Excess molar enthalpies of triethylamine + ethylbenzene, + n-propylbenzene, + n-butylbenzene, + isopropylbenzene,and + isobutylbenzene at 303.15 K

Excess molar enthalpies H_m^E of triethylamine + ethylbenzene, + n-propylbenzene, + n-butylbenzene, + isopropylbenzene, and + isobutylbenzene were measured over the entire composition range at 303.15 K with an LKB flow microcalorimeter. H_m^E values are positive and decrease with increasing chain length of the alkylbenzene.     

Calorimetric effects of short-range orientational order in solutions of benzene or n-alkylbenzenes in n-alkanes

A Picker flow microcalorimeter was used to determine molar excess heat capacities, C^E_p, at 298.15 K, as function of concentration, for the eleven liquid mixtures: benzene+n-tetradecane; toluene+n-heptane, and +n-tetradecane; ethylbenzene+n-heptane, +n-decane, +n-dodecane; and +n-tetradecane; n-propylbenzene +n-heptane, and +n-tetradecane; n-butylbenzene+n-heptane, and +n-tetradecane. In addition, molar excess volumes, V^E, at 298.15 K, were obtained for each of these systems (except benzene+n-tetradecane) and for toluene+n-hexane. The excess volumes which are generally negative with a short alkane, increase and become positive with increasing chain length of the alkane. The excess heat capacities are negative in all cases. The absolute ¦C^E_p¦ increased with increasing chain length of the n-alkane. A formal interchange parameter, C_p12, is calculated and its dependence on n-alkane chain length is discussed in terms of molecular orientations.     

Adsorption of tetralin and hydrogenated intermediates and products on the (100) surfaces of Ir, Pt and Pd: a DFT study

The current work presents systematic density functional theory (DFT) study on the adsorption characteristics of H, C, CH₃, C₂H₄, C₆H₆, C₆H₁₀, tetralin, tetralin’s plausible monohydrogenated intermediates and the hydrogenated products (1-butylbenzene, 1-methyl, 2-propylbenzene, and 1,2-diethylbenzene) involved in the selective ring opening (SRO) of tetralin on the (100) surfaces of Ir, Pt and Pd. We found that the most stable product of SRO of tetralin on the 3 metal surfaces was 1-butylbenzene. Generally, the adsorptions on 3 metal surfaces have the similar tendency, and most of the species bind most favorably to Ir compared to Pt and Pd. From our thermodynamic analysis, the overall reaction energetic for the three possible ring opening pathways are exothermic, with 1,2-diethylbenzene and 1-methyl, 2-propylbenzene being more energetically favorable compared to 1-butylbenzene.     

Resonant laser mass spectrometry: fragmentation patterns from 13C1 naturally labeled molecules

The potential of resonance-enhanced multiphoton ionization (REMPI) mass spectrometry to pick out the fragmentation pattern due to ¹³C₁-isotopomers from the fragmentation pattern due to the unlabeled molecule, in non-isotope-enriched samples, has been explored. Toluene, n-propylbenzene, ortho-diethylbenzene, and tert-butylbenzene have been used as testing samples. The fragmentation patterns of the unlabeled molecule and of the natural abundance ¹³C₁-isotopomer have been measured in a time-of-flight mass analyzer by exciting successively the S₁ ← S₀ origins of the ¹²C-monoisotopic molecule and ¹³C₁-isotopomers. Fragmentation mechanisms are not completely clear from the comparison of these mass spectra, but the method can be applied to low concentration enriched compounds labeled in known positions.     

Phase equilibria study of the (N-octylisoquinolinium thiocyanate ionic liquid + aliphatic and aromatic hydrocarbon,or thiophene) binary systems

Binary liquid + liquid phase equilibria for 8 systems containing N-octylisoquinolinium thiocyanate, [C₈iQuin][SCN] and aliphatic hydrocarbon (n-hexane, n-heptane), cyclohexane, aromatic hydrocarbon (benzene, toluene, ethylbenzene, n-propylbenzene) and thiophene have been determined using dynamic method. The experiment was carried out from room temperature to the boiling-point of the solvent at atmospheric pressure. For the tested binary systems the mutual immiscibility with an upper critical solution temperature (UCST) for {IL + aliphatic hydrocarbon, or thiophene} were observed. The immiscibility gap with lower critical solution temperature (LCST) for the {IL + aromatic hydrocarbon} were determined. The parameters of the LLE correlation equation for the tested binary systems have been derived using NRTL equation. The phase equilibria diagrams presented in this paper are compared with literature data for the corresponding ionic liquids with N-alkylisoquinolinium, or N-alkylquinolinium cation and with thiocyanate – based ionic liquids. The influence of the ionic liquid structure on mutual solubility with aliphatic and aromatic hydrocarbons and thiophene is discussed.     

Synthesis and characterization of novel 4-benzyloxyphenyl 4-[4-(n-dodecyloxy)benzoyloxy]benzoate liquid crystal

Liquid crystal (LC) compound 4-Benzyloxyphenyl 4-[4-( n -dodecyloxy)benzoyloxy]benzoate (BDBB) was prepared and characterized. Inverse gas chromatography (IGC) was to be a beneficial analysis method for the research of thermodynamic characteristics of the new LC. Acetate and alcohol isomers were used to examine LC selectivity via the IGC technique at temperatures between 333.2 K and 483.2 K. The retention diagrams of n -heptane, n -octane, n -nonane, n -decane, undecane, dodecane, tridecane, n -butyl acetate, isobutyl acetate, ethyl acetate, n -propylbenzene, isopropylbenzene, ethylbenzene, chlorobenzene, and toluene on BDBB were plotted with temperatures of 483.2–493.2 K. Flory–Huggins interaction parameter and weight fraction activity coefficient at infinite dilution were researched for BDBB.     

Structure determination of sec-butylbenzene rotamers by UV spectroscopy and ab initio calculations

Sec-butylbenzene has been investigated using resonant two-photon ionization (R2PI) and UV–UV hole-burning spectroscopy aided by ab initio calculations. All three conformers predicted from theory are observed in the spectrum, and are assigned by rotational band contour analysis. The most strongly populated conformer (G1) has a gauche arrangement of the side chain dihedral angle τ₂(C₁C_αC_βC_γ). The populations of the anti (A) and the remaining gauche conformer (G2) are about 7% and 2%, respectively. The alpha methyl group is found to significantly affect the conformational preferences in sec-butylbenzene (sec-BB), compared to n-propylbenzene in which the anti conformer is favored.     

Liquid—Vapor Phase Equilibria and the Thermodynamic Properties of Binary Solutions of n-Alkylbenzenes

Liquid—vapor phase equilibria were studied for binary systems formed by n-alkylbenzenes. The contributions of intermolecular interactions to the thermodynamic functions of n-alkylbenzenes and their binary solutions were calculated. The contributions of intermolecular interactions to the Helmholtz energy of binary solutions of constant molar concentrations formed by n-butylbenzene and n-alkylbenzenes were found to depend linearly on the molecular weight of n-alkylbenzene in the homologous series. The corresponding equations were suggested.     

Hydrogen migrations in mass spectrometry. IV—formation of [C6H7]+ in the chemical ionization mass spectra of alkylbenzenes

Using specific deuterium labelling the mechanisms of the olefin elimination reactions leading to formation of [C₆H₇]+ in the H₂ and CH₄ chemical ionizatin mass spectra of ethylbenzene and n-propylbenzene (and to [C₂H₅C₆H₆]+ in the CH₄ chemical ionization mass spectra) have been investigated. The results show that the reaction does not occur by specific migration of H from the β position of the alkyl group to the benzene ring. For ethylbenzene 23–29% of the migrating H originates from the α-position, while for n-propylbenzene H migration from all propyl positions is observed in the approximate ratio, position 1:position 2:position 3=0.30:0.22:0.48. It is proposed that the results can be explained on the basis of competing H migration from each alkyl position involving cyclic transition states of different ring sizes, rather than by H randomization within the alkyl chain.     

Thermodynamic properties of the N-butylisoquinolinium bis(trifluoromethylsulfonyl)imide

A new isoquinolinium ionic liquid (IL) has been synthesised as a continuation of our work with quinolinium-based ionic liquids (ILs). The work includes specific basic characterization of synthesized compounds: N-isobutylquinolinium bromide, [BiQuin][Br] and N-isobutylquinolinium bis{(trifluoromethyl)sulfonyl}imide [BiQuin][NTf₂] by NMR spectra, elementary analysis and water content. The basic thermal properties of the pure [BiQuin][NTf₂], i.e. melting and glass-transition temperatures, the enthalpy of fusion as well as heat capacity at glass transition have been measured using a differential scanning microcalorimetry technique (DSC). Densities and viscosities were determined as a function of temperature. The temperature-composition phase diagrams of 8 binary mixtures composed of organic solvent dissolved in the IL: {[BiQuin][NTf₂] + aromatic hydrocarbon (benzene, or toluene, or ethylbenzene, or n-propylbenzene), or an alcohol (1-butanol, or 1-hexanol, or 1-octanol, or 1-decanol)} were measured at ambient pressure. A dynamic method was used over a broad range of mole fraction and temperature from (270 to 320) K. For all the binary systems with benzene and alkylbenzenes, the eutectic diagrams were observed with an immiscibility gap in the liquid phase existing at low mole fraction of the IL with a very high upper critical solution temperature (UCST). For mixtures with alcohols, complete miscibility was observed for 1-butanol and also an immiscibility gap with UCST in the liquid phase for the remaining alcohols. The typical dependence was observed that with increasing chain length of an alcohol, the solubility decreases. The well-known NRTL equation was used to correlate experimental (solid + liquid), SLE and (liquid + liquid), LLE phase equilibrium data sets.     

Static and dynamic properties of anionic intermolecular aggregates: the I−–benzene–Ar n case

Molecular dynamics simulations on the I^?–benzene–Ar _n clusters have been carried out using an atom(ion)-bond model to describe the nonelectrostatic contribution to the total interaction. Results for I^?–benzene–Ar and I^?–benzene–Ar _n (n = 3, 18 and 25) are presented and some predicted properties are compared with those of the alkali cation–benzene clusters solvated by Ar atoms.     

p, T, x, y data of benzene + n-hexane and cyclohexane + n-heptane systems

The isothermal vapour—liquid equilibria of the benzene + n-hexane and cyclohexane + n-heptane systems have been studied using a dynamic method. The thermodynamic consistency of the data has been tested and the prediction from several empirical and semitheoretical models have been compared with the experimental values of different excess properties.     

Activity coefficients of hydrocarbon solutes at infinite dilution in the ionic liquid, 1-methyl-3-octyl-imidazolium chloride from gas–liquid chromatography

Activity coefficients for hydrocarbon solutes at infinite dilution in 1-methyl-3-octyl-imidazolium chloride have been measured using the medium pressure gas–liquid chromatography method. The hydrocarbon solutes used were n-pentane, n-hexane, n-heptane, n-octane, 1-hexene, 1-heptene, 1-octene, 1-hexyne, 1-heptyne, 1-octyne, cyclopentane, cyclohexane, cycloheptane, benzene, and toluene. Activity coefficients at infinite dilution were determined at the following three temperatures (298.15, 308.15, and 318.15) K. Selectivities for benzene and the hydrocarbons are presented and the results indicate that 1-methyl-3-octyl-imidazolium chloride is a reasonable solvent for the separation of an alkane or an alkene from benzene.     

Thermodynamic properties of the N-octylquinolinium bis{(trifluoromethyl)sulfonyl}imide

This work is a continuation of our wide ranging investigation on quinolinium based ionic liquids (ILs). The study includes specific basic characterisation of the synthesized compounds N-octylquinolinium bromide, [OQuin][Br] and N-octylquinolinium bis{(trifluoromethyl)sulfonyl}imide [OQuin][NTf₂] by NMR spectra, elementary analysis and water content. Differential scanning calorimetry (DSC) measurements gave us properties of the pure [OQuin][NTf₂] i.e. melting and glass-transition temperatures, the enthalpy of fusion as well as heat capacity at the glass transition. Densities and viscosities were determined as a function of temperature. The temperature-composition phase diagrams of 10 binary mixtures composed of organic solvent dissolved in the IL: {[OQuin][NTf₂] + aromatic hydrocarbon (benzene, or thiophene, or toluene, or ethylbenzene, or n-propylbenzene), or an alcohol (1-butanol, or 1-hexanol, or 1-octanol, or 1-decanol, or 1-dodecanol)} were measured at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from (250 to 370) K. For mixtures with benzene and alkylbenzenes, the immiscibility gap in the liquid phase in a low mole fraction of the IL was observed with upper critical solution temperature (UCST) higher than the boiling point of the solvent. In the system with thiophene, the immiscibility gap is lower and UCST was measured. For binary mixtures with alcohols, complete miscibility in the liquid phase was observed for 1-butanol and 1-hexanol. In the systems with longer chain alcohols, the immiscibility gap with UCST was noted. Typical behaviour for ILs was observed with an increase of the chain length of an alcohol the solubility decreases. The well-known NRTL equation was used to correlate experimental (solid + liquid), SLE and (liquid + liquid), LLE phase equilibrium data sets.     

Liquid Solution Densities of Ternary-Pseudobinary Mixtures of (Benzene + Cyclohexane) in the Presence of Tetrachloromethane or <Emphasis Type="Italic">n</Emphasis>-Hexane

Densities have been obtained as a function of composition for ternary-pseudobinary mixtures of [(benzene + tetrachloromethane or n-hexane) + (cyclohexane + tetrachloromethane or n-hexane)] at atmospheric pressure and the temperature 298.15 K, by means of a vibrating-tube densimeter. Excess molar volumes, V_m^E, partial molar volumes and excess partial molar volumes were calculated from the density data. The values of V_m^E have been correlated using the Redlich–Kister equation and the coefficients and standard errors were estimated. The experimental and calculated quantities are used to discuss the mixing behavior of the components. The results show that the third component, CCl₄ or n-C₆H₁₄, have quite different influences on the volumetric properties of binary liquid mixtures of benzene with cyclohexane.     

Miscibility in systems containing aqueous solutions of various alkylbenzenesulfonates, toluene and, n-butanol

Miscibility relationships in four-component systems containing sodium alkylbenzenesulfonates, toluene, n-butanol, and water were studied at 25°C in the hope of clarifying the complex systems used in the “micellar flood” enhanced oil recovery process. Phase boundary curves for the pseudo three-component systems (constant sulfonate/water ratios, 2.5 moles sulfonate per kg water) were determined. The sulfonates included those of benzene, toluene, xylene, ethylbenzene, isopropylbenzene, mesitylene, cymene, methyl-t-butylbenzene, and diisopropylbenzene, in all of which the alkyl substituents are smaller than in the usual surfactants. The phase boundary curves have similar and fairly symmetrical shapes. The amount of n-butanol (cosolvent) required to produce miscibility decreases with increasing number of alkyl carbons on the benzene ring of the sulfonates and seems relatively independent of the isomeric structure. The sodium salt of diisopropylbenzenesulfonate gives the lowest phase boundary curve (least n-butanol required for miscibility) among the nine sulfonates studied.     

Thermophysical properties and phase equilibria study of the binary systems {N-hexylquinolinium bis(trifluoromethylsulfonyl)imide + aromatic hydrocarbons,or an alcohol}

The new quinolinium ionic liquid has been synthesised as a continuation of our work with quinolinium-based ionic liquids (ILs). The work includes specific basic characterisation of synthesized compounds: N-hexylquinolinium bromide, [HQuin][Br] and N-hexylquinolinium bis{(trifluoromethyl)sulfonyl}imide [HQuin][NTf₂] by NMR spectra, elementary analysis and water content. The basic thermal properties of the pure [HQuin][NTf₂] i.e. melting and glass-transition temperatures, the enthalpy of fusion as well as heat capacity have been measured using a differential scanning microcalorimetry technique (DSC) and thermal analysis instrument (TA). Densities and viscosities were determined as a function of temperature. Phase equilibria for the binary systems: {[HQuin][NTf₂]) + aromatic hydrocarbon (benzene, or toluene, or ethylbenzene, or n-propylbenzene), or an alcohol (1-butanol, or 1-hexanol, or 1-octanol, or 1-decanol)} have been determined at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from (270 to 320) K. For all the binary systems with benzene and alkylbenzenes, the eutectic diagrams were observed with immiscibility gap in the liquid phase beginning from (0.13 to 0.28) mole fraction of the IL with very high an upper critical solution temperature (UCST). For mixtures with alcohols, the complete miscibility was observed for 1-butanol and immiscibility with UCST in the liquid phase for the remaining alcohols. The typical dependence was observed, that with increasing chain length of an alcohol the solubility decreases. The well-known NRTL equation was used to correlate experimental (solid + liquid), SLE and (liquid + liquid), LLE phase equilibria data sets. For the systems containing immiscibility gaps, (IL + an alcohol) parameters of the LLE correlation were used to the prediction of SLE.     

Chromatographic properties of fullerene modified with liquid crystal p, p′-azoxyphenetol

Stationary phases for gas chromatography based on liquid crystal p,p′-azoxyphenetol applied onto Chromaton N-AW bearing a layer of C₆₀ fullerene were studied. The thermodynamic properties of the adsorption of n-alkanes and n-alcohols on the mesogen surface were studied at low occupancies. Test mixtures of structural isomers of substituted benzene and polycyclic aromatic hydrocarbons were analyzed in a wide temperature range from 100 to 240°C.     

Excess magnitudes for the benzene + n-dodecane system at 298.15 and 323.15 K

The vapor pressures for benzene + n-dodecane mixtures have been measured using a static apparatus. Values for the excess Gibbs energy have been calculated using a modified form of Barker's method and fitted to a Padé approximant equation. Selection of the most adequate approximant is made according to objective criteria. The results are compared with those corresponding to other benzene + n-alkane systems. The values for the activity coefficient of benzene at infinite dilution calculated from these data agrees very well with the values obtained by gas-liquid chromatography.