Cadmium,lead, copper and manganese determination in human deciduous teeth by electrothermal atomic absorption spectrometry using a lanthanum,palladium and citric acid mixture as chemical modifier

Cadmium, lead, copper and manganese were determined in human deciduous teeth and bone ash 1400 standard reference material by electrothermal atomic absorption spectrometry (ETAAS), using a lanthanum + palladium + citric acid (CA) modifier mixture. Optimum masses and mass ratios of La, La + Pd and La + Pd + CA modifiers for analytes in bone ash 1400 sample solution were investigated. Pyrolysis and atomization temperatures of analytes in a tooth sample solution were obtained with and without modifiers. The mixture of La + Pd + CA was found to be preferable for the determination of analytes in tooth samples and bone ash 1400, dissolved in a mixture of HNO₃ + H₂O₂. The detection limits and characteristic masses of analytes were obtained with or without modifiers based on integrated absorbance for tooth sample solution (2% m/v). The detection limits obtained with La + Pd + CA are 6,24,16 and 46 ng g^?1 for Cd, Cu, Mn and Pb, respectively. Recovery tests for analytes in bone ash 1400 and a tooth solution with La and La + Pd + CA modifier mixture were studied and compared with certified and non certified values. The La + Pd + CA mixture was also applied to the determination of Cd, Pb, Cu and Mn in tooth samples.     

Determination of cadmium, copper and lead in soils, sediments and sea water samples by ETAAS using a Sc + Pd + NH(4)NO(3) chemical modifier

Cadmium, copper and lead in soils, sediments and spiked sea water samples have been determined by electrothermal atomic absorption spectrometry (ETAAS) with Zeeman effect background corrector using NH₄NO₃, Sc, Pd, Sc + NH₄NO₃, Pd + NH₄NO₃, Sc + Pd and Sc + Pd + NH₄NO₃ as chemical modifiers. A comprehensive comparison was made among the modifiers and without modifier in terms of pyrolysis and atomization temperatures, atomization and background absorption profiles, characteristic masses, detection limits and accuracy of the determinations. Sc + Pd + NH₄NO₃ modifier mixture was found to be preferable for the determination of analytes in soil and sediment certified and standard reference materials, and sea water samples because it increased the pyrolysis temperature up to 900 °C for Cd, 1350 °C for Cu and 1300 °C for Pb. Optimum masses of mixed modifier components found are 20 μg Sc + 4 μg Pd + 8 μg NH₄NO₃. Characteristic masses of Cd, Cu and Pb obtained are 0.6, 5.3 and 15.8 pg, respectively. The detection limits of Cd, Cu and Pb were found to be 0.08, 0.57 and 0.83 μg l⁻¹, respectively. Depending on the solid sample type, the percent recoveries were increased up to 103% for Cd, Cu and Pb by using the proposed modifier mixture. The accuracy of the determination of analytes in the sea water samples was also increased.     

Kinetic study of atomization in atomic absorption analysis of solid samples using flame-furnace atomizer

Direct solid sampling analysis in atomic absorption spectrometry using flame-furnace atomizer allows to significantly decrease analysis duration, to avoid sample pollution and to exclude toxic reagents. The choice of chemical modifiers that decreases the detection limit and improves the repeatability of results is based on the mechanism of analyte-free atom formation. The kinetic approach developed here allows determination of pre-exponential factors k₀ and apparent activation energies E_a of the atomization processes for Pb(II) and Cd(II) compounds and enables use of CaCO₃ and KHF₂ as effective chemical modifiers for soil samples. A fast and precise technique for lead and cadmium determination in soils using the proposed chemical modifiers was developed.     

Performance of electrodeposited noble metals as permanent modifiers for the determination of cadmium in the presence of mineral acids by electrothermal atomic absorption spectrometry

The analytical performance of electrodeposited noble metals (Pd, Rh or Pd+Rh) on the graphite surface for cadmium determination in the presence of inorganic acids was evaluated and discussed. The study was carried out for 16% HNO₃, 28% HCl and a mixture of both acids (aqua regia). It was demonstrated that all electrodeposited modifiers stabilized cadmium up to 800°C in the presence of HNO₃ and aqua regia. When only HCl was present in the solution the thermal stability of cadmium was less pronounced, the maximum pyrolysis temperature that could be applied was 500°C. The long-term study for Cd determination shows that permanent performance of electrodeposited modifiers is not influenced by mineral acids, moreover, the tube lifetime was doubled, compared with a non-modified tube, when Pd+Rh were electrodeposited onto the graphite surface.     

An investigation of different modifiers in electrothermal vaporization inductively coupled plasma mass spectrometry (ETV-ICP-MS)

The suitability of eleven modifiers (Pd-, Mg-, K-, Ca- and NH₄-salts) for electrothermal vaporization coupled to inductively coupled plasma mass spectrometry (ETV-ICP-MS) for the determination of Mn, Cu, Zn, Cd and Pb has been studied. Solutions containing varying quantities (10–2000 ng absolute) of these salts have been added to four different amounts of analyte to study their suitability as modifier and their mass dependent influence. The best sensitivity enhancement for all elements tested was achieved with IrCl₃ and PdCl₂. From a comparison of the effect of PdCl₂ vs. Pd(NO₃)₂ it could be concluded that the mechanism of matrix modification also depends on the chemical form of the modifier. Particularly, for the volatile elements Cd and Zn differences in the behavior of the different chemical compounds of one metal (e.g. Pd) is evident, which shows that the enhancement effect is a result of the stabilization of the analytes in the graphite tube prior to vaporization and the improvement of the transport efficiency after vaporization.     

Determination of cadmium and lead in biological samples by Zeeman ETAAS using various chemical modifiers

The electrothermal atomic absorption spectrometric determination of cadmium and lead in biological certified reference materials (CRMs) has been carried out by using NH(4)H(2)PO(4), Ni, Pd, Ni+NH(4)H(2)PO(4), Pd+NH(4)H(2)PO(4) and Ni+Pd+NH(4)H(2)PO(4) as chemical modifiers. A comprehensive comparison was made among the modifiers in 1% Triton X-100 plus 0.2% nitric acid as diluent and without modifier. Zeeman background correction and graphite tubes inserted with platforms were used. Comparison was made in terms of pyrolysis and atomization temperatures, atomization and background absorption profiles. Ni+Pd+NH(4)H(2)PO(4) modifier mixture was found to be preferable for the determination of Cd and Pb. Pyrolysis temperatures of analytes were increased up to 900 degrees C for Cd and 1250 degrees C for Pb by using Ni+Pd+NH(4)H(2)PO(4) in 1% Triton X-100 plus 0.2% nitric acid diluent solution. Biological CRMs were analyzed to verify the accuracy and precision of this method. Depending on the biological sample type, the percent recoveries were increased from 62 to 102% for Cd and from 58 to 106% for Pb by using the proposed modifier mixture. The detection limits of Cd and Pb were found to be 0.04, 0.92 mug l(-1), respectively.     

Simultaneous determination of cadmium and lead in wine by electrothermal atomic absorption spectrometry

A method has been developed for the direct simultaneous determination of Cd and Pb in white and red wine by electrothermal atomic absorption spectrometry (ET-AAS) using a transversely heated graphite tube atomizer (THGA) with longitudinal Zeeman-effect background correction. The thermal behavior of both analytes during pyrolysis and atomization stages were investigated in 0.028 mol l⁻¹ HNO₃ and in 1+1 v/v diluted wine using mixtures of Pd(NO₃)₂+Mg(NO₃)₂ and NH₄H₂PO₄+Mg(NO₃)₂ as chemical modifiers. With 5 μg Pd+3 μg Mg as the modifiers and a two-step pyrolysis (10 s at 400°C and 10 s at 600°C), the formation of carbonaceous residues inside the atomizer was avoided. For 20 μl of sample (wine+0.056 mol l⁻¹ HNO₃, 1+1, v/v) dispensed into the graphite tube, analytical curves in the 0.10–1.0 μg l⁻¹ Cd and 5.0–50 μg l⁻¹ Pb ranges were established. The characteristic mass was approximately 0.6 pg for Cd and 33 pg for Pb, and the lifetime of the tube was approximately 400 firings. The limits of detection (LOD) based on integrated absorbance (0.03 μg l⁻¹ for Cd, 0.8 μg l⁻¹ for Pb) exceeded the requirements of Brazilian Food Regulations (decree #55871 from Health Department), which establish the maximum permissible level for Cd at 200 μg l⁻¹ and for Pb at 500 μg l⁻¹. The relative standard deviations (n=12) were typically <8% for Cd and <6% for Pb. The recoveries of Cd and Pb added to wine samples varied from 88 to 107% and 93 to 103%, respectively. The accuracy of the direct determination of Cd and Pb was checked for 10 table wines by comparing the results with those obtained for digested wine using single-element ET-AAS, which were in agreement at the 95% confidence level.     

Determination of cadmium in hair and blood by tungsten coil electrothermal atomic absorption spectrometry with chemical modifiers

Three chemical modifiers ((NH(4))(2)HPO(4), NH(4)H(2)PO(4), and Pd as Pd(NO(3))(2)) were evaluated for the determination of Cd in acid-digested solutions of hair and blood using electrothermal atomic absorption spectrometry in a tungsten coil atomizer (TCA). All modifiers caused some thermal stabilization of Cd when compared to the behavior observed in nitric acid medium. The best effects were observed in 15 mug ml(-)(1) Pd medium; the characteristic mass of Cd was 0.3 pg and the method detection limits were 0.009 mug g(-)(1) in hair and 0.2 mug l(-)(1) in blood. In addition to a slight thermal stabilization effect, Pd also increased the sensitivity for Cd by ca. 40% and the tungsten coil lifetime by 20% (i.e. from 300 to 360 heating cycles), reduced background signals, and eliminated condensed phase interferences caused by concomitants. The accuracy (3.2% as mean relative error in the Pd modifier) was checked for the determination of Cd in acid-digested solutions of certified reference materials of human hair and blood and by recoveries of Cd in spiked hair and blood samples by both TCA and a graphite furnace procedure. All results obtained in chemical modifiers are in agreement at a 95% confidence level.     

Anreicherung und spektrochemische Bestimmung von Spurenelementen in reinsten Thalliumpr?paraten

Zusammenfassung Zur Anreicherung von Spurenelementen aus Lösungen reinster Thalliumpräparate wird die Matrix Thallium als TlJ ausgefällt. Dabei bleiben die Spuren Mg, Zn, Al, Ga, In, Fe, Co, Ni, Mn, Sn, La, Ce, Th und U quantitativ in Lösung, während Bi, Cu, Pb und Cd sowie die Edelmetalle Ag, Hg, Pd, Au und Pt vom Niederschlag mitgerissen werden. Die Adsorption der für die Reinheitsprüfung des Thalliums wichtigen Elemente Bi, Cu, Pb und Cd kann verhindert werden, wenn sie mit Hilfe von ÄDTA in Komplexanionen übergeführt werden. Als Fällungsmittel wird NaJ verwendet. Zur spektrochemischen Bestimmung werden Pb, Cd, Bi, Ni, Co und In als DDTC-Komplexe mit Chloroform extrahiert. Nach Zusatz einer Mischung von Lithiumcarbonat-Kohle und den Referenzelementen Sn und Pd wird der Eindampfrückstand im Gleichstrombogen analysiert. Cu und Fe werden photometrisch bestimmt.

---

Enrichment and spectrochemical determination of trace elements in high-purity thallium preparations

For the enrichment of trace elements in solutions of high-purity thallium samples, thallium is precipitated in form of TlI. In this process the noble metals Ag, Hg, Pd, Au, Pt and also Bi, Cu, Pb and Cd will be co-precipitated, whereas many other elements (Mg, Zn, Al, Ga, In, Fe, Co, Ni, Mn, Sn, La, Ce, Th, U) will remain completely in solution. The adsorption of the four elements Bi, Cu, Pb, Cd, which are important for the purity control of thallium compounds, can be prevented, if they are complexed with EDTA to form complex anions. The precipitating reagent is NaI. For the spectrochemical determination of Pb, Cd, Bi, Ni, Co, and In, the trace elements are extracted as DDTC complexes with chloroform. After the addition of a mixture of Li₂CO₃, carbon, and the reference elements Sn and Pd, the sample is analysed, using the d.c. arc. Cu and Fe are determined spectrophotometrically.

---

---

Wir danken dem Fonds der chemischen Industrie für die finanzielle Unterstützung dieser Arbeit.     

Study of chemical modifiers for the determination of chromium in biological materials by tungsten coil electrothermal atomic absorption spectrometry

The determination of Cr in digest solutions of mussels and non-fat milk powder by tungsten coil electrothermal atomic absorption spectrophotometry (TC-ETAAS) is affected by interferences. This study reports a critical evaluation of chemical modifiers that could be employed to correct these interferences. The chemical modifiers tested were: Mg [as Mg(NO₃)₂], Pd [as Pd(NO₃)₂], NH₄NO₃, ascorbic acid, and mixtures of these compounds. The less effective modifier was NH₄NO₃. The best effects, considering thermal stabilization and sensitivity, were obtained in mixtures of ascorbic acid plus Mg. Chromium was determined by TC-ETAAS in certified reference materials of mussels and non-fat milk powder, and results were comparable with those obtained by graphite furnace atomic absorption spectrophotometry (GFAAS).     

A new method for simultaneous determination of Co(II), Ni(II) and Pd(II) as morpholine-4-carbodithioate complex by SPME-HPLC-UV system

A new approach for the analysis of Co(II), Ni(II) and Pd(II) as morpholine-4-carbodithioate (MDTC) complexes in aqueous medium by using solid phase microextraction (SPME)-high performance liquid chromatography (HPLC)-UV has been developed. The method involves sorption of metal complexes on PDMS fiber from aqueous solution followed by desorption in the desorption chamber of SPME-HPLC interface using acetonitrile:water (60:40) as mobile phase. A good separation of metal complexes is achieved on C₁₈ column. The detection limits of Co(II), Ni(II) and Pd(II) are 0.17, 0.11 and 0.06 ng ml⁻¹, respectively. These can be determined by the proposed method without interference from other common metal ions such as Mo(VI), V(V), Ag(I), Sn(IV), Cd(II), Pb(II), Zn(II), Ag(I), Sn(II), Cr(III) and Cr(VI). The method was applied to the determination of these metals in different alloy samples and drinking water sample.     

Study of chemical modifiers for the determination of chromium in biological materials by tungsten coil electrothermal atomic absorption spectrometry

The determination of Cr in digest solutions of mussels and non-fat milk powder by tungsten coil electrothermal atomic absorption spectrophotometry (TC-ETAAS) is affected by interferences. This study reports a critical evaluation of chemical modifiers that could be employed to correct these interferences. The chemical modifiers tested were: Mg [as Mg(NO₃)₂], Pd [as Pd(NO₃)₂], NH₄NO₃, ascorbic acid, and mixtures of these compounds. The less effective modifier was NH₄NO₃. The best effects, considering thermal stabilization and sensitivity, were obtained in mixtures of ascorbic acid plus Mg. Chromium was determined by TC-ETAAS in certified reference materials of mussels and non-fat milk powder, and results were comparable with those obtained by graphite furnace atomic absorption spectrophotometry (GFAAS). Received: 19 June 1998 / Revised: 11 January 1999 / Accepted: 16 January 1999     

A solid solution theory for matrix modification in electrothermal atomic absorption spectrometry

The kinetics of evaporation of the volatile analytes Pb and Cd in the presence of Ce(IV) introduced as the chemical modifier (NH₄)₂Ce(NO₃)₆ have been studied. The experimental results obtained are found to be in acceptable agreement with the regular solution model applied as a theoretical approach. Comparison with the results from previous investigation on the Pb/W analyte-modifier couple is made. An attempt is also made to explain some effects connected with the application of modifiers as described in the literature within the framework of the present model.     

Application of rapid electrothermal atomic absorption spectrometric methods to the determination of Ag, Al, Cd and Mn in cocaine and heroin samples

 Rapid methods were developed for the direct determination of Ag, Al, Cd and Mn in cocaine and heroin by ETAAS using programmes omitting the charring step . Sample pretreatment was simple: dissolution in ultrapure water or in 35.0% (v/v) HNO₃ for heroin or cocaine, respectively. Optimum drying temperatures were 250 °C for Ag, Al and Mn, and 300 °C for Cd. The run cycles were 35 and 37 s, for Ag and Al respectively, and 36 s for Cd and Mn. The best results were obtained with Pd, Mg(NO₃)₂ and (NH₄)₂HPO₄, as chemical modifiers. The limits of detection were 8.6, 55.9, 2.2 and 12.4 μg kg^-1 for Ag, Al, Cd and Mn, respectively. Received: 14 November 1996/Revised: 14 January 1997/Accepted: 18 January 1997     

Determination of cadmium by electrothermal atomic absorption spectrometry after microwave-assisted digestion of animal tissues and sewage sludges

The determination of cadmium in different sample types has been carried out by electrothermal atomization atomic absorption spectrometry with D₂-background correction using a unpyrocoated graphite tube, after pressurized microwave-assisted digestion. Five chemical modifiers [(NH₄)₂HPO₄, Pd(NO)₃)₂, Ni(NO₃)₂, thiourea and Triton X-100] have been assayed and nickel nitrate has been found to be most effective for an accurate determination of cadmium in mussel tissue, pig kidney and sewage sludge. The characteristic mass of the method is of the order of 1 pg and the limit of detection is lower than 0.1 ng/ml.     

Determination of tin in environmental samples by graphite furnace atomic absorption and inductively coupled plasma-mass spectrometry

Summary Methods for the determination of total Sn in environmental samples (waters, animal tissue, plant material, sediments and coal fly ash), by graphite furnace atomic absorption spectrometry (GFAAS) and inductively coupled plasma mass spectrometry (ICP-MS) have been developed and evaluated.Noble metals (Ag, Au, Pd, Pt, Rh) under reducing conditions were studied as matrix modifiers for the determination of Sn by GFAAS. The maximum ashing temperature (1400°C), highest sensitivity and the best absolute detection limit (4 pg) were achieved when Pd was used in the presence of hydroxylamine hydrochloride. The achievable sensitivity depended strongly on the chemical composition of the matrix.Both GFAAS and ICP-MS appeared to be equally sensitive techniques for the direct determination of Sn in waters, though ICP-MS was a more convenient and sensitive technique for the determination of Sn in digested biological and geological materials.

---

Bestimmung von Zinn in Umweltproben durch Graphitrohr-AAS und ICP-MS

     

APDC沉淀分离富集石墨炉原子吸收测定海水和生物样品中铅,镉,钴,铜,锡,砷和钼

我们曾研究一种新的分离富集方法,即在酸性水溶液中加入吡咯烷二硫代甲酸铵(APDC)沉淀镍后,将Ni-PDC溶于甲基异丁酮(MIBK)中,有机相直接进样石墨炉原子吸收测定尿和生物样品中痕量镍.本工作将此方法扩大应用于海水和生物样品中铅、镉、钴、铜、锡、砷和钼     

Effect of some metallic additives (Ag, Cd, and Sn) on thermal transport properties of a-Se

In this study, we have studied the effect of elements Ag, Cd, and Sn as chemical modifiers on some thermal transport properties (thermal conductivity, diffusivity, and specific heat per unit volume) of amorphous Se. Concurrent measurements of thermal transport properties such as effective thermal conductivity (??_e), thermal diffusivity (??_e), and specific heat per unit volume (??C _v) are used at room temperature for twin pellets of pure Se- and Se-based binary Se₉₈M₂ (M?=?Ag, Cd, and Sn) alloys using transient plane source technique. We have also determined the thermal inertia I _T using the experimental values of thermal conductivity and specific heat per unit volume for present amorphous alloys. The increasing sequence of measured thermal transport properties is also discussed.     

Evaluation of tungsten–rhodium coating on an integrated platform as a permanent chemical modifier for cadmium,lead, and selenium determination by electrothermal atomic absorption spectrometry

A tungsten–rhodium coating on the integrated platform of a transversely heated graphite atomizer is proposed as a permanent chemical modifier for the determination of Cd, Pb, and Se by electrothermal atomic absorption spectrometry. It was demonstrated that coating with 250 μg W+200 μg Rh is as efficient as the conventional Mg(NO₃)₂+NH₄H₂PO₄ or Pd+Mg(NO₃)₂ modifiers for avoiding most serious interferences. The permanent W–Rh modifier remains stable for 300–350 firings of the furnace, and increases tube lifetime by 50%–100% when compared to pyrolytic carbon integrated platforms. Also, there is less degradation of sensitivity during the atomizer lifetime when compared with the conventional modifiers, resulting in a decreased need of re-calibration during routine analysis. The characteristic masses and detection limits achieved using the permanent modifier were respectively: Cd 1.1±0.4 pg and 0.020 μgL⁻¹; Pb 30±3 pg and 0.58 μgL⁻¹ and Se 42±5 pg and 0.64μgL⁻¹. Results from the determination of these elements in water reference materials were in agreement with the certified values, since no statistical differences were found by the paired t-test at the 95% level.     

Study of Some Tungsten-Containing Chemical Modifiers in Graphite-Furnace Atomic Absorption Spectrometry

Abstract

Several chemical modifiers based on tungsten have been evaluated: the individual modifiers W(VI) as WO₃ in aq. 0.2 M NH₃ and W(V) as W in H₂O₂ and the mixed modifiers W(VI)/NH₃ + Pd(II), W(V)/H₂O₂ + Pd(II), and W(V)/H₂O₂ + PO₄ ^3-. High efficiency of thermal stabilization for 18 analyte elements of high and moderate volatility has been demonstrated and possible mechanisms of stabilization are discussed.