Photocrosslinked poly(ester‐anhydride) microspheres with macroporous structure

In this work, the new method of preparation biodegradable microspheres with macroporous structure is presented. Typical methods used for generation of porous structures in microspheres obtained from preformed polymers require the use of additional substances acting as porogens. In this study, the porosity was achieved as the effect of photocrosslinking, without porogens. Microspheres were prepared using emulsion solvent evaporation technique from functional poly(ester‐anhydride)s with different amount of allyl groups in the side chains. The crosslinking was carried out by UV irradiation during the solvent evaporation (photoinitiator was introduced to polymer solution). The size of microspheres obtained was in the range of 1.7 – 4 µm (small microspheres) or 31 – 50 µm (large ones) and depended on the conditions used in emulsion formulation process. Effectiveness of the crosslinking was characterized by the content of insoluble part of samples, and it was in the range of 42–89%. The content of insoluble part of sample of microspheres and their porosity were dependent on functionality of poly(ester‐anhydride)s, the amount of photoinitiator used, and also on size of microparticles. The small particles were always more crosslinked than the large ones, but the latter were more porous than the small ones. Crosslinked microparticles indicated higher loading efficiency of model compound and appeared to degrade faster than uncrosslinked ones, probably due to their high porosity. The high porosity of microspheres obtained would enable their eventual use in pulmonary drug delivery systems or in construction of porous scaffolds for tissue engineering. Copyright © 2013 John Wiley & Sons, Ltd.     

交联壳聚糖水凝胶填充层状微胶囊的制备与性能

在甲基丙烯酸和乳酸接枝修饰的水溶性壳聚糖(CML)存在下, 合成了尺寸均匀的球形CML杂化碳酸钙微粒. 通过层层组装(LBL)技术在该微粒表面形成了聚苯乙烯磺酸钠(PSS)/聚烯丙基胺盐酸盐(PAH)多层膜, 去除碳酸钙微粒后得到内部含有CML的聚电解质微胶囊. 进一步采用紫外光引发CML聚合, 将CML转化为CML微凝胶, 得到内部填充凝胶的微胶囊. 通过扫描电镜、光学显微镜和透射电镜等技术表征了微胶囊的结构. 与传统的LBL微胶囊不同, 凝胶填充的微胶囊干燥时尺寸收缩, 但仍可保持球形; 再次水化后, 能够膨胀恢复其原有尺寸和形态. 各种具有不同电荷性质、分子量和亲疏水性的染料分子及蛋白质均可有效地装载到微胶囊内.     

Synthesis of Porous PEG Microgels Using CaCO3 Microspheres as Hard Templates

Porous poly(ethylene glycol) (PEG) microgels of both 17.6 and 8.3 μm in diameter are synthesized via hard templating with calcium carbonate (CaCO₃) microparticles. The synthesis is performed in three steps: loading of PEG macromonomers into CaCO₃ microparticles, crosslinking via photopolymerization, and removal of the CaCO₃ template under acidic conditions. The resulting porous PEG microgels are inverse replicates of their templates as indicated by light microscopy, cryo‐scanning electron microscopy (cryo‐SEM), and permeability studies. Thus this process allows for the straightforward and highly reproducible synthesis of porous hydrogel particles of two different diameters and porosities that show great potential as carriers for drugs or nanomaterials.     

On-chip classification of micro-particles using laser light scattering and machine learning

The rapid detection of microparticles exhibits a broad range of applications in the field of science and technology. The proposed method differentiates and identifies the 2 μm and 5 μm sized particles using a laser light scattering. The detection method is based on measuring forward light scattering from the particles and then classifying the acquired data using support vector machines. The device is composed of a microfluidic chip linked with photosensors and a laser device using optical fiber....     

Functionalization and Application of Cellulose Microparticles as Adsorbents in Extracorporeal Blood Purification

Therapeutic apheresis is established as supportive therapy for various diseases, such as hypercholesterolemia, autoimmune diseases, liver failure, and sepsis. In combined membrane-adsorption systems, the patient's plasma is continuously separated from whole blood by means of a hollow fiber filter, and pathogenic factors are removed from the plasma by selective or specific adsorbents. While adsorbent particles with a size range of 300–800 µm are used in conventional systems, we are currently developing a system based on adsorbent microparticles (1–5 µm), the Microspheres-Based Detoxification System (MDS). The characteristics of the matrix used for immobilization of specific ligands influence the performance of the resulting adsorbents. Desirable matrix characteristics are an open porous structure with an inner surface accessible for target molecules, mechanical stability, narrow particle size distribution, and ease of derivatization. In addition, biocompatibility is a critical issue, since the particles are in direct contact with the patient's plasma. Cellulose represents an ideal support matrix, as it combines all the above-mentioned features, and cellulosic polymers are widely applied in medicine and generally regarded as biocompatible. Cellulose microparticles can be activated using e.g. sodium periodate and functionalized with Polymyxin B or anti-tumor necrosis factor (TNF) antibodies to generate specific adsorbents for endotoxins or TNF. In summary, cellulose microparticles represent an excellent matrix as basis for adsorbent development in blood purification.     

Composites of poly (dimethylsiloxane) and spherically shaped poly (2‐hydroxyethylmethacrylate) particles for biomedical use

Silicone rubbers have shown considerable promise in the biomedical field, but their hydrophobicity leads to serious problems in long‐term implants. In our study, composites of poly (dimethylsiloxane) (PDMS) and spherically shaped poly (2‐hydroxyethylmethacrylate) (PHEMA) microparticles were prepared. Unlike previous silicone hydrogel composites, suspension polymerization was carried out in an aqueous medium to prepare PHEMA particles directly, which avoided the removal of organic phase and give hydrogel particles with high purity. Very fine PHEMA particles with uniform geometry and small size were obtained through various influencing factors during their formation. Through the introduction of PHEMA particles, PDMS matrix was endowed with hydrophilicity to a certain extent. With an increase in hydrogel content, higher swelling ability and surface wettability of the composites were observed. We have also demonstrated that smaller sized particles are more favorable for hydrophilicity improvement. The results of improved swelling ability, surface wettability, and low affinity to lipid show that this composite material is suitable for biomedical use. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis and characterization of new hydrogels through copolymerization of N-acryloyl-tris-(hydroxymethyl)aminomethane and different crosslinking agents

In this study, new hydrogels in rod shape were prepared from N-acryloyl-tris-(hydroxymethyl)aminomethane (NAT) using three different crosslinking agents: poly(2-methyl-2-oxazoline) bismacromonomer (BM), ethylene glycol dimethacrylate (EGDMA) and N,N′-methylenebisacrylamide (BIS). Dimethylformamide (DMF) was used as solvent and 2,2′-azobisisobutyronitrile (AIBN) as initiator. Polymeric matrices with different properties were obtained by free radical polymerization by changing the crosslinker (BM, EGDMA or BIS) or the concentration of BM. The hydrogel structures were characterized by high resolution magic angle spinning (HRMAS) NMR technique. Swelling experiments and rheological studies were used to test the water absorption capacity and viscoelastic properties of the hydrogels, respectively. For a given NAT/crosslinking agent molar ratio, the hydrogel synthesized with BM displays higher water absorptive capacity and larger range of linear viscoelasticity than those synthesized with BIS or EGDMA. The relatively larger hydrophilic character of the former and the lower crosslinking density generated by the longer molecules of BM might be the cause of this behavior. The results also reveal that water diffuses into the network following a non-Fickian mechanism. This is concluded from the value of the diffusion exponent n, which is higher than 0.50. The elastic modulus and the equilibrium water content (EWC) measurements suggest that these materials may have potential application as biomaterials.     

A Microfluidic Approach to Encapsulate Living Cells in Uniform Alginate Hydrogel Microparticles

A microfluidic technique is described to encapsulate living cells in alginate hydrogel microparticles generated from monodisperse double‐emulsion templates. A microcapillary device is used to fabricate double emulsion templates composed of an alginate drop surrounded by a mineral oil shell. Hydrogel formation begins when the alginate drop separates from the mineral oil shell and comes into contact with Ca²⁺ ions in the continuous phase. Alginate hydrogel microparticles with diameters ranging from 60 to 230 µm are obtained. 65% of the cells encapsulated in the alginate microparticles were viable after one week. The technique provides a useful means to encapsulate the living cells in monodisperse hydrogel microparticles.

     

Light‐Switchable Self‐Healing Hydrogel Based on Host–Guest Macro‐Crosslinking

A self‐healing hydrogel is prepared by crosslinking acrylamide with a host–guest macro‐crosslinker assembled from poly(β‐cyclodextrin) nanogel and azobenzeneacrylamide. The photoisomerizable azobenzene moiety can change its binding affinity with β‐cyclodextrin, therefore the crosslinking density and rheology property of the hydrogel can be tuned with light stimulus. The hydrogel can repair its wound autonomously through the dynamic host–guest interaction. In addition, the wounded hydrogel will lose its ability of self‐healing when exposed to ultraviolet light, and the self‐healing behavior can be recovered upon the irradiation of visible light. The utilizing of host–guest macro‐crosslinking approach manifests the as‐prepared hydrogel reversible and light‐switchable self‐healing property, which would broaden the potential applications of self‐healing polymers.

     

Precipitation of Micronized Piroxicam Particles via RESS

In this study, the rapid expansion of supercritical solutions process was used to micronize the intact particles of piroxicam. Experiments were carried out to investigate the effect of extraction pressure (160–220 bar), extraction temperature (308–333 K), spraying distance (1–10 cm), and nozzle configuration (length and effective diameter) on the size and morphology of the precipitated piroxicam particle. The characterization of the particles was determined by scanning electron microscopy (SEM). The particle size of the original piroxicam particles was (39.2 µm) while depending upon the different experimental conditions, smaller particles of piroxicam (1.52–8.78 µm) were obtained.     

Preparation and release profiles of pH/temperature-responsive carboxymethyl chitosan/P(2-(dimethylamino) ethyl methacrylate) semi-IPN amphoteric hydrogel

Thermo- and pH-responsive semi-IPN polyampholyte hydrogels were prepared by using carboxymethyl chitosan and P(2-(dimethylamino) ethyl methacrylate) with N N'-Methylenebisacrylamide (BIS) as crosslinking agent. It was found that the semi-IPN hydrogel shrunk most at the isoelectric point (IEP) and swelled when pH deviated from the IEP. Its swelling ratio dramatically decreased between 30 and 50 °C at pH 6.8 buffer solution. It also showed good reversibility. The UV results showed that when the pH values of drug release medium were 3.7, 6.8, and 9 at 25 °C, the cumulative release rates reached 83.1, 51.5, and 72.2%, respectively. The release rate of coenzyme A (CoA) was higher at 50 °C than 37 and 25 °C at pH 6.8 solution. The release rate decreased with increasing the content of carboxymethyl chitosan at 25 °C in pH 6.8 solution. The results showed that semi-IPN hydrogel seems to be of great promise in pH/temperature drug delivery systems.     

Crystallization behavior of soft, attractive microgels

The equilibrium phase behavior and the dynamics of colloidal assemblies composed of soft, spherical, colloidal particles with attractive pair potentials have been studied by digital video microscopy. The particles were synthesized by precipitation copolymerization of N-isopropylacrylamide (NIPAm), acrylic acid (AAc), and N,N'-methylene bis(acrylamide) (BIS), yielding highly water swollen hydrogel microparticles (microgels) with temperature- and pH-tunable swelling properties. It is observed that in a pH = 3.0 buffer with an ionic strength of 10 mM, assemblies of pNIPAm-AAc microgels crystallize due to a delicate balance between weak attractive and soft repulsive forces. The attractive interactions are further confirmed by measurements of the crystal melting temperatures. As the temperature of colloidal crystals is increased, the crystalline phase does not melt until the temperature is far above the lower critical solution temperature (LCST) of the microgels, in stark contrast to what is typically observed for phases formed due to purely repulsive interactions. The unusual thermal stability of pNIPAm-AAc colloidal crystals demonstrates an enthalpic origin of crystallization for these microgels.     

Tunable magnetophoretic method for distinguishing and separating wear debris particles in an Fe-PDMS-based microfluidic chip

Wear debris analysis provides an early warning of mechanical transmission system aging and wear fault diagnosis, which has been widely used in machine health monitoring. The ability to detect and distinguish the ferromagnetic and nonmagnetic debris in oil is becoming an effective way to assess the health status of machinery. In this work, an Fe-poly(dimethylsiloxane) (PDMS)-based magnetophoretic method for the continuous separation of ferromagnetic iron particles by diameter and the isolation of ferromagnetic particles and nonmagnetic particles with similar diameter by type is developed. The particles experience magnetophoretic effects when passing through the vicinity of the Fe-PDMS where the strongest gradient of the magnetic fields exists. By choosing a relatively short distance between the magnet and the sidewall of the horizontal main channel and the length of Fe-PDMS with controlled particles flow rate, the diameter-dependent separation of ferromagnetic iron particles, that is, smaller than 7 µm, in the range of 8–12 µm, and larger than 14 µm, and the isolation of ferromagnetic iron particles and nonmagnetic aluminum particles based on opposite magnetophoretic behaviors by types are demonstrated, providing a potential method for the detection of wear debris particles with a high sensitivity and resolution and the diagnostic of mechanical system.     

Antimicrobial silica particles loaded with quaternary ammonium polyethyleneimine network

Silica particles functionalized with quaternary ammonium groups were prepared by interpenetrating polyethylenimine (PEI) into silica particles and crosslinking with diiodopentane, followed by octyliodide alkylation and methyliodide quaternarization (S‐QA‐PEI). The synthesized S‐QA‐PEI particles were identified with a slight particle size increase of 2–3 µm. Different ratios of PEI:silica particles were prepared and analyzed. While silica particles are negatively charged, ?16.7 ± 5.11 mV, the prepared S‐QA‐PEI particles are positively charged, +50–60 mV. These particles were embedded in poly(ethylene vinyl acetate) and poly(ethylene methacrylic acid) coatings which exhibited strong antibacterial activity. Copyright © 2014 John Wiley & Sons, Ltd.     

States of water,surface and rheological characterisation of a new biohydrogel as articular cartilage substitute

PVA based hydrogel was synthesised using, as crosslinking agent, trisodium trimetaphosphate (STMP) and its morphology was modified inducing a microporous structure to obtain potential substitutes for cartilage tissue. The hydrogel was characterised by Infrared Spectroscopy combined with Time of flight mass spectrometry (ToF‐SIMS) that confirmed the successful occurrence of crosslinking reaction, the hyphotised crosslinking arm and its homogeneous distribution. The mechanical spectra of the fully hydrated samples confirmed covalently crosslinked systems with a rheological behaviour similar to that of tibial cartilage. Further analysis in terms of water content measurements, thermal stability and cytotoxicity confirmed the applicability of such a hydrogel as cartilage substitute. Copyright © 2013 John Wiley & Sons, Ltd.     

聚N-异丙基丙烯酰胺/纳米SiO_2复合水凝胶的合成及溶胀性能

通过纳米SiO2的表面功能化,在其表面引入乙烯基功能基团,在H2OTHF的混合溶剂中,超声分散后,交联剂N,N′亚甲基双丙烯酰胺存在时,于25℃下使其与N异丙基丙烯酰胺共聚,制得聚N异丙基丙烯酰胺纳米SiO2复合水凝胶,并用FTIR和SEM对产物进行了表征.研究了凝胶的溶胀动力学,消溶胀动力学和温度敏感性.实验结果表明,纳米SiO2的引入,改善了聚N异丙基丙烯酰胺水凝胶在低温时的溶胀性能和在高温时对水的释放性能,并讨论了引起这些性能改变的原因.     

Highly crosslinked micron-range polymer microspheres by dispersion polymerization of divinylbenzene

Narrow disperse microparticles are formed by dispersion polymerization of commercial divinylbenzene in acetonitrile or ethanol solution in the presence of 2,2′-azobis(2-methylpropionitrile) initiator and polyvinylpyrrolidone stabilizer. The particles have average diameters between 1 and 9 μm depending on monomer concentration, solvent, and temperature. While the smaller particles are relatively smooth, surface texture increases with diameter to give popcorn shapes at 9 μm diameter. High crosslinker concentration is shown to be essential for particle formation. © 1993 John Wiley & Sons, Inc.     

Magnetic-based purification system with simultaneous sample washing and concentration

Simultaneous washing and concentration of magnetic microparticles was demonstrated using a rotational magnetic system under a continuous-flow condition. The rotation of periodically arranged permanent magnets close to a fluidic channel carrying a suspension of magnetic particles allows the trapping and releasing of particles along the fluidic channel in a periodic manner. Each trapping and releasing event resembles one washing cycle in conventional biological assays. Concentration efficiencies of 99.75?±?0.083% at a flow rate of 200 µl/min and 88.10?±?3.17% at a flow rate of 1,000 µl/min and a purification efficiency of 99.10?±?4.3% at a flow rate of 900 µl/min were achieved.     

Preparation and evaluation of monodispersed,submicron, non‐porous silica particles functionalized with β‐CD derivatives for chiral‐pressurized capillary electrochromatography

Submicron, non‐porous, chiral silica stationary phase has been prepared by the immobilization of functionalized β‐CD derivatives to isocyanate‐modified silica via chemical reaction and applied to the pressurized capillary electrochromatography (pCEC) enantio‐separation of various chiral compounds. The submicron, non‐porous, cyclodextrin‐based chiral stationary phases (sub_μm‐CSP2) exhibited excellent chiral recognition of a wide range of analytes including clenbuterol hydrochloride, mexiletine hydrochloride, chlorpheniramine maleate, esmolol hydrochloride, and metoprolol tartrate. The synthesized submicron particles were regularly spherical and uniformly non‐porous with an average diameter of around 800 nm and a mean pore size of less than 2 nm. The synthesized chiral stationary phase was packed into 10 cm × 100 μm id capillary columns. The sub_μm‐CSP2 column used in the pCEC system showed better separation of the racemates and at a higher rate compared to those used in the capillary liquid chromatography mode (cLC) system. The sub_μm‐CSP2 possessed high mechanical strength, high stereoselectivity, and long lifespan, demonstrating rapid enantio‐separation and good resolution of samples. The column provided an efficiency of up to 170 000 plates/m for n‐propylbenzene.     

Viscoelasticity,mechanical properties,and in vivo biocompatibility of injectable polyvinyl alcohol/bioactive glass composite hydrogels as potential bone tissue scaffolds

Abstract

An injectable composite hydrogel composed of polyvinyl alcohol (PVA) and bioactive glass (BG) particles were synthesized by a physical crosslinking approach. The morphology, mechanical properties, and viscoelasticity of the PVA/BG composite hydrogel were characterized. Scanning electronic microscopy (SEM) showed uniform and homogeneous distribution of BG particles throughout the composite hydrogel. The incorporation of 2.5?wt% of BG particles in the composite hydrogel formulations, enhanced the static compressive strength and static elastic modulus by 325% and 150%, respectively. The storage molds (G′) was greater than the loss modules (G′′) at all the frequency range studied, which revealed a self-standing elastic composite hydrogel with a smooth injectability. The PVA/BG composite hydrogel was also implanted subcutaneously in the dorsal region of adult male rats. After 4?weeks of implantation, no inflammatory cells were seen within and around the implant, which indicated that the composite hydrogel was biocompatible. The properties of the synthesized injectable PVA/BG composite hydrogel demonstrate its capability toward bone regeneration.