Phase diagram and dissolution studies of the fenofibrate–acetylsalicylic acid system

Enhancement of the dissolution rate of poorly soluble compounds through the formation of drug–drug eutectics was investigated using fenofibrate and acetylsalicylic acid. Solid–liquid equilibria in the system under study were investigated by differential scanning calorimetry (DSC). The phase diagram for the whole range of compositions was constructed. In addition, existence of a metastable polymorph of fenofibrate has been confirmed. The investigation has revealed that acetylsalicylic acid and fenofibrate form a simple eutectic mixture containing 0.958 mol fraction of fenofibrate at the eutectic point. Dissolution rate improvement of fenofibrate correlated with the phase diagram. The amount of fenofibrate released from the solid dispersions that contained fenofibrate as the eutectic mixture with acetylsalicylic acid was at least threefold higher compared to untreated fenofibrate.     

FT-IR studies of molecular interactions in formamide–methanol mixtures

FT-IR spectra of formamide (FA)–methanol (MeOH) mixtures have been measured by ATR technique. Factor analysis applied to the spectra has shown two kinds of intermolecular complexes differing in a manner of polarization of component molecules. The composition of the complexes changes monotonically with the composition of the mixtures. The spectra in the CO stretching region have been analyzed separately using both: the factor analysis and the difference spectra method. Four different environments of carbonyl group of formamide has been revealed over the whole range of the mixture composition. The mean number of formamide molecules disturbed by one methanol molecule via carbonyl group in the formamide-rich region has been found as equal to 1.5. Presumable structures for the molecular complexes have been proposed to explain the results of the analyses.     

Phase Diagrams of Fullerenol-d–LaCl3–H2O and Fullerenol-d–GdCl3–H2O Systems at 25°С

Russian Journal of Physical Chemistry A - Isothermal phase diagrams of ternary systems fullerenol-d–LaCl3–H2O and fullerenol-d–GdCl3–H2O at 25°C are studied via...     

Phase diagram and crystal chemistry of the La–Ca–Co–O system

The phase diagram of the La–Ca–Co–O system at 885 °C in air has been determined. The system consists of two materials that have interesting thermoelectric properties, namely, the misfit layered thermoelectric oxide solid solution, (Ca,La)₃Co₄O₉, and Ca₃Co₂O₆ which consists of 1D chains of alternating CoO₆ trigonal prism and CoO₆ octahedra. The reported La₂CaO₄ and the Ca-doped (La,Ca)₂CoO_4−z phases were not found at 885 °C. As a result of the absence of these phases, the phase diagram is significantly different from that reported at 1100 °C. Small solid solution regions of (La_1−xCa_x)₂O_3−z (0 ≤ x ≤ 0.08), (Ca_1−xLa_x)₃Co₄O₉ (0 ≤ x ≤ 0.07), and (La_1−xCa_x)CoO_3−z (0 ≤ x ≤ 0.2) were established.     

Phase diagram study of CaBr2–CaHBr system

A study of binary, CaBr₂–CaHBr system was carried out by differential thermal analysis (DTA), covering the composition range from 100 % CaBr₂ to 100 % CaHBr between room temperature and 800 °C. From DTA results, the contour of solidus and liquidus temperatures with composition is plotted and the phase diagram of CaBr₂–CaHBr system is constructed. The system shows an eutectic reaction at 576 °C and the eutectic composition is 79.6 mol% CaBr₂. Co-existing phases in different phase fields are characterized by X-ray diffraction analysis.     

Infrared,Raman and XPS spectroscopic studies of Bi2O3–B2O3–Ga2O3 glasses

Glasses with compositions 60Bi₂O₃–(40?x)B₂O₃–xGa₂O₃ (x = 5, 10, 15, 20 mol%) are prepared by conventional melting method. The thermal properties are investigated by differential thermal analysis (DTA) and the structures of the glasses were probed by Infrared, Raman and X-ray photoelectron spectroscopy (XPS). The results show that density, refractive index and optical basicity increase with the increase of Ga₂O₃. The glass transition temperature (T_g), the onset crystallization temperature (T_x), ΔT (T_x?T_g) decrease with the content of Ga₂O₃. The cut-off edges in ultraviolet and infrared shift to longer wavelength with the increase of Ga₂O₃. On the other hand, the addition of Ga₂O₃ causes a progressive coordination number change of the boron atom from 3 to 4. XPS result indicates both Bi⁵⁺ and Bi³⁺ exist in 5 mol% Ga₂O₃ content, while Bi⁵⁺ amounts decrease with the increase of Ga₂O₃ contents. The glass is mainly composed of [BiO₆], [BO₃], [BO₄] and [GaO₄] polyhedra. Glasses are supposed to have layer structure. [BO₃] triangle and [BO₄] tetrahedra may be located between the [GaO₄] tetrahedral and [BiO₆] octahedra to prevent crystallization and to compensate electric charge.     

Phase diagram and electrical conductivity of the CeBr3–CsBr binary system

Journal of Thermal Analysis and Calorimetry - Phase equilibrium in the CeBr3–CsBr binary system was established from differential scanning calorimetry (DSC). This system includes three...     

Infrared,Raman and XPS spectroscopic studies of Bi2O3–B2O3–GeO2 glasses

Glasses with composition 50Bi₂O₃–(50 ? x) B₂O₃–xGeO₂ (x = 0, 5, 10, 15 mol%) were prepared by conventional melting method. The thermal properties were investigated by differential thermal analysis (DTA) and the structures of the glasses were probed by Infrared, Raman and X-ray photoelectron spectroscopy (XPS). The results show that density, refractive index and optical basicity increase with the increase of GeO₂. The glass transition temperature (T_g), onset crystallization temperature (T_x) and ΔT (T_x ? T_g) increase as well. The cut-off edges in ultraviolet and infrared shift to longer wavelength by the addition of GeO₂. Infrared, Raman and XPS results indicate that the glass network consists of [Bi–O₆] octahedron, [BO₃] triangle, [BO₄] tetrahedron and [GeO₄] tetrahedron and borate oxide mainly exists in [BO₃] units. XPS result indicates Ge⁴⁺ ions form steady [GeO₄] tetrahedra units in the glass network and the number of non-bridging oxygens decreases with the addition of GeO₂.     

Thermodynamic studies of mixtures for topical anesthesia: Lidocaine–salol binary phase diagram

The lidocaine–salol binary system has been investigated by differential scanning calorimetry, direct visual observations, and X-ray powder diffraction, resulting in a temperature-composition phase diagram with a eutectic equilibrium. The eutectic mixture, found at 0.423 ± 0.007 lidocaine mole-fraction, melts at 18.2 ± 0.5 °C with an enthalpy of 17.3 ± 0.5 kJ mol^?1. This indicates that the liquid phase around the eutectic composition is stable at room temperature. Moreover, the undercooled liquid mixture does not easily crystallize. The present binary mixture exhibits eutectic behavior similar to the prilocaine–lidocaine mixture in the widely used EMLA^® topical anesthetic preparation.     

Phase diagram of the Sn–P system

Journal of Thermal Analysis and Calorimetry - The T–x diagram of the Sn–P system was studied by differential thermal analysis, X-ray phase analysis and local X-ray spectral...     

Phase diagram study of CaBr2–LiBr system using DTA

The phase diagram of binary LiBr–CaBr₂ system was investigated using differential thermal analysis (DTA) between room temperature and 800 °C. From the DTA results obtained over the entire range of composition from pure LiBr to pure CaBr₂ in steps of ~5 mol%, the phase diagram was constructed and is reported here. The results indicated the possible existence of a compound at 50 mol% LiBr, namely, LiCaBr₃. The compound undergoes peritectic decomposition at 552 °C. The system shows a eutectic reaction at 532 °C between this compound and LiBr phase, and the eutectic composition is close to 80 mol% LiBr. The compound LiCaBr₃ decomposes into CaBr₂ and LiBr phases below 272 °C. Co-existing phases in different phase fields are characterized by X-ray diffraction analysis.     

Phase diagram of ZnAs2–MnAs system

1. Download high-res image (77KB)
2. Download full-size image

     

Mullitization behavior and microstructural development of B2O3–Al2O3–SiO2 mixtures activated by high-energy ball milling

This paper reports on phase formation and microstructural development of mullite, derived from B₂O₃–Al₂O₃–SiO₂ mixtures activated with different milling methods. It is found that the addition of B₂O₃ has a positive effect on mullite phase formation from the mixture of Al₂O₃–SiO₂, which can be qualitatively attributed to the fact that B₂O₃ brought out higher nucleation density and enhanced reaction kinetics. Anisotropic grain growth of mullite was not observed in the unmilled mixture since mullite phase formation occurred after densification. Dense and interlocking microstructures of mullite ceramics were produced from the mixture activated with stainless steel milling media, whereas mullite whiskers were formed in the samples milled with tungsten carbide media. The high-energy ball milling refined the precursors and thus reduced the mullitization temperature. As a result, anisotropic microstructures and mullite whiskers could be derived from the milled mixtures. This way to produce anisotropic microstructures of mullite ceramics is very simple and requires temperatures much lower than those reported in the literature. This method is believed to be useful to fabricate reinforced mullite or mullite-related materials via in-situ anisotropic grain growth.     

Thermal and volumetric properties of methanol–hexamethylphosphortriamide mixtures under standard conditions

Enthalpic and volumetric characteristics of mixing in a methanol (MeOH)–hexamethylphosphortriamide (HMPT, 2) mixture are studied. Based on an analysis of concentration changes in the obtained data and the calculated partial molar characteristics, it is shown that at 0.2 molar fractions > х ₂ > 0.7 molar fractions, the variation in the composition of the mixture slightly alters the character of intermolecular interactions characteristic of pure components. It is found that MeOH–HMPT mixtures experience most changes in intermolecular interaction and structure within the range of 0.2–0.7 molar fractions of HMPT.

     

Comparative studies in subsolidus areas of ternary oxide systems PbO–V2O5–In2O3 and PbO–V2O5–Fe2O3

Thermal stability of PbO was studied. Reactivity of oxides in the systems PbO–M₂O₃ (M = In, Fe) was investigated up to 650 °C. Using the DTA and XRD methods, parts of investigated ternary oxide systems, labelled by compounds: V₂O₅, Pb₈V₂O₁₃ and M₂O₃ (M = In, Fe), have been divided into partial ternary systems. IR spectra of compounds Pb₂MV₃O₁₁ (M = In, Fe) have been compared.     

Thermoanalytical and dilatometric studies of the Al2O3–Cu–Mo hybrid composite

Journal of Thermal Analysis and Calorimetry - The present research is focused on the characterization of the composites from Al2O3–Cu–Mo system. The composites were prepared by slip...     

Fourier transform infrared studies of 5′-GMP in 2H2O and H2O solutions.

In a previous work (ref. 1) we observed important changes in the 1700–1400 cm⁻¹ region of FTIR spectra in ²H₂O solutions when 5′-GMP concentration increases. These changes can be attributed to the self-association of this mononucleotide. Recently, study of this process has been extended to other regions of the spectrum and to H₂O solution. Fourier deconvolution has been employed in order to resolve the broad band into component bands. Differences have been observed between spectra in H₂O and ²H₂O for the same solute concentration. The possible causes of these differences are indicated.     

Effects of CuCl2��6H2O and ZnCl2��6H2O on the viscosity of aqueous ethanol mixtures

The effects of CuCl₂ and ZnCl₂ on the viscosity in aqueous ethanol mixtures (10%–50% v/v) were studied in the concentration range 1.0×10⁻²–8.0×10⁻² mol·dm⁻³ at different temperatures. It was found that the viscosities increased with an increase in the concentration of the salts and percent composition of ethanol content, whereas it decreased with an increase in temperature. Ion-ion and ion-solvent interactions are determined with the help of A- and B-coefficients of Jones-Dole equation. The values of A- and B-coefficients are irregular and increase with a rise in temperature and also with an increase in ethanol contents for both salts. Negative values of B-coefficients show that ion solvent interactions is comparatively small and suggest that CuCl₂ and ZnCl₂ behave as structure breakers in aqueous ethanol mixtures. Thermodynamic parameters like the energy of activation (E _η ) and change in entropy of activation (ΔS*) were also evaluated which confirm the structure breaker behavior of salts in aqueous ethanol mixtures.     

Phase diagram of the Pr–Mn–O system in composition–temperature–oxygen pressure coordinates

The phase relations in the Pr–Mn–O system were studied by the static method at lowered oxygen pressure in combination with thermal analysis and high-temperature X-ray diffraction. The equilibrium oxygen pressure in dissociation of PrMn₂O₅ and PrMnO₃ was measured, and the thermodynamic characteristics of formation of these compounds from elements were calculated. The Р–Т–х phase diagram of the Pr–Mn–O system was constructed in the “composition–oxygen pressure–temperature” coordinates.