量结果符合得很好。还实现了多频率成份的同时计算,可以大大提高计算效率。其结果与单频率结果只在低频下有小的差别,可以满足得到带宽和裕量等参数的实用要求。将频率响应特性的模拟计算与长时间曝光斯特列耳（Strehl)比的数值模拟结合,可得到对自适应光学系统性能的有效评估。     

Quantifying the synchronizability of externally driven oscillators

This paper is focused on the problem of complete synchronization in arrays of externally driven identical or slightly different oscillators. These oscillators are coupled by common driving which makes an occurrence of generalized synchronization between a driving signal and response oscillators possible. Therefore, the phenomenon of generalized synchronization is also analyzed here. The research is concentrated on the cases of an irregular (chaotic or stochastic) driving signal acting on continuous-time (Duffing systems) and discrete-time (Henon maps) response oscillators. As a tool for quantifying the robustness of the synchronized state, response (conditional) Lyapunov exponents are applied. The most significant result presented in this paper is a novel method of estimation of the largest response Lyapunov exponent. This approach is based on the complete synchronization of two twin response subsystems via additional master-slave coupling between them. Examples of the method application and its comparison with the classical algorithm for calculation of Lyapunov exponents are widely demonstrated. Finally, the idea of effective response Lyapunov exponents, which allows us to quantify the synchronizability in case of slightly different response oscillators, is introduced.     

Transient spike adding in the presence of equilibria

Many models of neuronal activity exhibit complex oscillations in response to an input from other neurons in a network or to an input from a stimulus. We consider the effect of a single short stimulus on a simple model designed to mimic some features of neuronal dynamics. We focus on the transient response induced by the stimulus, particularly on the spike-adding behaviour of the response. Our main goal is to explain how the transient response is affected by the presence of unstable equilibria. We also investigate the dependence of the number of spikes on the amplitude and duration of the stimulus. In our analysis, we use numerical continuation methods and exploit the presence of different time scales in the model.     

Reflex activation of laryngeal muscles by sudden induced subglottal pressure changes.

In measuring the effect of subglottal pressure changes on fundamental frequency (Fo) of phonation, the effects of changing laryngeal muscle activity must be eliminated. Several investigators have used a strategy in which pulsatile increases of subglottal pressure are induced by pushing on the chest or abdomen of a phonating subject. Fundamental frequency is then correlated with subglottal pressure changes during an interval before laryngeal response is assumed to occur. The present study was undertaken to repeat such an experiment while monitoring electromyographic (EMG) activity of some laryngeal muscles, to discover empirically the latency of the laryngeal response. The results showed a consistent response to each push, with a latency of about 30 ms. Despite this response, analyses of fundamental frequency versus subglottal pressure changes during the interval of constant EMG activity were in general agreement with previously published values. With respect to the nature of the electromyographic response itself, its timing was found to be within the range of latencies appropriate for peripheral feedback, and was also similar to that for an acoustically--or tactually--elicited startle reflex.     

Study of airfoil gust response alleviation using an electro-magnetic dry friction damper. Part 2: Experiment

In Part 1 of this work, a theoretical simulation study of the non-linear gust response of a three degree-of-freedom typical airfoil section with a control surface using an electro-magnetic dry friction damper is presented. For validation of this theoretical model, an electro-magnetic dry friction damper has been designed and an experimental investigation of the gust response has been carried out in a wind tunnel. Results for both periodic and linear frequency sweep gust excitations have been computed and measured. The fair to good quantitative agreement between theory and experiment verifies that the present electro-magnetic dry friction damper can be used to alleviate the gust response, especially for the plunge and pitch responses. It also shows that the present theoretical method can be successfully applied to determine the non-linear gust response when an electro-magnetic dry friction damper is used in the linear aeroelastic system.     

Vibration of a beam due to a random stream of moving forces with random velocity

The problem of dynamic response of a beam to the passage of a train of concentrated forces with random amplitudes and velocities is considered. Force arrivals at the beam are assumed to constitute the point stochastic process of events. Thus, the excitation process is an idealization of vehicular traffic loads on a bridge. An analytical technique is developed to determine the response of the beam. Explicit expressions for the expected value and the variance of the beam deflection are provided. As an example, the response of a beam to a stationary stream of forces is determined for some practical situations, and discussed.     

Leading Order Response of Statistical Averages of a Dynamical System to Small Stochastic Perturbations

The classical fluctuation-dissipation theorem predicts the average response of a dynamical system to an external deterministic perturbation via time-lagged statistical correlation functions of the corresponding unperturbed system. In this work we develop a fluctuation-response theory and test a computational framework for the leading order response of statistical averages of a deterministic or stochastic dynamical system to an external stochastic perturbation. In the case of a stochastic unperturbed dynamical system, we compute the leading order fluctuation-response formulas for two different cases: when the existing stochastic term is perturbed, and when a new, statistically independent, stochastic perturbation is introduced. We numerically investigate the effectiveness of the new response formulas for an appropriately rescaled Lorenz 96 system, in both the deterministic and stochastic unperturbed dynamical regimes.     

Coherent averaging of the passive fathometer response using short correlation time

The passive fathometer algorithm was applied to data from two drifting array experiments in the Mediterranean, Boundary 2003 and 2004. The passive fathometer response was computed with correlation times from 0.34 to 90 s and, for correlation times less than a few seconds, the observed signal-to-noise ratio (SNR) agrees with a 1D model of SNR of the passive fathometer response in an ideal waveguide. In the 2004 experiment, the fathometer response showed the array depth varied periodically with an amplitude of 1 m and a period of 7 s consistent with wave driven motion of the array. This introduced a destructive interference, which prevents the SNR growing with increasing correlation time. A peak-tracking algorithm applied to the fathometer response of experimental data was used to remove this motion allowing the coherent passive fathometer response to be averaged over several minutes without destructive interference. Multirate adaptive beamforming, using 90 s correlation time to form adaptive steer vectors which were applied to 0.34 s data snapshots, increases the SNR of the passive fathometer response.