SYNTHESIS,PROPERTIES AND AN ELECTROACTIVE FILM OF RUTHENIUM(II) COMPLEXES WITH THE PYRIDINE DERIVATIVE LIGAND: trans-[RuCl2(pmp)4].(pmp=3-(PYRROL-1-YLMETHYL)PYRIDINE)

Abstract

In this work we report the synthesis, characterization and electrochemistry of the complex trans-[RuCl₂(pmp)₄], where pmp=3-(pyrrol-l-ylmethyl)pyridine. The complex was characterize by electronic spectroscopy (Λ_max = 404 nm and ε = 27000), vibrational FT-IR spectroscopy, ¹H and ¹³C NMR, showing results typically in agreement with trans geometry. Cyclic voltammetry reveals a redox process centered on the Ru(II) center (E^1/2 = 0.53V vs. NHE), which is electrochemically and chemically reversible. Spectroelectrochemistry shows the progressive disappearance of bands at 404 and 475 nm and the appearance of a new band at 302 nm during the oxidation process. Cyclic voltammetric experiments were performed to characterize the redox properties of the ruthenium complex; its electropolymerization produced a strongly adhesive conducting polymeric film on platinum and palladium electrodes.     

Amperometric Determination of Ascorbic Acid at an Electrodeposited Redox Polymer Film Modified Gold Electrode

A sensitive and selective electrochemical method for the determination of ascorbic acid was developed. It was shown that a hydrated osmium complex‐containing redox polymer film can be electrodeposited at the gold electrode and it exhibits excellent electrocatalytic activity towards the oxidation of ascorbic acid. In contrast to a bare gold electrode, the oxidation current of ascorbic acid increased greatly and the oxidation peak potential shifted negatively to about 0.01 V (vs. SCE) at the modified electrode. Amperometric measurements were performed at an applied potential of 0.01 V and a linear response was obtained in the range of 2–400 μM with a limit of detection (LOD) of 0.6 μM (S/N=3). The interference studies showed that the modified electrode exhibits excellent selectivity in the presence of large excess of uric acid and dopamine. The proposed procedure was successfully applied to the determination of ascorbic acid in human urine samples.     

Stabilization role of a phenothiazine derivative on the electrocatalytic oxidation of hydrogen via Aquifex aeolicus hydrogenase at graphite membrane electrodes

The [NiFe] membrane-bound hydrogenase from the microaerophilic, hyperthermophilic Aquifex aeolicus bacterium (Aa Hase) presents oxygen, carbon monoxide, and temperature resistances. Since it oxidizes hydrogen with high turnover, this enzyme is thus of particular interest for biotechnological applications, such as biofuel cells. Efficient immobilization of the enzyme onto electrodes is however a mandatory step. To gain further insight into the parameters governing the interfacial electron process, cyclic voltammetry was performed combining the use of a phenothiazine dye with a membrane electrode design where the enzyme is entrapped in a thin layer. In the absence of the phenothiazine dye, direct electron transfer (DET) for H(2) oxidation is observed due to Aa Hase adsorbed onto the PG electrode. An unexpected loss of the catalytic current with time is however observed. The effect of toluidine blue O (TBO) on the catalytic process is first studied with TBO in solution. In addition to the expected mediated electron transfer process (MET), TBO is demonstrated to reconnect directly some Aa Hase molecules possibly released from the electrode but still entrapped in the thin layer. On adsorbed TBO the two same processes occur demonstrating the ability of the TBO film to connect Aa Hase via a DET process. Loss of activity is however observed due to the poor stability of adsorbed TBO at high temperatures. Aa Hase immobilization is then studied on electropolymerized TBO (pTBO). The effect of film thickness, temperature, presence of inhibitors and pH is evaluated. Given a film thickness less than 20 nm, H(2) oxidation proceeds via a mixed DET/MET process through the pTBO film. A high and very stable H(2) oxidation activity is reached, showing the potential applicability of the bioelectrode for biotechnologies. Finally, the multifunctional roles of TBO-based matrix are underlined, including redox mediator, Aa Hase anchor, but also buffering and ROS scavenger capabilities to drive pH local changes and avoid oxidative damage.     

Electrochemical oxidation of catechol at poly(indole-5-carboxylic acid) electrode

In this work we examined the electrochemical properties of poly(indole-5-carboxylic acid), PIn₅COOH. The polymer was produced by electrochemical polymerisation using cyclic voltammetry (CV). It was shown that PIn₅COOH is electroactive in aqueous solutions showing two redox processes in acidic solution and one redox process in solutions with pH > 4. The oxidation of catechol (CT) on Pt/In₅COOH modified electrodes was investigated by cyclic voltammetry (CV) and rotating disc electrode (RDE) voltammetry. It was established that CT was oxidised only after the oxidation of polymer film was initiated and that polymer significantly enhanced the oxidation and reduction peak currents in comparison with bare Pt electrode. The variation of peak currents (i _pa, i _pc) as a function of CT concentration was found to be linear up to 6 mM. Experiments with a rotating disk electrode show that the oxidation reaction of catechol occures not only at the polymer/electrolyte interface but also in the polymer film.     

Spectrophotometric determination of <Emphasis Type="Italic">L</Emphasis>-ascorbic acid in pharmaceuticals

A simple and sensitive spectrophotometric method for the determination of L-ascorbic acid with leuco crystal violet is proposed. The determination is based on the oxidation of analyte by potassium iodate. The colourless oxidation products were formed in the quantity equivalent to iodide ions. The iodide ions react with the excess of iodate ions in acidic medium, to form free iodine which oxidized leuco crystal violet (LCV) to the liberated crystal violet (CV ⁺) dye, showing maximum absorption at 588 nm. The absorbance was measured at pH of 4.1–4.2 in 1 cm cuvettes. Beer’s law was obeyed in the concentration range 0.5–4.0 μg/mL. The molar absorptivity of the coloured compound is 4.14 × 10⁴ L/mol cm for L-ascorbic acid. The analytical parameters were optimized and the method was successfully applied to the determination of L-ascorbic acid in pharmaceuticals. The results were compared with those obtained by methods proposed in Polish Standard.     

Surface characterization and direct electrochemistry of redox copper centers of bilirubin oxidase from fungi Myrothecium verrucaria

The key characteristics of multicopper oxidases are redox potentials of Type 1, Type 2 and Type 3 copper centers of enzymes. However, there is still a challenge to obtain a value of the redox "signature" of the enzymes. In this study, the electrochemical behavior of T1 and T2/T3 redox copper centers of bilirubin oxidase (BOD) from the fungi Myrothecium verrucaria was studied based on direct bioelectrocatalysis. Two distinct redox peaks corresponding to reduction and oxidation of T1 and T2/T3 redox centers of enzymes have been clearly detected in anaerobic conditions. The bioelectrocatalytic activity of the enzyme was studied in the presence of oxygen and redox mediators. The electron-transfer rate constant for BOD immobilized on carbon electrode (CE) is 1.5 s(-1). The mechanism of enzyme inactivation by ABTS has been proposed. The physical architecture of BOD layers immobilized on the electrode surface, including elemental and chemical composition, relative thickness and assembly of layers was investigated by Angle Resolved X-ray photoelectron spectroscopy. Unique peaks of BOD at 288.5 eV and of CE at 284.6 eV were used in a substrate over layer model for estimation of the thickness of the of BOD film on the carbon electrode surface.     

The determination of adrenaline on the porous gold film modified glassy carbon electrode

A simple method has been developed to prepare porous Au film-modified glassy carbon electrode (PAu/GCE). By using a simple electrodeposition process, a dense porous Au (PAu) film possessing good adhesion, large surface area, and mechanical integrity, was obtained. The surface characterization studies confirm that the formation of porous film constituted of Au nanoparticles. It was found, from the CV studies, that the prepared PAu modified electrode shows excellent catalytic activity for the electro-oxidation of adrenaline (AD) in a neutral medium. As to the electrochemical response of redox of adrenaline/adrenalinequinone couple in 0.1 M pH 7.0 phosphoate buffer solution (PBS), at the PAu/GCE, the anodic peak potential E _pa shifted by 50 mV negatively in the negative direction, compared to that on the Au film modified glassy carbon electrode (Au/GCE), indicating the extraordinary activity of PAu in electrocatalysis for the oxidation process of AD. The application of the modified electrode for the determination of AD in pharmaceutical preparations indicates that the PAu/GCE has good sensitivity and reproducibility.     

Preparation of neutrally colorless,transparent polynorbornenes with multiple redox‐active chromophores via ring‐opening metathesis polymerization toward electrochromic applications

A new electrochromic norbornene derivative containing triphenylamine groups (NBDTPAC8) was synthesized using norbornene amine and bromotriphenylamine. NBDTPAC8 was used in ring‐opening metathesis polymerization to obtain poly(NBDTPAC8) using different Grubbs' catalysts and followed by hydrogen reduction to obtain poly(HNBDTPAC8). The glass transition temperatures (T_g) of poly(NBDTPAC8) and hydrogenated poly(HNBDTPAC8) were 132 and 89 °C, respectively. Poly(HNBDTPAC8) film exhibited a fluorescence maximum around 416 nm with a quantum yield of up to 60%. Hydrogenated poly(HNBDTPAC8) film showed excellent transparency (up to 93%). Poly(HNBDTPAC8) showed cyclic voltammetric and electrochromic behaviors similar to those of poly(NBDTPAC8). The cyclic voltammogram of a poly(HNBDTPAC8) film cast onto an indium tin oxide (ITO)‐coated glass substrate exhibited three reversible oxidation redox couples at 0.69, 0.94 and 1.38 V versus Ag/Ag⁺ in an acetonitrile solution. The electrochromic characteristics of poly(HNBDTPAC8) showed excellent stability and reversibility, with multi‐staged color changes from its colorless neutral form to green, light blue and dark blue upon the application of potentials ranging from 0 to 1.60 V. The color switching time and bleaching time of the poly(HNBDTPAC8) film were 6.2 s and 4.3 s at 1175 nm and 6.6 s and 4.4 s at 970 nm, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Glucose sensing by electrogenerated chemiluminescence of glucose-dehydrogenase produced NADH on electrodeposited redox hydrogel

In this work, we report a new sensing approach based on electrogenerated chemiluminescence (ECL) in an electrodeposited redox hydrogel using glucose dehydrogenase as a model system. The ECL-hydrogel films were electrodeposited by potential cycling of a PBS solution containing [poly(4-vinylpyridine)Ru(2,2'-bipyridine)(2)Cl(-)](+/2+). The film was easily prepared in a rapid, reproducible and well-controlled one-step procedure. The deposited hydrogel film is permeable to water-soluble chemicals and biochemicals, like enzyme substrates and coenzymes. Electrochemistry and ECL of NADH were studied at the level of the hydrogel film. Results indicate that ECL emission occurs at a relatively low anodic potential compared to the classical Ru(bipy)(3)(2+) complex. This is an important advantage since the measurements performed with the ECL hydrogel are thus less sensitive to interfering species. An ECL oxidative-reductive mechanism is presented for the ECL-hydrogel. Then we showed that the intensity of the ECL of NADH produced by the enzymatic activity varies with the enzyme substrate concentration. Such sensing approach combines enzymatic selectivity with the ECL advantages at low oxidation potential.     

Synthesis,Characterization and Electrochemical Polymerization of a Ru2+ Functionalized Pyrrole Monomer

A ruthenium(II) functionalized pyrrole, Ruthenium‐bis‐N,N′‐(2,2′‐bipyridyl)‐N‐(pyridine‐4‐ylmethyl‐(8‐pyrrole‐1‐yl‐octyl)amine)chloride, 1 , has been synthesized and characterized by spectroscopic (UV/vis, ¹H NMR) techniques and cyclic voltammetry. In solution 1 gave a redox couple associated with the Ru^3+/2+ redox system and an irreversible wave associated with the oxidation of the covalently linked pyrrole moiety. What is believed to be homopolymerization, redox active surface films of 1 have been prepared by electrooxidation of the monomeric solution. The resulting polymeric film exhibited clear redox activity associated with the incorporated Ru²⁺ redox centre, which is covalently linked ruthenium centre to the pyrrole moiety in 1. The effect of surface coverage upon the electrochemical behavior of the deposited films has been undertaken. Preliminary investigations into the homogeneous charge transport dynamics of the polymeric film deposited onto platinum microelectrodes has been undertaken. Copolymerization with 3‐methylthiophene was carried out and a clear ruthenium response was seen. Films were formed by both cyclic voltammetry and chronocoulometry and studied. Various ratios were attempted but the ideal was found to be 52 : 5 mmol (3‐methylthiophene: 1 ).     

Electrochemical Polymerization of 3,4‐Ethylenedioxythiophene from Aqueous Solution Containing Hydroxypropyl‐β‐cyclodextrin and the Electrocatalytic Behavior of Modified Electrode Towards Oxidation of Sulfur Oxoanions and Nitrite

Poly(3,4‐ethylenedioxythiophene) (PEDOT) film was prepared on glassy carbon electrode from 0.1 M LiClO₄ aqueous solution containing 3,4‐ethylenedioxythiophene (EDOT) monomer and hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD), by multiple scan cyclic voltammetry. The effect of oxidation potentials on electropolymerization of EDOT was examined by chronoamperometry and cyclic voltammetric techniques. The results of potentiostatic experiments show that optimum potential range to obtain compact stable film was 0.9 to 1.05 V (vs. Ag/AgCl). At higher positive potential, i.e. above 1.05 V, polymer growth was hindered by passivation effect. The PEDOT film exhibited a strong absorption at 550 nm in the UV‐vis region and also a multicolor electrochromism in different buffer solutions (sky blue‐purple red). Cyclic voltammetric features of PEDOT‐coated electrode in pure supporting electrolyte suggested that charge transfer of the film resembles that of surface‐confined redox species. Finally, the electrocatalytic behavior of PEDOT‐modified electrode was tested towards oxidation of sulfur oxoanions and nitrite using cyclic voltammetry.     

Controlling the charge of pH-responsive redox hydrogels by means of redox-silent biocatalytic processes. A biocatalytic off/on switch

Coupling of redox-silent biocatalytic processes for analyte detection with enzyme-catalyzed redox reactions for signal generation is proposed by the modulation of electrostatic interactions between a pH-responsive polymer and a redox enzyme to control the off–on transition for electrochemical signal generation. Glassy carbon electrodes are modified with a poly(vinyl)imidazole Os(bipyridine)₂Cl redox hydrogel film entrapping urease and PQQ-dependent glucose dehydrogenase, while glucose is present in the solution. The off–on transition is based on the detection of urea as model analyte which is hydrolyzed to ammonia by urease within the hydrogel film concomitantly increasing the local pH value thus invoking deprotonation of the imidazole groups at the polymer backbone. The decrease of positive charges at the polymer decreases electrostatic repulsion between the polymer and the positively charged PQQ-dependent glucose dehydrogenase. Hence, electron transfer rates between polymer-bound Os complexes and PQQ inside the enzyme are enhanced activating electrocatalytic oxidation of glucose. This process generates the electrochemical signal for urea detection.     

Enzymatic formation of ions and their detection at a three-phase electrode

An electrochemical method for the detection of enzymatically created anions is described that uses a thin-film electrode with decamethylferrocene as an electroactive redox probe. The enzymatic oxidation of glucose with enzyme glucose oxidase produces gluconic acid as a final product. The oxidation of decamethylferrocene dissolved in the thin-nitrobenzene film, that is spread on the working graphite electrode and submerged in the aqueous solution containing glucose and glucose oxidase, is followed by the up-take of gluconate anions from the aqueous phase to nitrobenzene. The peak currents of the square-wave voltammetric responses of that system are a linear function of the glucose concentration in the milimolar range from 0.1 mmol/L to 0.7 mmol/L (R²=0.994).     

Synthesis and characterization of novel nano size electroactive poly 4,4′‐diaminodiphenyl sulphone

The modification of electrodeposited polyaniline film by subsequent electrodeposition of 4,4′‐diaminodiphenyl sulfone (DDS) leads to a new material having nanostructure. The coated polymer films were treated with various pH solutions. The film adherent characteristics and surface morphology were studied using SEM. The electrochemically synthesized polyDDS revealed good redox behavior. The DDS was also polymerized by the chemical oxidation method using potassium persulphate. The polymer was characterized by UV‐Vis and FTIR spectral studies. The formation of polymer through the N? H group was understood from the single N? H stretching vibrational frequency at 3459 cm^?1. The X‐ray diffraction studies revealed the formation of nano sized (28 nm) crystalline polymer. The conductivity of the polymer was determined to be 1.07 × 10^?4 S.cm^?1. The solubility of the chemically polymerized powder was ascertained, and polyDDS showed good solubility in DMF and DMSO. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1702–1707, 2005     

The influence of composition and structure of water-in-oil microemulsions on activities of Iraqi Turnip peroxidase

The activity of the enzyme Iraqi Turnip peroxidase (ITP) is studied in a reverse microemulsion composed of chloroform, aqueous buffer, sodium dodecylsulfate (SDS) and alcohols of the homologous series 1-propanol to 1-hexanol through the measurements of absorbancy of the product of oxidation at the wavelength of 470 nm in the course of reactions. The ITP catalyzed reaction is the oxidation of guaiacol by hydrogen peroxide. Maximum enzyme activity was obtained at ω₀ (molar ratio of water to surfactant) = 8. It was found that the oxidation reaction obeyed Michaelis–Menten kinetics in the investigated concentration rang (0.08–0.8 mM) of the substrate, and the Michaelis constant K_m and maximal reaction rate V_m were determined. The enzyme inhibition caused by the alcohols in microemulsions is a consequence of both the solubility of the alcohols in the buffer and the flexibility of the interfacial film.     

Voltammetry of a Benzoquinone–Hydroquinone Redox Couple at Electrodes Modified with a Polyvinylpyridine Film Doped with Cobalt Phthalocyanine

The electrochemical properties of a glassy-carbon electrode coated with a polyvinylpyridine film doped with incorporated cobalt phthalocyanine were studied in a reaction involving a benzoquinone–hydroquinone redox couple. It was found that poly-(2-vinylpyridine) film applied to the electrode and cobalt phthalocyanine deposited onto it or incorporated in the polymeric film exhibited electrocatalytic activity on the oxidation of hydroquinone. Conditions were selected for obtaining a polyvinylpyridine film doped with cobalt phthalocyanine on the electrode surface providing a maximum catalytic effect. The current of the hydroquinone oxidation peak and the current of the reverse benzoquinone reduction peak at the chemically modified electrode were linear functions of their concentrations in the range from 1 × 10^–6 to 1 × 10^–3 M.     

Direct electrosynthesis and characterization of a new soluble polyfluorene derivative containing carboxyl group in boron trifluoride diethyl etherate

High-quality poly(fluorene-9-acetic acid) (PFAA), a new soluble polyfluorene derivative, was synthesized electrochemically by direct anodic oxidation of fluorene-9-acetic acid (FAA) in boron trifluoride diethyl etherate (BFEE) containing a certain amount of trifluoroacetic acid (TFA). This electrolyte enables facile anodic oxidation of FAA monomer at lower potential (1.05 V vs. SCE). PFAA films with conductivity of 0.53 S cm⁻¹ obtained from this medium showed better redox activity and thermal stability in relation to unsoluble poly(fluorene-9-carboxylic acid). Fluorescent spectral studies indicate that PFAA film with high fluorescence quantum yields and photochemical stability is a good blue-light emitter. The structure and morphology of the polymer were studied by UV–vis, FT-IR, ¹H NMR spectra and scanning electron microscopy, respectively.     

Fabrication of Glucose Biosensor Based on Encapsulation of Glucose‐Oxidase on Sol‐Gel Composite at the Surface of Glassy Carbon Electrode Modified with Carbon Nanotubes and Celestine Blue

A simple procedure was developed to prepare a glassy carbon electrode modified with multi walled carbon nanotubes (MWCNTs) and Celestin blue. Cyclic voltammograms of the modified electrode show stable and a well defined redox couple with surface confined characteristic at wide pH range (2–12). The formal potential of redox couple (E′) shifts linearly toward the negative direction with increasing solution pH. The surface coverage of Celestine blue immobilized on CNTs glassy carbon electrode was approximately 1.95×10^?10 mol cm^?2. The charge transfer coefficient (α) and heterogeneous electron transfer rate constants (k_s) for GC/MWCNTs/Celestine blue were 0.43 and 1.26 s^?1, respectively. The modified electrode show strong catalytic effect for reduction of hydrogen peroxide and oxygen at reduced overpotential. The glucose biosensor was fabricated by covering a thin film of sol‐gel composite containing glucose oxides (GOx) on the surface of Celestine blue /MWCNTs modified GC electrode. The biosensor can be used successfully for selective detection of glucose based on the decreasing of cathodic peak current of oxygen. The detection limit, sensitivity and liner calibration rang were 0.3 μM, 18.3 μA/mM and 10 μM–6.0 mM, respectively. The accuracy of the biosensor for glucose detection was evaluated by detection of glucose in a serum sample, using standard addition protocol. In addition biosensor can reach 90% of steady currents in about 3.0 sec and interference effect of the electroactive existing species (ascorbic acid–uric acid and acetaminophen) was eliminated. Furthermore, the apparent Michaelis–Menten constant 2.4 mM, of GOx on the nano composite exhibits excellent bioelectrocatalytic activity of immobilized enzyme toward glucose oxidation. Excellent electrochemical reversibility of redox couple, high stability, technically simple and possibility of preparation at short period of time are of great advantages of this procedure for modification of glucose biosensor.     

Facile synthesis of PtSnZn nanosheet thin film at oil–water interface by use of organometallic complexes: An efficient catalyst for methanol oxidation and p‐nitrophenol reduction reactions

PtSnZn nanosheet thin film with stable and high activity towards methanol electro‐oxidation was synthesized via a simple reduction of organometallic precursors including [PtCl₂(cod)] (cod = cis,cis‐1,5‐cyclooctadiene) and [Sn(CH₃)₄] complexes, in the presence of [Zn(acac)₂] (acac = acetylacetonate) complex at toluene–water interface. Catalytic activities of PtSnZn nanosheets were investigated in the p‐nitrophenol (p‐Nip) reduction and methanol oxidation reactions. The obtained results demonstrate that PtSnZn nanosheets exhibit a good electrocatalytic performance for methanol oxidation reaction, the catalytic activity of the PtSnZn nanosheets being at least 3.5 times higher than that of Pt nanoparticle thin film. Also, the apparent rate constant obtained for p‐Nip reduction with the PtSnZn nanosheets is at least 2.3 times higher than that for Pt nanoparticle thin film due to the appropriate interaction between platinum, tin and zinc metals and geometric properties of PtSnZn nanosheet thin film. Nanosheets are highly favourable for superior catalytic performances due to their geometric properties. A facile and efficient route was used to synthesize trimetallic alloy thin film at oil–water interface.