Ion conductivity studies of blends of poly(methyl methacrylate)-g-poly(ethylene glycol) and poly(ethylene glycol) complexed with LiCF3 SO3

Polymer electrolytes which are adhesive, transparent, and stable to atmospheric moisture have been prepared by blending poly(methyl methacrylate)-g-poly(ethylene glycol) with poly(ethylene glycol)/LiCF₃ SO₃ complexes. The maximum ionic conductivities at room temperature were measured to be in the range of 10⁻⁴ to 10⁻⁵ s cm⁻¹. The clarity of the sample was improved as the graft degree increased for all the samples studied. The graft degree of poly(methyl methacrylate)-g-poly(ethylene glycol) was found to be important for the compatibility between the poly(methyl methacrylate) segments in poly(methyl methacrylate)-g-poly(ethylene glycol) and the added poly(ethylene glycol), and consequently, for the ion conductivity of the polymer electrolyte. These properties make them promising candidates for polymer electrolytes in electrochromic devices. © 1996 John Wiley & Sons, Inc.     

Multidimensional chromatographic techniques for hydrophilic copolymers II. Analysis of poly(ethylene glycol)-poly(vinyl acetate) graft copolymers

A large variety of hydrophilic copolymers is applied in different fields of chemical industry including bio, pharma and pharmaceutical applications. For example, poly(ethylene glycol)-poly(vinyl alcohol) graft copolymers that are used as tablet coatings are responsible for the controlled release of the active compounds. These copolymers are produced by grafting of vinyl acetate onto polyethylene glycol (PEG) and subsequent hydrolysis of the poly(ethylene glycol)-poly(vinyl acetate) graft copolymers. The poly(ethylene glycol)-poly(vinyl acetate) copolymers are distributed with regard to molar mass and chemical composition. In addition, they frequently contain the homopolymers polyethylene glycol and polyvinyl acetate. The comprehensive analysis of such complex systems requires hyphenated analytical techniques, including two-dimensional liquid chromatography and combined LC and nuclear magnetic resonance spectroscopy. The development and application of these techniques are discussed in the present paper.     

Properties of a poly(ethylene glycol)-<Emphasis Type="Italic">block</Emphasis>-poly(<Emphasis Type="Italic">γ</Emphasis>-benzyl <Emphasis Type="SmallCaps">l</Emphasis>-glutamate)-<Emphasis Type="Italic">graft</Emphasis>-poly(ethylene glycol) copolymer membrane

Poly(ethylene glycol)-block-poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) (PEG-block-PBLG-graft-PEG) copolymer was synthesized by the ester exchange reaction of PBLG-block-PEG copolymer with a PEG chain. Surface morphology of the PEG-block-PBLG-graft-PEG copolymer membrane was characterized by atomic force microscopy (AFM). Mechanical and chemical properties of the PEG-block-PBLG-graft-PEG copolymer membrane were investigated by tensile testing and contact angle testing. The effects of grafting ratio on the properties of PEG-block-PBLG-graft-PEG copolymer membrane were primarilly studied.     

Factors of Influencing the Grafting Ratio of Poly(γ-benzyl-L-glutamate)-graft-Poly (ethylene glycol) Copolymer

Poly(γ-benzyl-L-glutamate)-graft-poly(ethylene glycol) (PBLG-graft-PEG) copolymer was synthesized by the ester exchange reaction of PBLG with PEG. Nuclear magnetic resonance (NMR) spectroscopy and scanning electron microscopy (SEM) were used to characterize the structure of PBLG-graft-PEG copolymer. The effects of reaction temperature, reaction time, and the chain length of PEG on the grafting ratio of PBLG-graft-PEG copolymer were investigated.     

Copolymerization of vinyl acetate with 1-octene and ethylene by cobalt-mediated radical polymerization

The cobalt-mediated radical polymerization of vinyl acetate was extended to copolymerization with 1-alkenes (ethylene or 1-octene). In agreement with the low amount of 1-alkene that could be incorporated into the copolymer, a gradient structure was predictable, but a rather low polydispersity was observed. A poly(vinyl acetate)-b-poly(octene) copolymer was also successfully synthesized, leading to a poly (vinyl alcohol)-b-poly(octene) amphiphilic copolymer upon the methanolysis of the poly (vinyl acetate) block. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2532–2542, 2007     

Effects of denaturing acid on the self-association behaviour of poly(ethylene glycol)-block-poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) copolymer in ethanol

Poly(ethylene glycol)-block-poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) (PEG-b-PBLG-g-PEG) copolymer was synthesised by the ester exchange reaction of PEG-block-PBLG copolymer with mPEG. The self-association behaviour of PEG-b-PBLG-g-PEG in mixtures of ethanol, chloroform, and trifluoroacetic acid as denaturing acid was investigated by transmission electron microscopy, nuclear magnetic resonance spectroscopy, FT-IR spectroscopy, dynamic light scattering, and viscometry. It was revealed that the increase in denaturing acid content in the mixed system not only promoted the critical micelle concentration but also changed the morphology of the polymeric micelles from elliptical to spherical.     

Self-assembled tri-block terpolymer blend membranes reinforced with poly(methyl methacrylate)-coated gold nanoparticles obtained through phase inversion technique

The blend membranes of polystyrene-block-polyisoprene-block-polystyrene and polyethylene-block-poly(ethylene glycol)-block-polycaprolactone were designed using the phase inversion technique. The poly(methyl methacrylate)-coated gold nanoparticles are around 40–50 nm in size. The honeycomb-shaped nanopores were uniformly dispersed in polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone/poly(methyl methacrylate)-coated gold nanoparticles blend membranes. There was a 16% increase in tensile strength and a 33% increase in tensile modulus of polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone/poly(methyl methacrylate)-coated gold nanoparticles 1 relative to the neat membrane. With 1 wt% nanoparticles, the membrane showed a higher water flux of 59.2 mL cm^?2 min^?1 and a salt rejection ratio of 25.4%, while the polystyrene-block-polyisoprene-block-polystyrene/polyethylene-block-poly(ethylene glycol)-block-polycaprolactone membrane without poly(methyl methacrylate)-coated gold nanoparticles had lower flux (43.8 mL cm^?2 min^?1) and salt rejection (18.5%).     

Block copolymers with liquid crystalline segments

This paper describes the synthesis and characterization of polystyrene-block-poly(2,2'-dimethyl-4,4'-biphenylene phenylterephthalate)-block-polystyrene and of poly(ethylene glycol)-black-poly(2,2'-dimethyl-4,4'-biphenylene phenylterephthalate)-block-poly (ethylene glycol) block copolymers. The ABA-triblock copolymers were synthesized by condensation reaction of telechelic poly(2,2'-dimethyl-4,4'-biphenylene phenylterephthalate) with ω-hydroxy polystyrene and ω-hydroxy poly(ethylene glycol) methyl ether of different molecular weights prepared by anionic polymerization. Some aspects of the liquid crystalline behavior and the phase transitions with respect to the block copolymer composition will be discussed.     

Factors influencing aggregation behavior of poly(<Emphasis Type="Italic">γ</Emphasis>-benzyl <Emphasis Type="SmallCaps">l</Emphasis>-glutamate)-<Emphasis Type="Italic">graft</Emphasis>-poly(ethylene glycol) copolymer in mixed solvents

Poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) (PBLG-graft-PEG) copolymer was synthesized by the ester exchange reaction of PBLG homopolymer with mPEG. Aggregation behavior of the PBLG-graft-PEG copolymer in mixtures of ethanol and chloroform was investigated by transmission electron microscopy (TEM), dynamic light scattering (DLS), and viscometry. Effects of the polymer solution concentration, grafting degree, test temperature, and chloroform content on the morphology, average particle diameter, and critical micelle concentration (CMC) of the micelles formed by the PBLG-graft-PEG copolymer in the mixed solvents were mainly studied. It was revealed that the PBLG-graft-PEG copolymer can self-assemble into polymeric micelles with a core-shell structure in various shapes depending on the preparation conditions.     

Novel synthesis of biodegradable poly(lactide-co-ethylene glycol) block copolymers

Biodegradable and amphiphilic diblock copolymers [polylactide-block-poly(ethylene glycol)] and triblock copolymers [polylactide-block-poly(ethylene glycol)-block-polylactide] were synthesized by the anionic ring-opening polymerization of lactides in the presence of poly(ethylene glycol) methyl ether or poly(ethylene glycol) and potassium hexamethyldisilazide as a catalyst. The polymerization in toluene at room temperature was very fast, yielding copolymers of controlled molecular weights and tailored molecular architectures. The chemical structure of the copolymers was investigated with ¹H and ¹³C NMR. The formation of block copolymers was confirmed by ¹³C NMR and differential scanning calorimetry investigations. The monomodal profile of the molecular weight distribution by gel permeation chromatography provided further evidence of block copolymer formation as well as the absence of cyclic species. Additional confirmation of the block copolymers was obtained by the substitution of 2-butanol for poly(ethylene glycol); butyl groups were clearly identified by ¹H NMR as polymer chain end groups. The effects of the copolymer composition and lactide stereochemistry on the copolymer properties were examined. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2235–2245, 2007     

Degradation Behavior of the Hydrogel Poly(vinyl alcohol)-graft-Poly[(rac-lactide)-co-Glycolide)] under Different Conditions

Summary: The hydrogel poly(vinyl alcohol)-graft-poly[(rac-lactide)-co-glycolide)] [PVA-g-P(LGA)], containing nine ester groups in the polyester grafts (lactide:glycolide ratio 50:50) grafted onto PVA to an extent of 13%, and crosslinked via terminal acrylate groups was subjected to degradation experiments in phosphate buffer solution (pH 7.4) at room temperature and at 37 °C during 8 weeks. In the course of degradation, the properties of the hydrogel change as a result of the decrease of the polyester content. The increased temperature has a significant influence on the degradation rate but its amount varies with the methods applied. Thus, a large drop of the elastic modulus takes place in samples degraded at 37 °C with time and relative to RT. Thermal and IR analysis show changes while the initial difference between two sets of samples in contact angle is reduced with time.     

Fabrication of Gene Carrier via Self-assembly of Poly[(dimethylamino)ethyl Methacrylate] and Poly(aspartic acid)-grafted-Poly(ethylene glycol)

A biocompatible complex has been prepared as gene carrier via electrostatic interaction, which is composed of a polycation, that is, poly[(dimethylamino)ethyl methacrylate] end-capped with cholesterol moiety (Chol-PDMAEMA₃₀), along with a polyanion named poly(aspartic acid)-grafted-poly(ethylene glycol) (PASP-g-PEG). The complexes have less cytotoxicity compared to the case of alone Chol-PDMAEMA₃₀ or branched polyethylenimine (PEI) system.

In the present study, biocompatible complexes have been prepared as gene carrier via electrostatic interaction, which is composed of a polycation, that is, poly[(dimethylamino)ethyl methacrylate] end-capped with cholesterol moiety (Chol-PDMAEMA₃₀), along with a polyanion named poly(aspartic acid)-grafted-poly(ethylene glycol) (PASP-g-PEG). We first synthesized polysuccinimide (PSI) via condensation polymerization of aspartic acid, and then used PEG-NH₂ to react with the partial pentacyclic rings of PSI to yield a kind of graft copolymer polysuccinimide-grafted-poly(ethylene glycol) (PSI-g-PEG). After hydrolysis of the residual succinimide units, a new biodegradable and biocompatible graft copolymer PASP-g-PEG was prepared successfully. Chol-PDMAEMA₃₀ was synthesized via oxyanion-initiated polymerization, as reported in our previous literature. We investigated the interactions between every pair among calf thymus DNA, Chol-PDMAEMA₃₀, and PASP-g-PEG by agarose gel retardation assay. The results indicate that the prepared complexes could completely bind DNA and may become more stable during systemic circulation. The complexes have less cytotoxicity compared to the case of alone Chol-PDMAEMA₃₀ or branched polyethylenimine (PEI) system. Furthermore, the physicochemical properties of the complexes were also investigated by zeta potential, transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements. These biodegradable and biocompatible polymeric carriers have potential applications in gene delivery.     

Study on Self-assembly of Poly(ethylene glycol)- block-poly(γ-benzyl L -glutamate)-graft-poly(ethylene glycol) Copolymer and Poly(γ-benzyl L -glutamate)- block-poly(ethylene glycol) Copolymer in Ethanol

Poly(ethylene glycol)-block-poly(γ-benzyl L-glutamate)-graft-poly(ethylene glycol) (PEG-b-PBLG-g-PEG) copolymer was synthesized by the ester exchange reaction of poly(γ-benzyl L-glutamate)-block-poly(ethylene glycol) (PBLG-block-PEG) copolymer with PEG chain, and PBLG-block-PEG copolymer was prepared by a standard N-carboxyl-γ-benzyl-L-glutamate anhydride (NCA) method. Nuclear magnetic resonance (NMR) spectroscopy was used to confirm the components of PBLG-block-PEG and PEG-b-PBLG-g-PEG. The self-association behaviors of PBLG-block-PEG and PEG-b-PBLG-g-PEG in ethanol were investigated by transmission electron microscopy (TEM), dynamic laser scattering (DLS), and viscometry. The experimental results revealed that the different molecular structures could exert marked effects on the self-assembly behaviors of PBLG-block-PEG and PEG-b-PBLG-g-PEG in ethanol. PBLG-block-PEG and PEG-b-PBLG-g-PEG could self-assemble to form polymeric micelles with a core-shell structure in the shapes of plump spherical and regular rice-like, respectively. Effects of the introduction of PBLG homopolymer on the average particle diameter of the micelles of PBLG-block-PEG and PEG-b-PBLG-g-PEG and influence of testing temperature on the critical micelle concentration of different copolymers were studied.     

Study on polymeric micelles of poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) copolymer and its mixtures with poly(γ-benzyl l-glutamate) homopolymer in ethanol

Poly(γ-benzyl l-glutamate)-graft-poly(ethylene glycol) (PBLG-graft-PEG) copolymer was synthesized by the ester exchange reaction of the PBLG homopolymer with PEG. NMR spectroscopy was used to confirm the composition of the PBLG-graft-PEG copolymer. FTIR spectroscopy was used to characterize the chain conformation of polypeptide segments in the PBLG-graft-PEG copolymer in solid state. The self-assembly behavior of PBLG-graft-PEG and its mixtures with PBLG in ethanol were investigated by transmission electron microscopy (TEM) and viscometry. Experimental results showed that the PBLG-graft-PEG copolymer can self-assemble to form polymeric micelles with a core-shell structure of a thin shuttle-like shape. The introduction of the PBLG homopolymer into the mixed system not only decreases the critical micelle concentration (CMC) but also changes the morphology of the micelles from their shuttle-like shape to cylindrical shape. The effects of test temperature on the critical micelle concentration of PBLG-graft-PEG were also studied.     

Homogeneous and multiphase poly(methyl methacrylate) graft polymers via the macromonomer method

Anionic and group transfer polymerization processes were used to synthesize controlled molecular weight methacryloyloxy functionalized poly(dimethylsiloxane) and poly(methyl methacrylate) macromonomers having a narrow molecular weight distribution and high percent functionality. These macromonomers were anionically copolymerized with methyl methacrylate (MMA) to afford poly(methyl methacrylate)-graft-poly(methyl methacrylate) (PMMA-g-PMMA) and poly(methyl methacrylate)-graft-poly(dimethylsiloxane) (PMMA-g-PDMS) polymers having not only narrow molecular weight distribution graft parts but also backbone parts. The PMMA-g-PDMS system was fractionated using supercritical chlorodifluoromethane to determine its chemical composition distribution (CCD). The CCD for the PMMA-g-PDMS copolymerized in a living manner was substantially more narrow than the free radically copolymerized material. The PMMA-g-PMMA system was used to study the dilute solution properties of branched homopolymers. The appropriateness of the universal calibration gel permeation chromatography (GPC) method for branched systems exhibiting long chain branching was reaffirmed.     

Aggregation Behavior of Poly(ethylene glycol)-block-poly (γ-benzyl L-glutamate)-graft-poly(ethylene glycol) Copolymer and its Blends with Poly(γ-benzyl L-glutamate) Homopolymer in Mixed Solvents

Poly(ethylene glycol)-block-poly(γ-benzyl L-glutamate)-graft-poly(ethylene glycol) (PEG-b-PBLG-g-PEG) copolymer was synthesized by the ester exchange reaction of PBLG-block-PEG copolymer with mPEG. The self-association behaviors of PEG-b-PBLG-g-PEG and its blends with PBLG homopolymer in the mixtures of ethanol and dimethylformamide (DMF) were investigated by transmission electron microscopy (TEM), dynamic light scattering (DLS), and viscometry. Effects of the introduction of PBLG homopolymer, the grafting ratio, and the DMF content on the self-association behaviors of PEG-b-PBLG-g-PEG copolymer in the mixtures of ethanol and DMF were mainly researched. It was revealed that PEG-b-PBLG-g-PEG copolymer could self-assemble to form polymeric micelles with a core-shell structure in various shapes from different preparation conditions. The critical micelle concentration (CMC) and the average particle diameter of the micelles formed by PEG-b-PBLG-g-PEG copolymer in the mixed solvents also changed with different preparation conditions.     

Modification of poly(vinyl alcohol) membrane via blending with poly(<Emphasis Type="Italic">γ</Emphasis>-benzyl <Emphasis Type="SmallCaps">l</Emphasis>-glutamate)-<Emphasis Type="Italic">block</Emphasis>-poly(ethylene glycol) copolymer

A series of poly(vinyl alcohol) (PVA)/poly(γ-benzyl l-glutamate)-block-poly(ethylene glycol) (PBLG-b-PEG) blend membranes with different PVA/PBLG-b-PEG mole ratios were prepared by pervaporation. Structure and morphologies of PVA/PBLG-b-PEG blend membranes were investigated using Fourier transformation infrared spectroscopy (FTIR), and atomic force microscopy (AFM). Mechanical and chemical properties of PVA/PBLG-b-PEG blend membrane were studied by tensile testing and other physical methods. It was revealed that the introduction of PBLG-b-PEG copolymer has significant effect on the properties of a PVA membrane.     

Meticulous Doxorubicin Release from pH-Responsive Nanoparticles Entrapped within an Injectable Thermoresponsive Depot

The dual stimuli-controlled release of doxorubicin from gel-embedded nanoparticles is reported. Non-cytotoxic polymer nanoparticles are formed from poly(ethylene glycol)-b-poly(benzyl glutamate) that, uniquely, contain a central ester link. This connection renders the nanoparticles pH-responsive, enabling extensive doxorubicin release in acidic solutions (pH 6.5), but not in solutions of physiological pH (pH 7.4). Doxorubicin-loaded nanoparticles were found to be stable for at least 31 days and lethal against the three breast cancer cell lines tested. Furthermore, doxorubicin-loaded nanoparticles could be incorporated within a thermoresponsive poly(2-hydroxypropyl methacrylate) gel depot, which forms immediately upon injection of poly(2-hydroxypropyl methacrylate) in dimethyl sulfoxide solution into aqueous solution. The combination of the poly(2-hydroxypropyl methacrylate) gel and poly(ethylene glycol)-b-poly(benzyl glutamate) nanoparticles yields an injectable doxorubicin delivery system that facilities near-complete drug release when maintained at elevated temperatures (37 °C) in acidic solution (pH 6.5). In contrast, negligible payload release occurs when the material is stored at room temperature in non-acidic solution (pH 7.4). The system has great potential as a vehicle for the prolonged, site-specific release of chemotherapeutics.     

Miscible blends of poly(ethylene oxide) with brush copolymers of poly(vinyl alcohol)‐graft‐poly(l‐lactide)

Even though poly(ethylene oxide) (PEO) is immiscible with both poly(l ‐lactide) (PLLA) and poly(vinyl alcohol) (PVA), this article shows a working route to obtain miscible blends based on these polymers. The miscibility of these polymers has been analyzed using the solubility parameter approach to choose the proper ratios of the constituents of the blend. Then, PVA has been grafted with l ‐lactide (LLA) through ring‐opening polymerization to obtain a poly(vinyl alcohol)‐graft‐poly(l ‐lactide) (PVA‐g‐PLLA) brush copolymer with 82 mol % LLA according to ¹H and ¹³C NMR spectroscopies. PEO has been blended with the PVA‐g‐PLLA brush copolymer and the miscibility of the system has been analyzed by DSC, FTIR, OM, and SEM. The particular architecture of the blends results in DSC traces lacking clearly distinguishable glass transitions that have been explained considering self‐concentration effects (Lodge and McLeish) and the associated concentration fluctuations. Fortunately, the FTIR analysis is conclusive regarding the miscibility and the specific interactions in these systems. Melting point depression analysis suggests that interactions of intermediate strength and PLOM and SEM reveal homogeneous morphologies for the PEO/PVA‐g‐PLLA blends. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1217–1226     

Equilibrium study of polymer–polymer complexation of poly(methacrylic acid) and poly(acrylic acid) with complementary polymers through cooperative hydrogen bonding

The degree of linkage, θ, defined as the ratio of the binding groups to the total of potentially interacting groups and the stability constant K of the polymer–polymer complexes in the systems poly(methacrylic acid)–poly(ethylene glycol), poly(acrylic acid)–poly(ethylene glycol), and poly-(methacrylic acid)–poly(vinyl pyrrolidone) in aqueous and aqueous alcohol media were determined as a function of temperature by potentiometric titration. It was found that θ and K are strongly dependent on chain length, temperature, and medium and that hydrophobic interaction is a significant factor in the stabilization of the complexes. The enthalpy and entropy changes and the cooperativeness parameter of the systems were calculated. A mechanism for the complexation in terms of cooperative interaction was proposed.