Characterization of small particles by micro X-ray fluorescence

Micro X-ray fluorescence was used to study both homogeneous and heterogeneous particle systems. Specifically, homogeneous glass microspheres and heterogeneous soil particle samples were prepared by both bulk and single particle sample preparation methods for evaluation by micro X-ray fluorescence. Single particle sample preparation methods allow for single particles from a collected sample to be isolated and individually presented to the micro X-ray fluorescence instrument for analysis. Various particle dispersion methods, including immobilization onto Tacky Dot™ slides, mounting onto double-sided sticky tape affixed to polypropylene film, or attachment to polypropylene film using 3M Artist's Adhesive, were used to separate the sample particles for single particle analysis. These methods were then compared and evaluated for their ability to disperse the particles into an array of single separated particles for optimal micro X-ray fluorescence characterization with minimal background contribution from the particle mounting surface. Bulk methods of particle sample preparation, which included pellet preparation and aerosol impaction, used a large quantity of collected single particles to make a single homogeneous specimen for presentation to the instrument for analysis. It was found that single particle elemental analysis by micro X-ray fluorescence can be performed if the particles are well separated (minimum separation distance = excitation source beam diameter) down to a particle mass of ∼ 0.04 ng and a mean particle diameter of ∼ 0.06 μm. Homogeneous particulates can be adequately characterized by micro X-ray fluorescence using either bulk or single particle analysis methods, with no loss of analytical information. Heterogeneous samples are much harder to characterize, and both single particle as well as bulk analyses must be performed on the sample to insure full elemental characterization by micro X-ray fluorescence.     

X-ray and vibrational spectra on metal complexes with indolecarboxylic acids: Part IV. Catena-poly[{aqua(η2-indole-3-carboxylato-O,O′)zinc}-μ-indole-3-carboxylato-O:O′]

The new zinc(II) coordination polymer catena-poly[{aqua(η²-indole-3-carboxylato-O,O′)zinc}-μ-indole-3-carboxylato-O:O′], [Zn(I3CA)₂(H₂O)]_n [Zn(I3CA)₂(H₂O)]_n has been synthesized and characterized using infrared and Raman spectroscopy and X-ray single-crystal diffraction analysis. The crystals are monoclinic, space group Cc, with a = 33.319(7), b = 5.985(1), c = 8.291(2) Å, V = 1653.1(6) Å³ and z = 4. Each zinc centre is five-coordinated by the bidentate chelating indole-3-carboxylato, one oxygen atom bridging indole-3-carboxylato, water molecule and one oxygen atom bridging indole-3-carboxylato from an adjacent [Zn(I3CA)₂(H₂O)] unit. The Zn–O distances of 1.978(4), 1.987(3), 1.977(4), 1.983(3) and 2.519(4) Å, are typical for distances of such complexes. The infrared and Raman spectroscopic data of [Zn(I3CA)₂(H₂O)]_n in the solid state are supported by X-ray analysis. The theoretical wavenumbers, infrared intensities and Raman scattering activities have been calculated by the density functional methods (B3LYP and mPW1PW) with the D95V^**/LanL2DZ and 6-311++G(d,p)/LanL2DZ basis sets. The theoretical wavenumbers, infrared intensities and Raman scattering activities show a good agreement with experimental. Detailed band assignment has been made on the basis of the calculated potential energy distribution (PED). The results provide information on the strength of zinc-ligand bonding in complex.     

X-ray and infrared spectrum on metal complexes with indolecarboxylic acids: Part V. Catena-poly[{aqua(η2-indole-3-propionato-O,O′)zinc}-η2-:-μ-indole-3-propionato-O,O′:-O]

The catena-poly[{aqua(η²-indole-3-propionato-O,O′)zinc}-η²-:-μ-indole-3-propionato-O,O′:-O], [Zn(I3PA)₂(H₂O)]_n was prepared and characterized by infrared spectroscopy and X-ray structure determination. The crystals are monoclinic, space group Pc, with a = 21.380(2), b = 5.9076(7), c = 8.1215(9) Å, V = 1020.2(2) Å³ and Z = 2. The central zinc atom shows the coordination distorted from ideal octahedral. Each zinc centre is coordinated by two oxygen atoms of the bidentate chelating indole-3-propionato (I3PA), two oxygen atoms tridentate chelating-bridging I3PA, water molecule and one oxygen atom tridentate chelating-bridging I3PA from an adjacent [Zn(I3PA)₂(H₂O)] unit. The infrared spectrum of [Zn(I3PA)₂(H₂O)]_n in the solid state is supported by X-ray analysis. The theoretical wavenumbers and infrared intensities have been calculated by the density functional methods (B3LYP and mPW1PW) with the 6-311++G(d,p)/LanL2DZ basis sets. The theoretical wavenumbers, infrared intensities show a good agreement with experimental data. Detailed band assignment has been made on the basis of the calculated potential energy distribution (PED).     

Quantum chemical calculations and X-ray crystallographic studies of cis-dioxomolybdenum(VI) Schiff base complex

Treatment of the Schiff base 2-((E)-(2-hydroxy propylimino)methyl)phenol with MoO₂(acac)₂ in dry methanol gave the mononuclear complex (methanol{6-[(2-oxidopropyl)iminometh-yl]phenolato}dioxidomolybdenum(VI), which was characterized by X-ray crystal analysis, and it has monoclinic space group p2₁/c, and a = 10.330(17) Å, b = 9.397(15) Å, c = 13.695(2) Å, V = 1252.1(3) Å³, and Z = 4. B3LYP theoretical method with DZP basis sets calculations nicely reproduces the X-ray experimental geometry, molecular orbital levels and the other structural properties for this complex.     

Magnetic and spectroscopic properties of gadolinium tripodal Schiff base complex

Gadolinium(III) tripodal Schiff base (tris(((5-chlorosalicylidene)amino)ethyl)amine) complex has been obtained and investigated by infrared spectroscopy (IR), magnetic susceptibility, and electron paramagnetic resonance (EPR) methods. Comparison of IR bands in ligand and gadolinium complex confirmed the formation of the gadolinium complex and allowed to propose its structure. Both electron ionization and electron spray molecular spectroscopy spectra confirmed the [1:1] proportion of a ligand to metal in gadolinium tripodal Schiff base complex sample. IR spectroscopy and TG–DTA excluded the presence of water molecule in the metal coordination sphere. X-ray powder analysis applying Fullprof computer program has shown that the investigated sample was monophase with the monoclinic symmetry of the unit cell having the lattice constants: a = 10.028(4) Å, b = 13.282(5) Å, c = 21.20(1) Å and β = 101.58(4)°. Space group P21/c, Z = 4. EPR spectra of the complex have been registered in the 4–300 K temperature range. Each spectrum has been fitted using EPR–NMR computer program and the values of the spin-Hamiltonian parameters at each temperature have been calculated. Temperature dependence of the integrated intensity of the EPR spectrum allowed revealing the magnetic interactions in the spin system of this compound. Comparison of the temperature dependence of dc magnetic susceptibility (χ) and EPR susceptibility (χ_EPR) showed significant differences between these quantities due to the presence of short-lived clusters with a non-magnetic ground state.     

Low power capacitively coupled plasma microtorch for simultaneous multielemental determination by atomic emission using microspectrometers

A new, low power capacitively coupled plasma microtorch (30 W, 13.56 MHz, 0.5 L min^?1 Ar) was investigated in conjunction with commercially available microspectrometers for the simultaneous multielemental analysis by atomic emission spectrometry of liquid samples without desolvation. Emission spectrum is simpler than in ICP-AES, the resonance lines are the most intense, so that a microspectrometer with FWHM of at least 1.5 nm is satisfactory for the record. The deviation from the Boltzmann distribution for Fe I has demonstrated the departure from the LTE in plasma. The non-spectral matrix effects of Li, Na, K, Ca and Mg on analytes emission are depressive and depend on matrix volatility, ionization potential of the interferent and analyte excitation energy. The detection limits (μg mL^?1) are in the range 0.003 (Li) and 1.5 (Mn). The use of the standard additions method allowed the simultaneous determination of elements in environmental certified reference materials with overall recovery of 95 ± 10% and relative standard deviation of 1.7–8.2%. Compared to the traditional ICP, the microtorch has a simple construction, runs at low argon flow and can be integrated in a portable system suitable for in-situ simultaneous determination of elements.     

Synthesis,structure and magnetic properties of pyrazolate-bridged dinuclear complexes [{M(NCS)(4-Phpy)}2(μ-bpypz)2] (M = Co2+ and Fe2+)

The synthesis and magnetic characterization of pyrazolato-bridged dinuclear complexes [{M(NCS)(4-Phpy)}₂(μ-bpypz)₂] (Hbpypz = 3,5-bis(2-pyridyl)-pyrazole; 4-Phpy = 4-phenylpyridine; M = Co²⁺ (1) and Fe²⁺ (2)) are described together with the X-ray crystal analysis of the cobalt complex. The structure of 1 shows that the desired coordination has been achieved with the cobalt atoms being coordinated to two bpypz to form the dimer. The X-ray diffraction patterns show 1 and 2 to be isomorphous at room temperature. 2 displays a single spin-crossover transition between the [HS–HS] and [LS–LS] states with T_c = 150 K.     

Preliminary study for producing higher harmonic hard X-rays from weakly ionized nickel plasma

In the plasma flash X-ray generator, a 200 nF condenser is charged up to 50 kV by a power supply, and flash X-rays are produced by the discharging. The X-ray tube is a demountable triode with a trigger electrode, and the turbomolecular pump evacuates air from the tube with a pressure of approximately 1 mPa. Target evaporation leads to the formation of weakly ionized linear plasma, consisting of nickel ions and electrons, around the fine target, and intense Kα lines are left using a 15-μm-thick cobalt filter. At a charging voltage of 50 kV, the maximum tube voltage was almost equal to the charging voltage of the main condenser, and the peak current was about 18 kA. The K-series characteristic X-rays were clean and intense, and higher harmonic X-rays were observed. The X-ray pulse widths were approximately 300 ns, and the time-integrated X-ray intensity had a value of approximately 1.0 mGy at 1.0 m from the X-ray source with a charging voltage of 50 kV.     

Characterization of a new magnesium hydrogen orthophosphate salt,Mg3.5H2(PO4)3, synthesized in supercritical water

Beige crystals of a new magnesium hydrogen orthophosphate salt, Mg_3.5H₂(PO₄)₃, as well as nanoparticles of an amorphous, non-Mg-containing phosphate material, Fe_1−yK_yPO₄ (0 < y < 1), have been produced by hydrothermal reactions in supercritical water (SCW) of equivalent quantities of aqueous MgCl₂·6H₂O (2 M), and K₄P₂O₇ (1 M) in concentrated HCl in a stainless-steel batch reactor at 400–450 °C and 25–32 MPa. The new salt has been characterized by single-crystal X-ray diffraction and IR and Raman spectroscopies. It crystallizes in the triclinic space group Pī, Z = 2 with the following unit-cell parameters: a = 6.438(1), b = 7.856(1), c = 9.438(1) Å; α = 104.57(1), β = 108.61(1), γ = 101.28(1)°, V = 739.99 Å³. The effects of the SCW conditions on the nature of the products and their yields and morphologies have been studied by IR and Raman spectroscopies, X-ray powder diffraction, X-ray energy dispersive analysis, scanning electron microscopy, transmission electron microscopy and inductively coupled plasma analysis.     

Different level of fluorescence in Raman spectra of montmorillonites

The paper presents the study of selected montmorillonite standards by Raman spectroscopy and microscopy supported by elemental analysis, X-ray powder diffraction analysis and thermal analysis. Dispersive Raman spectroscopy with excitation lasers of 532 nm and 780 nm, dispersive Raman microscopy with excitation laser of 532 nm and 100× magnifying lens, and Fourier Transform-Raman spectroscopy with excitation laser of 1064 nm were used for the analysis of four montmorillonites (Kunipia-F, SWy-2, STx-1b and SAz-2). These mineral standards differed mainly in the type of interlayer cation and substitution of octahedral aluminium by magnesium or iron. A comparison of measured Raman spectra of montmorillonite with regard to their level of fluorescence and the presence of characteristic spectral bands was carried out. Almost all measured spectra of montmorillonites were significantly affected by fluorescence and only one sample was influenced by fluorescence slightly or not at all. In the spectra of tested montmorillonites, several characteristic Raman bands were found. The most intensive band at 96 cm⁻¹ belongs to deformation vibrations of interlayer cations. The band at 200 cm⁻¹ corresponds to deformation vibrations of the AlO₆ octahedron and at 710 cm⁻¹ can be assigned to deformation vibrations of the SiO₄ tetrahedron. The band at 3620 cm⁻¹ corresponds to the stretching vibration of structural OH groups in montmorillonites.     

Synthesis,growth, and characterization of a new NLO material 3-(2,3-dimethoxyphenyl)-1-(pyridin-2-yl)prop-2-en-1-one

3-(2,3-Dimethoxyphenyl)-1-(pyridin-2-yl)prop-2-en-1-one (DMPP) a potential second harmonic generating (SHG) has been synthesized and grown as a single crystal by the slow evaporation technique at ambient temperature. The structure determination of the grown crystal was done by single crystal X-ray diffraction study. DMPP crystallizes with orthorhombic system with cell parameters a = 20.3106(8) Å, b = 4.9574(2) Å, c = 13.4863(5) Å, α = 90°, β = 90°, γ = 90° and space group Pca2₁. The crystals were characterized by FT-IR, thermal analysis, UV–vis–NIR spectroscopy and SHG measurements. Various functional groups present in DMPP were ascertained by FTIR analysis. DMPP is thermally stable up to 80 °C and optically transparent in the visible region. The crystal exhibits SHG efficiency comparable to that of KDP.     

Synthesis,structure and properties of Ag2PdO2

The first silver palladium oxide, Ag₂PdO₂, was synthesised from a co-precipitated oxide precursor by annealing at 423–823 K, applying an oxygen pressure of 73 MPa. The crystal structure has been determined from X-ray and neutron powder diffraction data. The new compound crystallises in space group Immm. The lattice constants as determined from X-ray powder diffraction are a=4.55523(5) Å, b=3.00803(3) Å and c=9.8977(1) Å. The crystal structure constitutes a new structure type showing some features in common with the Li₂CuO₂-type. Palladium is found in a nearly square planar arrangement while silver has an almost linear co-ordination. The overall structure can be considered as a rocksalt defect structure. Ag₂PdO₂ is diamagnetic and semiconducting. The band gap, estimated from conductivity measurements in the temperature range of 240–300 K, is 0.18(2) eV.     

Synthesis and properties of the compound: LiNi3/5Cu2/5VO4

The LiNi_3/5Cu_2/5VO₄ is synthesized by solution-based chemical method and its formation has been checked by X-ray diffraction (XRD) study. XRD study shows a tetragonal unit cell structure with lattice parameters of a = 11.6475 (18) Å, c = 2.4855 (18) Å and c/a = 0.2134 Å. Electrical properties are verified using complex impedance spectroscopy (CIS) technique. Complex impedance analysis reveals following points: (i) the bulk contribution to electrical properties up to 200 °C, (ii) the bulk and grain boundary contribution at T ≥ 225 °C, (iii) the presence of temperature dependent electrical relaxation phenomena in the material. D.c. conductivity study indicates that electrical conduction in the material is a thermally activated process.     

High-resolution triple-resonance autoionization of uranium isotopes

The near-threshold autoionization (AI) spectrum of uranium has been investigated by triple-resonance excitation with single-mode continuous lasers. Spectra were recorded over the first ∼30 cm^− 1 above the first ionization limit at a resolution of 3 × 10^− 4 cm^− 1 using intermediate states with different J values (6, 7, 8) to assign AI level total angular momentum J_AI = 5 to 9. Resonances with widths ranging from 8 MHz to 30 GHz were observed; the strongest ones have J_AI = 9 and widths of ∼60 MHz. Hyperfine structures for ²³⁵U and isotope shifts for ^234,235U have been measured in the two intermediate levels and in the final AI level for the most favorable excitation path. These measurements were performed using aqueous samples containing sub-milligram quantities of uranium at natural isotopic abundances, indicating the potential of this approach for trace isotope ratio determinations.     

Synthesis,crystal structure and luminescent properties of pyrovanadates A2CaV2O7 (A = Rb,Cs)

The novel vanadium oxides Rb₂CaV₂O₇ and Cs₂CaV₂O₇ have been prepared by solid-state reaction and their crystal structures determined and refined using X-ray, neutron powder and electron diffraction data. Rb₂CaV₂O₇ and Cs₂CaV₂O₇ are isostructural, crystallizing in space group P2₁/n with unit cell parameters: a = 13.8780(1), b = 5.96394(5), c = 10.3376(1) Å, β = 104.960(1)° and a = 14.0713(2), b = 6.0934(1), c = 10.5944(1) Å, β = 104.608(1)°, respectively. Their crystal structures can be described as a framework of CaO₆ octahedra and V₂O₇ pyrogroups with alkaline metals found in the tunnels formed. Photoluminescence (PL) and PL excitation spectra of the considered pyrovanadates have been studied in the vacuum ultraviolet (VUV) to visible light (Vis) range as well as their pulse cathode luminescence (PCL) spectra and the kinetic parameters of PCL. In the PL and the PCL spectra of both pyrovanadates recorded at T = 300 K a broad band with maxima at 2.2, 2.4 eV and two shoulders (bands) at 2.0 and 2.58 eV have been observed. At T = 10 K the band at 2.0 eV becomes the main band in the spectra. Two types of luminescence centers for each pyrovanadate, with very similar excitation bands at 3.75, 4.84, 6.2, 7.3 and 9.1 eV, have been found. The nature of the luminescence centers connected with the bands at 2.0, 2.2, 2.4 and 2.58 eV is discussed.     

Renewable platform-chemicals and materials: Thermochemical study of levulinic acid

The standard molar enthalpy of formation in the gaseous state (?613.5 ± 2.2) kJ · mol^?1 of levulinic acid has been obtained from combustion calorimetry and results from the temperature dependence of the vapour pressure measured by the transpiration method. In order to verify the experimental data, first-principles calculations have been performed. Enthalpies of formation derived from G4 and G3MP2 methods are in an excellent agreement with the experimental results. Thermodynamic analysis of the hydrolysis of 5-hydroxymethylfurfural to the levulinic and formic acids has revealed very high feasibility of these reactions with equilibrium constants completely shifted to the desired reaction products even at T = 298.15 K.     

In situ growth of LiFePO4 nanorod arrays under hydrothermal condition

A novel in situ combinatorial method has been developed to fabricate LiFePO₄ nanorod arrays, during which anodized alumina oxide (AAO) was employed as the template and ethylene glycol/water medium is used to ensure mass transportation rates of different chemicals to match each other. The samples were then characterized by X-ray diffractometer (XRD), field emission scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED), and energy dispersive X-ray spectroscopy (EDX). After being hydrothermally processed at 160 °C, the highly-crystallized LiFePO₄ arrays were directly obtained, which are composed of single crystal nanorods with a diameter of 200 nm and a length of 3 μm. The reported synthesis is simple, mild and energy-efficient. A noteworthy advantage over conventional sol–gel–template methods is the elimination of high-temperature annealing.     

A novel class of tetrairon(III) single-molecule magnets with graphene-binding groups

Tripods of general formula R’–O–CH₂C(CH₂OH)₃ are excellent site-specific ligands for the preparation of functionalized Fe₄ single-molecule magnets. Herein, we describe the synthesis and characterization of two novel complexes designed to bind graphene surfaces, in which the R group consists of an alkyl spacer –(CH₂)_n– (n = 6 and 10) and a terminal pyrenyl moiety. The site-specific ligand substitution on [Fe₄(OMe)₆(dpm)₆] (Hdpm = dipivaloylmethane) with the new tripods has been studied with ²H NMR on isotopically-enriched samples, revealing that, once formed, these clusters are stable in solution over long timescales. It was not possible to isolate the new compounds as crystalline solids, nevertheless they were chemically characterized by elemental analysis and ¹H NMR. The presence of the pyrenyl ending groups prompted us to investigate the effect of metal complexation on fluorescence, and a full pyrene-to-iron cluster excitation energy transfer was observed. The analysis of the magnetic behaviour revealed an S = 5 ground spin state with a negative zero-field splitting parameter D = ?0.42 cm^?1.     

LIF technique offers the potential for the detection of cadmium-induced alteration in photosynthetic activities of Zea Mays L.

The laser-induced fluorescence spectra of leaves of Zea mays L. plants treated with different concentrations (0.01, 0.10 and 1.00 mM) of cadmium were recorded in region 650–800 nm using 488 nm line of Argon Ion laser as excitation source and PMT as detector. Besides this, blue-green fluorescence and Chl fluorescence were also measured using third harmonic (355 nm) of Nd:YAG laser as excitation source and 320 M monochromator with intensified charge coupled device as a detector in the region 400–800 nm. These spectra have been used to analyse the effect of several doses of cadmium on the photosynthetic activities of Z. mays L. plants. The fluorescence intensity ratios (FIR) of control as well as treated Z. mays L. were calculated by evaluating curve-fitted parameters using Gaussian spectral function. In addition, growth parameters like photosynthetic pigments content were also estimated. The chlorophyll fluorescence intensity ratio F685/F735 excited by both 488 and 355 nm lines are strongly correlated with photosynthetic pigments content (total chlorophyll and carotenoids) and their ratios. Consequently, there also existed a correlation between the blue-green fluorescence intensity ratio F470/F540 and photosynthetic pigments content.     

Ce(H2O)(PO4)3/2(H3O)1/2(H2O)1/2, a second entry in the structural chemistry of cerium(IV) phosphates

A cerium(IV) phosphate has been prepared using precipitation methods and its structure has been solved by single crystal X-ray diffraction (R₁ = 0.0292 for 3092 reflections with I>2σ(I) and wR₂ = 0.0540). Ce(H₂O)(PO₄)_3/2(H₃O)_1/2(H₂O)_1/2 crystallises in the monoclinic space group C2/c (a = 15.7058(17) Å, b = 9.6261(9) Å, c = 10.1632(4) Å, ß = 121.623(7)°, and V = 1308.4 (2) Å³). Its structure is based on a negatively charged 3D framework, made of cerium atoms connected by PO₄ tetrahedra. There are two types of PO₄ units; one shares only corners with the cerium coordination polyhedra while the other one shares edges and corners. This structure also includes hydronium cations, to balance the framework charge, and water molecules. One special feature of this 3D framework is the formation of interconnected tunnels which extend along the c axis and contain the hydronium cations and the water molecules. This open framework and the presence of cationic species in the tunnels are in perfect agreement with the previously reported ion exchange properties.